Premiere elements 10 will not show the vision in screen part of the monitor. It will play everything audio etc and behaves as normal but there is no vision. I have restarted my computer, I have check if some rectangle is covering. I use a pc.

forumnotifier
I forgot to ention I upgraded to windows 8.1

bigredden
What is the video card/graphics card that your computer uses? If it is NVIDIA GeForce, you are probably involved with the Premiere
Elements 10/NVIDIA GeForce issue which forces the user to roll back the driver version to about May 2013. Since your computer
operating system is Windows 8.1 (assumed 64 bit), there may not be a NVIDIA GeForce driver version that goes back to May 2013
for your computer operating system.
Please let us know the name of your computer's video card/graphics card. If you have a card other than NVIDIA GeForce, then
we can explore other troubleshooting strategy to resolve you issue.
Please read the Announcement at the top of this forum that details the issue and describes the how to resolve with the driver
roll back (if possible). The following is a copy/paste of that Announcement for your convenience.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are
experiencing Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting
needs to be rolling back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this
applies to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary
to get rid of the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working
Premiere Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is
expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10
NVIDIA reports http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driverroll back
can be found http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
We will be watching for your follow up.
Thank you.
ATR

Similar Messages

Premiere elements 11 does not recognize the external ASUS Blu-ray burner

Premiere elements 11 does not recognize the external ASUS Blu-ray burner

More on what Hunt talked about...
Things and Software to AVOID when authoring/burning a disc... says Encore, but also applies to Premiere Elements and disc burning
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
And a solution... to try even if you do not have the problems described above
Set your DVD output to a folder on your hard drive and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)

My gen 4 ipod shuffle is not showing the green light when I switch it on (Green area shown). But when I plug it into the computer there initial orange blink and then solid orange. What wrong with it and how can I fix it.

My gen 4 ipod shuffle is not showing the green light when I switch it on (Green area shown). But when I plug it into the computer there initial orange blink and then solid orange. What wrong with it and how can I fix it.

Hello Korawees,
I was researching the issue you are describing and had a recommendation. The device is very simple, so the software troubleshooting for it is pretty limitted so I think you shoud restore the iPod shuffle and re sync the content. That way, if it is a software issue, this will fix it. Here is the article named Restoring iPod shuffle to factory settings found here: http://support.apple.com/kb/HT1481.
Before Starting
It is important to understand the difference between "update" and "restore." Update does not affect your settings or songs, it simply installs updated software that controls iPod shuffle. Restore erases the disk and restores iPod shuffle to its original factory condition with updated software. If you only need to update iPod shuffle, this should be done on the computer where music is normally synced. Updating on another computer will result in all songs being removed from iPod shuffle.
Warning: Because Restore erases all songs and files on iPod shuffle, make sure to back up any files you've saved on iPod shuffle. Your songs, podcasts, and audiobooks can be synced back to your iPod shuffle if the items are part of your iTunes library.
How to restore iPod shuffle
Ensure that you have an active Internet connection as new versions of iTunes and iPod Software may need to be downloaded to your computer.
Download and install the latest version of iTunes if you do not already have it installed.
Open iTunes, and then connect iPod shuffle to your computer.
After a few moments, iPod shuffle will appear in the Devices section on the left side of the Tunes window.
Select iPod shuffle under Devices and you will see information about it appear in the main iTunes window under the Summary tab/button for iPod shuffle (3rd and 4th generation) or the Settings tab/button for iPod shuffle (1st or 2nd generation).
The Version section tells you whether iPod shuffle is up to date or needs a newer version of the software.
Click the Restore button. You will be presented with one or more restore options that may prompt iTunes to automatically download the latest iPod Software. The 4-possible restore options are:
Restore Option 1: Restore - Restores with same iPod Software version already on iPod.
Restore Option 2: Use Same Version - Restores with same iPod Software version already on iPod even though a newer version is available.
Restore Option 3: Use Newest Version - Restores with the latest iPod Software currently on your computer.
Restore Option 4: Restore and Update - Restores after downloading the latest iPod Software on your computer.
If you are using a Mac, a message will appear prompting you to enter an administrator’s name and password.
A progress indicator will appear on the computer screen indicating that the restore process has started. Do not disconnect iPod shuffle during the restore process.
After the restore process is complete, the iPod shuffle's status light will flash orange continuously. The iPod Setup Assistant window will appear asking you to name your iPod and choose your syncing preferences as you did when you connected your iPod shuffle for the first time.
When you come to step 7, I recommend Restore Option 4.
Take care,
Sterling

HT201343 I have an apple TV 2 which mirrors my ipad and iphone beautifully. I want to do the same with my 'later 2011' macbook pro but there is no option I have checked firewalls and done all updates etc but no joy...PLEASE HELP!

I have an apple TV 2 which mirrors my ipad and iphone beautifully. I want to do the same with my 'later 2011' macbook pro but there is no option I have checked firewalls and done all updates etc but no joy...PLEASE HELP!

According to:
http://www.apple.com/uk/osx/specs/
Your MBP should be compatible, BUT it needs to be running Mountain Lion.
AC

I purchased premiere elements 13. I followed the instructions. Loged into my account. Located my order number, but can not find the order detail page to download my product

I purchased premiere elements 13. I followed the instructions. Logged in to my account. Located mu order number but could not find the order detail page to click the download your product button. I was also asked to download the Akamai download manager which i don't understand why. Also It said that once the manager was installed the download would appear in the browser which it never did. So, I have no idea if it did download or not. Not sure what else I can try. Would love some help.

The Akamai download manager is used to download the software you purchased. Try the download resources below. The second one does not use the download manager.
PE 10, 11, 12,13 - http://helpx.adobe.com/premiere-elements/kb/premiere-elements-10-11-downloads.html
You can also download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

Premiere Elements 12: Rendering not on the exact frames

I'm using Premiere Elements 12 and cutting MOV files in most cases.
Now I detected that PE isn't rendering always correctly: In some cases the rendered file shows at the end of a clip 1 more frame than in it shows in the cutting window.
Meaning: The original MOV clip contains 2 scenes. I import the MOV file into my PE12 project and put it into the cutting window.
Then I'm moving the viewing bar of the cutting window exactly to the end of scene 1 and click "cut".
When I separate both scenes in the cutting window, PE12 show exactly the result I want to get: scene 1 ends with the last frame of scene 1, scene 2 starts with the first frame of scene 2.
Then I delete scene 2 and render scene 1 to a MP4 file.
When viewing the result file in any player (e.g. Windows Medie Player, VLC, Quicktime), all these players show at the end of scene 1 the first frame of the original scene 2.
Again: even if I couldn't see this first frame of scene 2 in the cutting window!
So the cutting window doesn't show EXACTLY the result I will get!
I already tries different ways of importing the original MOV files, different codecs and so on - nothing helped.
In roughly 50% the cuts of the final file are like planned, the other 50% of cuts show one frame too much at the end of a scene.
Problem: In a lot of cases the scenes are already very short, so I can't give always "one frame plus" before I cut: sometimes I really need every single frame.
And I can't believe that a programm like Premiere Elements should not be able to cut exactly at the frame where it is supposed to!
So does anyone have a clou what I'm doing wrong?
Or this this a knows issue of PE?
Thanks in advance!

Dear ATR,
I now found some time to check this out.
Let me describe exactly what I'm doing:
Source file is a MOV file full HD.
Drag & drop it onto the timeline.
Set half frame option (is it called "field"?) to "reduce flickering" - because if I don't (default option: "none"), the rendered result is not that stable, meaning the picture is totterling a little. Is this normal? Could this setting cause the trouble with the last frame at cutting/rendering?
Switched Timeline to frame display instead of timecode.
By the way: this CTRL + clicking the area above the Timeline doesn't work ...
Moved the Timeline bar with the arrow keys to the position where I want to cut; the Monitor Window above the Timeline showed the first frame of scene 2. Doublechecked by moving the cursor with the arrow keys one frame forward and back again to really got the right position (twice). Clicked "cut" icon on Timeline.
Repeated the same at the end of scene 2 - the Monitor showed the first frame of scene 3.
Moved scene 2 to another position on the Timeline with the mouse (drag & drop).
Checked cuts on the timeline: scene 2 showed the first and last frame as it should.
Repeated all this with 10 scenes from the original MOV file, brought all of them into a new position and thus order.
Deleted the rest of the original MOV file from the timeline.
Put the 10 scenes together, placed them at the left side of the Timeline.
Rendered the result.
Settings: AVCHD - MP4
PAL, 1920 x 1080 px, 30 fps, Widescreen 16:9, Profile: High, Level: 5.0
rendern with max depth: "no"
VBR, 2-path
target: 15 mbps
max: 25 mbps
Audio; AAC, stereo, 48 Khz, Quality: high, 160 kbps
Priority: Bitrate
The result file showes on 4 of 10 scenes that one frame too much at the end of the cut scene.
And it always happens at the same scenes, not randomly!
So it does not depend if I'm viewing frames or timecode in the Timeline. Surprise!
But what I detected: When I'm using a "new project", this issue does not occur!!!
So I looked at the project settings: The "new project" I let the default settings be, because it I should import a file and drag this to the Timeline, the software would give me a message if the project settings should not match.
Default settings are: NTSC-ADCHD-AVCHD 1080p60.
But what I normally do is using a template file with all my intro, outro, audio, logo and so on, copy that *.prel file where I want to edit it, rename it and then open this copied prel file. Here I the project settings show:
HD 1080i, 25 fps, 1920 x 1080 (I guess I once selected this under PAL because there is no PAL 1080p25 oder 30, just 1080p50). And I'm from Germany, so I chose PAL instead of NTSC ...
So I guess this makes a difference - even if I do not have a clue, why.
Big question now: How can I chance my project settings in my template file without making it anew?
Because I cannot copy all the objects from one project to another, right? At least I never managed to do so...
To built the template anew would take about 6 hours, and on this basic template are based 6 more templates for special formats. So makeing all templates anew would cost me up to 2-3 days!!!
So I really hope for a better solution
Kind regards,
Lutz

When posting to a forum the new version of Firefox does not show the post. When I start up IE and go to the forum there is the post. However Firefox 4 will not show the post. How can I fix this issue?

Recently I upgraded to Firefox 4. I frequent various forums where I post advise on various subjects. I am finding that version 4 is showing the threads in the forums, allowing me to log in and to post. However the posts as sent in are not coming up at all, even if I get out and return, the page is not "refreshed."

this is a follow up from the profane post earlier....
i have done this twice in two other posts..
here is my problem.. i started off trying to update itunes, it failed twice and said i needed to install manually via tools.
the only place to get to tools is the pop up box that appears when you click check for updates.. if there is an available update then the pop up shows up with the quick time and itunes files to download. so i finally figured that out. i clicked on tools and manual update, four files were saved to a file. Apple mobile device support, another one similar, itunes, and another one i cant remember. I only downloaded the itunes file seeing as though thats all i needed to accomplish in the first place.
so then i restarted my computer bc you need to reboot and then reopen itunes for update to take effect. once i have itunes back open i plugged in my new 5s which i am trying to sync to my computer to get all my stuff back bc i lost my previous phone over the weekend.. once i plugged the phone in an error stating i needed to unistall the apple mobile device support and itunes and then reinstall. well i dont know where those files were originally stored on my computer AND since my itunes was updated, just not the other 3 associated files, when i click check for updates it says its up to date and then pop up containing the quick time and itunes does not pop up thus i cant get back to the tools tab to manually save the 4 files again.
so i was just going to uninstall itunes all together and then i thought well what happens if it erases all my photos apps songs etc... which would defeat the whole purpose in the first place of me trying to sync my new phone to get all my stuff back.
so i literally have no idea what to do at this point.. if you have read this you are probably just as confused as me...

Installed Digital Edition on the computer but it does not recognize the Nook HD when I plug it in and open Adobe....how can I transfer a book from computer to Nook if it doesn't recognize it....?

I have just installed Adobe Digital Edition on my computer. I closed it and then plugged in the new Nook HD and opened the Digital Edition back up - it does NOT list the Nook in the left side so I cannot move the book to the NOok....how do I get this recognized so it works. ?

Please have a look at the similar thread, Authorizing my nook. Hope the solution mentioned in this thread solves your problem.

My iPad is not showing the bluetooth symbol. I am trying to connect to Livescribe3 pen but the app is saying the iPad is not Bluetooth ready.

Have just purchased Livescribe3 connected to iPhone no problems. However the livescribe App on the iPad says that my device (the iPad) is not Bluetooth smart ready. I note that the bluetooth symbol is not showing on the app.
The screen for the bluetooth on the iPad shows that it is on and attempting to discover devices however the pen doesn't show there either.

Try resetting it by holding the power and home keys down until the Apple logo appears.
Barry

ITunes not showing the file wich is playing

when using the grid albums view whenever i access an album and start playing a track, it doesnt show the little gray arrow next to it and the speaker, so i cant see in the playlist which is the one thats being played
if i use coverflow or simple playlist it shows it
if i start playing it with the grid view and then change the view it doesnt show
if i start playing in any of the other two views and then change to grid it stops showing it
it seems a stupid thing...but id like the little mark on which is the file im listening to
is it just me, or itunes is like that?
im usint iTunes 9.0.3.15

I just checked and you are right. I can't be sure if it ever did as I don't use grid view normally.
You still see the tack playing in the normal way at the top of the screen.
Why not use the iTunes feedback option on the iTunes help menu to report this.

HT201272 I purchased a film a while back and have the invoice to prove it and its shown on my purchased list however I went to put it on my phone and its not showing the iCloud icon to download it even though I already bought it.any ideas?

I purchased a film a while back and have the invoice to prove it and its shown on my purchased list however I went to put it on my phone and its not showing the iCloud icon to download it even though I already bought it.any ideas?

If you downloaded it on your computer's iTunes then it should be in the Books part of your library, if you downloaded it on an iOS device then it should be in the Music app on it. If it's not there, and you don't have a copy of it on your backup of your library, then you will need to try contacting iTunes Support and see if they will grant you a re-download (audiobooks are currently a one-time only download from the store, which I believe is a requirement from audible.com who supply them) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

WBS Summary does not shows the correct Orignial Duration

Hi Friends,
Currently I am using WBS Summary or Level of Effort type of activity on top of my every WBS and I am assigning all my resources to that activity to save the time rather than assigning resources with each and every activity.
But, in my new project I have the activities which has a scattered durations like one activity starts on 3 rd day another starts on 25th day. So, my project is not planned to go smooth or linear. So, if I am counting the total duration for that particular WBS is 25 days but in WBS Summary it shows me 250 days and it is also spreading my resources for 250 days while I am using the resources only for 25 days. Still, the resource usage and costing shows me the same amount.But, I am concern about the resource Usage Assignments which is not correct.
So, I will appreciate any kind of solution with this problem and it will make my life easier.............
Thanks in advance
Edited by: user13349410 on Jul 6, 2010 10:19 AM

Jawad,
i agree the methods you mentioned are good general advice when it comes to sound planning. but they are considerably more time consuming than proper
"who does what" resource assignment to tasks. further more #2 and #3, may need even more manual work to accomodate changes into the project schedule or scope or when dealing with conflicting requirements.
proper resource loading of your schedule is preferable, even using conventional default settings such as:
- linear distribution of effort (units/ costs). no curve or future bucket planning which IMO, depending on required level of detail, can prove to be overkill;
- activity driven resource dates. whenever possible, it is much simpler to "split" activities or better yet create as many as you need in the first place, so that resource allocation start/finish dates coincide with activity start/finish dates for all resources assigned to the activity, rather than having resource lags, non-linear curves or future buckets;
- no artificial constraints on activities, but proper relationships of required type and lag;
- no fixed artificial non-working periods set in activity and/or resource calendars (other than legal/ organisation/ project standards dictate or are so set by technical, workflow, environment or availability reasons that may apply).
especially since calendars are likely to have different requirements, when existing calendars are reused within project and especially in other projects (global calendars).
best regards,
Tibi

Premiere Elements 13 issue with the mouse on When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip rom the mouse. The clip follows my mouse movements and goes to other places in my

Premiere Elements 13 issue with the mouse on MAC OSX Yosemite 10.10.1
When I select a clip of video and move to a different place in my time line, Premiere Elements 13, will not release the clip from the mouse.
The clip follows my mouse movements and goes to other places in my time line.
I try to delete these extra insertions, but the mouse will not release the clip.
Action I’ve taken: I’ve re-installed Premiere Elements 13. Problem remains.
This issue has consumed too much of my time and does not go away. It ruins my video.
Help please.
Thanks

I tried using the Guest Account on my Mac. In the Guest Account, Illustrator works perfect!
Then I started wondering what processes (tools/tweaks) I run by default on my account. Turned out the problem was called by a little background tool called RightZoom. RightZoom let's the green 'zoom' button always maximize your current window.
So thanks! Problem solved!

Since I migrated my files from one Mac to another and am now running Yosemite, Photoshop Elements 9 (adequate for what I do) is not showing the previous functionality on some of the tools. I have uninstalled/reinstalled twice to no avail.

Since I migrated my files from one Mac to another and am now running Yosemite, Photoshop Elements 9 (adequate for what I do) is not showing the previous functionality on some of the tools. I have uninstalled/reinstalled twice to no avail. Is there a fix? Also, when I tried to update, it comes up with this error.

I have a similar problem. I found out that my macbook air created a new USER with my former's computer user name. You can check that by going into System Preferences -> User & Groups, and see if a "Other user" has been created. You have to login under this new USER to find your transferred contacts in the address book.
My problem is that I do not know how to merge the 2 USER logins or transfer the data from the new USER created into the existing one.

My wife ran the battery down in her shuffle. When I plug it in to the wall or computer, it will blink red solid for about 3 seconds and then shut off. Is the battery that dead, or is something else wrong. ITunes does not show the shuffle

My wife ran the battery down in her shuffle. When I plug it in to the wall or computer, it will blink red solid for about 3 seconds and then shut off. Is the battery that dead, or is something else wrong. ITunes does not show the shuffle

Hi Jennsman40,
Welcome to Apple Support Communities.
If this symptom persists even after you charge your iPod Shuffle, see this page for some troubleshooting steps:
http://www.apple.com/support/ipodshuffle/assistant/itunes/
Best,
Jeremy

Premiere elements 10 will not show the vision in screen part of the monitor. It will play everything audio etc and behaves as normal but there is no vision. I have restarted my computer, I have check if some rectangle is covering. I use a pc.

Similar Messages

Maybe you are looking for