Prepare ALV data for later display

Hi, I have an ALV report that may run (and prepare ALV data) for a long time depending on selection screen parameters settings.
I need the user to be able to select whether he wants to display the data immediately (foreground run), or save the result in db (run in background) and as a next step in the same program to display in foreground the previously saved data.
I can do it manualy via custom table and custom logic, bud before I do so I would like to ask - is there a better or some standard SAP solution/framework? Because I think this type of requirement may be needed quite often, and in past have seen somethink like this in some SAP transaction I but I dont remember it.
PS: I know about a possibility to run in background and check spool for an ALV LIST output, but the user needs to see ALV GRID with functions like sorting, export, no page headings etc.
Thanks in anvance, B.

Research semi-presistent data. Personally, I would create an INDX-like table (research this) and export the data to that table. Upon request to display, import the data from your INDX-like table, construct and call your ALV.
This is useful, too, when you have a variety of reports for a module, perhaps SD. One can identify all the columns needed and select and assemble the data, and then store in an INDX-like table for later. Then each report program can import the data, utilize the columns and rows needed to present that particular report, without reselecting all the data from the database.

Similar Messages

How to continuously do AOAI and buffer the data for later use?

Is there a way to do simultaneous AI and AO and keep the data in the buffer until I am finished with reading, then read the buffer and save the data to disc. I want to acquire 1000 scans on up to 10 chanels at 10 000 Scans/s, while generating one output signal.
I have seen plenty of continuous AIAO examples, but all they do is show the data. I don't mind not viewing the data, all I want is to hold it for later analysis, while avoiding writing to disc as I fear this will slow the process too much. Or would a different approach than simultaneous AIAO be more appropriate?
I am using LabView 6.1 with 6024E DAQ card on a P-IV 1.5GHz.

Use this vi MainProg.vi in the llb
i use a same engine to acquire at 2 MS/s and generate at 3 MS/s
"Fil" a ?crit dans le message de news:
506500000008000000C8620000-1031838699000@exchange.ni.com...
> Is there a way to do simultaneous AI and AO and keep the data in the
> buffer until I am finished with reading, then read the buffer and save
> the data to disc. I want to acquire 1000 scans on up to 10 chanels at
> 10 000 Scans/s, while generating one output signal.
> I have seen plenty of continuous AIAO examples, but all they do is
> show the data. I don't mind not viewing the data, all I want is to
> hold it for later analysis, while avoiding writing to disc as I fear
> this will slow the process too much. Or would a different appro
ach
> than simultaneous AIAO be more appropriate?
> I am using LabView 6.1 with 6024E DAQ card on a P-IV 1.5GHz.
[Attachment 4x10KSps to Disk& generate AO.llb, see below]
Attachments:
4x10KSps_to_Disk&_generate_AO.llb ‏128 KB

Backing up raw data for later - how?

I just made my first DVD from miniDV footage using iMovie and iDVD and it all worked fine. However I want to have the raw data duplicated somewhere and I can't keep it on my computer (too large). the iMovie file is 12gig, so what do i do? is there a way to compress it? what is the best way to preserve the original data?
Thanks so much - sara
ps - i tried breaking up the iMovie Project into smaller projects and archiving that data
(using File:Burn project to disc) so I could make other movies at
another time. That goes well and the files appear on the DVDs etc
but then I cannot access them. The DVD initially says I have read
write ability and then after I burn it, I have lost all my
permissions (it goes grey) and I can't open it, copy it or import
it. (It does actually try to copy and import but then says some
clips are missing and it can't continue. aaargh. ) I'd paste a
screen image here of the Info panel but I can't remember how to make
a screen shot
powerbook g4 Mac OS X (10.4.5) iLife '06

Here's the strategy I'm pursuing. It may not fit your needs but I figured I'd mention it.
I'm making DVDs out of hours of home video. I'm laying the tapes down on DVD in the sequence that's on the tape (i.e., chronological) with a little editing for each "scene". It occurred to me as I did this that it would be fun to, say, make a DVD of first days of school or birthday parties, etc. So I thought about saving the raw footage just as you are with the same questions about media, size, etc.
There are products out there (DVDxDV is one) that claim to let you read unencrypted DVDs and export in QT or DV format for re-importing back into a video editor. If the resulting quality of the "captured" video is as good as the original, then I think that's a good option.
Mike

Which vi ist best to save data for later usage in GNU R?

Hi,
I want to save values of several instuments every 10 ms into a file (mydata.csv) and evaluate the data with GNU R.
GNU R can read .csv files and use first line as names and # lines as comment.
mydata.csv should look like this:
# Date: 2002-12-23
# Voltage of ABC
# Comment: Used new probes
time, TAB voltage, TAB temperature
12, TAB 23, TAB 43
34, TAB 43, TAB 556
is there a vi that can create such file?
================================
system: Win7 and debian stable

You can use the Write to Spreadsheet File or the lower level Write to Text File.

Alv report for multiple record insertion

hi,
i'm new to abap. i'm using alv report for record display and insertion. how can i insert multiple records from alv to my table??

well that can be achieved only by running BDC inside alv report to enter the entries.and in that too you can append or edit single entries only
reward if useful
regards
vivek

Changing layout of ALV to excel and displaying the data there

Dear All,
My requirement is that I have to develop an ALV report, and also plot the graphs for the same.
I need different types of graphs, so I have searched on SDN, and I found out a blg:-
"Report with a Graph.. An Approach!"
Here is what the person has done:-
I developed a simple ABAP report using ALV and just dumped all my data on it.
After this I downloaded the Standard Excel template available in the ALV.
Defined my own worksheets in this template, wrote some macros to pick up the data from the RawHeader sheet, which is available by default and will contain the ALV data.
I inserted 1 chart in this Excel template. In this chart I used the same chart type as was being used by the user for his graph. Just right clicked on the Graph area and made the changes in the source data and made it point to the sheet containing the final data.
Thats it my job is almost done.
After this uploaded this template back into the report output through
the layout settings->Change Layout Tab.
Save it as a variant and made it a default. (Do not default it if you have more than 1 user and more than 1 template. Select the appropriate variant for the appropriate user and then display)
Well, this also was not that easy as I had thought. I landed up into 1 trouble.
In my report the number of columns displayed was not constant and kept changing based on the input. This fact was taken care by designing a variable field catalogue. But now I had gone past the simple ALV display and was giving the output in an Excel sheet using a pre-defined template. Well, I immediately found a solution to this with the set_frontend_fieldcatalogue method of CL_GUI_ALV_GRID class and fixed the field catalogue every time after calling the set_table_for_first_display method. This solved most of my problems, which were not many though.
Now here are my issues:-
I have developed the ALV report, and I have also changed the layout to excel.
But, I am unable to get the ALV Report data in the RawHeader Sheet, which is available by default.
Could anyone please guide me through this method??
It is urgent.
Points are assured for helpful answers.
Thanks and regards,
Prerna

Hi Satya Priya,
Do I have to create my own template, or the Standard ones available will do?
HEre is what I do:-
Once I get my ALV output, I goto Change LAyout->View tab.->Prefered view->Microsoft Excel.
Here I get a list of available excel templates There are 2:-
sap_mm.xls, and sap_om.xls
I select one of these, and the excel spreadsheet is displayed on the ALV screen.
But the re is another button, "Upload Document to BDS".
Do I have to upload one of the above templated to BDS?
And please tell me in detail, what is BDS???
Thanks for your help, and waiting for reply,
Prerna

Devloped an ALV report for daily cash receipts for selected date range

hi,
             how to devlop an ALV report for daily cash receipts for selected date range.for this report what are the tables and fields we have to use.what is the selectionscreen&what is logic.give me sample report.

Hi,
You can develop simple reports using Report Painter.
You may be also interested in:
Check report SAPMF05A for credit memo
See the following Std reports on Payment Advices execute the Tcodes:
S_ALR_87009888
S_ALR_87009889
S_ALR_87009890
S_ALR_87009891
S_ALR_87009892
S_ALR_87009893
S_ALR_87009978
S_ALR_87009979
S_ALR_87009980
S_ALR_87009981
S_ALR_87009982
S_ALR_87009983
S_ALR_87010056
S_ALR_87010057
S_ALR_87010058
S_ALR_87010059
S_ALR_87010060
S_ALR_87010061
S_ALR_87010066
S_ALR_87010067
S_ALR_87012106
S_ALR_87012107
S_ALR_87012108
S_ALR_87012109
S_ALR_87012110
S_ALR_87012111
S_ALR_87012116
S_ALR_87012117
S_ALR_87012200
S_ALR_87012201
S_ALR_87012202
S_ALR_870122
S_ALR_87012204
S_ALR_87012205
S_ALR_87012350
S_ALR_87012351
S_ALR_87012352
S_ALR_87012353
S_ALR_87012354
S_ALR_87012355
sample ALV report:
tables:
marav. "Table MARA and table MAKT
Data to be displayed in ALV
Using the following syntax, REUSE_ALV_FIELDCATALOG_MERGE can auto-
matically determine the fieldstructure from this source program
Data:
begin of imat occurs 100,
matnr like marav-matnr, "Material number
maktx like marav-maktx, "Material short text
matkl like marav-matkl, "Material group (so you can test to make
                        " intermediate sums)
ntgew like marav-ntgew, "Net weight, numeric field (so you can test to
                        "make sums)
gewei like marav-gewei, "weight unit (just to be complete)
end of imat.
Other data needed
field to store report name
data i_repid like sy-repid.
field to check table length
data i_lines like sy-tabix.
Data for ALV display
TYPE-POOLS: SLIS.
data int_fcat type SLIS_T_FIELDCAT_ALV.
select-options:
s_matnr for marav-matnr matchcode object MAT1.
start-of-selection.
read data into table imat
select * from marav
into corresponding fields of table imat
where
matnr in s_matnr.
end-of-selection.
Now, we start with ALV
To use ALV, we need a DDIC-structure or a thing called Fieldcatalogue.
The fieldcatalouge can be generated by FUNCTION
'REUSE_ALV_FIELDCATALOG_MERGE' from an internal table from any
report source, including this report.
The only problem one might have is that the report and table names
need to be in capital letters. (I had it )
Store report name
i_repid = sy-repid.
Create Fieldcatalogue from internal table
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
       EXPORTING
            I_PROGRAM_NAME         = sy-repid
            I_INTERNAL_TABNAME     = 'IMAT' "capital letters!
            I_INCLNAME             = sy-repid
       CHANGING
            CT_FIELDCAT            = int_fcat
       EXCEPTIONS
            INCONSISTENT_INTERFACE = 1
            PROGRAM_ERROR          = 2
            OTHERS                 = 3.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM       = i_repid
            I_STRUCTURE_NAME         = 'marav'
            I_DEFAULT                = 'X'
            I_SAVE                   = 'A'
       TABLES
            T_OUTTAB                 = imat.
IF SY-SUBRC <> 0.
    WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
Hope this will help.
Regards,
Naveen.

I have only a single texbox.i want to display names , date,priortiy in the same textbox when i typed @ names should be display names like when u type comment in facebook for particular person it will display name. when i type ! date should be display and

i have only a single texbox.i want to display<big style="margin:0px;padding:0px;border:0px;color:#111111;font-family:'Segoe
UI', Arial, sans-serif;line-height:normal;"> names , date,priortiy </big>in the same textbox <big
style="margin:0px;padding:0px;border:0px;color:#111111;font-family:'Segoe UI', Arial, sans-serif;line-height:normal;">when i typed @ names should be display names</big> like
when u type comment in facebook for particular person it will display name. when i type ! date should be display and when i type * priority should be display in same textbox like
example <big style="margin:0px;padding:0px;border:0px;color:#111111;font-family:'Segoe UI', Arial, sans-serif;line-height:normal;">@
names !today date or tomorrow date etc * priority high,low ,medium etc</big>

This is my first time posting here, so I'm sorry, I re-read my post several times and honestly did think I provided enough information, but you're right, it wasn't the right kind. So please (continue to) bear with me, I'm really not trying to be ignorant. I honestly assumed the issue was something I was doing wrong in Bridge, nothing to do with my computer specs.
I am using a late-2008 Macbook, running Yosemite 10.1.1 (screenshot below)
On the Mac I am using Bridge CC 6.1.1.115 and Photoshop CC 2014 (2014.2.1 release, 20141014.r.257 x64)
Here is a link to the System Info from Photoshop on the Mac
Here is a screenshot of my System Overview on the Mac
Here is a screenshot of my Photoshop performance preferences on the Mac
I am also using a Dell desktop with Windows 8, running Photoshop CC 2014 (2014.2.1 release, 20141014.r.257 x32) and Bridge CC 6.1.0.116 x32 (on a separate CC account with separate files that I don't try to sync or anything)
Here is a link to the System Info from Photoshop on the Windows computer.
Here is a screenshot of the system overview on the Windows
Here is a screenshot of my Photoshop Performance preferences on the Windows computer
I work with jpg, psd, ai, svg, and pdf files. Most of my stacks are three different file types of the same image, usually jpg, psd/ai, and pdf.
I have not recieved any error messages
I am not having issues opening raw files, I am not having printing issues, I have listed the troubleshooting steps I have taken.
Is there any information you need that I missed? I'm trying not to be a dingus, but I'll have to ask you to be patient with me in the meantime. I haven't ever looked up half the hardware/software details that were suggested and I don't know how to off the top of my head, so I provided what I already knew how to

BPM reporting not displaying data for newly added field

Hello All,
I have a BPM process up and running fine. I have added reporting for monitoring no. of context field. I have also created a VC model for displaying the BPM report data. However, VC application is displaying only the context field that I had selected initially during the New Reporting Datasource creation. It'd not display the reporting data for the field that I added later.
Please help

Hi Apoorva ,
Have you checked in the process repository whether your new process is activated or not?
Thanks & Regards,
Rohit

To make different colours for the columns of ALV report in Grid display.

Hai Friends,
                   I have created an ALV report in grid display method by using the call function reuse_alv_grid_display.
I have obtained the report.In that report i want to change the colour of each column.Plz provide the answer with a sample program.
                Thank u.

hi i had a program for the rows with diff colors....do the same thing for the columns..
REPORT zdemo_alvgrid                 .
TABLES:     ekko.
type-pools: slis.                                 "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
line_color(4) type c,     "Used to store row color attributes
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
      wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
      gd_tab_group type slis_t_sp_group_alv,
      gd_layout    type slis_layout_alv,
      gd_repid     like sy-repid.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform display_alv_report.
*&      Form BUILD_FIELDCATALOG
      Build Fieldcatalog for ALV Report
form build_fieldcatalog.
fieldcatalog-fieldname   = 'EBELN'.
fieldcatalog-seltext_m   = 'Purchase Order'.
fieldcatalog-col_pos     = 0.
fieldcatalog-outputlen   = 10.
fieldcatalog-emphasize   = 'X'.
fieldcatalog-key         = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'EBELP'.
fieldcatalog-seltext_m   = 'PO Item'.
fieldcatalog-col_pos     = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'STATU'.
fieldcatalog-seltext_m   = 'Status'.
fieldcatalog-col_pos     = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'AEDAT'.
fieldcatalog-seltext_m   = 'Item change date'.
fieldcatalog-col_pos     = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MATNR'.
fieldcatalog-seltext_m   = 'Material Number'.
fieldcatalog-col_pos     = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MENGE'.
fieldcatalog-seltext_m   = 'PO quantity'.
fieldcatalog-col_pos     = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'MEINS'.
fieldcatalog-seltext_m   = 'Order Unit'.
fieldcatalog-col_pos     = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'NETPR'.
fieldcatalog-seltext_m   = 'Net Price'.
fieldcatalog-col_pos     = 7.
fieldcatalog-outputlen   = 15.
fieldcatalog-datatype     = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname   = 'PEINH'.
fieldcatalog-seltext_m   = 'Price Unit'.
fieldcatalog-col_pos     = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
      Build layout for ALV grid report
form build_layout.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text       = 'Totals'(201).
Set layout field for row attributes(i.e. color)
gd_layout-info_fieldname =      'LINE_COLOR'.
endform.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
      Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
            i_save                  = 'X'
       tables
            t_outtab                = it_ekko
       exceptions
            program_error           = 1
            others                  = 2.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
data: ld_color(1) type c.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
*Populate field with color attributes
loop at it_ekko into wa_ekko.
ld_color = ld_color + 1.
Only 7 colours so need to reset color value
if ld_color = 8.
    ld_color = 1.
endif.
concatenate 'C' ld_color '10' into wa_ekko-line_color.
wa_ekko-line_color = 'C410'.
modify it_ekko from wa_ekko.
endloop.
endform.                    " DATA_RETRIEVAL
regards,
venkat

Hideing a Column in ALV Table which is Displaying the POWL Query data

Hi SDNers,
I want to hide a column of ALV Table which is displaying my POWL Query data in it and hideing should be based on the Role as well. i.e few of the role the column shoudl be hidden and few of the roles should have the Column visible.
waiting for the Valueble Answers.
Thanks & Regards,
Govindu

Hai Kris,
    I took help from ur link and i declared a global attribute request_number.
and i created an event handler ON_ALV_INSERT and did the follwing coding for giving default value wen ever am inserting new row.
FIELD-SYMBOLS: <wa_row> LIKE LINE OF r_param->t_inserted_rows.
DATA bill_details TYPE REF TO zdom_bill_detail.
LOOP AT r_param->t_inserted_rows ASSIGNING <wa_row>.
    bill_details ?= <wa_row>-r_value.
    IF bill_details->REQ_NUMBER IS INITIAL.
DATA lo_nd_bill_detail TYPE REF TO if_wd_context_node.
DATA lo_el_bill_detail TYPE REF TO if_wd_context_element.
DATA ls_bill_detail TYPE wd_this->Element_bill_detail.
navigate from <CONTEXT> to <BILL_DETAIL> via lead selection
lo_nd_bill_detail = wd_context->get_child_node( name = wd_this->wdctx_bill_detail ).
lo_el_bill_detail = lo_nd_bill_detail->get_element( index = <wa_row>-index ).
      lo_el_bill_detail->set_attribute(
        EXPORTING
          name = 'REQ_NUMBER'
          value = wd_comp_controller->request_number
Wen am setting the value of wd_comp_controller->request_number to my context attribute am getting NULL object ref error.
lo_el_bill_detail->set_attribute(
    name = `REQ_NUMBER`
    value = wd_comp_controller->request_number ).
Pls give some suggestions,
Thanks in Advance,
Nalla.B

Generic function displaying alv grid for undefined structure

Hi experts,
I'm doing my first steps on abap development (Totally noob).
I'm writing some little reports based on simple selections (1 or 2 tables).
In every report, I've defined a structure (internal table) that i'm displaying with an ALV Grid.
In every report, I need to create a catalog for my structure in order to make the alv grid working.
What I would like to do is :
Create a function that receives a undefined structure (for all my reports) as a parameter.
This function sould create the catalog for the coresponding structure and call the alv grid function to display the data's contained in this structure.
The goal is : In every report, I would like to use this function to show the selected data's without taking care of catalogs, alv grid, etc...
Is it possible ?
I really don't see how I can do that... Does anybody already tried something like that ?
Thank you for your help
Regards
Quentin

Hi,
In this method Pass the structure name-
CALL METHOD gh_grid->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME = "<- here pass the structure
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
IS_LAYOUT = "<-Layout variable if using layout
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
CHANGING
it_outtab = gt_line[]
it_fieldcatalog = gt_fieldcat
IT_SORT =
IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4

Using ALV Grid for data Input

Hi experts.
Can someone assist me with information on using ALV grid for data input. Please give a simple example if possible.
I am mainly interested in the part in which we can transfer data from the grid changing the internal table's data.

Try this code:
REPORT z_demo_alv_jg.
TYPE-POOLS                                                          *
TYPE-POOLS: slis.
INTERNAL TABLES/WORK AREAS/VARIABLES                                *
DATA: i_fieldcat TYPE slis_t_fieldcat_alv,
      i_index TYPE STANDARD TABLE OF i WITH HEADER LINE,
      w_field TYPE slis_fieldcat_alv,
      p_table LIKE dd02l-tabname,
      dy_table TYPE REF TO data,
      dy_tab TYPE REF TO data,
      dy_line TYPE REF TO data.
FIELD-SYMBOLS                                                       *
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
               <dyn_wa> TYPE ANY,
               <dyn_field> TYPE ANY,
               <dyn_tab_temp> TYPE STANDARD TABLE.
SELECTION SCREEN                                                    *
PARAMETERS: tabname(30) TYPE c,
            lines(5) TYPE n.
START-OF-SELECTION                                                  *
START-OF-SELECTION.
Storing table name
p_table = tabname.
Create internal table dynamically with the stucture of table name
entered in the selection screen
CREATE DATA dy_table TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_table->* TO <dyn_table>.
IF sy-subrc <> 0.
    MESSAGE i000(z_zzz_ca_messages) WITH ' No table found'.
    LEAVE TO LIST-PROCESSING.
ENDIF.
Create workarea for the table
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
ASSIGN dy_line->* TO <dyn_wa>.
Create another temp. table
CREATE DATA dy_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_tab->* TO <dyn_tab_temp>.
SORT i_fieldcat BY col_pos.
Select data from table
SELECT * FROM (p_table)
INTO TABLE <dyn_table>
UP TO lines ROWS.
REFRESH <dyn_tab_temp>.
Display report
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program       = sy-repid
      i_structure_name         = p_table
      i_callback_user_command = 'USER_COMMAND'
      i_callback_pf_status_set = 'SET_PF_STATUS'
    TABLES
      t_outtab                 = <dyn_table>
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
IF sy-subrc <> 0.
ENDIF.
*&      Form SET_PF_STATUS
      Setting custom PF-Status
     -->RT_EXTAB   Excluding table
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'Z_STANDARD'.
ENDFORM.                    "SET_PF_STATUS
*&      Form user_command
      Handling custom function codes
     -->R_UCOMM      Function code value
     -->RS_SELFIELD Info. of cursor position in ALV
FORM user_command USING    r_ucomm LIKE sy-ucomm
                           rs_selfield TYPE slis_selfield.
Local data declaration
DATA: li_tab TYPE REF TO data,
        l_line TYPE REF TO data.
Local field-symbols
FIELD-SYMBOLS:<l_tab> TYPE table,
                <l_wa> TYPE ANY.
Create table
CREATE DATA li_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN li_tab->* TO <l_tab>.
Create workarea
CREATE DATA l_line LIKE LINE OF <l_tab>.
ASSIGN l_line->* TO <l_wa>.
CASE r_ucomm.
When a record is selected
    WHEN '&IC1'.
    Read the selected record
      READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX
      rs_selfield-tabindex.
      IF sy-subrc = 0.
      Store the record in an internal table
        APPEND <dyn_wa> TO <l_tab>.
      Fetch the field catalog info
        CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
          EXPORTING
            i_program_name         = 'Z_DEMO_PDF_JG'
            i_structure_name       = p_table
          CHANGING
            ct_fieldcat            = i_fieldcat
          EXCEPTIONS
            inconsistent_interface = 1
            program_error          = 2
            OTHERS                 = 3.
        IF sy-subrc = 0.
        Make all the fields input enabled except key fields*
          w_field-input = 'X'.
          MODIFY i_fieldcat FROM w_field TRANSPORTING input
          WHERE key IS INITIAL.
        ENDIF.
      Display the record for editing purpose
        CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
          EXPORTING
            i_callback_program    = sy-repid
            i_structure_name      = p_table
            it_fieldcat           = i_fieldcat
            i_screen_start_column = 10
            i_screen_start_line   = 15
            i_screen_end_column   = 200
            i_screen_end_line     = 20
          TABLES
            t_outtab              = <l_tab>
          EXCEPTIONS
            program_error         = 1
            OTHERS                = 2.
        IF sy-subrc = 0.
        Read the modified data
          READ TABLE <l_tab> INDEX 1 INTO <l_wa>.
        If the record is changed then track its index no.
        and populate it in an internal table for future
        action
          IF sy-subrc = 0 AND <dyn_wa> <> <l_wa>.
            <dyn_wa> = <l_wa>.
            i_index = rs_selfield-tabindex.
            APPEND i_index.
          ENDIF.
        ENDIF.
      ENDIF.
When save button is pressed
    WHEN 'SAVE'.
    Sort the index table
      SORT i_index.
    Delete all duplicate records
      DELETE ADJACENT DUPLICATES FROM i_index.
      LOOP AT i_index.
      Find out the changes in the internal table
      and populate these changes in another internal table
        READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX i_index.
        IF sy-subrc = 0.
          APPEND <dyn_wa> TO <dyn_tab_temp>.
        ENDIF.
      ENDLOOP.
    Lock the table
      CALL FUNCTION 'ENQUEUE_E_TABLE'
        EXPORTING
          mode_rstable   = 'E'
          tabname        = p_table
        EXCEPTIONS
          foreign_lock   = 1
          system_failure = 2
          OTHERS         = 3.
      IF sy-subrc = 0.
      Modify the database table with these changes
        MODIFY (p_table) FROM TABLE <dyn_tab_temp>.
        REFRESH <dyn_tab_temp>.
      Unlock the table
        CALL FUNCTION 'DEQUEUE_E_TABLE'
          EXPORTING
            mode_rstable = 'E'
            tabname      = p_table.
      ENDIF.
ENDCASE.
rs_selfield-refresh = 'X'.
ENDFORM.                    "user_command

Text data is not displaying at Report level for an Infoobject Item name

Hi All,
Texts data is maintained at Info object level but text information is not displaying at Report level for an object. I have set the property at query level as "Text", but at report level it is displaying key values of the object, not displaying texts information. This problem occured in QA(Quality) system but not replicated in Production system. I have checked all properties at backend and query level and compared the same between QA and Production system didn't find any difference.
Please suggest what might be the cause: at report level it is displaying key values instead of the textual information even text data is mainintained at backend. In production it is displaying textal data for the IO.
Thanks in advance.

Hi All,
Thanks for your valuable information. I have changed the setting under Advanced tab as "Master data" for Access type for results values, but didn't solved the problem still it showing key information for the IO.
In Production system the report displaying texts information for the IO, but in QA its displaying key information. The problem exits only in QA, its working fine in DEv and Production.
As per my understanding might be the issue with Patches will be checking with Basis team on the same.
Please suggest if you have any alternatives to fix the issue.

Devolped an ALV report for daily cash receipts for selected date range

hi,
             how to devlop an ALV report for daily cash receipts for selected date range.for this report what are the tables and fields we have to use.what is the selectionscreen&what is logic.give me sample report.

hi,
             how to devlop an ALV report for daily cash receipts for selected date range.for this report what are the tables and fields we have to use.what is the selectionscreen&what is logic.give me sample report.

Prepare ALV data for later display

Similar Messages

Maybe you are looking for