Preparing images for high quality DVD

I've been trying to create a photo slideshow from high quality images(Canon 20D) then burn them to DVD (both 4x3 and 16x9).
I can create the slideshow export to iDVD the burn with either iDVD or Toast.
My problem is the quality, it *****. Example if a street sign is in the image you can't read it. Its OK on the computer but impossible on a TV and its a HD TV.
Now I done it a few time with different setting always going for the best choices. I've also resized the images to 720(hor)x 534(vert) depending on the image orientation for 4x3 DVD.
If iPhoto/iDVD not the solution for the finest quality can you recommend what is?
Cheers
The Earl
G4 Quicksilver   Mac OS X (10.4.5)   Loaded

What video format is your source material? You simply cannot expect to get great quality without great quality source material.
Have a look here: http://discussions.apple.com/thread.jspa?messageID=7372382&#7372382
If you want to compress your video for web, have a look here: http://discussions.apple.com/message.jspa?messageID=7309534#7309534

Similar Messages

  • Low quality DVD outcome.. need help for high quality result ASAP!

    Hi every 1,
    (This is my first post, as I only got my iMac 2 weeks ago.. so please be gentle with me :P   )
    I have just been asked to turn a Microsoft powerpoint (PPT) into a DVD for "induction training video" purposes with voice overs and backing music. I have a professional music studio so providing high quality audio is fine, but trying to turn the power point into a high quality DVD file is my problem. This powerpoint has timing transitions (fade ins etc) for the timing of voice gaps. When using Microsoft PPT, you can turn the PPT into a Quicktime file which I was going to drop into iMoive then add the music and voiceovers.. this is when my problems started. Microsofts powerpoint doesn't add the transtiions and effect into render Quicktime movie, so I thought as my new iMac has iWork (KEYNOTE) I'd give it a try and to my surprise it all worked and the final mpeg4 quicktime movie result work great _when you look at it on the MAC_.
    1) Problem
    I then exported the file into iMovie and then my first Problem arose.... (grr). I movie lost it's sharpness and the images started to have pixelation.. that seemed to pulse in 1 seconds gaps.
    I hope this was just an issue with the iMovie preview window and thought once I put it into iDVD and burnt it... the final result may be fine.. but I was wrong and the quality was crap... with the pixelation still there.
    2) Problem
    The other problem that came up was the about 25% of the edge of the total screen was cutoff. When i did the original file, I choose 4:3 ratio, and watched it on this..so where did the image size go wrong.. I also choose the "high quality" Quicktime file, but didn't go into the settings in the iMovie in the export section (which I should off), but after check the compression type was H.264.. and I also didn't change any settings in the 'export file' section in KEYNOTE.. this is where I think I must have gone wrong..
    So in closing. my questions is:
    -What's the best way to turn a PPT into a _high quality file_ so it looks professional once it goes through iMovie and iDVD.. or
    - Should I just redo the whole production using iMovie ( by re doing all the work eg wording, transistion inside iMovie seems like a lot of extra word ) and so not use the PPT at all... and if I do this, then
    - What's sizes, and ratio and compressions should I use for 4:3 ratio TV purpose (eg. whats size should a background image be that I do inside Photoshop, so I can put the transition wording over the top, so I see it on the TV screen and the edge doesn't get cutoff etc.?
    I was very impressed with Keynote and would be happy to use this for most of the production.. but am I banging my head againist a wall...re fixing quality problems when exporting files into... can someone shed some light on this for me?
    Sorry this is such a big post.. but I thought if I gave you most of the background you would have to ask so many questions.
    Look forward to any help any 1 can provide..
    Michael
    Message was edited by: sycosingo

    Matti,
    Thx so much for your help.. it's really appreciated. This is by far the best result quality wise, (but I really am a perfectionist and personally are still not overall happy with the final product) but if my client is happy.. then I will continue down this track for this job.
    ie Create TIFF;'s>Quicktime PRO>iMovie (transistions)>iDvd
    You've been a great help and I hope it good enough for the client.
    I find the images and wording lose their sharpness only after being imported into iMoive. I could still be probably enhance the quality level of the TIFF's once more, as I did the test slides in Keynote, then exported the 5 slides a individual as TIFFS out of Keynote, then imported the into QuickTime Pro as you suggested then followed your instructions all the way to the final burning of the CD. I also tried doing this in Photoshop using your suggestion of 720x576 images (for PAL) .. pixel aspect ratio to ~1.094 so you can see the correct proportions for 4:3 video output. When creating the new slide in Photoshop there were a few extra settings other than the ones you gave me... _so I would real appreciate what every setting should be when creating the NEW TIFF file in Photoshop for PAL 4:3._ I noticed when I did this the image crispness on the fonts was shithouse pixelated and shadows, even while looking at it from inside Photoshop )
    As I tried mutliple ways of importing into iMovie (yours being the best suggestion) I really believe when dragging a TIFF or movie turns to blur on the way into iMoive. You can see the image is blurred from that point on.... _do I need to buy final cut pro or express to get a better image quality result?_
    I also tried iMoive7, which I found was great to use video editing wise, but Apples has definitely stuffed up there by not give users a 'time line' to work with in the Audio section... but everything else in the video area was great to use.., but in my situation trying to line up the narration to slide, while having also background music is now impossible sadly.
    Also I really like the 3D transitions in KEYNOTE, plus iMovie 7.. do you know if there are available for HD6 or if there's a 3rd party company that has smilar versions
    Thx again,
    sycosingo
    Message was edited by: sycosingo

  • What's the proper workflow to combine multiple video types and turn them into one high quality DVD?

    I'm trying to combine 1080i (29.97fps), 1080p (29.97fps), and 720p (24fps) video files into a single Premiere Pro project, and end up with a high quality DVD.
    There are a few problems I can't solve:
    1. There seems to be interlacing and clarity issues any time I export it to DVD dimensions (720x480), and on some TVs I'll get a bouncing motion on the 720p footage (slideshow). Yet everything seems to look perfect when I export it something like an HD MOV file.
    2. If I use Final Cut X to make the DVD, I'll get audio popping and decent image quality. Yet if I use Encore, I'll get horrible interlacing, but good audio.
    I don't have any training in video workflow let alone how to properly diagnose and solve problems that arise. So I need someone to lay out the proper workflow and settings from start to finish to get these three different types of footage to look great on a DVD using Premiere/Encore.
    I've attached sample images showing the types of footage I'm using and the kind of problems I'm running into for reference.

    By far the best way to get the quality of encoding is to use Compressor and not DVDSP. You can set Compressor up to do the AC3 (which DVDSP can't do). Alternatively, use a better encoder than Compressor, such as BitVice or MegaPEG.X... but remember that these do not do AC3 encoding.
    Keep the encoded assets all in a single folder on your mac, then drag that folder into the DVDSP 'Assets' tab. This will import them all and keep them in the folder, which is a neater way of doing things. Select all of the clips within the folder (or simply select the folder itself) and drag them on to the track - they will go on in alphabetic or numeric order (whichever you have used as your names). If using numbers, remember to use '01', '02', etc otherwise clip ten, eleven, twelve and so on will follow clip one... clip two will come after clip 19.
    Drop them all on a single track. You can then point a menu button at the track and all of the clips will play one after the other. If you want black in between then you will be better adding this in a NLE such as Final Cut, then exporting the entire sequence of clips as a single file. Alternatively, create a black .pict file the correct dimensions for the video format you are using and manually add it in between each clip on the timeline. Or, create a series of black .pict files and name them 011, 021, 031 and so on. Place them in your folder of clips with the MPEGs named 01, 02 and so on. When you select all and drop it onto your timeline within DVDSP a black clip will go in between each piece of footage (sequence will be 01, 011, 02, 021, 03, 031 ). This is probably the quickest way to do it. You can reuse the same black .pict files for every project like this and as long as you follow the same naming convention it will always work.
    Like anything you want to automate, the first couple of times take longer to set up. After that it is a lot easier.

  • How to make high-quality DVD

    I want to make high-quality DVD(Blu-ray Format) with premiere.
    But, when I used Ecore and select Blu-ray to exported the image disk.
    (want burning the DVD from toaster).The DVD was video only.(The menu has not been played).
    If changed to DVD to exported the image disk, it was ok, the menu has been played.
    Did I lost step or wrong way?
    thank you
    li

    Effectively, I post this because I hope help other one to solve this issue.
    So at first I didn't not very clearly understand about it.
    The issue point is hope export AVCHD disk form Premiere/Encore.
    (Premiere Element can export AVCHD file).
    Now, I thought the Premiere/Encore can't export AVCHD disk.
    The menu describe form in the other one, I think is not  issue point and maybe operate mistake.
    thank you!

  • Rectangular Pixel Setting: Where? (also tips for higher quality?)

    The bottom line: Where can I find the setting -- in Final Cut, in Compressor, or in DVD Studio Pro -- to use rectangular instead of square pixels on export (or burn or wherever)?
    The story: I'm trying to burn a DVD for a friend of our kids' jazz concert.  It looks great on computer.  Once in DVD Studio Pro's simulate function, though, all the the performers look slightly stretched.  They look that way on TV, too.  My understanding is that this is due to the difference in computer and TV pixel shapes and that there is a setting somewhere to address it.
    These are my settings in Compressor. If that helps.  And, if anyone can recommend settings for higher quality (I'm getting some stepping which looks lousy on big TVs), I would love to hear them
    Name: MPEG-2 7.5 Mbps 2-pass
    Description:
    File Extension: m2v
    Estimated size: 2.88 GB/hour of source
    Type: MPEG-2 video elementary stream
        Usage:SD DVD
    Video Encoder
        Format: M2V
        Width and Height: Automatic
        Pixel aspect ratio: Default
        Crop: None
        Padding: None
        Frame rate: (100% of source)
        Frame Controls: Automatically selected: Off
        Start timecode from source
        Aspect ratio: Automatic
            Selected 16:9
        Field dominance: Automatic
        Average bit rate: 6.4 (Mbps)
        2 Pass VBR enabled
            Maximum bit rate: 7.5 (Mbps)
        High quality
        Best motion estimation
        Closed GOP Size: 1/2 second, Structure: IBBP
        DVD Studio Pro meta-data enabled

    Found it!
    It's in DVD Studio Pro, on the Settings drop down found in the upper right corner of the Viewer window

  • Can I export a high quality DVD from iMovie?

    Please help.  I am making a short experimental film which will show in a gallery in a few weeks.  I need the final product to be as high quality as possible.  It will be projected on a big screen before an audience.  Can I make a high quality DVD from iMovie?  I have iMovie 08 and would like to upgrade it to iMovie 11 to get the most features.  But I don't want to do a lot of work then find out I can't exhibit the final project properly.  I have been reading about iMovie for days on this forum, but I can't get a handle on exactly what is the difference between all the versions.  What do you suggest?

    I should mention that my movie is made up entirely of still photos with lots of transitions, jump cuts, etc.  I don't know if that makes a difference.

  • What is the best video converter for high quality MPEG-4 for Apple TV?

    What is the best video converter for high quality MPEG-4 for Apple TV?

    Handbrake won't convert AVI files, But there are many more than those mentioned that will
    The choice of conversion software is a personal choice, I have around a dozen applications that will tackle AVI's, however VisualHub is not one of them, not because there is anything wrong with it but rather I have enough such applications in my arsenal already.
    I would use mpegstreamclip in most scenarios for what you are wanting to do but maybe not always. It is a good idea to have a few applications to choose from as not all do the same thing. mpegstreamclip has a few more options than some bog standard applications without becoming overburdening with choices.
    You might want to try a few applications yourself before deciding on the software for you. isquint is a free limited version of visualhub, you might want to give that a whirl to get a feeling for visualhub.
    Be aware though that quality conversions do not happen quickly, claims of being faster than other applications may well be correct, but are usually a trade off against quality. Again you need to choose your software to reflect your preferred balance between speed and quality.
    Here's how I use mpegstreamclip, http://web.me.com/gartside1104/z008/Mpegstreamclip.html but your AVI's may well be low quality, you shouldn't set the bitrate any higher than your source file and likely lower, you shouldn't increase the frame size either.
    Message was edited by: Winston Churchill

  • Best for high-quality mic wo

    Any suggestions please as to the best board to use for high-quality mic (speech) recordings?
    Thanks
    Richard/UK

    Thanks Steve,
    I'm only intending to show it on computer/projector so I think I'll check out ProShow Gold or Producer.
    Also, I'm planning on doing zooms and pans.  Is 1000x750 pixels still the optimal Premiere import size if I'll be zooming?

  • Best settings for a high quality dvd from FCP reference file?

    Can anyone give me a list of steps to make the best possible quality DVD from an FCP reference file? The film is 10 minutes long, NTSC. Or can someone direct me to some threads that address this issue? Thanks so much.

    This may be of assistance:
    http://www.kenstone.net/fcphomepage/bitbudget.html

  • Help with getting high quality DVDs from AVCHD footage

    Hello,
    I know enough about video editing with PE7 to be dangerous, and was hoping someone could help me out.
    My question is regarding getting the highest quality standard DVD from AVCHD footage. I have a Sony HDR-SR12 camcorder recording in AVCHD. I am editing footage natively in AVCHD with PE7 on a quad core system. No problem with that. However, when I export to standard DVD the quality of the video goes down drastically. (Yes, I know burning to Blu-ray would give me higher quality, but I am giving this DVD to a friend who doesn't have Blu-ray).
    So far I have tried starting my project in both HD 1080i 30 5.1 channel:
    General
    Editing mode: HDV 1080i
    Timebase: 29.97 fps
    Video Settings
    Frame size: 1440h 1080v (1.333)
    Frame rate: 29.97 frames/second
    Pixel Aspect Ratio: HD Anamorphic 1080 (1.333)
    and Full HD 1080i 30 5.1 channel:
    General
    Editing mode: HD 1080i
    Timebase: 29.97 fps
    Video Settings
    Frame size: 1920h 1080v (1.000)
    Frame rate: 29.97 frames/second
    Pixel Aspect Ratio: Square Pixels (1.0)
    But I see no discernable difference in the quality of my output onto DVD.
    This is where my knowledge is lacking...how can I get the best quality output from my AVCHD onto a standard DVD? Is there some format I can convert to first, and then burn to DVD? Also, I am willing to break the footage into a couple of DVDs to improve the quality, but I don't know how or what to do for that.
    My footage looks REALLY great when viewing from the HDR-SR12 direct to HD TV with HDMI cable, but not very good on the DVD. My footage is of a ballet recital, and I lose definition in the faces, costumes, etc on the DVD output.
    Any help is appreciated! Thanks!
    Gina

    Hey Gina,
    This may be a year late, but as I have been pulling my hair out trying to solve this problem for the last 48 hours I finally did find somewhat of a work around, but it requires Adobe PP CS4.2.
    There is a plug-in here:
    http://www.mainconcept.com/site/prosumer-products-4/mpeg-pro-hd-7850/features-7861.html
    Which will actually output your edit as an AVCHD file. You can then burn this straight to an AVCHD using Nero 9 and keep the highquality level of your clips and not need Blu-Ray. The DVD player will need to be AVCHD capable, but I just bought one of those for $40 as compared to the $200+ of most Blu-Ray players.
    Hope that helps.
    Regards,
    DSW

  • What settings do I need for high quality web video?

    I've created a video via animoto.com for my website. The video resolution they recommend for web is 432 x 240 @ 15 fps. I used this and it's not as crystal clear as I'd like. Still looks pixelated a bit and I'd like a higher def version. So I downloaded the hi res version (864 x 480 @ 24 fps). This looks great but takes forever to load due to buffering. Then the video stops every few seconds. I understand this res is not meant for web.
    What is the resolution I need for best quality & fast loading? I've seen great videos on the web before that loaded very quickly. This is what I'm looking for. I have Quicktime Pro for Mac and can pretty much save in any formats & resolutions. So what's recommended?
    Thanks!

    Hi
    There are some important things.
    • Set down burn speed to x1. In iDVD08 You can do this in preferences.
    • Use high quality media. I only use Verbatim
    • Use right type of DVDs. I only use DVD-R (Single Layer)
    • Best quality - I use Pro-encoding Quality.
    • IMPORTANT: Secure a minimum of 25Gb free space on Your internal (start-up) hard disk
    • Use a CD/DVD cleaning disk from time to time
    • Don't burn more than three DVD at a time then let Your DVD-burner rest in 15 minutes to cool down.
    Good Luck
    Yours Bengt W

  • Looking for high-quality videoconferencing to PC in Italy

    I've been using Skype to do piano lessons with my teacher in Italy & between me and my son we are videoconferencing nearly 4hrs/wk with her. I have a wireless broadband connection (with ethernet hard-wire to router from my machine). She has a PC laptop & ADSL connection. Problems are increasing with very bad connections. It was noticeably worse after upgrading my OS in November, but I don't know why. We get unbearable static after a few seconds in audio, and frame rate degrades from about 15fps at the start to 4 or 5fps after half a minute or so with latency of more than half a second. The image breaks up frequently, and we often lose the connection entirely. We end up shutting down the audio and calling her on the landline phone for audio. I've tried various solutions, but am really looking for a much higher quality application, and am willing to pay up to $50/mo. We do not need multi-user capability, just the one connection.
    Has anyone had personal experience with other applications? iVisit doesn't look much better, but I haven't tried it & their website doesn't compare it to Skype.

    Hello cynjon
    Before you change software, you might want to try to determine whether the problem is with your teacher's system or ISP. Although I do not frequent the Skype Fora and have not checked there, as noted in this iChat AV 3 thread, iChat users have reported difficulty with Italian contacts who use the Italian "FastNet" ISP: http://discussions.apple.com/thread.jspa?messageID=6237921&#6237921
    It might also be helpful to know whether your Italian teacher encounters problems similar to the one with you when he video chats with others. If possible, both you and teacher should try Skype video with other international contacts to try to determine whether one system has more trouble than the other. If one system is not working properly, switching to another video chat app may not help your video connection.
    If you would like to try some other apps, several cross-platform video conference / chat apps of widely varying cost and capability are listed in Some Applications You Can Use With iSight. Use the links to each app that is of interest to you for info about its features, terms, and instructions.
    You might also want to try using your browser with a web-based video chat-room like MeBeam to see if it might work for you. (Click here for Info / Help.)
    If someone here has already found a reliable video connection to Italy, I am sure they will suggest it.
    EZ Jim
    PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.1)  External iSight

  • Settings for best quality DVD

    Hi,
    I'm hoping someone can help me to get the best quality DVD for home movies.
    I have been editing and putting the movies to DVD for a number of years and the quality has been excellent. but over the last year something has changed and the quality of the final DVD is quite poor (pixalated)
    I have tested different settings in both imovie HD and idvd but it hasn't made any difference so far.
    I am using the following:
    Sony HDR-HC9 handycam (Recording in HDV1080i)
    imovie HD 6.0.3
    iDVD 7.1
    Thanks for any insight you can give me!

    Hi
    As written - dust on lens - first thought
    If You made a lot of DVDs in a row (>3 at a time) then there is a risk to burn out/harm the laser.
    my list on DVD Quality - read or keep. It's long !
    *DVD quality*
    1. iDVD 08 & 09 has three levels of qualities.
    iDVD 6 has the two last ones
    • Professional Quality *(movies + menus up to 120 min.)* - BEST
    • Best Performances *(movies + menus less than 60 min.)* - High quality on final DVD
    • High Quality (in iDVD08 or 09) / Best Quality (in iDVD6) *(movies + menus up to 120 min.)* - slightly lower quality than above
    2.Video from
    • FCE/P - Export out as full quality QuickTime.mov (not selfcontaining, no conversion)
    • iMovie x-6 - Don't use ”Share/Export to iDVD” = destructive even to movie project and especially so
    when the movie includes photos. Instead just drop or import the iMovie movie project icon (with a Star on it) into iDVD theme window.
    • iMovie’08 not meant to go to iDVD. Go via Media Browser or rather use iMovie HD 6 from start.
    3. I use Roxio Toast™ to make an as slow burn as possibly eg x1 (in iDVD’08 or 09 this can also be set)
    This can also be done with Apple’s Disk Utilities application.
    4. There has to be about or more than 25Gb free space on internal (start-up) hard disk. iDVD can't
    use an external one as scratch disk (if it is not start-up disc).
    5. I use Verbatim ( also recommended by many - Taiyo Yuden DVDs - I can’t get hold of it to test )
    6. I use DVD-R (no +R or +/-RW)
    7. Keep NTSC to NTSC - or - PAL to PAL when going from iMovie to iDVD
    8. Don’t burn more than three DVD at a time - but let the laser cool off for a while befor next batch.
    iDVD quality also depends on.
    • DVD is a standard in it self. It is Standard Definition Quality = Same as on old CRT-TV sets and can not
    deliver anything better that this.
    HD-DVD was a shortlived standard and it was only a few Toshiba DVD-players that could playback.
    These DVDs could be made in DVD-Studio Pro. But they don’t playback on any other standard DVD-layer.
    *Blu-Ray / BD* can be coded onto DVDs but limited in time to - about 20-30 minutes and then need
    _ Roxio Toast™ 10 Pro incl BD-component
    _ BD disks and burner if full length movies are to be stored
    _ BD-Player or PlayStation3 - to be able to plyback
    The BD-encoded DVDs can be playbacked IF Mac also have Roxio DVD-player tool. Not on any standard Mac or DVD-player
    Full BD-disks needs a BD-player (in Mac) as they need blue-laser to be read. No red-laser can do this.
    • HOW much free space is there on Your internal (start-up) hard disk. Go for approx 25Gb.
    less than 5Gb and Your result will most probably not play.
    • How it was recorded - Tripod vs Handheld Camera. A stable picture will give a much higher quality
    • Audio is most often more critical than picture. Bad audio and with dropouts usually results in a non-viewed movie.
    • Use of Video-editor. iMovie’08 or 09 or 11 are not the tools for DVD-production. They discard every second line resulting in a close to VHS-tape quality.
    iMovie 1 to HD6 and FinalCut any version delivers same quality as Camera recorde in = 100% to iDVD
    • What kind of movie project You drop into it. MPEG4 seems to be a bad choice.
    other strange formats are .avi, .wmv, .flash etc. Convert to streamingDV first
    Also audio formats matters. I use only .aiff or from miniDV tape Camera 16-bit
    strange formats often problematic are .avi, .wmv, audio from iTunes, .mp3 etc
    Convert to .aiff first and use this in movie project
    • What kind of standard - NTSC movie and NTSC DVD or PAL to PAL - no mix.
    (If You need to change to do a NTSC DVD from PAL material let JESDeinterlacer3.2.2 do the conversion)
    (Dropping a PAL movie into a NTSC iDVD project
    (US) NTSC DVDs most often are playable in EU
    (EU) PAL DVDs most often needs to be converted to play in US
    UNLESS. They are plabacked by a Mac - then You need not to care
    • What kind of DVDs You are using. I use Verbatim DVD-R (this brand AND no +R or +/-RW)
    • How You encode and burn it. Two settings prior iDVD’08 or 09
    Pro Quality (only in iDVD 08 & 09)
    Best / High Quality (not always - most often not)
    Best / High Performances (most often my choise before Pro Quality)
    1. go to iDVD pref. menu and select tab far right and set burn speed to x1 (less errors = plays better) - only in iDVD 08 & 09
    (x4 by some and may be even better)
    2. Project info. Select Professional Encoding - only in iDVD 08 & 09.
    Region codes.
    iDVD - only burn Region = 0 - meaning - DVDs are playable everywhere
    DVD Studio pro can set Region codes.
    1 = US
    2 = EU
    *unclemano wrote*
    What it turned out to be was the "quality" settings in iDVD. The total clip time was NOT over 2 hours or 4.7GB, yet iDVD created massive visual artifacts on the "professional quality" setting.
    I switched the settings to "high quality" which solved the problem. According iDVD help, "high quality" determines the best bit rate for the clips you have.
    I have NEVER seen iDVD do this before, especially when I was under the 2 hour and 4.7GB limits.
    For anyone else, there seem to be 2 places in iDVD to set quality settings, the first is under "preferences" and the second under "project info." They do NOT seem to be linked (i.e. if you change one, the other is NOT changed). take care, Mario
    TO GET IT TO WORK SLIGHTLY FASTER
    • Minimum of 25Gb free space on Start-Up hard disk
    • No other programs running in BackGround eg EnergySaver
    • Don’t let HD spinn down or be turned off (in EnergySave)
    • Move hard disks that are not to be used to Trash - To be disconnected/turned off
    • Goto Spotlight and set the rest of them under Integrity (not to be scanned)
    • Set screensaver to a folder without any photo - then make an active corner (up right for me) and set
    pointer to this - turns on screen saver - to show that it has nothing to show
    Yours Bengt W

  • What is the best format to publish/export in for high quality??

    Hii everyone
    I designed a brochure in illustrator and every time I publish it for some reason quality is lost.. the image isn't so sharp and clear anymore. Can anyone help??

    no name,
    To elaborate, File>Save As PDF, or File>Print choosing PDF/Acrobat Distiller as printer, will normally be the safest way to get everything to print in the right way regardless of final printer. You may set the options for desired quality/compatibility level (high is mostly good). If you have raster images, you may File>Place them as links.
    If relevant for the artwork, and if you are only/mainly printing with a non Postscript printer, you may consider using File>Document Color Mode>RGB Color from the start to avoid repeated colour conversions, still staying within the CMYK gamut if the printer only prints CMYK (you can see the Out Of Gamut warning in the Color palette/panel).
    Edit: Crossposting.
    For Worst, you will probably need something like a File>Export using JPEG, TIFF, Bitmap, or PNG, using RGB Color Mode and setting the resolution high enough.

  • How to remake image in high quality?

    Hi guys, i really need some help, i need this extremely low quality image remade so its high quality. Doesn't have to be EXACTLY the same but pretty close
    a transparent background (so a PDF) would be so amazing!
    Any help would be greatly appreciated!!
    Thanks in advance!!!!

    This will need an expert hand trace, they may be able to help. How It Works- Vector Magic
    Gene

Maybe you are looking for