Can I export a high quality DVD from iMovie?

Please help.  I am making a short experimental film which will show in a gallery in a few weeks.  I need the final product to be as high quality as possible.  It will be projected on a big screen before an audience.  Can I make a high quality DVD from iMovie?  I have iMovie 08 and would like to upgrade it to iMovie 11 to get the most features.  But I don't want to do a lot of work then find out I can't exhibit the final project properly.  I have been reading about iMovie for days on this forum, but I can't get a handle on exactly what is the difference between all the versions.  What do you suggest?

I should mention that my movie is made up entirely of still photos with lots of transitions, jump cuts, etc.  I don't know if that makes a difference.

Similar Messages

  • Help with getting high quality DVDs from AVCHD footage

    Hello,
    I know enough about video editing with PE7 to be dangerous, and was hoping someone could help me out.
    My question is regarding getting the highest quality standard DVD from AVCHD footage. I have a Sony HDR-SR12 camcorder recording in AVCHD. I am editing footage natively in AVCHD with PE7 on a quad core system. No problem with that. However, when I export to standard DVD the quality of the video goes down drastically. (Yes, I know burning to Blu-ray would give me higher quality, but I am giving this DVD to a friend who doesn't have Blu-ray).
    So far I have tried starting my project in both HD 1080i 30 5.1 channel:
    General
    Editing mode: HDV 1080i
    Timebase: 29.97 fps
    Video Settings
    Frame size: 1440h 1080v (1.333)
    Frame rate: 29.97 frames/second
    Pixel Aspect Ratio: HD Anamorphic 1080 (1.333)
    and Full HD 1080i 30 5.1 channel:
    General
    Editing mode: HD 1080i
    Timebase: 29.97 fps
    Video Settings
    Frame size: 1920h 1080v (1.000)
    Frame rate: 29.97 frames/second
    Pixel Aspect Ratio: Square Pixels (1.0)
    But I see no discernable difference in the quality of my output onto DVD.
    This is where my knowledge is lacking...how can I get the best quality output from my AVCHD onto a standard DVD? Is there some format I can convert to first, and then burn to DVD? Also, I am willing to break the footage into a couple of DVDs to improve the quality, but I don't know how or what to do for that.
    My footage looks REALLY great when viewing from the HDR-SR12 direct to HD TV with HDMI cable, but not very good on the DVD. My footage is of a ballet recital, and I lose definition in the faces, costumes, etc on the DVD output.
    Any help is appreciated! Thanks!
    Gina

    Hey Gina,
    This may be a year late, but as I have been pulling my hair out trying to solve this problem for the last 48 hours I finally did find somewhat of a work around, but it requires Adobe PP CS4.2.
    There is a plug-in here:
    http://www.mainconcept.com/site/prosumer-products-4/mpeg-pro-hd-7850/features-7861.html
    Which will actually output your edit as an AVCHD file. You can then burn this straight to an AVCHD using Nero 9 and keep the highquality level of your clips and not need Blu-Ray. The DVD player will need to be AVCHD capable, but I just bought one of those for $40 as compared to the $200+ of most Blu-Ray players.
    Hope that helps.
    Regards,
    DSW

  • Best settings for a high quality dvd from FCP reference file?

    Can anyone give me a list of steps to make the best possible quality DVD from an FCP reference file? The film is 10 minutes long, NTSC. Or can someone direct me to some threads that address this issue? Thanks so much.

    This may be of assistance:
    http://www.kenstone.net/fcphomepage/bitbudget.html

  • HT4078 How do I burn a high quality dvd from iDVD?

    I made a slideshow in iDVD using hi-res photos, but when I burned my dvd, it was really low quality. How do I fix this?

    Additionally, if you want high quality slide shows, you might want to consider using a third party app called Photo to Movie. I find their options (including HD quality) and zooms (Ken Burns effect) far superior to the lack of quality of the Ken Burns effect in iPhoto, iMovie, and iDVD. My workflow is that I create the slideshow in Photo to Movie, export it at the highest expert settings, then either import it into iMovie to incorporate it into a project or simply add it to iDVD as a movie along with the others.
    http://www.lqgraphics.com/software/phototomovie.php

  • How can I achieve a good quality DVD from HDV?

    What is the best path to take my HDV 1080-60i FCP sequence and create a standard definition letterbox DVD in DVD Studio Pro? Thus far, I've gotten motion artifacts whenever there is movement in the video. Surely there is a way to edit HDV and create a decent quality DVD. Is there?
    Thank you!

    http://www3.telus.net/bonsai/Step-by-Step.html
    Start with this, then search again on this forum.
    GOOD LUCK
    Z1

  • Burn Highest Quality DVD from iMovie '11 where source is from DV tapes?

    Hello everyone -- I'm hoping to find an answer that isn't too wildly technical and doesn't discuss the HD aspect of things.
    I recently used the Share --> iDVD method and the results were pretty bad. It looked unsaturated, bland, pale, and blah. But any clips with increased contrast or saturation (changed within the editing process) looked jaggy and pixelly. In one clip, I lowered the exposure and brightness of rippling waves in water so they were very dark. It looked great within iMovie, looked like pixellated psychedelic nausea-inducing goofiness after I exported it, and truly appalling on the DVD.
    The source video isn't brilliant, but when I make a Quicktime movie of it (using Share --> Export Using Quicktime, i think default settings) it looks OK. (except for those waves.)
    I'm using an iMac running 10.8.1, Snow Leopard, and iMovie '11. iDVD is 7.1.2
    I also have Roxio Toast 10 Titanium.
    Also, I used whatever the default settings are to capture the source video from a now-old Canon DV camera. Was that a mistake -- are there special settings I should dig up?
    Thanks so much for any help you can offer.
      Model Name:          iMac
      Model Identifier:          iMac9,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.66 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          6 MB
      Memory:          8 GB

    Technically, it is a different process.
    When you use SHARE/EXPORT MOVIE or SHARE/MEDIA BROWSER, iMovie creates you finished movie in H.264. When you use SHARE to IDVD, iMovie creates an intermediate movie for use only in iDVD that is in DV codec (or AIC codec if the original footage was HD).
    Intuitively, it would seem that staying in DV would give better results, but my experience has been the opposite.
    Here is a quick and dirty video showing the use of the Media Browser in iDVD. I guess you could call it a pane.

  • How can I export a compressed mp4 file from iMovie (mavericks)?

    Hello everyone,
    I had just downloaded the new version of iMovie.
    I'm very amazed to see that the funcion "Export movie with QuickTime" is not available.
    I used this funcion to customize parameters of exported videos;
    How can now customize parameters? I have to use another external software to produce mp4 files???
    Thankyou for answers.
    Gianmarco

    If you use "Share" and choose 540P, 720P or 1080P it will be mp4, withH264 codec.  You just have to once figure out what spefic settings (for example bitrates) are used with the defaults from iMovie 13 (look-up the exported files with info in Quicktime), and wether they are ok with you.
    In the former version I already used automator to achieve some specfic settings for my web-video's, now I think I don't need that anymore.
    The only way around as far as I know is the usage of QTPro7 or compressor. Export as 1080P and open the file with one of those apps.
    HtH
    Ben

  • How do I create high quality stills from iMovie?

    I know how to use the Create Still feature in order to create a photo in iMovie, however the resulting jpeg appeared too grainy when imported into Photoshop. It seems that the jpeg that iMove creates is too small (in terms of kb) to be of any use. Is there a way for iMovie to create larger, higher quality still photos? Or is there another way to go about this? Thanks

    rolesh79 wrote:
    .... It seems that the jpeg that iMove creates is too small (in terms of kb) to be of any use. Is there a way for iMovie to create larger, higher quality still photos?
    No.
    video is highly compressed, much higher than any still or graphics.
    e.g. a 'FullHD'-cam fits 108.000 'stills' (=1h video) of 1920x1080 pixel into 4-8GB ... make the math your own

  • How can I Burn the Best Quality DVD from a project in i-movie 06' HD?

    Hello I shot a sort film with a Cannon HV-30 HD camera, edited it in i-movie 06 HD, it looks amazing! However I am a bit confused on what setting to burn it at in I-DVD...Best Quality or Best Performance? I herd it will not burn in HD so what is the next best? The short film is about 14 minutes long. Any advice would be appreciated!
    Thanks
    Steven

    "Best quality" of course.  ;-)
    "Best performance" is just a faster burning/encoding process. The playback quality is a little lower than "Best quality". Since you burn once and play many times, go for "Best quality".

  • How can I export a video with audio from premiere cs 5.5 to a DVD

    how can I export a video with audio from premiere cs 5.5 to a DVD

    You don't... at least not directly... you export MPEG2-DVD and then use the TWO files (audio and video) in Encore
    CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 may help

  • What's the proper workflow to combine multiple video types and turn them into one high quality DVD?

    I'm trying to combine 1080i (29.97fps), 1080p (29.97fps), and 720p (24fps) video files into a single Premiere Pro project, and end up with a high quality DVD.
    There are a few problems I can't solve:
    1. There seems to be interlacing and clarity issues any time I export it to DVD dimensions (720x480), and on some TVs I'll get a bouncing motion on the 720p footage (slideshow). Yet everything seems to look perfect when I export it something like an HD MOV file.
    2. If I use Final Cut X to make the DVD, I'll get audio popping and decent image quality. Yet if I use Encore, I'll get horrible interlacing, but good audio.
    I don't have any training in video workflow let alone how to properly diagnose and solve problems that arise. So I need someone to lay out the proper workflow and settings from start to finish to get these three different types of footage to look great on a DVD using Premiere/Encore.
    I've attached sample images showing the types of footage I'm using and the kind of problems I'm running into for reference.

    By far the best way to get the quality of encoding is to use Compressor and not DVDSP. You can set Compressor up to do the AC3 (which DVDSP can't do). Alternatively, use a better encoder than Compressor, such as BitVice or MegaPEG.X... but remember that these do not do AC3 encoding.
    Keep the encoded assets all in a single folder on your mac, then drag that folder into the DVDSP 'Assets' tab. This will import them all and keep them in the folder, which is a neater way of doing things. Select all of the clips within the folder (or simply select the folder itself) and drag them on to the track - they will go on in alphabetic or numeric order (whichever you have used as your names). If using numbers, remember to use '01', '02', etc otherwise clip ten, eleven, twelve and so on will follow clip one... clip two will come after clip 19.
    Drop them all on a single track. You can then point a menu button at the track and all of the clips will play one after the other. If you want black in between then you will be better adding this in a NLE such as Final Cut, then exporting the entire sequence of clips as a single file. Alternatively, create a black .pict file the correct dimensions for the video format you are using and manually add it in between each clip on the timeline. Or, create a series of black .pict files and name them 011, 021, 031 and so on. Place them in your folder of clips with the MPEGs named 01, 02 and so on. When you select all and drop it onto your timeline within DVDSP a black clip will go in between each piece of footage (sequence will be 01, 011, 02, 021, 03, 031 ). This is probably the quickest way to do it. You can reuse the same black .pict files for every project like this and as long as you follow the same naming convention it will always work.
    Like anything you want to automate, the first couple of times take longer to set up. After that it is a lot easier.

  • How to make high-quality DVD

    I want to make high-quality DVD(Blu-ray Format) with premiere.
    But, when I used Ecore and select Blu-ray to exported the image disk.
    (want burning the DVD from toaster).The DVD was video only.(The menu has not been played).
    If changed to DVD to exported the image disk, it was ok, the menu has been played.
    Did I lost step or wrong way?
    thank you
    li

    Effectively, I post this because I hope help other one to solve this issue.
    So at first I didn't not very clearly understand about it.
    The issue point is hope export AVCHD disk form Premiere/Encore.
    (Premiere Element can export AVCHD file).
    Now, I thought the Premiere/Encore can't export AVCHD disk.
    The menu describe form in the other one, I think is not  issue point and maybe operate mistake.
    thank you!

  • Making the best quality DVD from FCP

    Can anyone suggest how to make the highest quality DVD from an HDV FCP project?

    It's a fun website that I've seen people use recently : http://lmgtfy.com/
    It basically generates a url that you can post onto forums etc, and when you click on it, it takes you to the 'mock' google page, followed by the results. It's a polite but fun way of saying "Don't be so lazy, and do a search!". No offense intended to the OP.
    The Bruce image is one i had uploaded to Tinypic.com ages ago.
    Glad you like it!

  • Low-quality DVD from SD files

    I'm new to Premiere Pro CS5, and I'm having difficulty creating a good-quality DVD from my SD footage. It may be because my video is too long (2 hr. 14 min.), but I thought maybe I was doing something wrong.
    I've done similar things (DVDs from plays I've recorded, with the same camera) using different software, and the final quality was better. However, for various reasons, the old software isn't working well any more and I'm making the switch to PP.
    I've included some technical details below. Any ideas would be greatly appreciated.
    Thanks,
    Jon
    Original footage:
    Shot on Panasonic DVX 100B, SD: 720x480 (0.9091), 23.976 fps (24p)
    Captured as .avi files using Premiere Pro
    Edited in Premiere Pro CS5 64bit (ver.5.0.3)
    Total video length: 2h:14m
    Sample of .avi footage, original size:
    400% magnification:
    Dynamic linked to Encore (ver.5.0.0.5)
    Added 2 menu screens with a small jpg on each
    1st try: Transcoded using Automatic settings
    (DVD Transcode in Properties dialog). Quality was awful -- faces very blotchy.
    2nd try: Changed DVD Transcode to:
    NTSC DV 23.976 Hi-Qual 7Mb VBR 2 pass
    Quality didn't improve.
    3rd try: Specified a 2-sided DVD to give it more room. (I don't  have a 2-sided DVD, but I thought I could burn it onto 2 DVDs). The  transcoded file size increased (6.89GB m2v file), but the quality didn't  really improve.
    Sample of m2v footage, original size:
    400% magnification:
    It's a 3-act play, and my next thought was to try to do Act 1 as one file, on one DVD, and Acts 2 & 3 (shorter) as a separate project on a 2nd DVD. Blu-Ray isn't an option, unfortunately.
    Thanks!

    Jeff,
    As I just posted, it turns out that Dan's instructions about HC Encoder were the ones that basically got me what I needed. However, I really appreciate your suggestions, and I wanted to post my test results and procedure, in case it's helpful to anyone (or if I need it again).
    Regarding your test scenarios, I started on two different sequences: one set up as DV 24P, and the other as DV NTSC. My detailed notes are below -- too much to read, unless you're interested how it all turned out.
    Thanks again,
    Jon
    Test 1: Playing in the Premiere Program Window
    A. On DV 24P sequence:
       1. Leave Interpret Footage parameters at current settings. Quality OK
       2. Change just the "Remove 24p DV Pulldown" setting. Quality Terrible
       3. Change just the Field Order setting to Progressive. OK
       4. Change both the Remove and LFF settings. OK, but w/ interlace combing
    B. On DV NTSC sequence:
       1. Leave Interpret Footage parameters at current settings. Quite bad
       2. Change just the "Remove 24p DV Pulldown" setting. Worse
       3. Change just the Field Order setting to Progressive. Quite bad
       4. Change both the Remove and LFF settings. Lots of combing
    So, after this round, DV 24P sequence was best, either w/ default settings, or making field order progressive.
    Test 2: AVI export
    Created a split-screen test clip, on DV 24 P sequence, with no change on left, and change of setting from LFF to progressive on right (A1 & A3 above, which were the best after the first round).
    Exported to avi files, using:
    1. NTSC DV 24P preset, DV (24P Advanced) codec
    2. Lagarith codec, progressive
    3. Lagarith, LFF
    Played avi file on Media Player Classic and Windows Media Player.
    Not a lot of discernible difference among the three files.
    Test 3: HC Encoder
    Created *.avs fils for each of 3 test files (using Dan's directions), plus original avi (captured directly from the camera)
    (Note: HC Encoder doesn't like file names with spaces or underscores,apparently.)
    1. NTSC: couldn't open
    2. Input for encoding OK
    3. Input for encoding OK
    4. Original avi couldn't be decompressed
    So, the lagarith-encoded files work fine with HC Encoder, but I still have interlace combing artifacts - throughout Act 2, and at the curtain call for Sat (when the background is lighter -- is that significant?), and throughout (but not completely) Acts 2 & 3 for Fri (all on one tape). Act 1 either night doesn't appear to have a problem.
    Looking at the original captured footage (in MPC and Win Media Player), there is no interlacing problem, so it appears to be an issue with PP.
    Previewing the files in PP (before putting them in a sequence), there is no interlacing problem.
    When creating a new sequence, I tried: New Sequence, General, Playback Settings button, choose "Repeat Frame (ABBCD)" rather than "Interlaced Frame" (the default).
    This sort of fixed the problem -- no more combing, EXCEPT at the curtain call -- the very end of tape 3. The other footage that was combing is now a little softer -- kind of annoying, but I applied an Unsharp Mask filter (default settings), and it helped. (I also tried Auto Color, to see if it would quickly help the color. Not a good move: the color changes sometimes frame by frame, and all black becomes gray static. Obviously, I need to understand what that does next time I try to use it.)
    I decided to live with the combing at the end. (It was "good enough" at that point -- not a commercial project.) At least I've learned a lot.
    I put the .h2v and .aac files into Encore, created some menus and built it to a folder, to test the files one more time before committing them to plastic. It all looked good. Then, for one more hurdle, Encore didn't like my DVD burner ("unknown error"!) It worked last week! However, I used a different burner, since I had the DVD files already, and it worked fine. Phew!
    I'd love to know what the interlace combing at the end was about. My only guess it that it may be because I was using a sort-of-cheapo DV tape, recording over it for the third time. Maybe the tape was a bit stretched or something and the frames got out of synch at the very end. (?) If anyone has ideas, I'd be interested.

  • When I print pictures from my IMAC to my Hp C8180 they are grainy, even when I select the Best Quality- Why can't I get good quality printing from Imac ?

    When I print pictures from my IMAC to my Hp C8180 they are grainy, even when I select the Best Quality- Why can't I get good quality printing from Imac ?  Use the same printer with a PC and printed the same picture files-  they are printed with high quality-  Why can't the IMAC do the same?

    Does this involve iPhoto for the Mac?
    How exactly are you printing these photos?
    LN

Maybe you are looking for