Presence of Junk Characters in one screen and not in other screen

Hi ,
wat can be da reazon for Junk characters populating in one screen and looking fine in other screen.
This relates to HR Transactions : PP01 & 0001(IT)
Issue : 3000#### , junkies are comg in 0001 Infotype , but in Maintain Object PP01 T Code its okay.
pls guide.
Regards
Rohit.S

Can anyone know how to solve this issue?
SRI.

Similar Messages

When printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000

when printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000.
please can anbody help or advise?

You didn't mention any color calibration being done on your monitor. This is an essential part of any color-correct workflow. What are you using to calibrate your monitor (and your printer)?
Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer. The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
I don't know what you mean when you say "I choose a high standard print option".
Have you read the User Manual chapter on printing?
Printing Your Images
There is also a good appendix on calibration:
Calibrating Your Aperture System

How can i get Firefox to show on the whole screen/ it just uses the middle of the screen and not the whole screen Thank you

Certain web sites only use the middle of the monitor screen and do not show all their content on the right

You can use one of these extensions to adjust the default font size and page zoom on web pages:
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
* NoSquint - https://addons.mozilla.org/firefox/addon/2592

After upgrading to Yosemite, it now takes roughly 3 minutes for my computer to boot up, my sign in is now on my lap top screen and not my aux. screen as it has been and my touchpad won't work until sometime after booting up.

Slow boot, wrong screen & touchpad not connection correctly

So are they going to do anything with all of this or just act like Microsoft & hope it'll get better by its-self? I'm pretty disappointed and wish I'd stayed with Mavericks. Is there anyway to go back?

GL security works for one report and not for other report.

Hi everybody,
We have setup GL security and for our discoverer reports we are calling
APPS.GL_SECURITY_PKG.VALIDATE_ACCESS( sl.SET_OF_BOOKS_ID,gl.CODE_COMBINATION_ID ) = 'TRUE' in the query.
Now among 3 reports, 2 are working fine but one report is not showing any data if i use the above condition.
Hint: That particular report is based on a Materialized view.
Any ideas??
Thank you
--Kumar

Hi Rod,
Thanks for your reply but when i try to use the where
condition in the folder in Admin, its not recognizing the Apps.GL_SECURITY_PKG.VALIDATE_ACCESS....
Any Suggestion on this?
Thank you
--Kumar

PO approval hierarchy working on one user and not on other

Hi all,
I am using an approval hierarchy with one preparer and one approver for Purchase order and requisition.
User A is preparer and User B approver.
Requisition hierarchy is doing fine but the Purchase Order Hierarchy gives this error on forewarding the PO..:: " PO Approval Top Process : Error, Wait for Concurrent Programme"
If i assign a different user to this Preparer, the process works fine.
What am i doing worng or what issue am i over looking.
Thanks in Advance.

Found the solution.
Apperently on this installation, my preset named RegularExport should be found with name [RegularExport].
Strange that this works on on installation.

Why does wireless work for one laptop and not the other?

I have two laptops:
1) MacBook: 10.4.8, Airport Exteme (Firmware 1.0.46)
2) G4: 10.3.9, Airport Extreme (405.1 (3.90.0.p18)
I have the two machines sitting right next to each other in my apartment. Machine #1 has full wireless signal strength. Machine #2 barely has any wireless signal. Neither is running Interference Robustness. Any ideas why one would work and the other would not, or suggestions as to how to debug this problem?
I have tried stopping and restarting the Airport Extreme card on machine #2. I have also tried power cycling machine #2. This does not fix the problem.
A little more history: for a long time I was having problems with machine #2 dropping the wireless connection. As part of trying to work around these problems I turned on Interference Robustness on machine #2. This fixed the dropping signal problem, but left me with weak signal strength. I shut off Interference Robustnes but ever since then the signal has still been weak on machine #2.
Mac Mini Duo 1.66 GHz, 2 GB Mac OS X (10.4.6)

The base station uses a single channel which all clients must use to connect.
Have you checked the antenna connection into the card? Many people are surprised about how far the wire is actually supposed to be pushed into the card. Compare the connection with the photos in KB 108039, Properly attaching the antenna on an AirPort Extreme Card.

All apps running slow in one account and not the others on my iMac

I have iMac (intel) 20" with Lion 10.7.3 with 4 GB of RAM. The problems is that one of my accounts all the applications run very very slow.
This account is one of two admin accounts. None of the other accounts have this problems. Does anyone have a suggest of what I can do.
I have tried reloading Safari, thinking it might be related to the recent flashback virus. I event downloaded a script from Mashable and they indicated that there was no Flashback Virus on my iMac. I also download that latest update from Apple for the JVM
So my questions is what is causing only one of my user accounts to be very very slow and it seems to be affecting all the applications.

Most likely corrupt or conflicting preferences files. While logged into the good admin account, backup the bad account's folder, delete the bad account, selecting the save data option (which stores the data in /Users/Deleted Users/ as a disk image), recreate the bad account using the same username/password combo, log out and back into the recreated original account. If the problem's solved, open the saved data dmg file in /Users/Deleted Users/, open the /Library/Preferences/ folder from the saved data, open the current /Users/restored account/Library/Preferences/ folder, and slowly copy plist files from the saved data folder to the current one that don't exist in it. Log out and back in to ensure there's no conflict and things still work correctly. Resolving conflicts or identifying corrupt plist files is a laborious process. Good luck.

Deleting mail from one app and not the other

Hi,
I'm using Outlook 2011 on my Mac Pro and Apple Mail on my laptop. Outlook has a feature where you can "Delete copies from the server (After Deleting From This Computer)".
I've looked everywhere but Mail doesn't have this feature. How can I tell Mail to do the same as Outlook?
Thanks!

You are mixing two things -- server vs second computer. I have assumed this is a POP account because the option you mention is associated with POP accounts. Were it an IMAP account, then the Inbox resides on the server and if a message is deleted, no matter from what computer, it will be gone from the Inbox and server, and you would not have needed to ask the question.
So assuming it is a POP account, there is no email client -- Outlook included -- that will delete a message that has already been downloaded onto another computer from that second computer. What can be done, consistent with your original question, is that instructions can be given to remove the message from the POP3 server upon certain actions on any computer that has downloaded the message.
Where you see the option to remove from the server after one week, there is also the option to remove from the server when moved from the Inbox. Deleting is but one action that will remove a message from the Inbox, but this option if selected will then remove the message from the server.
Is this clear now?
Ernie
Message was edited by: Ernie Stamper

How can I fix my iSight settings when it works on one account and not the other?

iSight continually crashes third party applications. I've checked another account on my MBP, and iSight works on different accounts. What settings can I troubleshoot on the account?
Thank you!

Although the documentation says you can copy Time Machine backups in the Finder, it's very slow and sometimes doesn't work at all.
Launch Disk Utility, open the built-in help, and search for the term "Duplicate." Follow the instructions. All existing data on the destination volume will be erased. That shouldn't be a problem, because you don't want to mix backup and non-backup data on the same drive anyway. Turn Time Machine OFF in its preference pane while copying the volume.

Events working on one server and not the other

We have a development and a production server for LC. I have events working on the development server that accept parameters.
The services were deployed to the production server and the following error occured:
2010-05-04 09:14:04,203 ERROR [STDERR] May 4, 2010 9:14:04 AM com.adobe.idp.scheduler.callback.ServiceCallbackHandler execute
SEVERE: Exception thrown while calling back a DSC componentINVALID_CHARACTER_ERR: An invalid or illegal XML character is specified.
2010-05-04 09:14:04,203 INFO [org.quartz.core.JobRunShell] Job Asynchronous.SWR.RAAC.RequestSendEmail:12729788401870.18563775243350922 threw a JobExecutionException:
org.quartz.JobExecutionException: java.lang.Exception: org.w3c.dom.DOMException: INVALID_CHARACTER_ERR: An invalid or illegal XML character is specified.
[See nested exception: java.lang.Exception: org.w3c.dom.DOMException: INVALID_CHARACTER_ERR: An invalid or illegal XML character is specified. ]
    at com.adobe.idp.scheduler.callback.ServiceCallbackHandler.execute(ServiceCallbackHandler.ja va:102)
    at org.quartz.core.JobRunShell.run(JobRunShell.java:202)
    at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:529)
Caused by: java.lang.Exception: org.w3c.dom.DOMException: INVALID_CHARACTER_ERR: An invalid or illegal XML character is specified.
    at com.adobe.idp.scheduler.callback.ServiceCallbackHandler.execute(ServiceCallbackHandler.ja va:101)
    ... 2 more
Caused by: org.w3c.dom.DOMException: INVALID_CHARACTER_ERR: An invalid or illegal XML character is specified.
    at org.apache.xerces.dom.CoreDocumentImpl.createElement(Unknown Source)
    at com.adobe.idp.event.xml.XMLGenerator.createElement(XMLGenerator.java:500)
    at com.adobe.idp.event.xml.XMLGenerator.createEventDataDocument(XMLGenerator.java:293)
    at com.adobe.idp.event.content.EventContent.createEventDataXML(EventContent.java:173)
I took the xml from the production service and ran it through the development server, it worked fine.
Any idea as to where to start the troubleshooting?
Cheers,

It would seem that when the LCA we created to be pushed to production, the event template XSD did not get rolled up. So when the LCA was deployed, there was no definition for the event.
What would cause this? Do you have to select another option when creating the LCA? Do you have to re-define the template after the LCA is deployed?
Further information would be greatly appreciated.

I bought a 5th Gen Touch. I use iTunes 12 on two computers. One computer allows me to drag and drop. The other does not.The one that allows it has problems. Any idea as to why I can drag and drop on one and not the other. Both are authorized.

I bought a 5th Gen Touch. I use iTunes 12 on my two computers. I first connected the Touch to my desktop and it allows me to drag and drop mp3 files from my old Classic, which is backed up to a directory. Unfortunately, that computer has gone down before I got a chance to fill the Touch. I have the files on another computer but when I connect the Touch to it, it doesn't allow me to drag and drop the files. I have iCloud set on both systems and I have manual management check marked. I'm not understanding why it allows drag and drop on one PC and not the other when they are both set the same way. My question? What do I need to do to be able to drag and drop in iTunes 12? I didn't do anything special on the computer that allows it so I am at a loss.
Thank you!

Oh, also want to add that the PC I'm currently using is:
Windows Vista Home Premium Service Pack 2
My other PC was:
Windows 7 Ultimate
My MacBook is:
Max OSX 10.5.something (the last update available for it. .8 maybe? haha)
Not sure if this stuff is important, but I thought I'd add it.

How do I get my iPad to open to the lock screen and NOT the passcode panel when I open my cover

When I open the cover to my iPad Air it is open to the 4digit passcode screen and NOT my lock screen with the date and time. When I go to settings under Touch ID and passcode I see 'require passcode' immediately with a check near it. When I click on that and try to UNcheck it, nothing happens. How do I get my iPad to open to the lock screen

When I open the cover to my iPad Air it is open to the 4digit passcode screen and NOT my lock screen with the date and time. When I go to settings under Touch ID and passcode I see 'require passcode' immediately with a check near it. When I click on that and try to UNcheck it, nothing happens. How do I get my iPad to open to the lock screen

Ipad screen went white with gray/black line through it. Worked one minute and not the next. It has not been jailbroken.

The ipad screen has went white and has a gray line running through the middle of it. It worked one minute and not the next. It has not been jail broken.

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds). No data will be lost.

Splash Screen and not beyond... Closes abruptly? PE8 WinXP SP2

Splash Screen and not beyond... Closes abruptly? PE8 WinXP Professional SP2:
I got a lot of good info from the forum today, I do not have the internet at my house, which has added to this $100+ headache so I'm gonna try some stuff tonight and check back here tommorrow.
1. I would have tried uninstalling and re-installing but it came up with some serial number message, because I can't register online from my home I don't want to get locked out of the program or something, hey, it could happen knowing all this security crap.
2. I get the splash screen like others have, but I don't get the actual program: Premiere Elements 8, it runs through all the plugins on the application startup screen and then closes w/o any explanation.
3. After trying to get things working, "ElementsAutoAnalyzer.exe" is taking up 100+ mb ram in the background. What is this thing?
so far annoyed, but hopeful, still love my other Adobe Apps.
Feel free to address anything, I apreaciate it!! Even links to other articles, hopefully I'll figure it out tonight, I will post success / failure.
Thanks,
Robb

I want to add as much info as I can:
*Splash screen shows up, but only the video/image viewer/manager hub or whatever is able to open.
*I can open up the Premiere Elements program to the intro loading screen, once it loads the plugins it closes.
*I've tried every possible combination within the video manager hub thing to access the Video editing (Elements) software, it may show the loading screen then it closes with nothing, (the video manager remains open still).
Installed: Adobe Premiere Elements 8.0 from DVD 1, I did not install templates from Disc 2 or whatever.
*"Single Processor Detected" (I think that's what it said)
*I set up Service Pack 2, because it wouldn't let me install until I did this.
*I have Windows XP Professional
*I have plenty of HardDrive space. Don't think RAM is a problem.
What I'm going to do tonight:
*Install latest Quicktime 7.something, (downloaded on 11-01-09) from Quicktime.com
*Uninstall the unnessesary driver file mentioned in another post. (or disable it by renaming it)
*Hold shift key while opening program to clear cache, I read that somewhere.
*Possibly re-install software, hopefully I could get back in with my Serial.
-I printed out Trouble shooting section from Adobe.com.
Please leave suggestions, I'm sure I'm not the only one who will benefit.
Robb
(I got my receipt, I really don't want to use it)

Presence of Junk Characters in one screen and not in other screen

Similar Messages

Maybe you are looking for