Present a total count of rows

I'd like to present a total count of rows in the bottom of a report.
how would you recommand me to do it???
the point is that it must be presented in each report so i thought to add some HTML code to "After Rows" section in the report template. but i need a variable (or some substitution string) which will contain the total count. but how do i define a substitution string?

as i mentioned i need to present a total count in the buttom of each report in my application. therefore I think it's reasonable to add a code in the report template, which present some variable which count all rows in a report.
#TOTAL_ROWS# doesn't work if i place it on the template html code, though it works fine if i place it in the report region definition:
<br><b>Total Number of Results:</b> #TOTAL_ROWS#.</br>
why can't i use #TOTAL_ROWS# as a template variable? and how can i do that?

Similar Messages

Total count and count based on column value

Primaryid Id     Status
1            50          1
2            50          1
3          50          1
4            50          3
5           50          2
6            50          1
7            51         1
8            51         2Im looking for a query which returns total count of rows for id 50 and count of rows with status 1
something like
Id    count_total   count_total_status1
50        6              4
51        2              1Any suggestion ?

SQL> select * from t4;
PID ID STATUS
1 50 1
2 50 1
3 50 1
4 50 3
5 50 2
6 50 1
7 51 1
8 51 2
已选择8行。
SQL> select distinct id,count(id),sum(decode(status,1,1,0)) from t4 group by id;
ID COUNT(ID) SUM(DECODE(STATUS,1,1,0))
51 2 1
50 6 4

SQL statement with LIMIT and total count?

Hello,
I would like to know if it is possible to execute a single SQL statement that will return me a subset of data (for pagination purposes) that not only includes the subset of data for the page but the count of all available data. Can this be done so as to not take up the cpu and time it takes to essentially run two queries? One to get the subset and one to get the count? I think simply doing a subselect is not going to give me what I want in that we actually query twice.
There may be no way to do this other than that, but I wanted to check with the gurus here first. :)
Thanks,
Mark

select *
from (
select i.*,
row_number() over(order by i) rn, -- used for
pagination
count(*) over(partition by 1) cnt -- total count
of rows found for this search
from mytable
where < PUT ALL LIMITING (i.e., "search") CONDITIONS
HERE >
where rn between 41 and 50 -- pagination clauseNice one
BUT of course it adds additional row in execution plan and takes additional time and CPU :)
I assume that it directly depends of course on returned result set and some other factors like available sort space but a simple test case on a table big which actually is 1.6 M rows like dba_source got following results:
here is the first one returning also count(*)
SQL> select *
2 from (
3    select i.*,
4      row_number() over(order by owner, name, type) rn
5 , -- used for pagination
6      count(*) over(partition by 1) cnt -- total count of rows found for this search
7    from big i
8    where owner like 'S%' and name like '%A%'
9 )
10 where rn between 41 and 45
11 /
OWNER                          NAME                           TYPE
      LINE
TEXT
        RN        CNT
SYS                            ANYDATA                        TYPE
        13
STATIC FUNCTION ConvertVarchar(c IN VARCHAR) return AnyData,
        41     999744
SYS                            ANYDATA                        TYPE
        11
STATIC FUNCTION ConvertDate(dat IN DATE) return AnyData,
        42     999744
SYS                            ANYDATA                        TYPE
         9
        43     999744
SYS                            ANYDATA                        TYPE
         7
     They serve as explicit CAST functions from any type in the Oracle ORDBMS
        44     999744
SYS                            ANYDATA                        TYPE
         6
     enable construction of the AnyData in its entirity with a single call.
        45     999744
Elapsed: 00:00:41.02
SQL> ed
Wrote file afiedt.buf
1 select n.name, m.value from v$statname n, v$mystat m
2 where n.statistic# = m.statistic#
3*   and (upper(name) like '%SORT%' or upper(name) like '%TEMP%')
SQL> /
NAME                                                                  VALUE
physical reads direct temporary tablespace                            35446
physical writes direct temporary tablespace                           17723
RowCR attempts                                                            0
SMON posted for dropping temp segment                                     0
sorts (memory)                                                           36
sorts (disk)                                                              1
sorts (rows)                                                        1999596
OTC commit optimization attempts                                          0
8 rows selected.here is the second one returning only rows:
SQL> ed
Wrote file afiedt.buf
1 select *
2 from (
3    select i.*,
4      row_number() over(order by owner, name, type) rn
5 --, -- used for pagination
6 --    count(*) over(partition by 1) cnt -- total count of rows found for this search
7    from big i
8    where owner like 'S%' and name like '%A%'
9 )
10* where rn between 41 and 45
SQL> /
OWNER                          NAME                           TYPE
      LINE
TEXT
        RN
SYS                            ANYDATA                        TYPE
        13
STATIC FUNCTION ConvertVarchar(c IN VARCHAR) return AnyData,
        41
SYS                            ANYDATA                        TYPE
        11
STATIC FUNCTION ConvertDate(dat IN DATE) return AnyData,
        42
SYS                            ANYDATA                        TYPE
         9
        43
SYS                            ANYDATA                        TYPE
         7
     They serve as explicit CAST functions from any type in the Oracle ORDBMS
        44
SYS                            ANYDATA                        TYPE
         6
     enable construction of the AnyData in its entirity with a single call.
        45
Elapsed: 00:00:12.09
SQL> select n.name, m.value from v$statname n, v$mystat m
2 where n.statistic# = m.statistic#
3    and (upper(name) like '%SORT%' or upper(name) like '%TEMP%')
4 /
NAME                                                                  VALUE
physical reads direct temporary tablespace                                0
physical writes direct temporary tablespace                               0
RowCR attempts                                                            0
SMON posted for dropping temp segment                                     0
sorts (memory)                                                           10
sorts (disk)                                                              0
sorts (rows)                                                         999812
OTC commit optimization attempts                                          0
8 rows selected.So execution time 41 sec vs 12 sec
sorts (rows) 1 999 596 vs 999 812
physical reads/writes direct temporary tablespace 35446/17723 vs 0/0
I assume that for a small overall returned row count it probably is OK, but for less restrictive search it can be quite deadly as before with two queries.
Gints Plivna
http://www.gplivna.eu

Count total number of rows present in the schema

Count total number of rows present in the schema including table, sequence, view
Desirable Output
table          Sequence     Views
1000          20          1000

You mean You need to count the No of Tables, View and Sequence Present in the Schema ??
Hi Some thing like this,
SELECT a.view_cnt AS "View Count", b.tab_cnt AS "Table Count",
       c.seq_cnt AS "Sequence Count"
FROM (SELECT COUNT (*) view_cnt
          FROM USER_VIEWS) a,
       (SELECT COUNT (*) tab_cnt
          FROM USER_TABLES) b,
       (SELECT COUNT (*) seq_cnt
          FROM USER_SEQUENCES) cWhich give you,
View Count      Table Count      Sequence Count
       153              878                   32Thanks,
Shankar
Edited by: Shankar Viji on Aug 28, 2012 3:03 AM

Getting the count of rows present in the oracle table

Hi all,
i want to get the total number of rows present in the sql table to the appmodule.
After applying the some view criteria to the view object. if it try with getallrowsinrange it was giving count of rows present in the viewobject but i want total number of rows present in the sql table.
How can i get that
I am using jdev 11.1.1.5
Thanks in advance

I threw something together, quick and dirty, feel free to optimize.
Assuming that you want the table count, I put the code into a EntityDefImpl subclass since this is what represents a table in the middle-tier.
public class EmpDefImpl
      extends EntityDefImpl {
   * This is the default constructor (do not remove).
public EmpDefImpl( ) {}
//~ Methods ****************************************************************************
public long getTableRowCount( DBTransaction transaction ) {
    String query = getQuery( );
    String countQuery = String.format( "SELECT COUNT(*) FROM (%s)", query );
    long count = 0;
    ViewObject vo = transaction.createViewObjectFromQueryStmt( countQuery );
    try {
      vo.executeQuery( );
      Row row = vo.first( );
      Number number = (Number)row.getAttribute( 0 );
      count = number.longValue( );
    } finally {
      vo.remove( );
    return count;
}Depending on your type map, you might not get a oracle.jbo.domain.Number, but something else, so the cast might need correction.
Usage example:
public class EmpEditViewImpl extends ViewObjectImpl {
public EmpEditViewImpl() {
protected void executeQueryForCollection( Object object, Object[] object2, int i ) {
    super.executeQueryForCollection( object, object2, i );
    EmpDefImpl def = ( EmpDefImpl )getEntityDef( 0 );
    long tableRowCount = def.getTableRowCount( getDBTransaction() ) );
    // Do something with it
}As you can see, the code is pretty generic. You might also be able to put this into an ADF extension base class.
Sascha
Edited by: Sascha Herrmann on Jun 7, 2012 2:39 PM

[Forum FAQ] How to calculate the total count of insert rows within a Foreach Loop Container in SSIS?

Introduction
We need to loop through all the flat files that have the same structure in a folder and import all the data to a single SQL Server table. How can we obtain the total count of the rows inserted to the destination SQL Server table?
Solution
We can use Execute SQL Task or Script Task to aggregate the row count increment for each iteration of the Foreach Loop Container. The following steps are the preparations before we add the Execute SQL Task or Script Task:
Create a String type variable FilePath, two Int32 type variables InsertRowCnt and TotalRowCnt.
Drag a Foreach Loop Container to the Control Flow design surface, set the Enumerator to “Foreach File Enumerator”, specify the source folder and the files extension, and set the “Retrieve file name” option to “Fully qualified”.
On the “Variable Mappings” tab of the container, map the variable FilePath to the collection value.
Drag a Data Flow Task to the container, in the Data Flow Task, add a Flat File Source, a Row Count Transformation, and an OLE DB Destination, and join them. Create a Flat File Connection Manager to connect to one of the flat files, and then configure the
Flat File Source as well as the OLE DB Destination adapter. Set the variable for the Row Count Transformation to “User::InsertRowCnt”.
Open the Property Expressions Editor for the Flat File Connection Manager, and set the expression of “ConnectionString” property to
“@[User::FilePath]”.
(I) Execute SQL Task Method:
In the Control Flow, drag an Execute SQL Task under the Data Flow Task and join them.
Create one or using any one existing OLE DB Connection Manager for the Execute SQL Task, set the “ResultSet” option to “Single row”, and then set the “SQLStatement” property to:
DECLARE @InsertRowCnt INT,
               @TotalRowCnt INT
SET @InsertRowCnt=?
SET @TotalRowCnt=?
SET @TotalRowCnt=@InsertRowCnt+@TotalRowCnt
SELECT TotalRowCnt=@TotalRowCnt
On to parameter 1.
On the “Result Set” tab of the Execute SQL Task, map result 0 to variable “User::TotalRowCnt”.
(II) Script Task Method:
In the Control Flow, drag a Script Task under the Data Flow Task and join them.
In the Script Task, select variable InsertRowCnt for “ReadOnlyVariables” option, and select variable TotalRowCnt for “ReadWriteVariables”.
Edit the Main method as follows (C#):
public void Main()
// TODO: Add your code here
int InsertRowCnt = Convert.ToInt32(Dts.Variables["User::InsertRowCnt"].Value.ToString()
int TotalRowCnt = Convert.ToInt32(Dts.Variables["User::TotalRowCnt"].Value.ToString());
TotalRowCnt = TotalRowCnt + InsertRowCnt;
Dts.Variables["User::InsertRowCnt"].Value = TotalRowCnt;
Dts.TaskResult = (int)ScriptResults.Success;
          Or (VB)
          Public Sub Main()
        ' Add your code here
        Dim InsertRowCnt As Integer =
        Convert.ToInt32(Dts.Variables("User::InsertRowCnt").Value.ToString())
        Dim TotalRowCnt As Integer =
        Convert.ToInt32(Dts.Variables("User::TotalRowCnt").Value.ToString())
        TotalRowCnt = TotalRowCnt + InsertRowCnt
        Dts.Variables("User::TotalRowCnt").Value = TotalRowCnt
        Dts.TaskResult = ScriptResults.Success
       End Sub
Applies to
Microsoft SQL Server 2005
Microsoft SQL Server 2008
Microsoft SQL Server 2008 R2
Microsoft SQL Server 2012
Microsoft SQL Server 2014
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Hi ITBobbyP,
If I understand correctly, you want to load data from multiple sheets in an .xlsx file into a SQL Server table.
If in this scenario, please refer to the following tips:
The Foreach Loop container should be configured as shown below:
Enumerator: Foreach ADO.NET Schema Rowset Enumerator
Connection String: The OLE DB Connection String for the excel file.
Schema: Tables.
In the Variable Mapping, map the variable to Sheet_Name, and change the Index from 0 to 2.
The connection string for Excel Connection Manager is the original one, we needn’t make any change.
Change Table Name or View name to the variable Sheet_Name.
If you want to load data from multiple sheets in multiple .xlsx files into a SQL Server table, please refer to following thread:
http://stackoverflow.com/questions/7411741/how-to-loop-through-excel-files-and-load-them-into-a-database-using-ssis-package
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

How to get count of last 30 days and total of count of rows in a single query

Hi All,
My requirement is to write a sql query with the following requirement
I have a table TEST which has 6500 rows out of which the created date > 30 which means records from last 30 days are like 60.So if i write a query like this
Select Count(*) from TEST where CreatedDdate > 30
This one would give me last 30 days count but in the same query i also want the count(*) which would be 6500
So my output should be one row with 6500 in one column and 65 in second column
Can someone please help me on how to do this?
If you have any questions or if i am unclear please let me know.
Thanks

declare @sdate table(sdate date)
insert into @sdate
values('20150418'),('20140418')
Select Count(*) as [total],count(case when(datediff(day,sdate,getdate()))<30 then 1 else null end) as [Last30days] from @sdate
Hope it Helps!!

Inserting total column and row

Hello All,
I'm new to WebI and BOBJ and I'm having some issue with my first report. I've tried searching the forum for this same issue (or something similar) and came across nothing. Any help is greatly appreciated!
I'm having a problem inserting a Grand Total column and row to my report. Here's a sample layout of my report:
*Tech Type | Project | Role | Key Fig1 | Key Fig 2 | Key Fig 3 | Key Fig 4|*
Proj 1
Subtot
Proj 2
Subtot
etc
In one tab the key figures are grouped by month and I also created four tabs (one tab for each key figure) that lists the key figures by month.
What I wish to do is insert one row at the end of the report which sums the key figures vertically and a column that adds the key figures horizontally. I've tried to do SUM but that inserts a row/column after every key fig. I've also tried to do a count and insert a SUM formula with the same effect (a row/column is inserted after every key figure).
Any suggestions?
Thanks,
Joaquim M.

Joaquim,
Through your posting it's hard to visualize what is happening, other than you are not satisfied with the results. Here are the steps for adding a sum to a horizontal grid with perhaps two columns of information (month, figures). After the grid is presented, left-click once on the data of figures (do not click on the header cell of figures, click on any cell just below the header). Once you left-click the column will appear with a "grey" highligting. Next is to click on the "sigma" icon drop-down and choose "Sum". Once you click sum a new row at the very bottom of your grid should appear, summarizing [figures].
Thanks,
John

How to find total count of records in a cursor

Aassume below is the cursor i defined
cursor c1 is select * from emp;
now, i want to find the total count of records in this cursor using an existing function etc., using one line statement.
FYI: c1%rowcount is always giving 0, so i cant rely on this.
Any thoughts, please share.
Thanks in advance.

I am just showing this to show how to get the rowcount along with the cursor, if the program has so much gap of between verifying the count(*) and opening the cursor.
Justin actually covered this, he said, oracle has to spend some resources to build this functionality. As it is not most often required, it does not makes much sence to see it as a built-in feature. However, if we must see the rowcount when we open the cursor, here is a way, but it is little bit expensive.
SQL> create table emp_crap as select * from emp where 1 = 2;
Table created.
SQL> declare
2   v_cnt     number := 0;
3   zero_rows         exception;
4 begin
5    for rec in (select * from (select rownum rn, e.ename from emp_crap e) order by 1 desc)
6     loop
7        if v_cnt = 0 then
8           v_cnt := rec.rn;
9        end if;
10     end loop;
11     if v_cnt = 0 then
12        raise zero_rows;
13     end if;
14   exception
15    when zero_rows then
16      dbms_output.put_line('No rows');
17   end;
18 /
No rows
PL/SQL procedure successfully completed.
-- Now, let us use the table, which has the data
SQL> declare
2   v_cnt     number := 0;
3   zero_rows         exception;
4 begin
5    for rec in (select * from
6          (select rownum rn, e.ename from emp e)
7          order by 1 desc)
8     loop
9        if v_cnt = 0 then
10           v_cnt := rec.rn;
11           dbms_output.put_line(v_cnt);
12        end if;
13     end loop;
14     if v_cnt = 0 then
15        raise zero_rows;
16     end if;
17   exception
18    when zero_rows then
19      dbms_output.put_line('No rows');
20   end;
21 /
14
PL/SQL procedure successfully completed.Thx,
Sri

Total count to be displayed in subtotal ALV(GRID Display)

Hello ,
I want to display total count in subtotal.
                             720 Mr JORGE 522,06
                             720 Mr JORGE 566,23
                             720 Mr JORGE 100,33
                             720 Mr JORGE 123,33
                             720 Mr JORGE 332,22
subtotal ->            720                  1644.2 Count 5
                             888 Ms Mariam 100,00
subtotal ->            888                    100,00 Count 1
Is this possible? Plz dont post same answers how to display subtotal. I am able to display subtotal , only issue is to display with count.
Edited by: Vimalnair on Aug 19, 2009 9:37 AM

Hi,
You cannot have subtotal for particular number of rows of ALV,
but if you want to get the total number of rows of the ALV data display
you can describe your final internal table from which the data is
getting displayed in ALV output and get it displayed in the header
or footer area of the ALV output.
For Eg:
DATA V_LINES TYPE I.
DESCRIBE TABLE IT_FINAL LINES V_LINES.
DATA: it_header TYPE slis_t_listheader,
      wa_header TYPE slis_listheader.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
*    I_INTERFACE_CHECK                 = ' '
*    I_BYPASSING_BUFFER                = ' '
*    I_BUFFER_ACTIVE                   = ' '
      i_callback_program                = sy-repid
      i_callback_pf_status_set          = 'PF_STATUS'
      i_callback_user_command           = 'COMM'
      i_callback_top_of_page            = 'TOP'   "This top will call the subroutine namely TOP
FORM top.
REFRESH it_header.
wa_header-typ = 'S'.
wa_header-key = text-001.
wa_header-info = sy-repid.
APPEND wa_header TO it_header.
CLEAR wa_header.
wa_header-typ = 'S'.
wa_header-key = text-002.
wa_header-info = sy-uname.
APPEND wa_header TO it_header.
CLEAR wa_header.
wa_header-typ = 'S'.
wa_header-key = text-003.
wa_header-info = V_LINES.    "This will print the total number of lines in the header
APPEND wa_header TO it_header.
CLEAR wa_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary       = it_header
*   I_LOGO                   =
*   I_END_OF_LIST_GRID       =
*   I_ALV_FORM               =
ENDFORM.                    "TOP
Hope it helps
Regards
Mansi

Display the total number of rows for the report in OBIEE 11g

Hi, In obiee 11g, the pagination will be 1-25. Is there any possiblity in obiee to show the total rows count next to pagination. Ex: if the result contains 120 rows. it should display after the pagination
Records 1-25. Total of Records : 120
Is there any way we can display the total number of rows for the report.
Kindly help me.. Its very urgent requirement.
MAny Thank in advacne

Check this http://obiee100.blogspot.com/2011/07/display-total-number-of-records-in.html
and
http://docs.oracle.com/cd/E28280_01/bi.1111/e10544/appsql.htm#CHDCDIDA
You have to go something like as suggested in previous link.
Mark as correct/helpful

Count ALL rows in databases

Hi experts!
I need the total number of ROWS in EACH database i have (All schema)
I've tried this for each DB
select sum(num_rows)
from sys.dba_tables
where owner like '%%'
i obtain the number of all rows for all schema in database.
I have many database, i use agent g10.0 and enterprice manager to query them.
I
've seen that in Enterprise Manager, when you select a Database Istance, then go on "administration" tab, and u click on TABLES link, you can see number of rows and last time the table was analyzed. How are they have been calculated? With table dba_tables? How can i query to obtain these values?
I know it's a stupid task but my boss wants this info :(

> I know it's a stupid task but my boss wants this info :(
Tell him two gazillion. Also tell him that the gazillion scale has been specifically created for managers like him with heads firmly stuck up the back side.
Anyway, here's some sample code. Note that you cannot use DBA_TABLES view. Object tables are not listed in there and they can contain rows (obviously). There is also the case of dealing with case and "weirdly" names tables - thus double quotes are needed.
I only did the first 10 tables.. It is stupid to just one, never mind all of them in database...
SQL> declare
2 type TStrings is table of varchar2(1000);
3
4 cursor c is
5 select '"'||owner||'"."'||object_name||'"' as TAB_NAME from dba_objects where object_type='TABLE' and rownum < 11 order by 1;
6
7 tabList TStrings;
8 sqlSelect varchar2(1000);
9 cnt integer;
10 total integer;
11
12 procedure W( line varchar2 ) is
13 begin
14 DBMS_OUTPUT.put_line( line );
15 end;
16 begin
17 total := 0;
18 open c;
19 loop
20 fetch c bulk collect into tabList limit 100;
21 for i in 1..tabList.Count
22 loop
23 sqlSelect := 'select count(*) from '||tabList(i);
24 begin
25 execute immediate sqlSelect into cnt;
26 total := total + cnt;
27 W( sqlSelect || ' ' || cnt || ' rows(s)' );
28 exception when OTHERS then
29 W( sqlSelect || ' ' || sqlerrm(sqlcode) );
30 end;
31 end loop;
32 exit when c%NOTFOUND;
33 end loop;
34 close c;
35 W( total|| ' gazillion rows in the database' );
36 end;
37 /
select count(*) from "SYS"."CLU$" 10 rows(s)
select count(*) from "SYS"."COL$" 43696 rows(s)
select count(*) from "SYS"."CON$" 2898 rows(s)
select count(*) from "SYS"."FILE$" 5 rows(s)
select count(*) from "SYS"."ICOL$" 2184 rows(s)
select count(*) from "SYS"."IND$" 1434 rows(s)
select count(*) from "SYS"."PROXY_ROLE_DATA$" 0 rows(s)
select count(*) from "SYS"."SEG$" 3032 rows(s)
select count(*) from "SYS"."UET$" 0 rows(s)
select count(*) from "SYS"."UNDO$" 11 rows(s)
53270 gazillion rows in the database
PL/SQL procedure successfully completed.
SQL> PS. Cursor needs fine tuning as certain table objects cannot be directly accessed via a SELECT statement (e.g. nested tables, overflow IOT tables, etc).

Count of Rows Displayed after Filter Applied

Hi,
I have a WebI report where I am manually filtering the data displayed within the report based on user input. For example, a user enters a Max Value and I am filtering out all employees who have a total value (mulitple rows summed up) greater than the prompt value.
The issue I am facing is displaying a row count at the top of the report in a free-standing cell. Normally I would simply use count(Field;All) but since the number of rows returned by the query is different from the number of rows actually displayed in the table, this option isn't available.
Any ideas would be greatly appreciated.
Thanks!
Jeff

Hi Jeff,
Try creating a formula in the cell, or a variable with a "Where" clause and add the correct context, using "In" or "ForEach". Or you may be able to do it in the formula in the cell. Or you may need to use the "UserResponse" function, depending on what you are trying to do.
Thanks
Edited by: wavery on Feb 15, 2011 9:14 PM

Get the count of rows in a table control

Hi Experts,
How do I get the count of the rows in a table control during run time.
I am developing a BDC in which I have to check all entries in a table control.
My requirement is to get the total number of rows in a table control dynamically.
Thanks
Kumar

Hi,
Use a variable when u r passing the records from the internal table to the screen fields
and display the same.
I think this idea may help u.
And pls explain me ur requirement clearly.
Refer to the following link this may help u.
http://sapabapnotes.blogspot.com/2008/03/working-with-ecatt-extended-computer.html
Reward if helpful.
Jagadish

Count of rows in ALv report

Hi!
I would like to get the count of rows in my ALV report . How to get the count of the rows ? Can anyone guide me in getting it dome please.
Thanks

Hi Gaddemmedi!
I am attaching the report as you had asked for. I have added the things you asked me to do and now I am getting the count on the top of the page. The problem is that though it shows me the count of the lines from the LAV report on top but when I try to filter the records in the report that count first of all dosent change and remain the same as the initial number of record though after filtering records reduce and over that the count lines keep on increasing I mean the count is shown in repeated lines afet lines. Kindly help please.
Thanks
*& Report ZSD_BILLING_HDR_TEXT_sum                                       *
*&         billing doc. and associated header text report              *
*&                            CHANGE LOG                               *
*& jpoon 2007.08.03                  Change request: DEVK905095        *
*& Move request: SD_1451_01          Requestor: Mona Fox               *
*& FP14134 - original code.                                            *
REPORT zsd_billing_hdr_text_sum MESSAGE-ID zsd NO STANDARD PAGE HEADING.
* For ALV usage
TYPE-POOLS: slis.
DATA: gs_layout   TYPE slis_layout_alv,
      tp_print    TYPE slis_print_alv,
      gt_sort     TYPE slis_t_sortinfo_alv,
      gt_events   TYPE slis_t_event,
      t_fieldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE,
      repid       TYPE syrepid,               " ABAP Program.
      gt_list_top_of_page TYPE slis_t_listheader,     " Top of page text.
      alv_variant   TYPE disvariant," Customize Disp. Variant
      w_event type slis_alv_event.
DATA: w_field    TYPE slis_fieldcat_alv.
TABLES: vbrk, vbrp, vbpa.
DATA SLIS_EV_AFTER_OUTPUT.
data: gs_list_top_of_page type slis_listheader.
*data: gt_list_top_of_page type slis_t_listheader.
* Definition of selection screen                                       *
*   By plant, storage location, sold-to customers, material and        *
*   posting date of the sales orders                                   *
SELECTION-SCREEN BEGIN OF BLOCK one WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_vbeln FOR vbrk-vbeln,      " billing doc.
                s_kunnr FOR vbpa-kunnr,      " bill-to customer number.
                s_werks FOR vbrp-werks,      " line item plant.
                s_fkdat FOR vbrk-fkdat,      " billing date.
                s_fkart FOR vbrk-fkart,      " billing type.
                s_vkorg FOR vbrk-vkorg.      " sales org.
PARAMETERS:     p_hold   AS CHECKBOX.
SELECTION-SCREEN END OF BLOCK one.
* ALV display layout
SELECTION-SCREEN BEGIN OF BLOCK layout WITH FRAME TITLE text-003.
PARAMETERS: pa_vari TYPE slis_vari DEFAULT ' '. " Display variant.
SELECTION-SCREEN END OF BLOCK layout.
* Data Definitions                                                     *
* Storing Extracted Info.
TYPES: BEGIN OF t_extract,
         vbeln        TYPE vbeln_vf,   " Sales order number.
         posnr        TYPE posnr,      " line item
         fkart        TYPE fkart,      " billing type.
         vtext        TYPE BEZEI20,    " billing type description.
         fkdat        TYPE fkdat,      " billing date.
         werks        TYPE werks_d,    " line item plant.
         werks_name1 TYPE name1,      " plant description.
         kunnr        TYPE kunnr,      " bill-to customer.
         kunnr_name1 TYPE name1_gp,   " bill-to description.
         netwr        TYPE netwr,      " net value,invoice total $
         zzflag       TYPE boolean,    " hold indicator
         zzreason     TYPE char30,     " header text2 (reason)
         zzuser       TYPE ernam,      " last changed by
         zz_changed_date TYPE dats,    " last changed date
         zz_changed_time TYPE tims,    " last changed time
        END OF t_extract.
DATA: it_extract TYPE TABLE OF t_extract WITH HEADER LINE,
      it_extract2 TYPE TABLE OF t_extract WITH HEADER LINE.
DATA: it_text TYPE TABLE OF tline WITH HEADER LINE.
DATA: wa_thead type thead.
DATA: w_tdname type TDOBNAME.
DATA: L_COUNT TYPE I.
* initialization
INITIALIZATION.
gs_layout-colwidth_optimize = 'X'.
tp_print-no_print_listinfos = 'X'.
tp_print-no_coverpage = 'X'.
PERFORM set_fieldcat.
PERFORM alv_eventtab_build USING:
**    Event name     Form to execute     Event internal table
   'TOP_OF_PAGE' 'TOP_OF_PAGE'       gt_events[].
* Dropdown list for all created ALV layouts, global or user-specific
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pa_vari.
PERFORM alv_variant_f4 CHANGING pa_vari.
* Main BODY of processing logic
START-OF-SELECTION.
IF s_vbeln IS INITIAL
AND s_kunnr IS INITIAL
AND s_werks IS INITIAL
AND s_fkdat IS INITIAL
AND s_fkart IS INITIAL
AND s_vkorg IS INITIAL.
     MESSAGE i000 WITH text-037 ' ' ' ' ' '.
ELSE.
    PERFORM extract_data.
ENDIF.
END-OF-SELECTION.
IF it_extract2[] IS INITIAL.
    MESSAGE i000 WITH text-002 ' ' ' ' ' '.
ELSE.
* Build headings for report.
*    PERFORM build_top_of_page USING gt_list_top_of_page[].
* describe table it_extract2 lines l_count.
*write :/ 'TOTAL NO OF ENTRIES', SY-VLINE, 32 L_COUNT.
      PERFORM call_alv.
*write :/ 'TOTAL NO OF ENTRIES', SY-VLINE, 32 L_COUNT.
ENDIF.
*&      Form EXTRACT_KEY_DATA
* Retreive the data for the report.
FORM extract_data.
CLEAR: it_extract. REFRESH: it_extract.
* read and select billing documents
IF p_hold IS INITIAL.
    SELECT vbrk~vbeln vbrk~fkart vbrk~fkdat vbrk~netwr
           vbrk~zzflag vbrk~zzreason vbrk~zzuser
           vbrk~zz_changed_date vbrk~zz_changed_time
           vbrp~posnr vbrp~werks
      INTO CORRESPONDING FIELDS OF TABLE it_extract
      FROM vbrk INNER JOIN vbrp ON
           vbrk~vbeln = vbrp~vbeln
     WHERE vbrk~vbeln IN s_vbeln
       AND vbrk~fkart IN s_fkart
       AND vbrk~fkdat IN s_fkdat
       AND vbrk~vkorg IN s_vkorg
       AND vbrk~fksto NE 'X'
       AND vbrp~werks IN s_werks.
ELSE.
* read 'held' documents only as per selection
    SELECT vbrk~vbeln vbrk~fkart vbrk~fkdat vbrk~netwr
           vbrk~zzflag vbrk~zzreason vbrk~zzuser
           vbrk~zz_changed_date vbrk~zz_changed_time
           vbrp~posnr vbrp~werks
      INTO CORRESPONDING FIELDS OF TABLE it_extract
      FROM vbrk INNER JOIN vbrp ON
           vbrk~vbeln = vbrp~vbeln
     WHERE vbrk~vbeln IN s_vbeln
       AND vbrk~fkart IN s_fkart
       AND vbrk~fkdat IN s_fkdat
       AND vbrk~vkorg IN s_vkorg
       AND vbrk~fksto NE 'X'
       AND vbrk~zzflag = 'X'
       AND vbrp~werks IN s_werks.
ENDIF.
IF sy-subrc <> 0.
    MESSAGE i000 WITH text-002 ' ' ' ' ' '.
ENDIF.
CHECK sy-subrc = 0.
* only need first line item for this report.
SORT it_extract BY vbeln posnr.
DELETE ADJACENT DUPLICATES FROM it_extract COMPARING vbeln.
LOOP AT it_extract.
* Retrieve and select by sales order bill-to on header level
* as well as lookup bill-to customer name/description
    SELECT SINGLE kunnr FROM vbpa INTO it_extract-kunnr
     WHERE vbeln = it_extract-vbeln
       AND posnr = '000000'
       AND parvw = 'RE'.
    IF it_extract-kunnr IN s_kunnr.
      it_extract-kunnr_name1 = zcl_kna1=>get_name1( it_extract-kunnr ).
    ELSE.
      DELETE it_extract.
      CONTINUE.
    ENDIF.
* lookup billing type description
    SELECT SINGLE vtext FROM tvfkt
      INTO it_extract-vtext
     WHERE spras = sy-langu
       AND fkart = it_extract-fkart.
    IF sy-subrc <> 0.
      clear it_extract-vtext.
    ENDIF.
* lookup plant description
    SELECT SINGLE name1 FROM t001w
      INTO it_extract-werks_name1
     WHERE werks = it_extract-werks.
    IF sy-subrc <> 0.
      clear it_extract-werks_name1.
    ENDIF.
    MOVE-CORRESPONDING it_extract TO it_extract2.
    APPEND it_extract2.
   ENDLOOP.
describe table it_extract2 lines l_count.
ENDFORM.                    " EXTRACT_DATA
*&      Form SET_FIELDCAT
* Create the field catalogue.
FORM set_fieldcat .
*CLEAR W_EVENT.
*W_EVENT-FORM = SLIS_EV_AFTER_OUTPUT.
*W_EVENT-NAME = SLIS_EV_AFTER_LINE_OUTPUT.
*APPEND W_EVENT TO GT_EVENTS.
CLEAR w_field.
CLEAR t_fieldcat. REFRESH t_fieldcat.
w_field-col_pos = 1.
w_field-fieldname = 'ZZFLAG'.
w_field-tabname = 'IT_EXTRACT2'.
w_field-seltext_l = 'Hold Printing'(005).
APPEND w_field TO t_fieldcat.
w_field-col_pos = 2.
w_field-fieldname = 'ZZREASON'.
w_field-tabname = 'IT_EXTRACT2'.
w_field-seltext_l = 'Reason'(036).
APPEND w_field TO t_fieldcat.
w_field-col_pos = 3 .
w_field-fieldname = 'VBELN'.
w_field-tabname = 'IT_EXTRACT2'.
w_field-seltext_l = 'Billing Doc'(028).
w_field-emphasize = 'X'.
w_field-hotspot   = 'X'.
APPEND w_field TO t_fieldcat.
CLEAR w_field.
w_field-col_pos = 4 .
w_field-fieldname = 'VTEXT'.
w_field-tabname = 'IT_EXTRACT2'.
w_field-seltext_l = 'Type Description'(030).
APPEND w_field TO t_fieldcat.
w_field-col_pos = 5 .
w_field-fieldname = 'FKDAT'.
w_field-tabname = 'IT_EXTRACT2'.
w_field-seltext_l = 'Billing Date'(031).
APPEND w_field TO t_fieldcat.
w_field-col_pos = 6 .
w_field-fieldname = 'WERKS'.
w_field-tabname = 'IT_EXTRACT2'.
w_field-seltext_l = 'Plant'(012).
APPEND w_field TO t_fieldcat.
w_field-col_pos = 7 .
w_field-fieldname = 'WERKS_NAME1'.
w_field-tabname = 'IT_EXTRACT2'.
w_field-seltext_l = 'Plant Description'(032).
APPEND w_field TO t_fieldcat.
w_field-col_pos = 8.
w_field-fieldname = 'KUNNR'.
w_field-tabname = 'IT_EXTRACT2'.
w_field-seltext_l = 'Bill-to Customer'(033).
APPEND w_field TO t_fieldcat.
w_field-col_pos = 9 .
w_field-fieldname = 'KUNNR_NAME1'.
w_field-tabname = 'IT_EXTRACT2'.
w_field-seltext_l = 'Bill-to Description'(034).
w_field-emphasize = 'X'.
w_field-hotspot   = 'X'.
APPEND w_field TO t_fieldcat.
CLEAR w_field.
w_field-col_pos = 10 .
w_field-fieldname = 'NETWR'.
w_field-tabname = 'IT_EXTRACT2'.
w_field-seltext_l = 'Invoice Amount'(035).
APPEND w_field TO t_fieldcat.
w_field-col_pos = 11 .
w_field-fieldname = 'ZZUSER'.
w_field-tabname = 'IT_EXTRACT2'.
w_field-seltext_l = 'Changed By'.
APPEND w_field TO t_fieldcat.
w_field-col_pos = 12 .
w_field-fieldname = 'ZZ_CHANGED_DATE'.
w_field-tabname = 'IT_EXTRACT2'.
w_field-seltext_l = 'Last Changed Date'(006).
APPEND w_field TO t_fieldcat.
w_field-col_pos = 13 .
w_field-fieldname = 'ZZ_CHANGED_TIME'.
w_field-tabname = 'IT_EXTRACT2'.
w_field-seltext_l = 'Last Changed Time'(007).
APPEND w_field TO t_fieldcat.
* W_event-NAME = slis_ev_end_of_list.
* W_event-FORM = 'END_OF_LIST'.
* APPEND W_event TO GT_EVENTS.
* CLEAR W_event .
* w_field-col_pos = 14 .
* w_field-fieldname = 'COUNT'.
* w_field-tabname = 'IT_EXTRACT2'.
* w_field-seltext_l = 'COUNT'.
* APPEND w_field TO t_fieldcat.
ENDFORM.                    " SET_FIELDCAT
*&      Form CALL_ALV
* Call the ALV Grid function.
FORM call_alv .
SORT it_extract BY vbeln.
* repid is necessary since the ALV F.M. does not work properly with
* sy-repid.
repid = sy-repid.
alv_variant-variant = pa_vari.
alv_variant-report   = sy-repid.
alv_variant-username = sy-uname.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program      = repid
      i_callback_user_command = 'USER_COMMAND'
      is_layout               = gs_layout
      it_fieldcat             = t_fieldcat[]
      it_sort                 = gt_sort[]
      i_default               = 'X'
      i_save                  = 'A'
      is_variant              = alv_variant
      it_events               = gt_events[]
      is_print                = tp_print
    TABLES
      t_outtab                = it_extract2
    EXCEPTIONS
      program_error           = 1
      OTHERS                  = 2.
write :/ 'TOTAL NO OF ENTRIES', SY-VLINE, 32 L_COUNT.
IF sy-subrc NE 0.
    MESSAGE w000 WITH text-004 ' ' ' ' ' '.
ENDIF.
ENDFORM.                    " CALL_ALV
*&      Form alv_eventtab_build
*     Pass list of events to be triggered by the ALV function module
FORM alv_eventtab_build USING u_name TYPE slis_alv_event-name
                               u_form TYPE slis_alv_event-form
                               alv_lt_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.   " structure for event handling
ls_event-name = u_name.
ls_event-form = u_form.
APPEND ls_event TO alv_lt_events.
ENDFORM.                    " alv_eventtab_build
*       FORM TOP_OF_PAGE                                              *
FORM top_of_page.
*gs_list_top_of_page-type = 'H'.
GS_LIST_TOP_OF_PAGE-INFO = L_COUNT.
APPEND GS_LIST_TOP_OF_PAGE TO GT_LIST_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      i_logo             = 'NEWALTA_LOGO'
      it_list_commentary = gt_list_top_of_page.
ENDFORM.                    " TOP_OF_PAGE
*&      Form user_command
* Process the user command.
*      -->R_UCOMM      User command
*      -->RS_SELFIELD Field selected
FORM user_command USING r_ucomm     LIKE sy-ucomm
                        rs_selfield TYPE slis_selfield.
DATA: ltp_vbeln TYPE vbeln. " Sales document number.
CASE r_ucomm.
    WHEN '&IC1'.
      IF ( rs_selfield-fieldname = 'VBELN'
        OR rs_selfield-fieldname = 'BILL_VBELN' )
       AND rs_selfield-value IS NOT INITIAL.        " Display sales document.
        ltp_vbeln = rs_selfield-value.
        zcl_sales_doc=>display( ltp_vbeln ).
      ENDIF.
ENDCASE.
ENDFORM.                    "user_command
*&      Form alv_v-ariant_f4
* Get the display variant.
*      <--CTP_VARI Variant name
FORM alv_variant_f4 CHANGING ctp_vari TYPE slis_vari.
alv_variant-report   = sy-repid.             " Report ID
alv_variant-username = sy-uname.             " User ID
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant = alv_variant
      i_save     = 'A'
    IMPORTING
      es_variant = alv_variant
    EXCEPTIONS
      OTHERS     = 1.
IF sy-subrc = 0.
    ctp_vari = alv_variant-variant.
ENDIF.
ENDFORM.                    " alv_variant_f4

Present a total count of rows

Similar Messages

Maybe you are looking for