Presentation Runs but without Sound

Heres an odd one. I have a Breeze presentation which runs
fine from the C drive, but when I pop the files onto our we server
and try to launch the presentation from a http link the sound
doesn't come through.
Has anyone else come across this or am I doing something
wrong?
Any help would be greatly appreciated.

http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=cc100e10

Similar Messages

Quake 3 runs, but without sound!

Hi!
I just set up Arch 0.7 and everything seems to run well, also the sound. But when I'm starting quake3 (pointrelease 1.32b) I don't hear anything. Die log say, my sound system is muted, but I have unmuted everything with alsamixer.
I don't know what's wrong, I never had this problem with linux.
please help, regards.

last time i played q3 for a few minutes was back when arch still had linux 2.6.3 as default.
i'm quite sure the via82xx drivers did not change that much since then but as the "xx" says it's meant to work w/ a variety of cards. so it could be that mine is one of the unfortunate cases:
VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 80).
(archstats -d)
this card is the onboard one on a Asrock K7VM4 board. i have several problems w/ this card since the mixer does not work right, at least standard volumes like master and pcm do not react to my actions at all. only VIA DXS works here... :cry:

When downloading from a Sony minidisc video camera, the picture is downloading but without sound. Previously, it had downloaded successfully both sound and picture. I have subsequently upgraded to Lion X (10.7.4). Is there some problem with the driver?

When downloading from a Sony minidisc video camera, the picture is downloading but without sound. Previously, it had downloaded successfully both sound and picture. I have subsequently upgraded to Lion X (10.7.4). Is there some problem with the upgrade which is affecting the transfer? Is there a way of resolving this?

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

My videos play on my ipod but without sound! HELP!

i have converted them on itunes and they play with sound on itnues. i synced them on to my ipod fine and they play but without any audio!
Please help

Try using MPEG Streamclip to convert the videos; more information on this issue is available in this article.
(28559)

Firefox4 gets websites, but WITHOUT SOUND

I get video, but no sound from any website since installing FF4
om my HP HDX 16-1140US (64 bit) running Vista. The sound is working fine on everything else.

Check the Audio MIXER setting WHILE playing a flash video, see if the third mixer on the right is turned off. If so, set it to ON and move the volume slider up.

My iPhone 5 records Videos but without Sound!

My iPhone 5 Records Videos but without any Sound. Restart the phone does Not help! Any Ideals???

GLAD I COULD HELP!
for the key clicks try to go under settings>sounds and see if the "change woth buttons" is pushed to ON. and try to change the volume when your clicking the keyboard
if that doesnt work, then try playing a song to see if your volume is down, or if your speakers are capoot

Songs play and timer runs, but no sound?

My ipod (5th generation) starts playing a song and sounds great, but about halfway through a song it starts to sound crackly and then the sound cuts out all together. The timer for the song continues to countdown. This has happened for both the headphones jack and while playing through my car radio, when plugged into the charger jack in the bottom. I can still plug it into my computer and play songs through itunes, but nothing else. Has anyone else had this problem or know if there's a way to fix the problem? Or do I need to drop the cash to replace it?

I am going to redirect you guys to a HUGE thread that was made a few years ago and is still active today... It has to do with your problem. I will tell you now that there is no way to fix it. Here is the thread link:
http://discussions.apple.com/thread.jspa?threadID=1095417&start=0&tstart=0
This covers pretty much anything you want/need to know, but if you still have questions, come back here and post a reply. (This did happen to me, so I have been through it)

I have uptodate Firefox plus uptodate Silverlight. Netflix wil run properly in ie but not in Firefox (in firfox, runs but no sound)

see headline

Please check if all your plugins are up-to-date. To do this, go to the [http://mozilla.com/plugincheck Mozilla Plugin Check site].
Once you're there, the site will check if all your plugins have the latest versions.
If you see plugins in the list that have a yellow ''Update'' button or a red ''Update now'' button, please update these immediately.
To do so, please click each red or yellow button. Then you should see a site that allows you to download the latest version. Double-click the downloaded file to start the installation and follow the steps mentioned in the installation procedure.

New Problem - video loads, plays a bit, pauses, then plays without sound.

On the first time that I used the TV-Out feature of the iPod, videos that normally were playing properly started to lag. The video would play about 15 seconds, then stop playing for a few seconds, then start again, but without sound. I just thought it might be because of the TV-Out feature, but after that incident, a large amount of my videos have been doing this, without using the TV-Out.
My first use of the tv-out feature was around the time that I first updated the iPod firmware. I now realise that I have no need of the updated firmware, so would be willing to restore the iPod to factory settings, but would rather get some opinions first.
Although these videos had played normally before, now they (and most all videos I have added since), do this when playing:
Load up normally, play normally for about 15 seconds, pause and do nothing, then continue playing but without sound. If I use the clickwheel to skip ahead after it pauses, it will play normally for another 5 seconds or so and then pause and cut the sound again.
I had not experienced anything like this before that first time I used the TV-out capability. Nor had I experienced it before updating the iPod. Now, many, but not all of my videos are doing this.
Oh, it seems only the videos longer than 10 minutes are doing this... all the others work... some more testing would be needed to be certain. Video podcasts are playing fine. So... anyone else had this happen?

This problem seems to occur for the 60GB models that are using the new firmware 1.1. It has been posted all over google and the only fix to this problem is to downgrade to 1.0. The problem is reported as not to affect the 30GB models but there are a few videos on my ipod (30GB) that suffer from this as well. I haven't downgraded by 30GB one to check if it fixes it, but I can assure you that it will fix the problem for the 60GB one (I used to have that one before).

Sound card detected, everything checks out... but no sound.

I've been trying to get my intel digital audio working, and I'm baffled, the wikis don't have an answer for this.
Everything the wiki says checks out, but nothing will play.
[root@harpo jeremy]# lsmod | grep '^snd'
snd_seq_oss 32768 0
snd_seq_midi_event 7680 1 snd_seq_oss
snd_seq 55296 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 7956 2 snd_seq_oss,snd_seq
snd_pcm_oss 43936 0
snd_mixer_oss 16640 1 snd_pcm_oss
snd_hda_intel 332196 0
snd_pcm 81544 2 snd_pcm_oss,snd_hda_intel
snd_timer 22280 2 snd_seq,snd_pcm
snd 56808 8 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_pcm,snd_timer
snd_page_alloc 8720 2 snd_hda_intel,snd_pcm
[root@harpo jeremy]# ls -l /dev/snd
total 0
crw-rw---- 1 root audio 116, 0 2007-06-21 09:40 controlC0
crw-rw---- 1 root audio 116, 24 2007-06-21 09:40 pcmC0D0c
crw-rw---- 1 root audio 116, 16 2007-06-21 09:40 pcmC0D0p
crw-rw---- 1 root audio 116, 25 2007-06-21 09:40 pcmC0D1c
crw-rw---- 1 root audio 116, 17 2007-06-21 09:40 pcmC0D1p
crw-rw---- 1 root audio 116, 1 2007-06-21 09:40 seq
crw-rw---- 1 root audio 116, 33 2007-06-21 09:40 timer
[root@..]# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: AD198x Digital [AD198x Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
[root@..]#
As far as I can tell, all that says that it should be working, but it's not.
When I try and assign a device (I seem to have a choice between oss and alsa) and test the sound in Xorg, I get this:
audiotestsrc wave=sine freq=512 ! audioconvert ! audioresample ! gconfaudiosink: Could not open resource for writing.
aplay seems to run, but no sound comes out.
Any suggestions?

You should also make sure to add alsa to rc.conf.
If you don't do that, no matter what you mute / unmute - it may default to muted when you reboot. Unless you use alsactl to load / store your settings manually...but then that's what adding alsa to rc.conf will do for you
Hope this helps.

My recorded footage without sound will not play, but will when recorded with sound, any ideas?

Hi there community!
I have recorded alot of footage on a digital Harinezumi 3 camera and have run into a problem in post production.
Some of the footage is recorded with sound, and plays fine. However, with most of the footage, i chose to turn the recording of sound off. These files without sound will not play in any player, even when Perian is installed.
These are the specs of the video I have been able to find out.
File type: .AVI
Video Stream: JPEG
This is all I can find out, so I am thinking it is an M-JPEG file rendered as an AVI file. VLC player says it can not play the video or audio format 'undf', whatever that means. Another player says it needs a .moov encoder, but I do not see how this is possible. I have also tried attaching audio to it via Logic 9 with no success.
I am at a loss, and I really need this footage for a project. Any ideas?
Thanks for any help!!

It won't let me post the video in the forum, so here is a link to it in dropbox.
https://www.dropbox.com/s/k4nz8mg18p4thzd/Mountain%203.AVI?n=145237283
Accessed the file at dropbox. Played the DropBox "display" file in scripted player, played the same resource file using the Safari plug-in, and then downloaded the resource file using the QT 7 Pro "Open URL" option only to learn that this file was an H.264 transcode and not your original file. Used the DropBox download option to download the original Motion JPEG file in AVI file container. File plays as is in both QT X v10.2 and QT 7 v7.6.6 players under Mountain Lion v10.8.4 on my system.
Motion JPEG is one of the "lagacy" codec components turned off under Lion and which remains turned off under Mountain Lion. However, as I understand it, Motion JPEG files are supposed to be passively supported (playback supported) under these systems but requires the codec to be turned back on if you wish to export files using this codec. I turned both Motion JPEG and Motion PNG codecs back on quite a while back and have Perian installed which, as you can see, supplied the OpenDML version of the Motion JPEG codec component to actually play your file on my system. Unfortunately, since QT uses a LIFO codec component list generation strategy, I would have to remove Perian to test whether or not the system configured Motion JPEG component would then become the active decoder. (Did this a year or two ago but not willing to do so again at this time.)
Suffice it to say, the file should play in QT on your Mountain Lion system assuming the correct version of Perian is installed, it is actually active, and you have no conflicting software or hardware installed on your system. Have posted an MOV file containing your Motion JPEG video data in case you want to see if it will play correctly on your system.
http://downloads.walker4.me/downloads/Temporary_files/Mountain%203.mov

When closing FF and then try to go back on, a msg. says FF is already running, but not responding, to open new window you must first close the existing window or restart system. How do i close without restarting?

'This happens after a FF session is ended and am back on my desktop screen. If I then try to go back online a message says that FF is already running but is not responding. To open a new session you must first close the existing process or restart your system. I have to restart the computer to before it allows me to go back on. How can I close the session and then open a new one without rebooting???

Hey GreenViking,
You can kill the process manually by right clicking in the task bar (next to the time and date) and opening the task manager.
[https://support.mozilla.com/en-US/kb/Firefox%20hangs#w_firefox-hangs-when-you-quit-it This article] has some information about Firefox hanging when you try to close it.
Hope that helps!

I dropped my iPhone 4 in the sink where it was submerged in water for not even 2 seconds I took it out and put it in a warm room by the radiator and most of it works but no sound and battery length is short and runs out quickly. Any ideals on how to help?

I dropped my iPhone 4 in the sink where it was submerged in water for not even 2 seconds I took it out and put it in a warm room by the radiator and most of it works but no sound and battery length is short and runs out quickly. Any ideals on how to help?

$149
They do not repair .Apple exchange and all returned units are refurbished at The Apple plants in China
So you get a device that looks like and functions like new
Are you familiar with the results of water and electricity mixing

After updating to 12.1.2.27, songs play, but without any sound output to internal iMac speakers

So i updated to 12.1.2.27 and songs 'play', but without any sound output. Checked my audio settings and had it at Internal speakers. Checked the speakers (they work, at least for YouTube vids), restarted machine, etc and no audio output from iTunes. Any suggestions? Am I missing something?
Thanks in advance

Try unchecking Sound Enhancer and Sound Check in your Preferences under Playback
Sound check may have reduced everything to a low output level inadvertently.

Apple tv3 runs slowly on all apps in the box,after the last update.Picture sometimes runs slowly on netflix ,and all the apps in the apple tv3 box.But the sound is ok.Anyone else have this problem?

Apple tv3 runs slowly on all apps in the box,after the last update.Picture sometimes run's slowly on netflix ,and all the apps in the apple tv3 box.But the sound is ok.Anyone else have this problem?I have a 20Mbit wireless line,but i had put a cable from my router to my apple box,but it did not help.

Are you using a home network?
Try the following :
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings

Presentation Runs but without Sound

Similar Messages

Maybe you are looking for