Presento problemas con mi iPad 3 y smart cover, tiene manches de oxido, Ocampo si se hubiese quemado

Al quitarle el case, me di fue ta que tanto el case como el iPad tienen manchas negras, quizás porque se calienta

I have some troubles with my case, its look like its burn it

Similar Messages

  • So I have an iPad with the smart cover, and it's usually supposed to turn on the iPad when u open it, but it's no doing that for me. Nor is it turning off without pressing the button. What is the meaning of this?

    So I have an iPad with the smart cover, and it's usually supposed to turn on and off the iPad when u open it and close it, but it's not turning on for me. Nor is it turning off without pressing the button. What is the meaning of this?what caused it to be this way? Is there someway that I could fix it?

    Wait a sec did this just start?
    You set up the smart cover function in settings (you did that, right?) so, if you did that and it's failed you make an appointment at your nearest Genius Bar now.

  • Help with broken screen on new ipad plee I have brand new iPad when the smart cover slipped.  Any ideas on cost to replace screen as it has shattered. Thanks in advance.

    I have just dropped my brand new iPad when the smart cover slipped.  Any ideas on cost to replace screen as it has shattered. Thanks in advance.

    Flat rate $299.
    Actually, they won't replace the screen, they'll replace it.  The following is a C&P from the link that I gave you.
    "If you own an iPad that is ineligible for warranty service but is eligible for Out-of-Warranty (OOW) Service, Apple will replace your iPad with an iPad that is new or equivalent to new in both performance and reliability for the Out-of-Warranty Service fee listed below."

  • Estoy teniendo problemas con el ipad air, esta no quiere iniciarme solo se queda en la manzana, que debo hacer?

    Necesito saber que hacer con la Ipad Air ya que esta no me inicia y se queda solo en la manzanita, y es la segunda vez que me lo hace, la compre en diciembre y en menos de un mes ya me ha presentado dos veces este problema.

    I need to know what to do with the Ipad Air as this does not start me and left alone in the manzanita, and is the second time that makes me buy it in December and in less than a month has already presented me twice this problem .

  • Scratches on iPad 2 from smart cover

    I have ordered a smart cover that I should receive in a few days. I have read in a few places that the cover leaves scuff marks on the left side of the iPad. Has anyone used one and doesn't have scratches? Or should I expect and accept that the product will leave scratches?
    Thanks,
    Zach

    An update on the Smart Cover rubbing against my iPad. After the second Smart Cover started to show signs of the metal being rubbed of its hinges I took the covers and iPad to the Apple Store. None of my friends have had any problems and I haven't seen any other reports like mine. So the Apple Store was awesome, the exchanged the iPad and both Smart Covers and now I can see the difference. It looks like the first iPad might have had some slight back case anomaly or the magnets might have been misaligned which caused the rubbing. The new iPad and Smart Covers aren't hitting each out so things look good.
    Anyway, I think my iPad was a fluke (Apple Store hadn't seen any problems come in). I highly recommend the Smart Covers. I love mine and now that they attach correctly I am a very happy customer. Plus, Apple's customer support at the store was amazing as usual.
    Thanks

  • Is there a way to have my iPad Mini's Smart Cover open up to the lockscreen instead of unlocking it?

    I'm using 32gb iPad mini 1st gen, which is running iOS 8.1.2. I have a Zagg Keyboard Folio Smart Cover.
    My "lock/unlock" option in settings is on, and works just fine, but while I want my iPad to lock itself automatically I do not want it to UNlock—just turn the screen on upon opening the device.
    I DO NOT want to use a passcode to do this.
    I found a thread posted three months ago on Reddit (will link soon) which said this was possible with a "iPad cover unlock" toggle setting in "General," but I cannot find this option in my settings.
    Does anyone have any ideas? It bothers me in the most insignificant manner possible, but I would like to change it if I can.
    I fully appreciate any and all help! Thank you in advance!

    You cannot set it to unlock only. It's both or nothing.

  • Ipad sleeve with smart cover

    Hi,
    I am looking for some type of sleeve for my ipad when I travel to/from work on my motorcycle. The plan would be to have the ipad in the saddlebag, but have a bit of extra protection from vibration and such. I have a smart cover and the thin back protector installed. I would like something with some extra space to keep those on and just slide the ipad into the sleeve.
    Thanks

    I would just find a generic neoprene sleeve. Look at office supply stores or the such.

  • Still have to unlock ipad when using smart cover iOS7

    Before the update I would just open my ipad cover and it would be unlocked.  Now, randomly, my iPad will still be locked when I open it but the screen is lit up.  I think its happening when I have a notification sitting there. (i.e. "_______ Has mentioned you on Facebook" or a text message)  I've checked the setting where its supposed to unlock when opened.  Is this just some new feature?

    Hi,
    I too have this issue.
    Here is the workaround, but is tedious and depends on how many notification apps you have.
    Go Settings -> Notification Center -> Under INCLUDE ->
    For each app, disable "Show on Lock Screen"
    This will allow you to unlock using smart cover without swipe to unlock.
    Downside would be you get no alert sound when new notification comes in. Unless its unlocked. Hope they resolve this issue asap.

  • IPad mini retina smart cover

    hello - does anyone know what the difference is between older smart covers and the one which are releasing this week? Is it just colours? (Apart from adding the white one, I don't see what the difference in colours either...)

    Hi Leemrt,
    Thanks for visiting Apple Support Communities.
    See this article for tips on cleaning your Apple products:
    How to clean Apple products
    http://support.apple.com/kb/ht3226
    iPad Smart Cover and Smart Case—polyurethane
    To clean your polyurethane iPad Smart Cover / Case, first remove it from the iPad. Use a soft, slightly damp, lint-free cloth. Wipe the front of the Smart Cover / Case and the inside with a soft, lint-free cloth to remove any dirt.
    Don't use window cleaners, household cleaners, aerosol sprays, solvents, alcohol, ammonia, or abrasives to clean the polyurethane Smart Cover / Case.
    iPad Smart Cover and Smart Case—leather
    The iPad leather cover/case is made from natural aniline leather. Its appearance will change as you use it. It may acquire a patina and may change color due to the oils from your skin and direct sunlight, further enhancing the natural look.
    Cleaning the leather may affect its color. If you choose to clean the leather, first remove the cover/case from your iPad. Use a clean cloth with warm water and mild hand soap to gently clean the leather. Wipe the outside and the inside with a soft, lint-free cloth to remove any dirt. You can also use a mild cleaner along with a dry clean cloth. Mild cleaners or conditioners may help remove some stains but may also change the color of the leather.
    Keep your iPad leather cover/case away from prolonged intense sunlight, heat, and humidity. Exposure to water, oil, makeup, and dyed materials (such as denim) can stain tanned leathers.
    All the best,
    Jeremy

  • IPad Air 2 Smart Cover

    I just bought an iPad Air 2 with Smart Case but the holes in the Smart Case for lens & volume controls don't match up, off just a little. Was I sold case for orig. iPad Air!

    I meant I purchased the full smart case, not the cover. Wondering if the camera lens and volume control locations are slightly different between the original iPad Air and the iPad Air 2? The reason I'm asking is that I just purchased the Air 2 with Smart Case and the holes in the case for the camera lens and volume controls don't line up with the lens and volume controls on the Air 2. The lens us partially covered by the case and the area for the volume controls are off some as well. I'm wondering if I was accidentally sold a case for the original iPad Air?

  • Is there going to be a new cover anytime soon that protects the entire iPad which the smart cover doesnt do?

    Is there going to be a new cover released that protects the entire ipad2??

    User to user forum, no apple here.
    Speculation is against TOS.
    http://www.myincipio.com/iPad-2-Cases-Accessories/Incipio-iPad-2-Smart-feather-U ltralight-Hard-Shell-Case.asp
    Not made by apple, but sound like what you are looking for.

  • I have an iPad air with Smart Cover. The Smart Cover switches off the ipad, but when it is lifted, the lock screen appears rather than just starting again

    SSmart cover on iPad air not working as it should

    Depending on your Settings this is normal behavior. Check the Settings app as JimHdk suggested.

  • Best ways to clean iPad and leather smart cover

    Thanks for any advice

    Wilson's leather protector spray is amazing for waterproofing and strain
    Proofing.  DoesnT change color either.

  • How can a new iPad smart cover of polyurethane having moister problems

    I bought the New iPad with a smart cover, Now after 3 months one side of the smart cover is getting lose and I sent it bach to the store after investigation he said apple doesnot give any garantee becos of moister issues. How is this possible as polyurethane doesnot absorbe moister.
    What can I do?

    Yea, I know, I figured it out shortly after. I feel kinda silly now but it just seemed too easy after all the fuss with Apple support. Like I said, if they don't really know what their talking about they go off in all sorts of crazy directions. I wasn't even having Compressor issues like so many others do (told ya my computer never lets me down). Not sure what the lesson here was, Apple Care is usually pretty helpful (or atleast moreso than other tech supports), but next time I'm having trouble with anything remotely music related they will be the last ones I call.
         By the way, thanks for the reply anyway and reading my lenghty complaining. I really needed to blow off some steam after that needless ruckus.

  • My smart cover dented the side if my iPad. Will apple replace?

    Just bought the new iPad a couple weeks ago. The same day I bought a smart cover. I just noticed it has dented the side of my iPad. I'm ******. Will apple do anything about this? Has anyone else had this problem?

    D.C. Magic wrote:
    I carry it in my briefcase to and from work. Only thing I can think of is somehow it got pushed into the side because there is a noticeable dent where it connects.
    hmm... sounds like the side of the ipad where the smart cover connects were struck by something and that force carried through enough to cause the strip where the smart cover connects to your ipad to push into your ipad and dent it.
    I doubt this is covered because this is similar to saying: the smart cracked my ipad screen because something struck the smart cover while it was covering the screen and the force was enough to carry through and crack the screen.
    Guess what I'm trying to say it, even though it was the smart cover that was in contact with your ipad when it got dented, the cause is still some external force...
    But give it a shot and see if it's covered! :-)

Maybe you are looking for

  • Unable to install clean Recovery & Application/drivers on new hard drive

    My HDD failed on Satillite P25-s526. I replaced it with OEM new drive. Also upgraded the RAM from 512mb to 2GB's. I have attempted to do a full recovery of the system using DVD which came with the computer.  DVD formats partitions in new HDD, loads t

  • Calling a stylesheet from content server

    Greetings i have a webcenter application and i have uploaded all my resources (images,flash animations and stylesheets) to a content server, i am trying to use the style sheets so i am doing this <link rel="stylesheet" type="text/css" afrres="true" h

  • Customer project Settlement

    Dear All, i am working in customer projects. Actual cost and revenues r flowing.The RA key to the top WBS Element which is also billing element. I heve done the revenue based result anlaysis.Profit and loss are showing in RA. Now i want to settle the

  • Reg Blocked Export Documents Runtime Error

    Hi.. I am using the transaction '/SAPSLL/BL_DOC_SD_R3' to see blocked export documents....... Now when i run it for a plant and about 40 thousand sales orders... it is going for a runtime error..... I need to know for how many records can i run this

  • Pass a shared variable from a sub-report into cross-tab

    Hello everyone! I need to pass a calculated value in a shared variable from a sub-report into a croos-tab in the Group footer of the main report. When I place this variable in the group footer I can see the value, when I use this variable in the Cros