Preset parameter for schedule

Hi,
I have a requirement that we should allow user to run the report, system would save the report instance in pdf format in the default enterprise location, however, we should preset the settings like connection setting, format, destination, etc.. the only things to let user to do is to fill in parameters. Can we have such function that it dun allow the user to change the scheduler setting other than the parameters value?
Many thanks.
Charing

Jean,
Where is the parameter who control yhis ?
In RZ10, login/password_max_idle_productive users who are idle for 30days will be automatically locked.
2. Use TU02 -you will get to know parameters active in the SAP system.
http://sap.ittoolbox.com/groups/technical-functional/sap-security/rsparam-settings-password-1185954
Thanks,
Sri
Edited by: sri on Jul 27, 2010 8:41 PM

Similar Messages

One parameter for multiple Crystal reports in Publication

Does anyone know if it is possible to enter one identical parameter for multiple Crystal reports in publication when scheduling? BOE 3.1 SP3 Windows, Java.
To elaborate I am creating publication with multiple reports, each report has one parameter and this parameter is identical in every report in publication. So instead of entering this parameter many times I would like to enter once.
If yes point me in the right direction to get the how to or post the steps.

Daniel,
Thank you so much for your answer. It was very helpful. In the end, it didn't work but it helped me figure out what was happening. I use a different form for the reports and I had it coded in the form which report to use. I created a second form for the second crystal and then I used an if statement to choose the form and it worked like a charm.
Thanks so much again!

Configuring profile parameter for a table lock object

Hi Experts-
I want to set the 'wait time' (_WAIT) parameter as a profile parameter for a table lock object.
I have created a lock object on a ZTable. I lock and unlock this object in exclusive non-cumulative mode through the enqueue and dequeue lock object function modules. These generated FMs are invoked via my custom function module.
My function module will run in the background as a scheduled task in R/3. I execute the Enqueue FM at the start of the FM and keep the table locked until the last step finishes in my FM and then I Dequeue it. I want to have the processing wait and retry the Enqueuring FM at set intervals in case the one run doesn't finish entirely and a new run of this same job kicks off.
Thank you,
- Vik.

Set the wait parameter = 'X'. These means that if it encounters a lock, then it will wait a certain time for the lock to be released. This certain time is a system value set by your basis team. I don't imagine it being a very long time.
CALL FUNCTION 'ENQUEUE_EZPIPHYINVREF'
       EXPORTING
            MODE_ZPIPHYINVREF = 'E'
            MANDT             = SY-MANDT
            _WAIT             = 'X'.
Regards,
Rich Heilman

MRP Control Parameter Settings -Scheduling

Hi All,
         Could you please guide me to understand the following issue:
MRP control parameter setting- Scheduling has two options 1 & 2.
Option "1 " states "Basic dates will be determined for planned orders"
Option "2" states "Lead time scheduling and capacity planning"
Here is my issue-:
                   If I use option "1" what are all the DATES will be considerd to schedule planned orders ?
                   If I use option "2" what are all the DATES will be considered to schedule planned orders ?
Thanks in Advance

Hi,
Option "1 " states "Basic dates will be determined for planned orders"
The order basic dates are determined from the in-house production time in the material master and used as production dates.
Option "2" states "Lead time scheduling and capacity planning"
lead time scheduling is carried out. The production dates are calculated from the floats in the scheduling margin key of the material master and the individual operation times in the routing.
Thanks,
Rajanikanth

Query to reterive the list of parameters and there values for scheduling

I am develeoping a web application using java sdk want to reterive a parameter list for scheduling.
i want a query that will reterive the list of parameters
as we see on the parameters screen in CMC when we schedule the report.

               // Loop through the parameters to get the parameter names and parameter values.
                        for(int i=1;i<=numberPrompts;i++)
                       // Each prompt has the name SI_PROMPT + a digit starting from 1. For example, if
                       // there are 2 prompts, the first one would be called SI_PROMPT1 and the second
                       // one would be called SI_PROMPT2.
                   IProperties prompt = (IProperties)siPrompts.getProperty("SI_PROMPT"+i).getValue();
                       // Get the parameter name.
                   String promptName = prompt.getProperty("SI_NAME").getValue().toString();
                       // Start displaying a row.
                       out.println("<tr>");
                          // First column in the row is the parameter name.
                   out.println("<td>Parameter Name = "+promptName+"</td><td><table>");
                       // Get the current values property bag.
                   IProperties currentValues = (IProperties)prompt.getProperty("SI_CURRENT_VALUES").getValue();
                       // Get the number of values for this particular parameter.
                       int numberValues = ((Integer)currentValues.getProperty("SI_NUM_VALUES").getValue()).intValue();
                       // Loop through all of the values for this particular parameter.
                       for(int j=1;j<=numberValues;j++)
                           // Print out the values.
                        // Each value has the name SI_VALUE + a digit starting from 1. For example, if
                        // there are two values, then the first value would be called SI_VALUE1 and the
                        // second value would be called SI_VALUE2.
                    IProperties currentValue = (IProperties)currentValues.getProperty("SI_VALUE"+j).getValue();
                        // Check for the existence of the "SI_MIN" and "SI_MAX" properties.
                        // If it exists, then display the value.
                        if (currentValue.getProperty("SI_MIN") != null && currentValue.getProperty("SI_MAX") != null)
                                 // The SI_MIN and SI_MAX properties exist.
                            if (currentValue.getProperty("SI_MIN").getValue() != null && currentValue.getProperty("SI_MAX").getValue() != null)
                                // The properties have values.
                             // Get the SI_MIN property bag.
                             IProperties minRange = (IProperties)currentValue.getProperty("SI_MIN").getValue();
                             // To store the minimum and maximum values.
                             String minValue = "";
                             String maxValue = "";
                             // Get the SI_DATA property of the SI_MIN property bag.
                             // First verify that SI_DATA exists.
                             if (minRange.getProperty("SI_DATA") != null)
                                            // SI_DATA exists within SI_MIN
                                 if (minRange.getProperty("SI_DATA").getValue() != null)
                                     // SI_DATA has value so set the minValue to this.
                                  minValue = minRange.getProperty("SI_DATA").getValue().toString();
                         // Get the SI_MAX property bag.
                         IProperties maxRange = (IProperties)currentValue.getProperty("SI_MAX").getValue();
                         // Get the SI_DATA property of the SI_MAX property bag.
                         // First verify that SI_DATA exists.
                             if (maxRange.getProperty("SI_DATA") != null)
                                 // SI_DATA exists within SI_MAX
                                 if (maxRange.getProperty("SI_DATA").getValue() != null)
                                     // SI_DATA has value so set the maxValue to this.
                                  maxValue = maxRange.getProperty("SI_DATA").getValue().toString();
                         // Print out the Minimum and Maximum values for the parameter.
                         out.println("<tr><td>Range " + j + " Min Value " + minValue + " Max Value " + maxValue + "</td></tr>");
                            else
                                // The SI_MAX and SI_MIN properties exist, but they don't have values.
                             out.println("<tr><td>The SI_MIN and SI_MAX properties exist, but they don't have any values.</td></tr>");

Custom Attributes for Scheduled Transactions (Background Jobs)

Hi,
I am trying to fetch the custom attributes for scheduled background jobs. Since we are not using the XAcute Queries to run the automatic jobs, we can't use the AUTOBIND property for custom attributes and hence can't fetch them in the scheduled transactions. Is there any way to retrieve the attributes while scheduling a transaction ?
Thanks,
Amit Rath

Hi Amit,
a way that works: inside your transaction you can call a XML query that reads out the property list for a given user. In the URL of the XML query you can add the user by using the IllumLoginName parameter.
- create a XML query with the following URL:
http://<server>:<port>/XMII/PropertyAccessServlet?mode=list&Content-Type=text/xml&IllumLoginName=<User>&IllumLoginPassword=<Password>
- in your transaction, call the query. You can retrieve the value of the attribute with a XPath expression like this:
XML_propertyAccessServlet_0.Results{/Rowsets/Rowset/Row[Name='MyAttribute']/Value}
Interestingly, adding a User / Password in the Scheduler Editor of the job does not work (MII 12.0.2). Maybe this would be also an option for you to try.
Michael
Edited by: Michael Otto on Nov 9, 2010 8:27 AM

MRP To Generate SCHEDULE LINES for Scheduling Agreement

Hi
I have followed the below steps but still the Schedule lines is not generated for scheduling agreement.
1Maintain MRP views 1,2,3,4 for the material in material mste.(MM01)
2. Maintain Purchase Info Record for the vendor plant & material combination.(ME11)
3. Create Scheduling agreement using ME31L
4. Maintain source list for the material & the scheduling agreement # and Line item set the MRP relevant indicator 2 (Necessary ?) ME01
During Run MRP for the material.the below details entered///
Processing key NETCH Net Change in Total Horizon
Create purchase req. 1 Purchase requisitions in opening period
Schedule lines 3 Schedule lines
Create MRP list 1 MRP list
Planning mode 1 Determination of Basic Dates for Planned
Run MDBT or MD02 but still doesn't create the schedule lines......Anything else missing.
MRP1:
MRP Procedure: PD
MRP Group: 0000 (External Procurement only)
Lot Size: EX (Lot For Lot)
MRP2:
Procurement Type: F
Sched Margin Key: 000
MRP3:
Avilablity chec: 02 (Individual requirement)
MRP: 4
Nil

Raj,
Source List a Mandatory for Scheduling Agreement, if you want to create automatic Scheduling line.
Plz use (2) in MRP RELEVENT tab in ME01 (Source List).
rest of the thing is ok, make sure a material master(MRP 2 VIEW) in that view you have to give a planed delivery days. it is must.
HOPE IT WILL WORK
Regards:
Poision

How set and get parameter for a session of a portlet (Java)

I would like get parameter and set parameter for a portlet in portal 9.02. This parameter must be availbale during the session of the portal.
With Java Servlet
// I retrieve my session
HttpServletRequest httpreq = (HttpServletRequest)req;
HttpServletResponse httpresp = (HttpServletResponse)resp;
HttpSession session = httpreq.getSession();
//And after i can get or set some parameter for this servlet
//Example
session.setAttribute("MyEmployeeNumber","600000");
String id = (String)session.getAttribute("MyEmployeeNumber");
// But with Portlet in portal, i can't do it.
PortletRenderRequest pr= (PortletRenderRequest)httpreq.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
String sUser=pr.getUser().getName();
ProviderSession session=pr.getSession();
// But after if i want get or set a value in this session i have a internal error 500
session.setAttribute("MyEmployeeNumber","600000");
I would like my parameter is avalaible during a session for a user in each page of the portal, because my portlet is on each page.

I have almost the same problem. I tried as you suggested, but it doesn't work yet.
provider.xml
<session>true</session>
<passAllUrlParams>true</passAllUrlParams>
My code in my jsp-portlet is
<%@page contentType="text/html; charset=windows-1252"
import="oracle.portal.provider.v2.render.PortletRenderRequest"
import="oracle.portal.provider.v2.render.PortletRendererUtil"
import="oracle.portal.provider.v2.http.HttpCommonConstants"
import="oracle.portal.provider.v2.ParameterDefinition"
import="oracle.portal.provider.v2.render.http.HttpPortletRendererUtil"
%>
<%@page session="true"%>
<%
PortletRenderRequest pReq = (PortletRenderRequest)request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
String valueSession = (String)pReq.getAttribute("sesion");
if (valueSession != null) {
pReq.setAttribute("session", "value1");
out.println("<br>(1)valueSession != null");
out.println("<br>(1)valueSession : " + pReq.getAttribute("session"));
} else {
pReq.setAttribute("session", "value2");
out.println("<br>(2)valueSession == null");
out.println("<br>(2)valueSession : " + pReq.getAttribute("session"));
%>
And i always get as result:
(2)valueSession == null
(2)valueSession : value2
Even when i send values (post) at the same page or browsing between tabs:
I check my provider registration and it has the value "once per session"
I have portal 9.0.2.2.14
Thanks

Exit for role determination via exit for scheduling agreement and contract?

Hi..
I have a requirement to fetch the agents in run-time for PO,PR,SCHEDULE AGREEMENT, CONTRACT..
For PO i am using EXIT : - M06E0005
For PR release i am using EXIT :- M06B0001
By using above 2 exits i am getting the agents at run-time...
Same way i need the EXIT for SCHEDULE AGREEMENT and CONTRACT..
if there is any EXIT for this please share with me..
Regards,
Imtiaz Khan

Hi Imtiaz,
Ideally you should have your agent determination logic in workflow itself instead of determinining them in EXIT.
Can you tell me why you are determining agents in exit and how you are making use of it ?
Also let us know how your workflows are getting trigger for all these documents.
Regards,
Ibrahim

Parameter for Current Month and Previous Month

I'm trying to create a parameter for current month and previous month based on the ex_date, but not sure what i'm doing wrong.
where ex_date = @SelectDate
I created a second dataset below for the values in the parameters.
SELECT Month(CURRENT_TIMESTAMP) AS 'Month', 'Current Month' as 'Current Month'
union all
SELECT Month(CURRENT_TIMESTAMP)-1 AS Month, 'Previous Month' as 'Previous Month'
Results
Month Current Month
3 Current Month
2 Previous Month
Once I preview it I get "Conversion failed when converting date and/ or time from character string" I changed the data type to "date/Time" but that did not make a difference. The date is convert (varchar(10), ex_date, 101) so looks like
11/12/2014.
I've also tried expressions like =month(now()) to pull current month with same error so i'm not sure what i'm doing wrong. Any ideas?

i tired this real simple report
in the first dataset - my main report query - select name from sysdatabases where month(crdate())=@month
in the second dataset - select month(getdate()) as Month1
in the parameters - choose int data type and available values - select the second data set
in the first data set- add this parameter..( i am assumming you know this, since you have done)
in the preview you should get the drop down with current month number - 3
and if you run the report, it will display the database names that were created in march. remember we are no checking year, so will get all that were created in march across the years.
Hope it Helps!!
I'm looking to have the dropdown say "Previous Month" and "Current Month" as a option. I know how to get the information in SQL, but not sure how this translates or put into a parameter.
Current Month
list_date BETWEEN
DATEADD(MONTH, DATEDIFF(MONTH, 0, GETDATE()), 0)
AND
DATEADD(MONTH, DATEDIFF(MONTH, 0, GETDATE()) + 1, 0)
Previous Month
list_date between
CONVERT(varchar,dateadd(d,-(day(dateadd(m,-1,getdate()-2))),dateadd(m,-1,getdate()-1)),106) /* Last Month */
and
CONVERT(varchar,dateadd(d,-(day(getdate())),getdate()),106)

Release strategy for Schedule lines in SD

Hello All
Can we create a release strategy for Schedule Lines in Scheduling Agreement? If Yes How?
I have already maintained a release strategy for Item Level... which I want to put it for Schedule line as well....
Thanks in advance.

Hello,
I think you are in the wrong forum. Please choose the right forum category and post it there.
Matthias

Delivery Schedule for Scheduling Agreement

Hi Gurus,
Can I do GR for scheduling agreement(with delivery schedule) if the GR is earlier than delivery date? What should I do to be able to do so?
Thank you very much

Hi
'Propose all Items" is ticked so that MIGO proposes all the items irrespective of the delivery date and quantity. This means that even if the delivery date has not yet been reached or the complete qty has been received, the system will still allow you to do the GR.
Hope this clarifies.
Thanks

RE: Firming for Schedule Lines

Hi MM Gurus,
I have posted this question to ERP Manufacturing (PP) forum as I thought this is related to MRP settings.
I am working with MRP creating schedule lines automatically, I need way to have firming indicator for the schedule lines that created out of MRP. I have checked the forums and did some research, all mentioned about the time zones
Firm zone (zone 1) - Firmed
Trade-off zone (zone 2) - Semi Firmed
Planning zone (zone 3) - Forecast
But checking my Scheduling Agreement, ITEM > MORE FUNCTIONS > ADDITIONAL DATA, in the scheduling control portion the FIRM ZONE field and TRADE OFF ZONE field are not modifiable. I have changed SA-->Define document type for SA type to ensure that the indicator for scheduling agreement release documentation is ON. And defined the scheduling control field as optional, but still the FIELDS are grayed out/unmodifiable.
Is there any other configuration change I need to do in order to activate this?
Thanks,
Richard

I think below link clearly explain your scenario have a look at it,
[Firming the schedule lines from MRP|http://forums.sdn.sap.com/thread.jspa?messageID=9492313#9492313]

Firming for Schedule Lines

Hi Everyone,
I am working with MRP creating schedule lines automatically, I need way to have firming indicator for the schedule lines that created out of MRP. I have checked the forums and did some research, all mentioned about the time zones
Firm zone (zone 1) - Firmed
Trade-off zone (zone 2) - Semi Firmed
Planning zone (zone 3) - Forecast
But checking my Scheduling Agreement, ITEM > MORE FUNCTIONS > ADDITIONAL DATA, in the scheduling control portion the FIRM ZONE field and TRADE OFF ZONE field are not modifiable. Can you let me know if there's any other way where I can update this?
Thanks in advance,

Hi, In the config SA-->Define document type for your SA type ensure that the indicator for scheduling agreement release documentation is ON.
The fields relevant for the doc.type are specified by the entry in the 'Fleld selection' field. (like LPA or LPL).
Go to Define screen layout at document level.For the Field selection as above choose Scheduling control and double click on the above.
I can only guess that as you are using a customised SA type, the entry is selected as 'Display' for the fields for a custom Field selection again(NOT EQ LPA or LPL).
If yes, you can make it optional or Required.
See if this sorts out your issue.
Although it looks like a ordinary field control change, am not sure what impact inconsistencies/changes like this would bring.
Better to check with MM consultants before making use of the changes.
LP vs LPA: With LP the schedule lines are instantly transferred to vendor. With LPA you have the option to use a creation profile etc to transmit the data in your preferred time bucket at a later stage and then transmit it and not instantly like LP.

Schedule lines for schedule agreement

Hi,
I need get all schedule lines for schedule agreement (all schedule lines = all visible in tab analysis u2013 all lines for all forecast dlv. sched).
I check table VBEP and VBEH and I canu2019t find all items.
Could you help?
Thanks in advance,
E

Hi Manju,
For this you need to set creation indoactor for planning run in SPRO.
The path is spro-MM-CBP-Carry out overall maintenance of plant parameters-Click on maintain-give your plant-click on external procurement under planning run-here you can give your option for the schedule line creation.
Traction code is omi8. Hope this will help you.
Cheers
Ravi

Preset parameter for schedule

Similar Messages

Maybe you are looking for