Safari no longer works after the 10.5.3 Update.

I'm apparently having the same problem with Safari that I've noticed many other people on here are having.
When I try to open Safari after having installed the 10.5.3 Update it goes straight to "Application Not Responding" and I have to force it to quit.
So I figured a fresh Safari 3.1.1. install would do the trick. However, when I try to install that it tells me "You cannot install Safari on this volume. This update requires Mac OS X 10.5.2 or newer." at the select a destination step.
I haven't been able to solve my problem through the things I read in any of the other similar threads. Help?

MacSavage wrote:
I cannot create a new thread on this forum in Safari, however. It works in Firefox, but in Safari there is no button (link) to create a new thread.
*Hi M'S', Welcome* to Apple's Users Help Users Forums.
A bit of a puzzler there. The button to create a new thread is *not in Safari, it's on the forum page.* (Not the Categories page, a bunch of folders, a level too far back.)
Good Luck, JP

Similar Messages

  • We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

    We recently updated to Lion, prior to this update we could plug in our Sony Mini DV camera using the appropriate firewire and the iMovie would recognize the camera. This function no longer works after the update to Lion. Any suggestions?

    Zap the PRAM and Reset the SMC, then try again.

  • Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?

    Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?
    Ron Bell
    [email protected]

    Mozilla, like many other software companies, thoroughly test their software before releasing it to the public and I'm sure that no problem you are having is intentional.
    I do not work for Mozilla but I do have experience of releasing software for public usage.
    Firefox has no way of knowing what other software is already on your computer and with millions of combinations it isn't always possible to test for every scenario.
    You can go back to the old version of Firefox but that won't always solve your problem.
    The web site below tells you how:
    https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox

  • Internet sharing no longer works after Lion 10.7.4 update

    Internet sharing no longer works after Lion 10.7.4 update. Hopefully Apple will fix this shortly. Little excuse for this kind of screw-up.

    so here is da answer
    1. go to finder>(computer name)>macintosh HD>library>preferences
    2. copy the entire systemconfiguration folder and systemconfiguration.old folder to your desktop
    3. restart mac and device which you share intenet to
    then you have internet that is about 3x slower than the da 10.7.3 intenet sharing, but works
    then, just wait for apple to release da 10.7.4 fixed
    please use da steps!

  • Why did AME stop working after the last Windows 7 update

    AME suddenly stopped working after the last Windows 7 update. After the initial splash screen, I get a message saying that AME is not working and the program will be closed. Then I get the windows message that it is searching for a solution, then nothing. I am using the Production CS6. This happens whether I try to start AME directly, or queuing through Premiere Pro. I have tried reinstalling the entire package and have implemented all available updates from Adobe. I have no clue why this happened, but AME is crucial to my workflow.

    Try to delete the following folders and then launch AME:
    %AppData%\Adobe\Adobe Media Encoder
    %AppData%\Adobe\Common
    Make sure to first make a backup of those folders.

  • HT202157 Apple TV No Longer Works after the most recent update (2.1.13)

    Why can I no longer access the movies and tv shows I’ve already purchased in iTunes after the update?  It was not until the most recent update as on 2/1/13 that I started having this issue.  Please correct this so I can use what I paid for.  Thanks

    Same problem here, Apple, I'm pretty upset at the moment.  My daughter's 12th birthday, and she wants to watch a movie we purchased through your software.
    We love the normal apple usage...but, since your hardware and software are so stringently ruled...I have some expectations on the fact that it will actually work after the updates.
    Customer service outside the apple store has been suspect for some time. 
    Please step up here, we've invested quite a lot in you, and we're feeling a bit let down at the moment.
    No notice, no warnings, for all the messages you do send out, "hey the stuff you bought from us and can only play it back on us isn't going to be working for a while"...would be nice.
    Or just fix it.
    Scott West

  • Lighting cables and adapters are not working after the last iOS 7 update.

    Looking for some help from Apple here. After the last iOS 7 update, some of my lightning cables and adapters have stopped working.
    I have an iPhone 5 funning iOS 7.0.2.
    I have a car charger/FM RF transmitter that has worked like a charm for years. Because none of these have been made with a lighting connector, I've had a genuine Apple adapter on it since I bought my iPhone 5 a year ago. Never had a problem until the last iOS update. Now when I plug it in, not connection is registered. I've verified the charger is working by removing the adapter and plugging the old iPhone connecting into an iPhone 4 running iOS 6. I've also verified the adapter is working by plugging the charger with adapter into an iPad mini running iOS 6.
    I also have a Belkin USB car charger. This came with a black lighting cable. Also worked like a charm until the last update. Now, half the file when I plug it in, no conncetion is registered. The other half of the time, it says this cable is not supported but does not connect my phone or charge it. I've also verified that the cable is working by plugging it into an iPad mini running iOS 6.

    I had the same bug. Powering off the phone and back on resolved the issue

  • My car dock is no longer working after iOS 4.3.2 update...help!!

    I have an after market car dock that normally plays music through my car speakers and charges my iphone. After the most recent iOS update it still charges but does not play music. Any ideas?

    Sometimes after iOS updates older tech or even off brand tech may not be supported. I use an older Griffin car charger with an iPhone & iPad and it won't charge because it is not supported. Maybe get a new dock or an Apple approved product, it kinda irritates me as well not being able to use off brand tech. Its cheaper than brand name products...
    Hope this helped

  • DVR Search Option No Longer Works - After The Crap Upgrade

    The new software upgrade is crap. DVR search option no longer works. I can't use the search option to find my favorite programs and set the DVR to record them. It only lets me put the first letter in the search field and then nothing. I can't enter any more letters aftet that.
    Verizon sent me another DVR but it has same issues. They sent a technician to my house and he basically told me, the upgrade is crap and lots of people are having technical issues.
    He gave me another box and said it is working. Now I have three DVRs sitting in my house and I have to return two. After he left I tried to search and I have the same exact issue so basically he just lied and didn't fix anything.
    I called tech support over and over, and they just told me that they can't do anything. They basicaly admitted that the upgrade is crap and the are clueless on how to fix it. So I'm stock with 3 DVRs that don't work. Billing department told me they can't give me any discounts either.
    Anyone else is having these issues?

    Same issue here.  Sent me another box, same model as the old one.  Same exact issues.  Called Tech support back, they admitted it was a known issue, and nothing he could do about it.  Was told I had to talk to someone in SALES to get them to send me a newer box.
    New box is here, and now i have no option to record.  Oh, and last time I called tech support... I got 'disconnected' (after being on hold for 30+ minutes).  They are really dropping the ball, and I will not be renewing.

  • Safari no longer works after iOS 8.2 update.

    I installed the iOS 8.2 update and Safari will not work at all.  If I tap a bookmark, it just freezes.  If I manually enter a search term or a url it doesn't respond at all.  I read about some other (not the same) issues with Safari and the common advice was to restore from an iCloud backup, which I have done, to no avail.  Anyone else having the same issue?  Anyone else able to RESOLVE the same issue, and if so, HOW??

    Do this and it should be back up and running.
    1. Backup your iphone to itunes.
    2. Then unplug the iphone from the computer and turn off your iphone
    3. Hold the home button (while the iphone is off) and plug the iphone back to the computer
    4. Restore the iphone using itunes via recovery mode (this will install a fresh set of firmware on your iphone)
    5. Put your files back on your iphone and that will work

  • Safari No Longer Works After Installation

    I recently installed Mac OS X Snow Leopard 10.6.3. and then downloaded the update to 10.6.6. However, ever since installing Snow Leopard my Safari doesn't work. Each time I click on Safari it gives me the following message: You can't use this version of the application Safari with this version of Mac OS X You have Safari 5.0.3. What should I do in this case? I thought as part of updating to Snow Leopard my Safari should have also updated along with everything else??? Currently I am only able to access the Internet via Firefox, but my main preference is using Safari. Thanks!

    Hi Vanessa
    I thought as part of updating to Snow Leopard my Safari should have also updated along with everything else???
    It should have done, yes.
    Are you opening Safari from the /Applications/ folder, rather than the dock ? - if not, try that.
    If that doesn't work either, select the safari app that's in /Applications/ & do Finder-File-Get Info to see the version number shown. What is it ?
    Or just try the Safari 5.0.3 installer direct from http://www.apple.com/safari/download/ which should update the Safari in Applications, which is the place to keep Safari.

  • Volume and Eject Keys No Longer Work After Boot Camp 2.1 Update

    Earlier this evening I allowed the Apple Software Update app in Windows to update Boot Camp to version 2.1. I allowed the computer to restart following a successful installation of the update. I've restarted two more times since then. Ever since the update (including before the computer restarted for the first time following the update), the volume and eject keys on my keyboard don't work. I also have an Apple Wireless Keyboard (one of the 2003-2007 era white/clear ones) and it exhibits the same problem. Both keyboards otherwise work fine. The computer also otherwise works fine, and there's no evidence of any driver problems.
    Some other potentially relevant information:
    1- The Boot Camp icon is no longer present in the Windows System Tray.
    2- The Boot Camp Control Panel is still present in the Windows Control Panel and it works fine.
    3- All settings in the Boot Camp Control panel are unchanged from their defaults. In particular, I have confirmed that "Use all F1, F2, etc. keys as standard function keys" is still unchecked.
    4- The Windows Device Manager properly recognizes both keyboards as Apple Keyboards.
    I'm using Windows Vista Ultimate on an early 2008 MacBook; system specs are in my signature. Any ideas?
    Thanks for taking the time to read this, and double-thanks if you can respond with any suggestions!

    Ah, the joy of working with computers...:( Apparently, from my woes with the same problem, the Apple Keyboard Manager is rightfully entered into the Run directory in the Windows registry at HKLM/Microsoft/Windows/Current Version/Run.
    Why it doesn't start I still have to find out, but this may be because I have Parallels Workstatio installed as well and switch back between a virtualized Windows and a Bootcamp Windows. However, after installing Bootcamp 2.1 first and then SP3 IN THE BOOTCAMP ENVIRONMENT everything seems to work, except the Energy Options taskbar icon and Apple Keyboard Manager.
    Will keep you posted on any progress I make.
    Apple Support, BTW, was absolutely abysmal, with them even refusing to accept the ticket at all, on the grounds that they have no knowledge about Windows. Apple, get your support fixed!

  • Gmail no longer works after iOS 6.1.3 update

    I just updated my iPad 3 to iOS 6.1.3 and immediately noticed that when I tried to open the mail client, it would launch and shut off.  Turns out that I had to delete all of my gmail accounts and then the mail client worked.  I tried to add the gmail accounts back but now I get the following error:
    The IMAP server "imap.gmail.com" is not responding. Check your network connection and that you entered the correct information in the "Incoming Mail Server" field.
    The strange part is that I also updated my iPhone 5 and everything works fine, including gmail!  I check the setting between the two devices and they are the same.
    Apparently, many have reported these types of issues over the past few days.  However, I've yet to see a solution.  Apple hasn't seemed to have responded at all.

    JimHdk,
    Not sure what the issue is...like I said, my iPhone works fine with the 6.1.3 upgrade, the iPad doesn't...only after the updgrade.  Additionally, other's have reported the same issue with gmail.
    https://www.google.com/#hl=en&sclient=psy-ab&q=ios+6.1.3+gmail&oq=ios+6.1.3+gmai l&gs_l=hp.3...626.4887.0.5057.15.15.0.0.0.0.232.1902.4j10j1.15.0...0.0...1c.1.7. psy-ab.O_GfIONYv3U&pbx=1&bav=on.2,or.r_qf.&bvm=bv.44158598,d.dmg&fp=a4b1ae1098b9 eca0&biw=1486&bih=683

  • Wireless printing no longer working after installing HP 2.7 update

    I have been using wireless printing from my Macbook Pro (running Lion OSx 10.7.2) fine until yesterday when it just stopped working out of nowhere. From looking on the forums it appears that this is probably a result of the HP 2.7 update (which I also had the issue of continuously re-appearing in my software update list even after installing it multiple times - though i was able to resolve this courtesy of this forum). I've tried re-installing the printer multiple times and it works fine when connected via USB, it acnowledges that the printer is connected to the same wireless network as my computer bu

    OK, before you dive any more into the registry, a simple question. Did you try uninstalling iTunes, rebooting, and re-installing iTunes?
    I do have an entry for 'iTunes.Application.1' (below). However, I'm sure there are many more registry entries related to iTunes. In other words, adding this entry will probably not be sufficient to restore the COM functionality.
    Windows Registry Editor Version 5.00
    [HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}]
    @="iTunes Class"
    "AppID"="{F98206B5-F052-4965-9FA0-85F61BC3C19D}"
    [HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}LocalServer32]
    @=""C:\Program Files\iTunes\iTunes.exe""
    [HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}ProgID]
    @="iTunes.Application.1"
    [HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}TypeLib]
    @="{9E93C96F-CF0D-43f6-8BA8-B807A3370712}"
    [HKEYCLASSESROOTCLSID{DC0C2640-1415-4644-875C-6F4D769839BA}VersionIndependentProgID]
    @="iTunes.Application"

  • Develop Module is not working after the latest 5.5 update.

    I have uninstalled and installed from the direct link.
    Cleaned up and optimized the catalog, etc.
    Images are visible in the library and develop module, but if I try to start editing - there are no changes visible, unless I go to Library and back to Develop.
    If I click "before/after" the blank screen appears.
    Help! This is a major work issue for me!

    Ok, I'm back!
    - apply develop settings (via preset), if so: is it a custom preset?
    I did apply a special preset (custom), just recently. Right now, uploading images without. Will see if that makes any difference. (Update) - NO difference. 
    - apply metadata
    Copyright and Creator, but has done so for a while
    - apply keywords
    Yes. Always
    - rename files
    No.
    Does Develop misbehave in the same way for all your images, or is it for a subset of the images? (Do you have any jpegs in your catalog? If so, does develop work for them?)
    Do have some JPG, but generally all raw and it misbehaves with them all.
    Have you tried making changes in Develop with the image zoomed in to 1:1? If so, is the behavior still the same?
    Yes. At different zoom levels. Same problem.
    Have you tried removing the *Previews.lrdata package that sits next to the catalog? Would need to do this while Lr is not running. (This will cause the need to regenerate previews, which can impact performance for a while.)
    Mmmmm... I removed a bunch of things last time, maybe it was part of it... Can't find it right now. Where would it be?
    Have you tried purging the Camera Raw cache, in the 'Camera Raw Cache Settings' of the 'File Handling' tab in the preferences?
    Yes. No change.

Maybe you are looking for