Prevent IC user drag table borders in Assignment

How can I prevent that an incopy user is able to 'drag' table borders within an assignment/?
I want the user to edit table text and figures but not to edit the layout/size of the table cells.

To prevent ctrl-c /v /x modify the InputMap (and ActionMap) associated with the JTable.
Look at SwingUtilities.getUIActionMap(...), SwingUtilities.getUIInputMap(...)
InputMap map = SwingUtilities.getUIInputMap(myTable,1);
mapi.remove(KeyStroke.getKeyStroke(KeyEvent.VK_C,InputEvent.CTRL_MASK ));This code remove the ctrl-c for the specified component (myTable).
I hope this helps,
Denis

Similar Messages

SAP USERS ROLE TABLE

Can some one tell me the SAP USERS ROLE TABLE
I Will assign point to any input.
Balance Roll forward
Change Vendor Line Items
Change Parked Vendor Document
Change/ Reverse Vendor Invoice
Check Processing
Clear Accounts Payable Items
Display A/P Balance & Items
Display Checks
Display Vendor Documents
Display A/P Master Data
Display Parked Vendor Documents
Account Payable Interest Calculation
A/P Invoice Entry
A/P Accounting Key Reports
Manual Payment
Payments Using Bill of Exchange     Display
Payment Run Parameters
Create and Process Payment Run Proposal
Accounts payable period closing
Post Parked Vendor Document
Maintenance of Accounts Payable Master Data
Process Withholding Tax

go to t code PFCG
Search for roles with SAP_FI_AP*
You could always create your own role.
In the Menu tab add the t codes you have specified.
You will then need to add the authorization objects in the authorization tabs.
For the t codes you have I guess it would take an hour max.

Prevent multiple users from editing/approving the same form SPD 2013,SP 2013

Hello all, I have a workflow with a to do task, the task is assigned to a group so any of the users in that group can go in and do a quality check on form data and approve it. How do I prevent multiple users from working on the
same form? do I just require check out? or is there a way to notify the rest of the group that a user has already started the quality check.

The "Require Checkout" option is your best bet. You can also enable the auto checkout on edit option to allow minimal effort on the side of the user. Other users will then get the error message stating the item is checked out, if they try to
edit it.
If you'd like, you could add a workflow to the task list that triggers when something is changed. That workflow can check if the item is checked out and if so, email the other users assigned to the task.
I trust that answers your question...
Thanks
C
|
RSS |
http://crayveon.com/blog |
SharePoint Scripts | Twitter |
Google+ | LinkedIn |
Facebook | Quix Utilities for SharePoint

Error creating user defined tables: Ref count (-1120)

Hi all !
I have to create user defined tables per code, so I wrote 2 main functions, first to create a table (with TableName,TableType and TableDescription properties)and and second to add fields (to a certain table which is sent as parameter).
I call these functions to create multiple tables. For the first 6 tables it works totally ok. But beginning from the 7th table it gives that "Ref count for this object is higher then 0. " (-1120) error. All parameters are ok just as the first 6 tables.
Found such an explanation like below in help files.
The DI API allows only one instance of a meta data object at a time. This maintains data integrity by preventing any manipulation of a business object while modifying the object's user fields. Therefore, verify that no other DI object is active except the meta data object.
But why do I get such an error after sixth call of the function (but not beginning from the second table )?

Gül,
Have you tried doing some grbage collection?
Search for a topic: "Add Usertables and Fields while having a recordset"
HTH
Juha

How to prevent the user to click on the All+ book selector

We are trying to implement a simple book structure. I have created the hierarchy, assigned users to each level and assigned the opt records to each book level.
When 'listing' all items for a user, I can see whatever opts are assigned to that (his) book.
Now, if the user clicks on the +All in the book selector, he would be able to see all the records...
Pls. is there a way to prevent the user from clicking in this selector ?
Txs. for any help.
Antonio

Hi Bob,
Txs. for the hint... Well I think it is OK to use the 'profile' access once the user clicks in the All+.
Now, I have Accounts and Opportunities with the same access in the profile. User has a default book MMM for Application. I understand this book would be the default for all objects... correct ?
When in Opportunities, it is working fine.. Default to MMM and if lookup selector is used with Alll+ he can see records with the profile access.
Trouble is that with Accounts, Default to MMM and see nothing (which would be OK)... clicking in the All+ still see nothing... and this I cannot understand.
Pls. anywhere I should look ?
Txs.
Antonio

Item Code Auto Generation Based on User defined Tables

I need the Item code like
PRODUCT TYPE-ITEMGROUP-ITEMCODE-SUBITEM-BRAND-COLOR e.g .FG-01-01-00-001-00.
I created the following User define Tables and link to Item Master data
U_PRO             - FOR PRODUCT TYPE
U_GROUP        - FOR ITEM GROUP
U_ITEMCODE    - FOR ITEMCODE
U_SUBITEM       - FOR SUB ITEM
U_BRD              - FOR BRAND NAME
U_COLOR         - FOR COLOR
i need a formatted search in Item code to fetch the codes from the user defined table
i tried with the following
SELECT T5.[Code]'-'T2.[Code]'-'T3.[Code]'-'T4.[Code]'-'T0.[Code]'-'T1.[Code] FROM [dbo].[@BRD] T0 , [dbo].[@COLOR] T1, [dbo].[@GROUP] T2, [dbo].[@ITEMCODE] T3, [dbo].[@SUBITEM] T4, [dbo].[@PRO] T5 INNER JOIN OITM T6 ON T5.Code = T6.U_PRO WHERE
T5.[Code] = T6.[$U_PRO] AND
T2.[Code] = T6.[$ U_GROUP] AND
T3.[Code] = T6.[$U_ITEMCODE] AND
T4.[Code] = T6.[$U_SUBITEM] AND
T0.[Code] = T6.[$U_BRD] AND
T1.[Code] = T6.[$U_COLOR]
showing errors. Can any one help me regarding this. I badly need the query for Auto generation of Itemcode

Hi,
How can you assign those UDF value without ItemCode in the first place?
Thanks,
Gordon

Prevent a user from changing the Project ID in P6 EPPM 8.3.7

Does anyone know if there is a Global or Project Security Profile privilege that will prevent a user from changing the Project ID on an existing Project? We are using Primavera P6 EPPM 8.3.7
Thank you,
Eric

Hi,
Below project security profile may help you,
Edit Project Details Except Costs/Financials
Determines whether the profile will enable users to edit fields in General, Dates, Defaults, Resources, and Settings tabs in Project Details. To assign a project baselines, users must also have the "Assign Project Baselines" project privilege assigned to their profile.
Regards,
Marcos

Another user-modified table 'Activities' (OCLG) (ODBC-2039) [Message 131-18

Hello,
Iu2019m having problems re-assigning some activities. When i make a slight alteration to an existing activity I added my note and reassigned the activity to another user to raise collection but it is coming up with the red message when I click on update which reads as follows:
'Another user-modified table 'Activities' (OCLG) (ODBC-2039) [Message 131-18]'
Could you please assist.
Regards,
Juan

Gordon,
I have tried disconnecting the AddOns to no avail. There are a few stored procedures but none that I can see attribute to the actitivity screen.
I have tried this on a test company and there is no issue. I have ensured no one else is logged into SAP but the same message appears. Having investigated further it is now only happening for one activity in particular. Other 'Open' activities are fine. Newly created Activities can also be edited.
Any other ideas?
Regards,
Juan

User defined table usage

Dear Experts,
I would appriciate your advice on the sales budget screen that I am currently woking on.
the screen contains a matrix with a cfl on the product group column and a couple of columns stand for sale figures for each month.
this screen will be called form the BP form. so i would pass the selected BP code to my form.
I am not sure whether a user defined table is the answer to this job.
if i add productGroup,productCode,cardcode,Jan,Feb, ... user defined fields to this table then the system will add Code and Name fields automatically to this table, if the userdeined table is the right way to go for this job, what values i should held for the code and name fields considering both of these fields are stand alone primary key fields.
Many thanks.
Maryam.

I usually load the same value into both fields, but since the code field is only eight bytes its kind of limiting. If you don't have any information to load in the table that would be unique, like a date or year field, (or your product code if its less than 9 bytes & will be unique) then a sequential number works fine. There are threads on this forum that show different ways to do it, but one way is basically to select max(code) from the table, convert the value to numeric, add one to it and then use it as the value for both fields.
Here's a link to a thread I posted with some code on the specifics of assigning the next sequential number as code and name:
[Re: Unique Value in Code and Name]
Edited by: John Chadwick on Sep 18, 2009 2:53 PM

I would like to prevent any user including admins from modifying a stored procedure

I would like to prevent any user including admins (apart from myself) from modifying a stored procedure.
I cant use encryption because i need people to be able to read the code, I cant use trigger because we arent able to add triggers to system tables.
Any ideas?

You cannot prevent from the logins who are members of sysadmin role to modify stored procedures.
If you DENY ALTER SCHEMA then the user won't be able to issue any DDL changes (CREATE, ALTER, DROP) that affect objects in that schema
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

OIM 11g, Get users from table and insert them into Approval Task

Hi All,
I have OIM 11.1.1.5.4 in Solaris 10 and I have an Oracle Table configured as Trusted Source.
I am using Database_App_Tables_9.1.0.5.0 connector.
I want Reconciliate new users from a Oracle Table as follow:
1. I ran the scheduled job
2. The new users reconciled Must get into an Approval Task before of insert them into USR Table.
3. The Administrator User Approved o Rejected the new users.
4. The new users that were approval Must insert them into USR Table.
Is there any form of implement this?, Can you guide me please?.
Thanks for your Help.

Through your Schedule Task, generate "*Create User*" (Request Type) request and assign approval workflow for such requests.
After completion of approval ONLY, users will get created into OIM 11g.

What is the Object Type for User Define table ?

Dear All Experts,
I create one of the User Define Table with no. of UDF's
I already register User Define Table with Unique ID.
As per my knowledge, Unique ID is our Object type for that User Define Table.
I want to add Transaction Notification Code for created Used Define Table.
This Transaction Notification prevents user to must enter name in that form.
IF (@object_type = 'Z_Roto' AND (@TRANSACTION_TYPE = 'A' or @TRANSACTION_TYPE = 'U'))
BEGIN
If not Exists (Select T0.DocEntry from [@Z_ROTO] T0 Where ( T0.Name is null OR T0.Name = ' ' ) AND T0.Code = @list_of_cols_val_tab_del )
begin
SET @error = 1
SET @error_message = 'Name is NULL then So, Please enter ZERO Value i.e. 0 in Filed_Name'
End
End
Please help me for this problem.
Thanks & Regards,
Nishit Makadia

Hi All,
Thanks for your replay.
Below code is working for User Define Table's Transaction Notification
IF (@transaction_type = 'A' OR @transaction_type = 'U') AND @object_type = 'Z_Roto'
BEGIN
If Exists (Select T0.Code from [@Z_ROTO] T0 Where ( T0.Name is null OR T0.Name = ' ' ) AND T0.Code = @list_of_cols_val_tab_del)
begin
select @error = 10
select @error_message = 'Name is NULL then So, Please enter ZERO Value i.e. 0 in Filed_Name'
End
End
Necessary to Remember 4 Things. That are mentioned below.
1) Register User Define Table (UDT) with using "Object Registration Wizard". For Example : @object_type = 'Z_Roto'
2) When you define selection criteria then it must be compulsory for use Code Field. For Example : Select T0.Code from [@Z_Roto]
3) When you define selection criteria then it must be compulsory for use Code for @list_of_cols_val_tab_del.
4) Use error code as 10 Number
Thanks & Regards,
Nishit Makadia

E Portal User Administran--Automatic loss of assigned roles of users

Hi All,
Some users are losing assigned roles automatically without anybody modifying User administration part.This is happening frequently.
My senior told me that
"roles are based on Active Directories. When Users move from one location to another there is change in the Active Directories.
If Active directories do not get refreshed properly roles will be not come up."
Please guide me.
Thanks in advance,
Gangadharayya.

Hi Gangadharayya,
Check the Unique ID of the user(whose role has lost) in the system Administration --> support -->support Desk -->
User Management >Test component for UME objects
Enter the user ID of the user(whose role has lost)in the Get User table. And click the 'Get' .
And in the bottom of that screen you ll get the 'UME User toString' table. In that get the unique ID of the user and check this unique ID with the LDAP.
Try the same steps from the role. Give the Role ID search in the 'Get Role ' column and click get. Now compare the unique IDs of the user.
Regards,
Birla.

Move a user, drag and drop

Hi,
I have created new nodes in PPOMA_BBP and will drag and drop users from other nodes to the new node.
will the users take on the attributes of the new node or hold what they had? i.e. are the attributes (co code, plant) determined by the user or the node? or will I have to change the attributes manually after I have moved the user?
Thanks
B

Hi,
In addition to Vinay's remarks and my previous reply let me make you clear on few things :
1. Using BBP_BP_OM_INTEGRATE txn. by inputting the business partner number you can check for the inconsistencies for object existence, object links, address consistency, attribute supply etc. All the options there should show Green traffic light.You can try repairing the inconsistencies by clicking on the Start repair icon.
2. In case the inconsistencies are irrepairable use USERS_GEN txn to delete employee assignment and reassigning the user to Org.unit.
3. As your requirement is to deassign users from one org. unit to other org. unit (for example from one P.Org to another P.Org / one P.Group from another P.Group) even though you drag and drop user can not create new follow on documents from the previous shopping carts as the user no longer belongs to the old Org. unit.
So its not because of USERS_GEN txn. user will not able to assign the SCs but because of change in Org.Unit assignment which further changes the user attributes.
Hope this makes you more clear and helps in resolving your issue. Clarifications are welcome.
Award points for helpful answers.
Rgds,
Teja

HT5019 Is there a way to disable the toolbar from preventing windows being dragged to external monitors configured above it?

My preferred display arrangement is to have 2 external monitors (extended display) above my macbook pro screen. While it is possible to configure this in my display preferences, the toolbar on my desktop prevents me from dragging anything to the external monitors. Is there a way to disable whatever the toolbar is doing to cause this?

I have exactly the same concern. It seems it would be a simple fix for Apple to allow users to turn off the camera (and even the mic) while keeping FaceTime open -- especially now that it turns out FaceTime must remain open in order to send and receive iPhone calls on a Mac.
I like to think this new functionality of FaceTime will be baked into a future release of Yosemite, as the current setup has that not-quite-finished feel of a work in progress. In the meantime, there's nothing like a little piece of Post-It stuck over the camera to keep the NSA from watching your face as you type a post to the Apple Support Communities.

Prevent IC user drag table borders in Assignment

Similar Messages

Maybe you are looking for