Price is not being updated when creating a sales order using DTW oOrders

Hello experts,
When I create a sales Order using DTW (oOrders), the information in the input files document.csv and document_lines.csv is updated with no problem, except the price. The price is being ignored from the input files.
Is there something that I must considered when trying to update the price of a sales order using the DTW?
The field "price" was mapped in the source and target fields in DTW.
Here is the document_lines.csv
RecordKey,LineNum,AccountCode,Address,ItemCode,LineTotal,Price,Quantity,ShipDate,WarehouseCode,TaxCode
RecordKey,LineNum,AccountCode,Address,ItemCode,LineTotal,Price,Quantity,ShipDate,WarehouseCode,TaxCode
1,1,_SYS00000000059, ,30PA08-0360-25,1,11.2,3,20110702,V08,A5
1,2,_SYS00000000059, ,30PA08-0707-25,1,15.2,3,20110702,V08,A5
1,3,_SYS00000000059, ,30PA08-0707-22,1,18.3,3,20110702,V08,A5
And the document.csv:
RecordKey,DocEntry,CardCode,DocDate,DocDueDate,DocTotal
RecordKey,DocEntry,CardCode,DocDate,DocDueDate,DocTotal
1, ,c-6167,20110702,20110702,2
Thank you for your help
Jorge Manzo

Hi,
Try to re-create your dtw using my template,and use text tab when saving your template.
SO-Header
RecordKey     CardCode     CardName     Comments     DocDate     DocDueDate     DocNum
RecordKey     CardCode     CardName     Comments     DocDate     DocDueDate     DocNum
1     24-25 MANUFACTU     24-25 MANUFACTURING          4/5/2010     4/15/2010     11142
SO-LINE
RecordKey     linenum     itemcode     qty     uom      PriceAfterVAT      Price     SalesPersonCode
RecordKey     linenum     itemcode     qty     uom      PriceAfterVAT      Price     SalesPersonCode
1     0     SHAFT HEX 7/8"     1     pc     4536     4050     CRIS
Note : Line -(LINE NUM and QTY is important upon computation of Price if SO is ITEM TYPE Document.
hope this will help you!
Regards,
Darius

Similar Messages

Sale Order Item Quantity Not Populating When Create A Sale Order Using BAPI

I am having a problem when creating a sale order using BAPI
BAPI_SALESORDER_CREATEFROMDAT2
Problem is that sale order item quantity field is not populating
code is as follows
ORDER_ITEMS_IN-ITM_NUMBER = '0010'.
ORDER_ITEMS_IN-MATERIAL = '000000000010000262'.
ORDER_ITEMS_IN-TARGET_QU = 'LB'.
ORDER_ITEMS_IN-TARGET_QTY = 1.

Hi,
Try populating ORDER_SCHEDULES_IN table in the bapi field REQ_QTY.
Regds,
Rudra

Problem when creating a sales order using BAPI_SALESORDER_CREATEFROMDAT2

Hello All,
I am working on a requirement where i need to create a new sales order from old sales order (Not all the items of the old sales order are to be copied) i am doing this by getting the data using BAPISDORDER_GETDETAILEDLIST to get the old sales order details and send them to BAPI_SALESORDER_CREATEFROMDAT2.
My problem is that i when i send the condition also the system in addition to the conditions sent to the BAPI is also automatically proposing the condition types . So the final result is that the sales order ends up having the condition types twice .
For example VPRS AZWR are visible twice in the sales order.
Any inputs to solve the problem will be definitely rewarded.
Thanks in advance.
Regards,
Sowmya.

Hello All,
I am working on a requirement where i need to create a new sales order from old sales order (Not all the items of the old sales order are to be copied) i am doing this by getting the data using BAPISDORDER_GETDETAILEDLIST to get the old sales order details and send them to BAPI_SALESORDER_CREATEFROMDAT2.
My problem is that i when i send the condition also the system in addition to the conditions sent to the BAPI is also automatically proposing the condition types . So the final result is that the sales order ends up having the condition types twice .
For example VPRS AZWR are visible twice in the sales order.
Any inputs to solve the problem will be definitely rewarded.
Thanks in advance.
Regards,
Sowmya.

My apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.

my apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.

Must be serious because you have stated the problem 4 times now.
Here are a number of things that you can try and maybe one of them will help.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
You can also try going to the App Store, find an app that needs an update, tap on the app icon to bring up the description page, then tap on install that way, rather than using the Update option from the app updates screen.
And ... You can always install the updates in iTunes on your computer and then sync them to the iPad.

Parent members not being updated when running AGG

I have a scenario where eventhough the bottom level members change the parent members are not being updated when we run an agg
For example if the bottom level member was 150 and we run the aggregate the numbers are fine. If the bottom level member was changed to #Missing then the parent members are not updated when we run the agg
IN the script below we use CALC DIM(COstCenters,SpaceTYpe)
My concern is the setting SET FRMLBOTTOMUP ON i use, because it looks like it's skipping that block. HOw can work around this issue without affecting the performance too much. For example using SET CREATEONMISSINGBLK ON might help, but will have a performance impact
Here are the details of the script
SET MSG SUMMARY;
SET FRMLBOTTOMUP ON;
SET CALCPARALLEL 4;
FIX("Budget","Version1", "FY2011", "RSF","No_Period","M3","M6","M9","M12",@IDESCENDANTS("$1"),@LEVMBRS
(SpaceType,0),@LEVMBRS(CostCenters,0))
CALC DIM (ManagedBU,AllocatedBU);
ENDFIX
FIX("Budget", "Version1", "FY2011", "RSF","No_Period","M3","M6","M9","M12",AllocatedBU,ManagedBU,
@LEVMBRS(SpaceType,0),@LEVMBRS(CostCenters,0))
"$1";
ENDFIX
/* Aggregating numbers for the report so it could be viewed n a top cost center level */
FIX("Budget", "Version1", "FY2011", "RSF","No_Period","M3","M6","M9","M12",@IDESCENDANTS(AllocatedBU),@iDESCENDANTS(ManagedBU),@IDESCENDANTS("$1")
CALC DIM(COstCenters,SpaceTYpe);
ENDFIX
/* Aggregating numbers for the report so it could be viewed in a top regional level*/
FIX("Budget", "Version1", "FY2011", "RSF","No_Period","M3","M6","M9","M12",@IDESCENDANTS(ManagedBU),@IDESCENDANTS(AllocatedBU),@IDESCENDANTS(SpaceType),CostCenters)
@IANCESTORS("$1");
ENDFIX

yes Aggmissg will work with from bottom up. As for performance, believe it or not, having Aggmssg on is quicker that off. That is because when off, it has to look at the children blocks to determine if there are data values present that need to overwrite the parent value where hen it is on, it does not look it just does it.

Automatic creation of intercompany PO when creating a Sales Order

Hi Experts
Is there a standard way of triggering an intercompany PO when creating a sales order to the final customer (or the other way around, triggering a sales order to the end customer upon creation of an intercompany PO)? Scenario: business has setup a logistics company (company code X), which its purpose is to deliver goods to the final customer (home customers). However, sales orders are created from seperate chain of stores which belong to another company code (company code Y). This chain of stores have one sales organisation (since there is over 1000 stores under a chain). I need a way to represent that a sale originated from a store/plant belonging to company Y to end customer A. Also, I need a billing document (intercompany) from company code X to store/plant beloning to company Y.
Issues: in the intercompany config (assign intern customer numbers to sales org) - is there a way to assign a customer number at site/plant level so that when creating an intercompany billing it can be picked instead of the one assigned to the sales org and where can this be specified in the sales order (remember: in my scenario there are multiple stores/plants that belong to one sales organisation and it is not possible to use one customer number linked to the sales organisation.)
Desired results:
Sales order from store/plant YY belonging to company code Y to end customer A
Intercompany billing from plant XX belonging to company code X to store/plant YY
End customer billing from store/plant YY to end customer A
Thank you in advance for your help.

Hello Tsmash
I think you can acheive this with Regular Sales order + Inter Company STO combination.
Maintain customer numbers for each of the Plants from Company Y for the sales area belonging to Company X.
Then do the config for STO in MM using this menu path:
SPRO/Materials Management/Purchasing/Purchase Order/Set up Stock Transport Order
Here, in the activity 'Define Shipping Data for Plants', enter each of the plant-customers and the Sales area belonging to Comany code Y. Carry out other activities in this area appropriately.
Similarly set up Custom ( say Z1) Special Procurement type for Plant YY for stock transfer from XX using this menu path:
SPRO/Production/Material Requirements Planning/Master Data/Define Special Procurement Type:
Here maintain procurement type as F, Special procurement as U and plant as XX. You may need to repeat this config for each of the receiving plants (over 1000 stores under a chain) from co code Y.
In the material master MRP 2 for Plant YY, maintain procurement type as F and Special Procurement as Z1.
Sales order will be received under Co Code Y and sales area belonging to Y form customer A,
Because of the MRP config, a PO (STO) requirement will be raised on Co code X and plant XX. XX will send the goods to YY via a STO delivery using the Shipping data from 'Set up STO' config,
Plant YY will send the goods to A and bill that customer. Co Code X will raise an inter-comany bill on Co code Y.
That's how it should work. Try it and revert with any issues.

Billing document should not be cancelled after creating return sales order

Hi All,
Billing document should not be cancelled after creating return sales order with reference to billing document. Please suggest configuration settings on the same.
Sudheer.

Hi,
In SAP, when the sub-sequent document is existing , we can not cancel the preceeding document. Therefore if you want to cancel the billing document you need to calcel the documents which are created with reference to that.
Check and confirm.
Regards,
Ravi Duggirala

Line item data is not saving while creating a Sales order using Interactive

Hi all,
I am creating a sales order Using Interactive forms. In the form i am having Header data and line item data.I had created two structures one for Header data and one for Line item data. For entering the LINE ITEM DATA i had created a Dynamic table with Buttons ADD ROW and DELETE ROW.
User will Add the Row or Delete the Row based on the requirement.
My issue is When ever the user clicks the SUBMIT button after entering the header data and 3 line items data , Sales order has been created with only first line item and the remaining two line items are not created.
My Interactive form is like below
HEADER DATA
DOC_TYPE
SALES_ORG
DIST_CHN
DIVISION
PURCH_NO
PARTN_ROLE
PART_NO
LINE ITEM DATA
                         ITEM_NO      MATERIAL          PLANT          QTY        COND_TYPE            COND_VALUE
ADD ROW
DELETE ROW
                                                                                SUBMIT
My code for the method ONACTIONCLICK is like below
method ONACTIONCLICK .
data:
      Node_Adobe       type ref to If_Wd_Context_Node,
      Node_Zsaleheader       type ref to If_Wd_Context_Node,
      Elem_Zsaleheader       type ref to If_Wd_Context_Element,
      Stru_Zsaleheader       type If_Main=>Element_Zsaleheader,
      Node_Zsaleitem       type ref to If_Wd_Context_Node,
      Elem_Zsaleitem       type ref to If_Wd_Context_Element,
      Stru_Zsaleitem       type If_Main=>Element_Zsaleitem.
data: header_data type BAPISDHEAD.
data: item_wa type BAPIITEMIN.
data: item_data type table of BAPIITEMIN.
data: partner_wa type BAPIPARTNR.
data: partner_data type table of BAPIPARTNR.
data: sales_order type BAPIVBELN-VBELN.
data: Errorlog type BAPIRETURN1.
navigate from <CONTEXT> to <ADOBE> via lead selection
Node_Adobe = wd_Context->get_Child_Node( Name = IF_MAIN=>wdctx_Adobe ).
navigate from <ADOBE> to <Zsaleheader> via lead selection
Node_Zsaleheader = Node_Adobe->get_Child_Node( Name = IF_MAIN=>wdctx_Zsaleheader ).
Node_Zsaleitem = Node_Adobe->get_Child_Node( Name = IF_MAIN=>wdctx_Zsaleitem ).
get element via lead selection
Elem_Zsaleheader = Node_Zsaleheader->get_Element( ).
Elem_Zsaleitem = Node_Zsaleitem->get_Element( ).
get all declared attributes
Elem_Zsaleheader->get_Static_Attributes(
    importing
      Static_Attributes = Stru_Zsaleheader ).
header_data-DOC_TYPE = Stru_Zsaleheader-DOC_TYPE.
header_data-SALES_ORG = Stru_Zsaleheader-SALES_ORG.
header_data-DISTR_CHAN   = Stru_Zsaleheader-DISTR_CHAN.
header_data-DIVISION = Stru_Zsaleheader-DIVISION.
header_data-PURCH_NO = Stru_Zsaleheader-PURCH_NO.
partner_wa-PARTN_ROLE   = Stru_Zsaleheader-PARTN_ROLE.
partner_wa-PARTN_NUMB = Stru_Zsaleheader-PARTN_NUMB.
   append partner_wa to partner_data.
    Elem_Zsaleitem->get_Static_Attributes(
    importing
      Static_Attributes = Stru_Zsaleitem ).
item_wa-ITM_NUMBER = Stru_Zsaleitem-ITM_NUMBER.
item_wa-MATERIAL   = Stru_Zsaleitem-MATERIAL.
item_wa-PLANT = Stru_Zsaleitem-PLANT.
item_wa-REQ_QTY = Stru_Zsaleitem-REQ_QTY.
item_wa-COND_TYPE   = Stru_Zsaleitem-COND_TYPE.
item_wa-COND_VALUE = Stru_Zsaleitem-COND_VALUE.
append item_wa to item_data.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT1'
EXPORTING
    ORDER_HEADER_IN           = header_data
WITHOUT_COMMIT            = ' '
CONVERT_PARVW_AUART       = ' '
IMPORTING
   SALESDOCUMENT             = sales_order
SOLD_TO_PARTY             =
SHIP_TO_PARTY             =
BILLING_PARTY             =
   RETURN                    = errorlog
TABLES
    ORDER_ITEMS_IN            = item_data
    ORDER_PARTNERS            = partner_data
ORDER_ITEMS_OUT           =
ORDER_CFGS_REF            =
ORDER_CFGS_INST           =
ORDER_CFGS_PART_OF        =
ORDER_CFGS_VALUE          =
ORDER_CCARD               =
ORDER_CFGS_BLOB           =
ORDER_SCHEDULE_EX         =
endmethod.
PLEASE SUGGEST ME IF ANY CODE CHANGE IS REQUIRED
Thanks in advance
Ajay

Hi,
The item data is not read because, the dynamically added rows should also reflect back to the Web Dynpro context. When the user clicks on Add Row, use the Onsubmit event to add a empty line to internal table and then bind it to the context. And if the user removes a row, remove a row from internal table and bind it back to the context.
You may refer this article.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/802f0ed1-a17a-2c10-7db4-d515a5b047ed
Regards,
Runal

Error in GTS when creating a sales order

Hello All:
Let me first say that I have researched the forums and web for my answer to no avail...there is not a lot of information out there for GTS issues.
When creating a sales order in ECC 600; I am receiving errors...I have looked at SLG1 in order to get more information on these errors. I have validated my config in GQ0 and it appears to be correct. Here is my errors I am receiving:
Legal Control: Item Type Mapping not Maintained
Item Category: ZTAE
Item Category: ZTAQ
Legal Control: Partn. Function Mapping not Maintained
Partner Function: AG
Partner Function: AP
Partner Function: CI
Partner Function: EN
Partner Function: RE
Partner Function: RG
Partner Function: SP
Partner Function: WE
Legal Control: Mapping of Org. Units not Maintained For Fore
Company Code: 1000
Legal Control: Mapping of Org. Units not Maintained For Lega
Plant: 1000
I have looked under the Org Structure for these errors and think my configuration is correct. I have checked under the following:
In SPRO I have done the following Config under Org Structure:
Define Foreign Trade Organizations
Assign Company Code At Feeder System
Define Legal Units
Assign Legal Unit to Foreigne Trade
Assigned Plant at Feeder System
In Spro I have done the following Config under Partner Structure:
Define Partner Functions
Define Groups of Partner Functions
Assign Partner Functions at Feeder system
In SpRO under Compliance Management I have done the following Config under document structure:
Define Doc Types
Assign Doc types at feeder system
Define item categories
Assign item categories at feeder system
It is obvious I am missing something....Please help...it would be greatly appreciated....

Hi Dave
Thanks for replying.
For Business Partners the error I am getting in SLG1 is the follwoing:
Sub Object text
Mapping of API to Customs Shipment - Arrival
Program
/SAPSLL/SAPLCORE_APPLOG_SERV
@5C\QError@
The system was unable to determine an FT organiz. for company code 1000
The system was unable to determine a legal unit for plant 1000
No mapping information exists for partner function AG
Another error for Business Partner:
sub object text
Business Partner Distribution
Program
/SAPSLL/SAPLCORE_APPLOG_SERV
@5C\QError@
Please use another function to maintain the SPACE version of the address
For Item Categories
SubObect TextMapping of API to Customs Shipment - Arrival
Program
/SAPSLL/SAPLCORE_APPLOG_SERV
@5C\QError@
No mapping information exists for item type ZTAQ
The system was unable to determine a legal unit for plant 1000
No mapping information exists for partner function AG
Also we are using GTS 7.2 but upgrading to GTS 10 and I am trying to create our testing client for a to test after upgrade
Edited by: Kim Blair on Sep 9, 2011 4:57 PM
Edited by: Kim Blair on Sep 9, 2011 4:58 PM

Is it possible to use variant configuration (with a Non-SAP solution) when creating ERP sales orders in SAP CRM WebUI

Hello,
our customer plans to use a Non-SAP solution for variant configuration (Camos) in SAP ERP (ECC 6.0) and in SAP CRM 7.0 EHP1 as well.
ERP sales orders (and ERP quotations) should be created in SAP CRM (CRM WebUI).
Is it possible to use variant configuration (with an external variant configuration tool) when creating ERP sales orders and quotations in the SAP CRM WebUI or do we have to implement SAP IPC for this?
Thanks in advance.
Regards,
AEV

Dear AEV,
I think LORD (lean orders) should work with variant configuration as well. In the note 1236015 there is not restriction listed. However you need lord2 activated in ECC, and ECC system should be on EHP4.
Best regards
Rene

Not be able to create a sales order if credit insufficient

Hello Gurus
how can I block a sales order (not delivery ) if credibility is not sufficient for a customer (credit block on sales order). Thus it should not be able to create a sales order.
what is a stepwise method here ?
Kind Regards

hi manjoy,
i understood ur query in this way.
you dont want to take sales orders from a cusotmer whose credit history is not good. u dont want to allow the system to create orders for this customer. if my understanding is right , u can block this customer in transaction fd32. there is a field " block customer" in fd 32 transaction. if u check this field system will not allow to create any orders for this customer.
Let me know if i misunderstood ur query

FM SD_SALESDOCUMENT_CREATE on creating a sales order using reference

I create a sales order using a reference order number.On displaying it in VA02, and giving document flow, the reference document which I used to create the sales order gets displayed.
A program/fm u2018Xu2019 is called on giving document flow (which takes the reference order number I used as input )
Now if that u2018Xu2019 is getting the data of the reference order I used from some table u201CT_Yu201D.This table u201CT_Yu201D must be set during sales order creation itself. So, some program which is called during creation of sales order gets the reference order number I used as input and puts it in that table u201CT_Yu201D.
My assumption is that SD_SALESDOCUMENT_CREATE is the function module handling that part. If it is not for that, then what is its function.
*****If it is handling that part, which structure which this FM gets as input contains that order number which I used as reference?
There are 3 bapiu2019s called on sales order creation, BAPI_SALESORDER_CREATEFROMDAT2, BAPI_SALESORDER_CREATEFROMDAT1, BAPI_SALESORDER_CREATEFROMDATA.
Only one BAPI calls SD_SALESDOCUMENT_CREATE namely BAPI_SALESORDER_CREATEFROMDAT2
*****Why does the FM SD_SALESDOCUMENT_CREATE not get triggered when I set a breakpoint in it during sales order creation?

Please search in SDN so many thread related to create sales order

Creating a Sales Order using Web Dynpro

Hi SDN,
I want to create a Sales Order using Web Dynpro application. For that i have used "Bapi_Salesorder_Createfromdat2" as a adaptive RFC model. Every thing is fine and i could able to create a sales order for a single line item. But my intension is to create a sales order for multiple line items. So in the "Intialview" i have used a "Table" UI element to pass multiple line items. When i execute this application i could pass only single line item from this table. The table UI contol is not allowing to enter the second line item in the second row of the table. Can any one suggest me to solve this problem.
Thanks in advance.
Regards
Basha

Hi Basha,
You need to create new element for the model node manually. For example: Create button "New item" and in action handler put someting like described here:
Add row to table
How to add more values in a Table in WD appl
How to add a row to table dynamically?
How to add a column to a table dynamically.
add row to table bound to rfc model
Best regards, Maksim Rashchynski.

Error while creating the sales order using Proxy

Hi Folks,
I am trying to create a Sales Order using Proxy via BAPI "BAPI_SALESORDER_CREATEFROMDAT2" :
and i got this type of standard error message
<Message>FB call: insufficient parameters</Message>
few days back only i used the same bapi for creating the Sales Order and did it successfully...using the same parameters
I don't have any clue about this type error .
Kindly guide .
Regards,

Hi Nikhil,
How refreshing the cache and restart the server will help ?
basically i am testing the scenario at R/3 end only by generating XML template in SPROXY.
My ECC 6.0 is on sp 12....I am not sure is it configuration related error or a bug ? as i have used the same code in ECC 6.0 with sp 09.
regards,

How to create a sales order using PO ALE Idoc

Hi,
I have a purchase order in my ECC6 system, and output for this PO is ALE idoc.
Now I want to create a Sales order using that Idoc in the same system,
can anbody please tell the procedure
sreeram

Do NOT USE BAPI_SALESORDER_CREATEFROMDATA, that FM is obsolete!
Use BAPI_SALESORDER_CREATEFROMDAT1 .
To build a reference to your contract you have to supply ORDER_HEADER_IN.
Here´s a sample:
MOVE:
gs_vbak-vbeln TO ls_bapisdhd1-refobjkey,
gs_vbak-vbeln TO ls_bapisdhd1-ref_doc,
gs_vbak-vbtyp TO ls_bapisdhd1-refdoc_cat,
gs_vbak-auart TO ls_bapisdhd1-refdoctype.
also gothrouh the links
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/abap%2b-%2bsimple%2bprogram%2bto%2bcreate%2bsales%2border%2busing%2bbapi

Price is not being updated when creating a sales order using DTW oOrders

Similar Messages

Maybe you are looking for