Parent members not being updated when running AGG

I have a scenario where eventhough the bottom level members change the parent members are not being updated when we run an agg
For example if the bottom level member was 150 and we run the aggregate the numbers are fine. If the bottom level member was changed to #Missing then the parent members are not updated when we run the agg
IN the script below we use CALC DIM(COstCenters,SpaceTYpe)
My concern is the setting SET FRMLBOTTOMUP ON i use, because it looks like it's skipping that block. HOw can work around this issue without affecting the performance too much. For example using SET CREATEONMISSINGBLK ON might help, but will have a performance impact
Here are the details of the script
SET MSG SUMMARY;
SET FRMLBOTTOMUP ON;
SET CALCPARALLEL 4;
FIX("Budget","Version1", "FY2011", "RSF","No_Period","M3","M6","M9","M12",@IDESCENDANTS("$1"),@LEVMBRS
(SpaceType,0),@LEVMBRS(CostCenters,0))
CALC DIM (ManagedBU,AllocatedBU);
ENDFIX
FIX("Budget", "Version1", "FY2011", "RSF","No_Period","M3","M6","M9","M12",AllocatedBU,ManagedBU,
@LEVMBRS(SpaceType,0),@LEVMBRS(CostCenters,0))
"$1";
ENDFIX
/* Aggregating numbers for the report so it could be viewed n a top cost center level */
FIX("Budget", "Version1", "FY2011", "RSF","No_Period","M3","M6","M9","M12",@IDESCENDANTS(AllocatedBU),@iDESCENDANTS(ManagedBU),@IDESCENDANTS("$1")
CALC DIM(COstCenters,SpaceTYpe);
ENDFIX
/* Aggregating numbers for the report so it could be viewed in a top regional level*/
FIX("Budget", "Version1", "FY2011", "RSF","No_Period","M3","M6","M9","M12",@IDESCENDANTS(ManagedBU),@IDESCENDANTS(AllocatedBU),@IDESCENDANTS(SpaceType),CostCenters)
@IANCESTORS("$1");
ENDFIX

yes Aggmissg will work with from bottom up. As for performance, believe it or not, having Aggmssg on is quicker that off. That is because when off, it has to look at the children blocks to determine if there are data values present that need to overwrite the parent value where hen it is on, it does not look it just does it.

Similar Messages

My apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.

my apps are not being updated when pressing the update all button. It just says installing and no update is being done., my apps are not being updated when pressing the update all button. It just says installing and no update is being done.

Must be serious because you have stated the problem 4 times now.
Here are a number of things that you can try and maybe one of them will help.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
You can also try going to the App Store, find an app that needs an update, tap on the app icon to bring up the description page, then tap on install that way, rather than using the Update option from the app updates screen.
And ... You can always install the updates in iTunes on your computer and then sync them to the iPad.

Class not being created when running from jar

Hi all,
Tech info first:
IDE: Sun Java Studio Enterprise 8
Plaform: windows xp
I have created a Swing app, that connects to a com port(using the RXTXcomm). now, when I run the app in the IDE, everything is fine and dandy, but, when I run the jar file, the application loads, but the class in the app which deals with the com port is not created. here is the code:
    private static void createAndShowGUI() {
        //Make sure we have nice window decorations.
        JFrame.setDefaultLookAndFeelDecorated(true);
        Main receiver = new Main();
        receiver.getPropertiesFromFile();
        //Create and set up the window.
        frame = new JFrame("R�FILOG RFID Empf�nger");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setContentPane(receiver.mainPanel);
        frame.setJMenuBar(receiver.createMenuBar());
        frame.addWindowListener(receiver);
        frame.setLocationByPlatform(true);
        //Display the window.
        frame.pack();
        frame.setVisible(true);
        portListener = new RFIDReaderComm(receiver, "COM3");
        portListener.getConfiguration();
    public static void main(String[] args) {
        //Schedule a job for the event-dispatching thread:
        //creating and showing this application's GUI.
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
portListener in the createAndShowGUI() function is an interface level parameter and is the class that is not being created. There is no error message.
If I move the two lines that deal with the port listener before the frame.pack() line, then the GUI is not even loaded, and when I view the processes in the task manager, the process starts and then quits without anything becoming visible. So from this I guess there is a problem with creating the class when running from a jar, but without any error messages, I have not a clue where to start...can anyone help?
thanks in advance.

Well, some more info, so maybe someone can come up with some tips for me...this is really important, and any help is greatly appreciated.
This is obviously a classpath problem. After running the my jar file with java -jar I finally got the error NoClassDefFoundError
Kind of obvious I suppose. But, I cannot seem to get the two jar files I need into the classpath. I have tried the following:
Updating my computers CLASSPATH with the relevant paths - not working
Trying to get the Sun Java Studio Enterprise to build the required jar files into the final package - cannot get this to work
Tried updating the manifest.mf in the following way:
Created a text file Manifest.txt with the lines:
Class-Path: RXTXcomm.jar
Class-Path: BrowserLauncher2-10rc4.jar
ran the command (in the same directory as Manifest.txt):
jar cfm RUFILOGScanner.jar Manifest.txt classes/*.class
but this does not work either. When I run: jar tf RUFILOGScanner.jar all I get is:
META-INF/
META-INF/MANIFEST.MF
classes/
classes/CRCCalculator.class
classes/Main$1.class
classes/Main.class
classes/RFIDReaderComm.class
classes/URLDialog$1.class
classes/URLDialog$2.class
classes/URLDialog.class
the classes I want added are not there. Plus, (I think this is because I am running SE8) the manifest.mf is not in a folder called META-INF. In fact, I have no folder called META-INF. Is this significant?
Please, can anyone help me?

Price is not being updated when creating a sales order using DTW oOrders

Hello experts,
When I create a sales Order using DTW (oOrders), the information in the input files document.csv and document_lines.csv is updated with no problem, except the price. The price is being ignored from the input files.
Is there something that I must considered when trying to update the price of a sales order using the DTW?
The field "price" was mapped in the source and target fields in DTW.
Here is the document_lines.csv
RecordKey,LineNum,AccountCode,Address,ItemCode,LineTotal,Price,Quantity,ShipDate,WarehouseCode,TaxCode
RecordKey,LineNum,AccountCode,Address,ItemCode,LineTotal,Price,Quantity,ShipDate,WarehouseCode,TaxCode
1,1,_SYS00000000059, ,30PA08-0360-25,1,11.2,3,20110702,V08,A5
1,2,_SYS00000000059, ,30PA08-0707-25,1,15.2,3,20110702,V08,A5
1,3,_SYS00000000059, ,30PA08-0707-22,1,18.3,3,20110702,V08,A5
And the document.csv:
RecordKey,DocEntry,CardCode,DocDate,DocDueDate,DocTotal
RecordKey,DocEntry,CardCode,DocDate,DocDueDate,DocTotal
1, ,c-6167,20110702,20110702,2
Thank you for your help
Jorge Manzo

Hi,
Try to re-create your dtw using my template,and use text tab when saving your template.
SO-Header
RecordKey     CardCode     CardName     Comments     DocDate     DocDueDate     DocNum
RecordKey     CardCode     CardName     Comments     DocDate     DocDueDate     DocNum
1     24-25 MANUFACTU     24-25 MANUFACTURING          4/5/2010     4/15/2010     11142
SO-LINE
RecordKey     linenum     itemcode     qty     uom      PriceAfterVAT      Price     SalesPersonCode
RecordKey     linenum     itemcode     qty     uom      PriceAfterVAT      Price     SalesPersonCode
1     0     SHAFT HEX 7/8"     1     pc     4536     4050     CRIS
Note : Line -(LINE NUM and QTY is important upon computation of Price if SO is ITEM TYPE Document.
hope this will help you!
Regards,
Darius

External projector not being detected when running Leopard

We have recently upgraded a number of our instructor laptops to Leopard. Since the upgrade, we have confirmed an odd problem.
We have a number of multimedia carts in classrooms. The carts use an Extron VSW2 splitter to supply video to a ceiling mounted NEC LT280 projector. One input on the Extron device gets video from a CPU in the cart, the second input is for the laptop.
We have tested identical computers (2 - PowerBook G4 12" laptops, and 2 - MacBook Pro 15" laptops). In each case, one laptop is running OS 10.4.11, the other 10.5.1.
The computers running 10.4.11 detect the the projector and mirror the display. The computers running 10.5.1 will not detect the projector. The computers running 10.5.1 blank the screen when the video cable is attached, but nothing is displayed through the projector. System Profiler reports under 'Hardware -> Graphics/Displays -> Display Connector:' No Display Connected.
If I bypass the VGA splitter (plug the laptops into the VGA port at the wall plate which goes to the projector), both the 10.4 and 10.5 computers function perfectly.
If I do not have a desktop connected to the VGA splitter, both the 10.4 and 10.5 laptops seem to work fine.
I have contacted the vendor that installed the units – Extron has never heard of this problem.
Right now this issue is affecting several instructors, but later in the term, as students need to give presentations, this will turn into a major impediment.
My speculation (unfounded, at this point) is that Leopard may be reducing the signal/voltage being delivered to the video port; the result being that there is not enough signal to trigger the switchover in Extron device.
Any guidance or direction would be greatly appreciated.

I think that Extron has an loop through on Input 1 for a monitor. You're probably using it for the CPU on the cart. Try running the Macs into Input 1 instead of Input 2. You may get it to work. The proj output on Extron stuff is usually buffered so that the projector doesn't pass info back to the computer. If you go into input 1, the computer will "see" the monitor and output properly.
Maybe.
Mind you, that doesn't help a whole lot 'cause you need the monitor for the CPU, right?

BeanInfo not being found when running from a JSP in WebLogic 6.1

Hi,
I wrote a BeanInfo base class for dynamically building HTML Tables using an array of beans. I wrote the code and tested it all using the command line and verified that the Beans were dynamically loading and displaying based upon the rules I had defined in the base class. Basically I was using the Introspector to find the class. When I transfered the code into a JSP running on WebLogic 6.1 it is never finding my BeanInfo. I even tried having the end BeanInfo be the bean itself (Had the Bean extend the BeanInfo). Still didn't find it and keeps giving me the default (or GenericBeanInfo) class to represent my Bean when calling the Introspector.getBeanInfo. I am making sure that my Introspector.setBeanInfoSearchPath is being done correctly. Like I said it is working ont the command line.
Why is the Introspector not finding the correct BeanInfo class for my Bean when I do it inside of a JSP?

Never mind, I figured out what is wrong. It always returns the GenericBeanInfo but it still goes throught the motions of calling the underlying BeanInfo.
So, ignoe. I can't delete the topic.

Spark Classes and Skins not being included when running FlexUnit task via Ant

I have a series of unit tests that run on a spark component. This spark component has a custom skin defined for it, and that is working beautifully.
Inside that component is a spark list... By default, after digging into the list code, spark lists should use a default skin called "BorderContainerSkin". When I run the application that uses this component directly (whether compiled via FlashBuilder or via Ant/Hudson), the component itself runs and looks exactly like I would expect. When I run my unit tests in the browser (via Run As Web Application command on my TestRunner), the unit tests all perform as expected.
However, when I run the FlexUnit tests via Ant (either through windows non-headless, or linux headless), an exception is thrown with the following error:
Error: Skin for FromToList132.FromToListSkin133.VGroup134.fromList cannot be found.
    at spark.components.supportClasses::SkinnableComponent/attachSkin()[E:\dev\4.x\frameworks\pr ojects\spark\src\spark\components\supportClasses\SkinnableComponent.as:632]
    at spark.components.supportClasses::SkinnableComponent/validateSkinChange()[E:\dev\4.x\frame works\projects\spark\src\spark\components\supportClasses\SkinnableComponent.as:405]
    at spark.components.supportClasses::SkinnableComponent/commitProperties()[E:\dev\4.x\framewo rks\projects\spark\src\spark\components\supportClasses\SkinnableComponent.as:419]
    at spark.components.supportClasses::ListBase/commitProperties()[E:\dev\4.x\frameworks\projec ts\spark\src\spark\components\supportClasses\ListBase.as:785]
    at spark.components::List/commitProperties()[E:\dev\4.x\frameworks\projects\spark\src\spark\ components\List.as:907]
    at mx.core::UIComponent/validateProperties()[E:\dev\4.x\frameworks\projects\framework\src\mx \core\UIComponent.as:7933]
    at mx.managers::LayoutManager/validateProperties()[E:\dev\4.x\frameworks\projects\framework\ src\mx\managers\LayoutManager.as:572]
    at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\4.x\frameworks\projects\framewo rk\src\mx\managers\LayoutManager.as:730]
    at mx.managers::LayoutManager/doPhasedInstantiationCallback()[E:\dev\4.x\frameworks\projects \framework\src\mx\managers\LayoutManager.as:1072]
(Note: fromList is the id of the spark list used in the FromToList component.)
The issue is that the "BorderContainerSkin" class isn't ever getting imported along the way. I did several things that worked to "fix" the problem, but they are all hacky and don't explain the root problem:
1- If I explicitly import that skin into my test file, then everything works great.
2- If I add the <includes> directive into my mxmlc task in the Ant file, and again specifically call out that skin class, then again it will work.
However, how would I know what skins from the spark library are going to get included and which aren't? How would I know that a default skin isn't included or where to find it or even what it is?
It seems like either I'm missing something in my Ant file or there is a serious bug here with the FlexUnit task. Can anyone shed light on if this is a known issue, any permanent fixes (that don't involve keeping track of a long list of strings of class references), or anything that I might be missing?
Thank you for any help!

Guessing the ant tasks aren't forcing the include of the spark skins libraries... which is a little silly. I would assume the compiler would take care of this but it is something we can investigate...
Not 100% sure as to why, but this is what it sounds like.
Mike

IPhoto won't open due to the not being updated but when I check to upgrade to iPhoto 11 it tells me it is installed. The photos in the library were modified using 9.1.5 and the iPhoto is said to be 7.1.5 (iPhoto 8). Any ideas?

iPhoto won't open due to the not being updated but when I check to upgrade to iPhoto 11 it tells me it is installed. The photos in the library were modified using 9.1.5 and the iPhoto is said to be 7.1.5 (iPhoto 8). Any ideas?

How do you know the library was modified with iPhoto 9 (11)? If you've never had iPhoto 9 on your Mac it could'nt have. It sounds like a damaged library. Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Who else has a problem with parental controls enabled not being able to run Firefox on the Mac?

Who else has a problem with parental controls enabled not being able to run Firefox on the Mac? (Any solutions?) (BTW. Chrome doesn't work either)

Although FF4 is so nice I'm almost ready to ditch iGoogle!
Please fix what appears to be an RSS/iGoogle issue with FF4...
Gmail is fine, but titles dont show in most RSS feed gadgets and no stories, strangely, apart from this one:
http://www.google.com.au/ig/directory?hl=en&url=www.google.com/ig/modules/builtin_news_technology.xml
Which if you enter the last part of the url reports that
"<Content type="html">
This is a builtin module, so the UserPrefs and Content are ignored."
Any ideas?

Can't Delete Private Cloud - tbl_WLC_PhysicalObject not being updated

I am having issues with our SCVMM instance where I can't delete Private Clouds...even if there empty.
When I right click the Private Cloud and click Delete, the "Jobs" panel says it finished successfully, however, the Private Cloud is not deleted.
After doing some researching, I believe its because entries in the tbl_WLC_PhysicalObject database table are not being updated correctly, when a VM is moved from one Private Cloud to another. After determining the "CloudID" of the Private
Cloud I am trying to delete, I still see resources assigned to this Private Cloud in the tbl_WLC_PhysicalObject table, even though from VMM Console, the Private Cloud shows up empty.
For some testing purposes, I assigned a VM back to the Private Cloud I am trying to delete, only to move it out again and gather some tracing/logging. When I moved the VM back out of the Private Cloud, I had a SQL Profiler running in the background, capturing
the SQL statements on the DB server. Looking at the "exec dbo.prc_WLC_UpdatePhysicalOBject" statement, I see the @CloudID variable is assigned the "CloudID" of the Private Cloud the VM is currently assigned to/the Private Cloud I am trying
to delete and is NOT the CloudID of the Private Cloud the VM is being moved to/assigned to.
Instead of having the VMM Console GUI do the Private Cloud assignment/change...I copied the PowerShell commands out...so I can run them manually. Looks like the script gets 4 variables ($VM, $OperatingSystem, $CPUType, and $Cloud), and then runs the "Set-SCVirtualMachine"
CMDLET. For the $Cloud variable, it does return the proper "CloudID" of the Private Cloud I am trying to move the VM too (I ran it separately and then ran an ECHO $Cloud to look at its value). When I run the "Set-SCVirtualMachine" CMDLET,
the output has values for "CloudID" and "Cloud" and these are still the values of the source Private Cloud/Private Cloud I am moving the VM out of and ultimately want to delete.
Has anyone ran into this? Is something not processing right in the "Set-SCVirtualMachine" CMDLET?

I been slowing looking into this and this is where I am at:
I built a development SCVMM 2012 R2 instance that mocks our production environment (minus all the VM's...just the networking configuration and all the private clouds have been mocked). From there, I started at SCVMM 2012 R2 GA and one by one installed
the 4 rollup patches in ordered and at each new patch level, I monitored the queries coming in through SQL Profiler, as I moved a VM between private clouds and created new VM's within clouds. As I created new VM's and moved the VM's between clouds. the
stored procedure "prc_WLC_UpdatePhysicalOBject" all have a value of NULL for the CloudID column....so a CloudID isnt even associated to the physical objects (basically the VHDX files and any mounted ISO's I have on the VM's).
I did find out this SCVMM instance was upgraded from SCVMM 2008 (I took over after the 2012 R2 upgrade was completed).
I am thinking at this point...nothing is wrong with SCVMM 2012 R2 if you build and recreate it from scratch and a new DB. I am thinking this might be a depreciated field from SCVMM 2008. The only other thing we did, was put in a SAN and moved VM's from stand-alone
hosts to the new CSV's (A mixture of 2008 R2 and 2012 NON R2 hosts).
At this point...since we dont have Self-Service enabled yet....it will be a days work to rebuild a new instance of SCVMM 2012 R2 and migrate the hosts/VM's to it and start from a clean slate.
I know the DB structure isnt really published...but does anybody have any other insights into this?

Changes to Planned Order in R/3 not being updated in APO

HEllo -
I am creating SNP planned orders EE in APO and sending them through CIF to R/3.
When I make changes( Qty change) to the planned order in R/3, those changes are not being updated in APO. When I run CCR, I get the error 159 - Differences in content.
When I create a planned order in R/3, that order does not flow into APO, running CCR gives the error 151 - Missing in APO.
Ofcourse, I can trigger the reconcialition job and make then go through but I have not been able to find the root cause. Can someone help me with this?
Appreciate your help
Varun

Hi Varun.
In the R3 system have you activated the BTE's?
SPRO
Integration with other SAP components->APO->Basic Settings for Data Transfer->Change Transfer->Change Transfer for Transaction Data->Activate Online Transfer Using BTE
Applications: ND-APO and NDI need to be activated.
Hope this helps.
M

Problem with Adobe Reader not being able to run with Maverick 10.9.2?

problem with Adobe Reader not being able to run with Maverick 10.9.2?

Have you updated your version of Adobe Reader?

Firefox is not remembering passwords for sites that i visit regularly. Ihave checked the box "remember passwords for sites" in the security tab under tools, but the passwords are not being remembered when I return to the sites.

Firefox is not remembering passwords for sites that i visit regularly. Ihave checked the box "remember passwords for sites" in the security tab under tools, but the passwords are not being remembered when I return to the sites. I am running v 3.6.18

Websites remembering you and automatically log you in is stored in a cookie.
* Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
Make sure that you do not run Firefox in Private Browsing mode.
* https://support.mozilla.com/kb/Private+Browsing
* In [[Private Browsing]] mode all cookies are session cookies that expire if that session is ended, so websites won't remember you.
* Do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
* http://kb.mozillazine.org/Cookies

Icons for apps are not being displayed when I open the App store, just getting gray color boxes

Icons for apps are not being displayed when I open the App store, just getting gray color boxes

Did you update your operating system? If so, did it solve the problem? I have not updated my OS because so many people complained that the newer Os's had problems.

Reversal documents are not being represented when 0PY_PP_C3 is being loade

We use the 0HR_PY_PP_2 and 0HR_PY_PP_1 infosources to load the 0PY_PP_C2 and 0PY_PP_C1 ODSs. Then 0PY_PP_C1 updates the 0PY_PP_C3 ODS.
Routines in the update rules include corresponding data from 0PY_PP_C2 during the update of 0PY_PP_C3. If there is no matching data in 2, then the corresponding records in 1 do not go into 3 Our process chain first loads 2, after it activates, it then loads 1, then updates 3.
There are 5 reversal documents are in 0PY_PP_C2.
The Update rules between 0PY_PP_C1 and 0PY_PP_C3 refer to the Posting Documents ODS: 0PY_PP_C2.
The issue is that the reversal documents are not being represented when 0PY_PP_C3 is being loaded.

Hi,
The simple solution is to debug the code written in the routine, as you mentioned that you already have some data in PP_C2 then check if that data is properly getting read in routine.
After that check the condition based on which you are skipping records of PP_C1 and not loading into PP_C3. Is your condition perfectly working fine?
Put a break point and check how the data is flowing.
Regards,
Durgesh.

Parent members not being updated when running AGG

Similar Messages

Maybe you are looking for