Price updation for Partial delivered case

Dear All,
I raised an invoice for 5 qty out of 10 nos from the sale order.
Now I want to sell the balance qty with updated price. I changed the price through VK12.
I changed the pricing date to current date in the sale order to effect the updated price in the sale order for the balance qty.
Since the item is partially delivered even though the pricing date is not getting updated for that item & the price remains same as older one.
Pls advise me on this issue.
Rgds,
Senni.B

Hi Seeni,
Lakshmi's has correctly stated above that repricing will not happen in sales order, but the repricing can happen in billing.
Now for repricing to happen in billing you will have to change your pricing type to B in copy control. Also as stated by you the billing date is to be set to current date will solve. Thats not completely true, you will have to change the pricing date in the invoice to current date then only it will do the repricing for current date. The billing date is for accounting purposes for Invoice due dates.
So to set the pricing date to current date, you will have to ensure that the pricing date is not present in the copy control routines and also in the definition of billing type change the pricing date to current date.
Hope this helps,
Abhishek

Similar Messages

MR21 performance slow on price update for several materials for a company c

Hi,
Can you please tell me if anyone has faced the problem of price updates through MR21 being very slow when performing the update for several materials at one go? Is there a resolution to this?
Thanks in advance

Check "Note 312013 - Bad performance when material price is changed"is applicable for your sap version ???

Credit check for Partially delivered order

Dear Gurus
We have a scenario where we are releasing a sales order (vkm3) forcefully since it is exceeding the dynamic credit check.
Now when we do a partial delivery for the first time it is working fine, But when we again try to create a delivery for the remaining qty it again gives the error of "dynamic check exceed".
My question is : why is it again showing the error msg at the time of delivery inspite of the sales order being released once. We have not made any changes in the Sales order. still we have to relaese the sales order everytime we create a new delivery for that released sales order,
Can anyone suggest anything
Regards
DDP

Hi DDP,
Info structures are updated daily/weekly/monthy basing on your configuration. The Info structure S066 in Transaction OMO1 is for credit. These Info Structures are used for different purposes eg reporting, for updating credit records etc. So once you release the order, the release would hold for one day, so you can do any number of partial deliveries on that day. But again on the second day it would be blocked for credit and updated in S066. For more information on Infostructures, you can search forum.
regards,
prasad

Contracts Price updation for every three months

Hi Experts,
we need to change multiple condition enties in contracts.All prices need to change and we need to update them
to new level. Since the field NET PRICE is grey I have to open each
individual item in the valid period and change price by price.
Since we have to update approx. 20 contracts every 3 months we would like to know
if there is an easier function / possibility to upload the data to SAP
for the contracts.
Please provide you needful suggesitions.
Rgds,
RK

HI Jack,
I can see this report RM06ENP0 with Tcode ME3P.
Can you pls guide me how to run the report RM06ENP0 with the "No Date Check" selected.
I mean where i have to select and what type of inputs need to maintain.
I dont have any idea if i run this report what will happend and how the prices will change for all contracts
Pls elaborate in detail.
Above "Qui" mentioned to use MEKR Tcode,if you have any idea on this also pls share me some points.
Brgds,
RK

New Price Updates for newly added Items Through VA02

Hi All,
Through VA02 ,If you change first date in line item we have written code in MV45AFZB(USEREXIT_NEW_PRICING_VBKD
) for updating price for that item.
Now the issue is if u add one more new line item through VA02 itself..here we were not getting that line item detials.because its not yet saved.
We want to update prices for newly added items also.

Hi Reddy,
For translation of any text , goto SE63 -> in menu TRANSLATION -> R/3 Enterprise - > Transport object -->
for Transport Entry of Object : R3TR SHI3 ZABC
then select target & source lang. click EDIT.
Hope this helps you.
Reagards,
Aby

Price updation for Finished goods

We are updating the std. price for the finished materials through Costing run t.code CK40N. But in the last month run the price of the materials has decreased because the client has used inhouse produced material in place of a imported material. The inhoused produced material carries a lesser price when compared to imported material. Because of this the stock valuation has gone down. Now we have to revise the price so that the stock value should go up. We have arrived at a price. How do we post the revised price, MR21 and MM02 does not work, what is the other alternative for this. Pls suggest very urgent.
Warm regards,
Jagdeesh.

Did you try MR22
Thanks
Ashok

Change of Costing Variant in Marking Allowance for CK24 price update

Dear All,
In CK24, price updation previously i had selected one costing variant for one particular material and released the standard price. Now, I am trying to do price update for a different material for which I used different costing variant for doing the material cost estimate. Now when I am going to Marking Allowance in CK24 for that particular company code the previous costing variant is only displaying. But now for the current material that is not the costing variant for which i need price updation. It is just displaying the old costing variant.
Please let me know how to change the costing variant for the same period.
Regards
Srikanth

Hi Srikanth,
1. IMG: Logistics - General, Retail Pricing
Define list variant and assign items
              Enhance or create a new list variant with list field VKP01
2. IMG: Logistics - General, Retail Pricing
Texts for list fields
              Adjust the text for the list field, for example, PP old
3. Define a new SD condition type ZEKA, for example as a copy of VKP0 (Transaction V/06)
              You can create this new condition either as a separate condition or if it is always determined together with, for example VKP0, you can define it as a condition supplement of VKP0. You achieve this by not assigning an access sequence to ZEKA but including it in the condition supplement schema (schema VKP000 in the standard system) instead. In addition, assign the supplement schema of the main condition (master data subscreen, for example schema VKP000). The main condition must be contained in the calculation schema used so that the condition supplements can be found.
4. Insert the new condition type ZEKA in the sales price calculation schema (Transaction V/08)
              Enhance the schema (assignment per pricing type) with the new condition ZEKA. In the standard system, we deliver schema WWS001 and WWS002. You can insert ZEKA at the end of the schema as a statistical condition.
5. IMG: Logistics - General, Retail Pricing
Control - control per list field, allowed costing levels
              For the sales price calculation schema used, you must set control parameters for the list fields EKPNN and VKP01.
List field EKPNN: In the lower subscreen (Saving list fields in master conditions) enter the new condition type ZEKA (application V). If the new condition type has an access sequence, that is, it is not used as a condition supplement, then you must specify in screen 'Allowed pricing levels' the condition tables in which ZEKA should be stored.
List field VKP01: In the mid subscreen (Transport calculating schema data for list field), specify ZEKA as SP condition type.
Note: if you want to send ZEKA for example in the assortment list as a condition, then you must also enhance the schema for calculating the sales price (VKP001, VKP002 or VKP003 in the standard system) with ZEKA.
If still not working ping me,
Regards,
Srinivas Muthyala

Relevant for Costing - Price Update

Hi,
SAP standard is offering Price Update for Inventory Costing through 'Relevant for Costing' against which price factors (50%, 75%, 25% etc.) is maintained.
1. We would like to use this to devalue the inventory values on a particular basis. What transaction do I need to execute to devalue.
2. I am using one material in BOM for SFG/FG, wherein I am entering the "Relevant for Costing' key. (50%). However, I am not able to see the result. The consumption is getting posted @ 100% rate and the cost of RM in FG is also 100%. It should have been 50% as per my understanding.
Am I missing any link. Please guide me to resolve this issue.

Hi Swapvik,
Pls check in your Costing Variant--> Valuation Variant --> Price Factors..
Here, Costing Relevancy is "X" for which you need to maintain your Price Factors. Pls check your entry and let me know..
Srikanth Munnaluri

Reversal of Cost Price Update and Price Change MR21

Dear SAP experts
Recently (on 1st of this month) i did cost price update for all my FIG items. Later i realized that some of FG items cost price was not accurate. So i want to delete cost price of those items and update price by using T code MR 21
When i try to cancel these items cost price by using T code CKR1, i am getting error message that particular material current or future standard price is avialable and i am unable to move further
Please guide how to delete current cost price of these items and update cost price by using MR21. Please note these items does not have any BOM and basically are contract manufacturing items
Thanks in advance

Hi Vedsai
When you use CKR1, it does not give error.. It just gives a warning message
Enter your Plant / Mat in CKr1 and select "Current cost estimate" or "Future Cost Estimate" as the case may be
If any warning comes, ignore it and press enter.... It should reverse the cost estimate
Now update from MR21 or preferably use CK11N again
Note: If at all it gives any error in CKR1, check in T code OPR4_CK if this msg can be converted into warning message
Regards
Ajay M

Settlement of partially delivered order

Dear all,
I have one question.
Can we settle the process order which is partially delivered?
Need your valuable suggestion.
Regards
Nilesh Joshi.

Hi
You can calculate the wip for partial delivered orders and the same may be settled to FI WIP ac debit and Change in invetory account will be credited and once complete the order you can reverse the wip and calculate the variances on the process order.
Regards
Madhav

Stop price update of delivered but un-invoiced (non-invoiced) line items

Hi Gurus,
I need some help regarding price update of line items which are delivered but not invoiced yet.
Case 1:
I am calling the FM 'BAPI_SALESORDER_CHANGE' and passing the line item (say 10) whose price needs to be updated. This line item is neither delivered nor invoiced. Result, correct change of price for line item 10.
Case 2:
In the above order, i am adding another line item (say 30), which is completely delivered, but I have not yet created an invoice for it. I want that this line item's price should not be changed (as delivery is already created for it). So, in my price update report, I check and filter this line item (10) and pass only line item 30 to the BAPI. Result: not only line item 30 but line item 10 also gets updated with new price!!
Case 3:
I created a new line item(40) and created an invoice for it after completely delivering it. When I call the BAPI now, I again filter the line items 30 and 40 and pass only line item 10 which i want to be updated.
Result:
Line item 10 - updated with new price
Line item 30 - updated with new price
Line item 40 - not updated
Requirement:
Any line item that is completely delivered should not be updated with the new price regardless of it having an invoice or not.
Assumptions:
I am running a custom report to find the line items that need change and calling the BAPI_SALESORDER_CHANGE and passing those line items to update the price.
Problem faced:
This process is updating all line items in the SO that are not invoiced regardless of weather I am passing it to the BAPI or not
As far as i know, the checking of the invoice is in some standard program, and hence had debugged the BAPI and got the FM SD_SALES_DOCUMENT_SAVE which in my opinion is doing the change. But on further debugging I lost track of the tables which were holding the data as the code is flowing through a number of user exits and standard forms.
Please help!

Hi Soumyo,
In Pricing Update screen, you will find pricing type X, Y and Z which you can use to define your own pricing update scenarios. Check OSS note 24832. This note provides enough details about each of the update pricing options and also explains on how to use pricing update X, Y, and Z. Let me know if you need any more help on this.
Thanks & Regards
Kapil Sharma
Author - Configuring SAP ERP Sales and Distribution

Price Condition&Price update are disabled in S.O even after partial invoice

Dear All,
We are using manual pricing condition in the Sales Order, when we do a partial delivery and billing for a Sales Order line item, the update prices function (button) is inactive and price conditions are greyed out.
We are using Pricing Type "C" in the VTFL item copy from Delivery to Billing.
Even after partial quantity invoicing from the Sales Order there will be pricing changes and users will need to enter manual price for the item that is partially invoiced.
Currently system does not allow any change in the manual price condition as the all the price conditions are greyed out in the S.O even if partial qty of the line item is invoiced.
Please let me know what needs to be done to enable manual condition entry and Price update functions in the Sales order even after partial invoice quantity of the line item in the Sales Order.
Regards
Venkat

Hai Venkat,
This is the standard functionality and system treat like
sales order conditions once invoiced should be freezed.
As a work around you can do like
in sales order order
Go to Item - Shipping
Part.dlv./item B Create only one delivery (also with quantity = 0)
Max.Part.Deliv. 1
This make only one delivery for the line item
Considering if you have a material Sales order of 2 KG and you added some manual price.
And you are doing partial delivery of 1 KG and Invoiced.
Now user can use the same sales order and create a new line item of the same material and can enter the balance qty and change the condition which is not grayed out.
Regards,
Mani

CK40N - Update for material with price control 'V'

i Experts,
When im running standard cost estimate in CK40N, say for material types semi finished. The components that is raw materials of the SFG is also updated with the price, meaning for a raw material with price control 'V' has a price of 10, after
releasing the cost estimate for the SFG, when i look into the material master of raw material, the price of 10 is also updated
in the standard price.
I am not sure why this is happening, i believe it should not happen. Because in the valuation variant, if i give the strategy as standard price, this price is easily picked up. And more over with price control 'V', i can change the standard price. Can anybody throw some light on this.
Best regards
gj

Hi Rakesh,
Thanks for the information. But i do agree even during release there is no impact on the inventory. But in my cost variant, say in PPC1, if i give the strategy say 1. standard price 2. moving average price, during cost estimate run, its going to take the standard price for the material irrespective of the price derived automatically for moving average price. For eg in our case for raw material with price control 'V' after sce run if the standard price is 10 and moving average price is 14, as per strategy of PPC1 above its going to take 10 and not 14.
Is there any other way to avoid this. Please correct me if i had went wrong somewhere.
Best regards
gj

Moving Average Price does not get updated for Project Stock

Hello Experts
We have an Engineer-to-Order implementation for our client. Accordingly procurement is done per project. Each Project issues its PRs which are then converted to POs and recieved into Project Stock.
While assigning the material to the Network activity in Project (using material component) the system uses the price found in the material master (MAP or STD) as a planned cost appended to the project.
Problem:
while procuring the material, when we receive it into Project Stock (Mvt 101 Q + ) the Moving Average Price in the material master does not get updated. this way all newly created material master will never have a moving average price, thus whenever we try to assign them to the project we receive an error message (Cost for Material Component ###Mat.Num### cannot be determined.
Question:
How can I get the system to update moving average price (for all types of stock) based on procurement for project stock.???
Your help is kindly appreciated.

I'm sorry for the confusion
Case:
The T-code is CJ20N Project Builder in PS module
we are assigning material components to network activities under a certain WBS element in the project.
there is a function in the Project Builder to calculate the cost of a network. it uses the costing variant assigned to the network which is PS02 (We get the error here)
The costing variant has a valuation variant which lists a series of strategies to get the material price. Planned 1 if not then STD if not then MAP. (you can choose between many options via a drop down menu) you can choose 5 consequent options.
The MAP that the valuation variant is coded to get is the Plant Stock MAP -- Or the Project Stock MAP but only Per WBS element.
The MAP that the Actual postings update is the Project Stock MAP only Per WBS element.
This means that if you use a material component to purchase material 123 Acc.As. Q for WBS X for 10 $ then you try to assign a new material component with the same material 123 to WBS Y, the system will not get a MAP. because it's stored in QBEW per WBS element.
This way the system will never get the MAP right.
However, we don't always use project stock to procure for projects, for some requirements we can assign and use plant stock as well for Projects. that way we need the MAP from plant stock.
In the Valuation Variant you can use a User Exit Strategy. The user exit's name is COPCP005
My Suggestion is:
Use the User Exit COPCP005 to calculate the { Total value / the total quantity (MAP) from QBEW + Total value / total quantity (MAP) from MBEW } / 2
which is the MAP for both plant and project stock together, since that we are going to use both.
Q: Is this correct !?

Updated Pricing for partly deliver sales order

Hi Expert,
System should allows to edit the pricing for partially proceed item.
Regards
BK GAIKWAD
M9881908615

Yes i know, but i have required to update pricing in sales order level if partly qty deliver.
because our user forgot the update pricing in billing document.
Regard
BK GAIKWAD

Price updation for Partial delivered case

Similar Messages

Maybe you are looking for