Pricing Header Condition Issue.

Dear Friends,
In the sales order we are using the header condition for distributing the values to the sales order line items 10, 20, 30u2026etc, if I have activated reason for rejections to line item 10, the header level condition value should not be shared to the line item 10,
Eg: Header Condition Value: 600, it is distributed to line item 10, 20, 30 on value basis, so the Values are Line Item u2013 10 = 200, 20 = 100, and 30 = 300.
Here If have activated Reason for rejection for line item 20, the header condition value 600/- should be distribute to line item 10 = 240, 30 = 360. Header condition value should not be distributed to Line item 20. it should be 0/-.
Friends please suggest me how to over come this issue.
Regards,
Hari Krishna

Check in your customization for the Reason for rejection that you are using in your sales order (I think the path is spro-sd-sales-Sls doc item-Reason for rejection.
The Statistical field in that should be X. If there is an X, then as soon as you reject line 20 with that Reason, the values would be redistributed to the other 2 remaining line items.

Similar Messages

  • Pricing Schema Header Condition Issue

    Dear gurus,
    how can I do this?
    Item 1:Sales Price:100 eurMWST:18eur
    Item 2:Sales Price:200 eurMWST:36eur
    In header:
    Sales Price: 300eur
    MWST:54eur
    Total:354eur
    There is a HEADER condition as YOFI:
    YOFI:355eur
    YODI=YOFI-TOTAL
    Problem is SAP multiples YOFI(which is header condition) to items.
    As a result calculation is wrong.
    How can I fix it?
    Regards,

    You don't want YOFI to be distributed to items correct? If so, then in t.code V/06, for condition type YOFI, remove the checks in the boxes of group condition,item condition, quantity and check by creating a new sales order.
    Regards,

  • Pricing Header Condition.

    Hello everyone,
    I want to a add header condition and if I enter any values in there, system should allocate the value to all the line items based on the netprice of each item.
    Currently I have the following config in V/06:
    Condition Class: A
    Condition Category : B (fixed amount )
    Group Condition: checked,
    Header Condition: Checked.
    The sales document is invoice correctoin request.
    Currently what happens is, if I enter 300 at header, system allocates the whole $300 to only one item. That is, it adds the amount $300 to a line that have highest net value. I want that amount to be distributed among the line items.
    Thanks in advance,

    The sales document is invoice correctoin request.
    As you said Sales documet is invoice correction request , there will be two line items created allways in inovice correction request. first is Credit and other is Debit line item.
    Invoice correction request will be created with ref to Invoice. ex : for wrong prices., please look into below SAP link
    [Invoice correction request|http://help.sap.com/saphelp_erp60_sp/helpdata/en/70/a7853478616434e10000009b38f83b/frameset.htm]
    Regards,
    Ramesh

  • Pricing: header condition with condition value formula

    Hi,
    can anyone helps us on the following topic:
    - is it possible to enter a conditon value formula for a header condition?
    We have created a formula, but it is only executed when we enter the condition on item level.
    Our condition settings are:
    Cond. class - A
    Calculat. type - G
    Group condition - X
    Header condition - X
    Item Condition - X
    thanks in advance!

    Hello,
    we have a breakpoint at the beginning of the formula.
    If we enter the condition at item level we reach the breakpoint otherwise (when entering on header level) not.
    The question now is, if this is due to configuration settings on condition type or within calculation procedure - or if it is just impossible to have a conditon value formula for a header condition.
    thanks

  • Can pricing requirement be used for manual header condition

    I have a manual header condition ZCR1 which will be entered in a sales document with doc type ZAB1. When this sales document is copied into another sales document ZAB2, I want that the manual header condition ZCR1 is not determined. Can I do this via pricing requirement? Or should I use alternation formula for condition base value and make the value of condition ZCR1 to zero when the document is copied into ZAB2.
    Both the document types are using the same pricing procedure. In copy control for all item categories from ZAB1 to ZAB2, pricing type G (Copy pricing elements unchanged and re-determine taxes). ZCR1 is a manual condition in the pricing procedure used.
    Regards
    Javed

    Hi javed
    If you want the ZCR1 manual header condition should not be determined then you need to change the pricing type in the copy control but if you assign a requirement in the pricing procedure for ZCR1 condition type  then you cant enter the ZCR1 condition type manually also as you are not meeting your requirement.
    Another option is you have to create a new requirement with the help of Technical consultant ans assign it to the  header condition type in the pricing procedure requirement feild . giving inputs to your Technical consultant that The condition type  should not be determined
    Regards
    Srinath

  • Pricing procedure for Header conditions in RFQ

    All SAP Gurus,
    From where system picks up the pricing procedure for header conditions for request for Quotation (RFQ) maintenance?
    Regards,

    Purchase order which you have defined for maket price determination.
    spro>MM>purchasing>conditions->define pricing determination procedure --->define calculation schema
    Regards
    Antony

  • Header Conditions in Pricing

    Dear All,
    I want to add header conditions (Freight, Insurance and landing Charges) in import pricing. The calculation type is percentage for these conditions.
    I want to distribute that condition value on the basis value of each line item.
    If there are 4 line item in PO
    Item     Amount     Header Amount     
    10     500     ZFRG  500     
    20     1000     ZINS   800     
    30     800     Landing 1500     
    40     1500          
    Distribution of FRG,INS and Landing  charges should be as per value of line item i.e more amount should post to line item 40
    as it is having more value.
    Thanks and Regards.
    Prakash

    Thx Sandeep
    It is distributing the amount on quantity basis, I want that on value basis.
    Suppose I am having 2 line item with value 100 and second line item with value 500. Quantity for these items are 10 and 1.
    I.e for line item 2 quantity is 1 but value is more here i want to post more amount of FRG to line item 1.
    Best Regards.
    Prakash

  • In Invoice header conditions pricing values updated as u201C0u201D

    Dear guruu2019s
    I am facing the below error can any please suggest me on the same.
    We have created the sales order with 3 line items and we have created 3 individual deliveries and 3 different invoices but for the 1st sales order line item we observed that at invoice level the pricing conditions are not updated at header level the values are u201C0u201D. But the same has been update at sales order level and rest off the 2 sale order (2&3) line items all the invoice has been updated properly.
    Dear guru can any one suggest what all reasons that will impact our header condition to update the values as 0
    Regards,
    Bhanu

    Dear Guru's
    This is in continuous of the above mail
    We observed that in the invoice item level in pricing tab Statistical values field has been updated as option Y- No cumulating- value can be used statistically. If the option is u2013 System will copy item to header totals then automatically the pricing values gets updated in the Header condition tab.
    Here my doubt is how system updates this value. If I would like to change the same it is in grayed out mode. Please suggest me the same
    Regards,
    Bhanu Prathap

  • Automatic Pricing for Header condition

    Hello,
    We have the following scenario.
    For an specific Sales Order type we need to charge (surcharge or a fee) a fix $$ amount at the header level. This amount should be charged only if the total value of the order is less then a fixed $$ amount.
    Also another condition is for a specific material group we need to charge a fix $$ amount and if this condition is selected then the other condition should not be selected.
    Eg:
    1) for all material with Material group AB we want to charge(via condition type) 100$ at the header level.
    we want this automatically at the header.
    2) For all Order type OR we want to charge(I will maintain a condition type) 200$ if the net value of that sales order is less then 5000$. This is not item specific but at the Order header level.
    We dont want to manually enter the condition type (surcharge).
    I know that for Header conditions we cannot have access sequence and condition records. Then how can the 100$ or 200$ charge condition type come automatically in the Sales Order if the total order value is less then 5000$.
    I can have a requirement but what about the condition Record and the access sequence for the Order type or the material group?
    Any Ideas?
    Thanks
    SAP Fan

    hello, friend.
    i have an hypothesis (which is merely a guess because i have not tried this recently), that it is possible to do this, but you have make your condition type both header and item, which means you get to assign an access sequence (enabling condition records).  but you must also "tick" the "group condition" in the condition type so that even if this is entered at item level, this applies to the entire document and will be distributed to the items.
    the group condition is supposed to be used for manually entered header conditions such as pallet discounts, and i think i might have done this for material groups, but do not recall if i've done this for order type or any other variable at one point.  please do us a favor and test it, and post your findings.
    regards!!!
    Edited by: jonathan y on Jun 1, 2009 3:08 PM

  • To define a Header condition in pricing !!!

    Hi guys ,
    I would like to know,how do we set the condition type as header .
    Does marking the header condition checkbox in Changes which can be made screen , sets the condition type as header condition ?
    Or do we need to make any other settings ?
    Thanks
    Dona

    Lakshmipathi,
    Thanks a lot for your answer.I got confused because...
    I have a freigth condition with ... Header condition field checked, Item condition field checked,Group Condition field checked and we maintain access sequence for it
    Means its a header condition,its a item condion, its a group condition and we have access sequence maintained for it.
    I understand that this should not be the case ideally,but I donot know as to why this condition type was configured like this.
    1.Can you give some idea about how system will behave in this case..
    2. What is the effect of Amount/percent  field in condition type ? Because this field is also checked,
    but I cannot maintain condition records with % UoM  in VK11 ,I can maintan only $ amount.Is there any other use of this field ?
    fyi,
    Calculation type is fixed amount ( B )
    Thanks
    Dona

  • VA02 - Header Condition Tab - Pricing Authorization

    Dear all
    One of my requirement is that, In Sales Order VA02, VA03, VA01  - in Header level Condition tab - I want to hide the Cost Price line only.
    I am able to do that Detail (Item level).
    But header level, it shows the Cost Price.
    Can someone hlep me, how to configure that not to display it based on authorization
    Regards,
    Venkat

    Hi
    Maintain the condition type as header condition as well in SPRO -MM - Purchasing - Conditions - define condition types.
    If you want it to be called in PO automatically then remove tick marks - required and mandatory in calculation schema for that vendor.
    thanks

  • Why we cant have access sequence for header condition ?

    hi ,
    i have one query in pricing.
    Can we assign access sequence for header condition ? if yes how ?
    if not why ? please explain

    Hi there,
    It is always possible to have work around to solve issue without refer to OSS to change any programming coding.
    We want to have a freight charge appear on each sales order automatically according to some condition. Most of the time, this freight charge is a flat rate (if it is depend on qty or value, then we're so easy to set it in item level).
    In order to do so, we'll have one assumption. The item line number of sales order is auto running number, like 10, 20 and etc created by system and not manually input.
    Then we create a pricing condition type like other discount or charge in ITEM LEVEL with your selected condition like customer, sales office, country and etc. However, remember to add the sales item line as part of the condition of this pricing condition.
    Update the pricing procedure and create price condition record with say "10" for the sales item line. Since you'll have line number 10 for all sales order as first line (no mater it is a free of charge item or not). This new condition will generate a "freight cost" in the pricing procedure. And it is only apply to first line, therefore, we only get once of this charge for one order.
    Hope this is your case and it works with ours.
    Michael

  • Header Conditions Screen in Sales Order

    Hi!!,
    The issue is related to the fact that all the calculations are correct but the way it shows the prices at header and Item conditions screen is different.
    We mostly have Item pricing and the schema of the Pricing Procedure is such that it has group of conditions types like Base Price, Discount, Surcharges, Freight, taxes . After each of those condition types there is subtotal which have been assigned to the standard KOMP KZWI1-6 .
    On the Item condition screen every price including the one coming from condition type and one which flows to the subsequent subtotal is properly seen  but when it comes to Header Conditions screen the Subtotal 1 which is Base Price Subtotal is showing zero.The Base Price condition type though comes with the correct amount(FYI - The base Price Condition Type is a Price Condition).Surprisingly all the other subtotals like the ones for Discount and surcharges are seen with the respective condition types with correct amounts.
    The final total though is again correct.
    Can anybody tell why does it behave this way...Is it standard SAP function?
    Helpful answers would be handsomely rewarded.
    Thanks/Ani

    Hi,
    Do you have any user exit implemented, normally this not the standard behaviour, my experince is that the behaviour will be changed due to user exit.
    Regards,
    Murali

  • Header condition disabled in RFQ

    Hi all,
    1. In RFQ document header and item condition are not in active.
    When i go to RFQ header --> Conditions ( it is disabled )
    Similarly RFQ item --> conditions ( it is disabled )
    2. In Quotation i cannot enter the header conditions , i can enter the item condition but system is not picking the Schema which is assigned to the vendor. By default system is taking  the other condition types like P000 etc.
    Can any one suggest me both the above mentioned issues.
    Regards
    GSG

    Hi,
    please check your RFQ document type first in the customizing:
    Transaction "SPRO >>                
    materials management >> Purchasing >> RFQ/Quotation >> Define Document         
    Types"  - was the flag for   "time-dependent conditions" set for the concrete document type?                                                                               
    When you use time-dependent conditions, you have to maintain                   
    for your relevant condition type in pricing procedure for        
    condition supplements (RM0001) in the Path "SPRO >> materials management       
    >> purchasing >> conditions >> define price determination process >>           
    define condition types.      
    SPRO >> materials management >> purchasing >> conditions >> define price      
    determination process >> Define Calculation Schema                                                                               
    Procedure            RM0001 Condition Supplement Header                       
    like:                                                                               
    1  3 RA01 Discount % on Gross                                                 
    10 1 RA00 Discount % on Net                                                   
    10 2 ZA00 Surcharge % on Net                                                  
    10 4 ZA01 Surcharge % on Gross                                                                               
    It is required to maintain a pricing procedure for condition supplements.      
    Regards,
    Edit

  • Header Condition HD00?

    have a problem in pricing calculation. I have a header condition HD00, but
    the system makes the calculation not only in header, but in item level,
    wich gives me a wrong value. I want the Header Condition to Calculate only at Header Level and not to get distributed at Item Level. What config. do I need to do for solving this issue ?
    Regards,
    Binayak

    If the condition type is configured as a header condition, it will
    1. either duplicate that value in all the items
    2. or split the value entered in the header to all the items, based on whether the Group condition checkbox is ticked or not in the condition type.
    It is not possible to have the value at only the header level and not at item level. If you want the values to be updated only for specific items, then may be you can enable that by means of routine, but not having the value in any of the items is not possible
    Reward if this helps.

Maybe you are looking for