Primary Index is not Active in Database

Dear Experts,
   I have created a ztable and transported it to production server. But in Production server the primary index is missing. When i checked in it in development and quality server it exist there but not in production. I have tried to activate through SE14 but it is not activating . Can you please suggest a procedure to activate it. Waiting for your suggestion.
Regards,
Venkat.

posted in abap dictionary

Similar Messages

  • Primary index does not exist in database but shows in SE14?

    I added a couple of key fields to a Z table and activated it. Every thing went well - adjusted it with SE14 also.
    When I checked the Runtime object - it is OK.
    When I checked Database Object, it is showing that the Primary Index does not exist in Database but SE14 says that the Priamry Index exists in Database.
    Please advise how to correct this. I saw another psoting when I searched per this error message: "Indexes: Inconsistent with DDIC source" . It tells to create this index at Database but need to know the steps.
    pl advise.
    (reposting here)
    Edited by: Venkatabby on Mar 26, 2008 4:05 PM

    hi,
    To create a index for a table,
    go to se11->click on Indexes tab and create  a primary index.
    Indexes speed up data selection from the database. They consist of selected fields of a table, of which a copy is then made in sorted order. If you specify the index fields correctly in a condition in the WHERE or HAVING clause, the system only searches part of the index (index range scan).
    The system automatically creates the primary index. It consists of the primary key fields of the database table. This means that for each combination of fields in the index, there is a maximum of one line in the table. This kind of index is also known as UNIQUE.
    If you cannot use the primary index to determine the result set because, for example, none of the primary index fields occur in the WHERE or HAVINGclauses, the system searches through the entire table (full table scan). For this case, you can create secondary indexes, which can restrict the number of table entries searched to form the result set.
    You create secondary indexes using the ABAP Dictionary. There you can create its columns and define it as UNIQUE.
    reward points if useful.
    regards
    sandhya

  • Warning: Index does not exist in database system MSSQL

    Hi,
    After activating the Index from SE11,
    I receive the following Warning:
    Index does not exist in database system MSSQL.
    What does this mean? Has performance been increased or does the index 1st have to exist in the database system MSSQL?

    When you create index at SE11 and you need activate database utility.
    utilitities-database utility->then click activate and adjust database.
    else you can use SE14 and so that Index will create databse level.
    Reward Points if it is helpful
    Thanks
    Seshu

  • Index does not exist in database system ORACLE??????

    Hi Experts,
    I created a Secondary Index in DEV, its fine and the message is,
    <b><i>Index KNA1~Z01 exists in database system ORACLE</i></b>
    I moved it to TEST and there I got the message is like,
    <i><b>Index does not exist in database system ORACLE</b></i>
    So,
    1 - Wht I hv to do now? Shuld I see BASIS people?
    2- Why its happened like that? Coz of not enough space?
    ThanQ.

    thanq sudheer,
    I got the return code as 4, so Can I go for creation of new request and there by moving to test?
    1 - Anyways, so, after Activating Seconadyr Index, Shuld I come back and Do I need to activate the Table also?
    or
    2- Just activating the index is enough?
    thanq.
    Message was edited by:
            Srikhar

  • Index does not exist in database system DB6 sap

    Hi All
    In development system i have added a field into already existing  index and activated successfully without any errors or warnings and after transported the TR  into Quality system,In Quality system it shows the warning Index does not exist in database system DB6 sap
    Thanks
    Vamsi

    Hi Mohan,
    After any change in the existing structure of the table you need to adjust and then activate it.
    It can be done using SE14 tcode, please try using this.
    Regards,
    Mohammed

  • Index Does Not Exist In Database System MSSQL

    Hello,
    I have an Index that has this message:
    " Index Does Not Exist In Database System MSSQL"
    Can someone guide me how to update Index to the database?
    Thank you.

    Check this thread:
    missing primary index
    Otherwise, a few more informations would help! Thanks.

  • Index does not exist in database system DB6

    Hi,
    Problem : <b>Index does not exist in database system DB6</b>.
    I need further explanation why when i transport index from Development Client to Production Client the index is active but does not exist in database system DB6.
    So when the cases is occurs i must re-create the index again in Production Level...
    Can someone give me some ideas?
    Thanks.

    Hi,
    it might be due to some BUG in RDBMS...
    First Check the Secondary index in TEST system
    Look at the Transport Number in DEV system, If this is having error, then it will show you the error details also,
    If that not moved Properly then you need to create another request for the INDEX and move it again
    See the threads with similar problem...
    Warning: Index does not exist in database system MSSQL
    Index does not exist in database system ORACLE??????
    Re creation of database index
    Hope it will solve your problem...
    <b>Reward Points if useful</b>
    Thanks & Regards
    ilesh 24x7

  • BACKUP LOG suddenly failed with Msg 35250, Level 16, State 11 The connection to the primary replica is not active. The command cannot be processed.

    I have AlwaysOn SQL 2012 Enterprise set-up using Windows Failover Clustering Services (not FCI), and have 1 Primary node (P), 1 Synchronous Commit Auto Failover (SC), and 1 Asynchronous Commit Manual Failover (AC) node.  It is set up to prefer secondary,
    with the highest priority given to AC node.
    I am using Ola Hollengren's scripts for Database Maintenance jobs, including a native BACKUP LOG job for the transaction logs of all user databases on a 1 minute schedule.  His scripts already consider AlwaysOn, and although the job is set-up on all
    3 nodes, only ever runs on AC node.
    The job has been running successfully since initial set-up almost 1 year ago, but suddenly yesterday morning started to fail with the following error, only on 1 of the 13 databases in my availability group:
    Date and time: 2014-06-08 09:36:11
    Command: BACKUP LOG [my_db] TO DISK = N'E:\MSSQL\\Transaction Dumps\my_db\MySQLCL$MySQLAG_my_db_20140608_093610_U_LOG.trn' WITH CHECKSUM, COMPRESSION
    Msg 35250, Level 16, State 11, Server AC, Line 1
    The connection to the primary replica is not active.  The command cannot be processed.
    Msg 3013, Level 16, State 1, Server AC, Line 1
    BACKUP LOG is terminating abnormally.
    Outcome: Failed
    Duration: 00:01:00
    The other 12 databases continued to backup successfully.
    Checking the Availability Group dashboard, windows event logs, and SQL Server error logs, including Failover Cluster events showed no issues.
    However, monitoring software (Idera SQLdm) showed blocked sessions on P node.  When I ran sp_who2, it showed that a background process was being blocked by another background process with an HADR BACKUP LOCK.
    Since both processes were background processes, I was unable to kill either process.  I temporarily disabled the transaction log backup job, but the blocked process was still active.
    I ran DBCC CHECKDB (my_db) WITH all_errormsgs, no_infomsgs, data_purity on both P and AC nodes, with no errors.  However, on AC node, it also showed 1 transaction rolled forward and 0 transactions rolled back.  This also had the effect of releasing
    the blocked background process, but another background process was now blocking with the same HADR BACKUP LOCK.
    I tried to restart SQL Server Agent on AC node, which did not immediately seem to work.  However, after a few minutes, I noticed that the block had disappeared.  I re-enabled the transaction log backup job on AC and it started working normally
    again.  The error has not occurred again, but I am at a loss as to what happened, and how to prevent it from happening again.
    Any help would be greatly appreciated.
    Diane

    And here is part 2 of the stored procedure:
    --// Execute backup commands //--
    WHILE EXISTS (SELECT * FROM @tmpDatabases WHERE Selected = 1 AND Completed = 0)
    BEGIN
    SELECT TOP 1 @CurrentDBID = ID,
    @CurrentDatabaseName = DatabaseName,
    @CurrentDatabaseNameFS = DatabaseNameFS,
    @CurrentDatabaseType = DatabaseType
    FROM @tmpDatabases
    WHERE Selected = 1
    AND Completed = 0
    ORDER BY ID ASC
    SET @CurrentDatabaseID = DB_ID(@CurrentDatabaseName)
    IF DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') = 'ONLINE'
    BEGIN
    IF EXISTS (SELECT * FROM sys.database_recovery_status WHERE database_id = @CurrentDatabaseID AND database_guid IS NOT NULL)
    BEGIN
    SET @CurrentIsDatabaseAccessible = 1
    END
    ELSE
    BEGIN
    SET @CurrentIsDatabaseAccessible = 0
    END
    END
    ELSE
    BEGIN
    SET @CurrentIsDatabaseAccessible = 0
    END
    SELECT @CurrentDifferentialBaseLSN = differential_base_lsn
    FROM sys.master_files
    WHERE database_id = @CurrentDatabaseID
    AND [type] = 0
    AND [file_id] = 1
    -- Workaround for a bug in SQL Server 2005
    IF @Version >= 9 AND @Version < 10
    AND EXISTS(SELECT * FROM sys.master_files WHERE database_id = @CurrentDatabaseID AND [type] = 0 AND [file_id] = 1 AND differential_base_lsn IS NOT NULL AND differential_base_guid IS NOT NULL AND differential_base_time IS NULL)
    BEGIN
    SET @CurrentDifferentialBaseLSN = NULL
    END
    SELECT @CurrentDifferentialBaseIsSnapshot = is_snapshot
    FROM msdb.dbo.backupset
    WHERE database_name = @CurrentDatabaseName
    AND [type] = 'D'
    AND checkpoint_lsn = @CurrentDifferentialBaseLSN
    IF DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') = 'ONLINE'
    BEGIN
    SELECT @CurrentLogLSN = last_log_backup_lsn
    FROM sys.database_recovery_status
    WHERE database_id = @CurrentDatabaseID
    END
    SET @CurrentBackupType = @BackupType
    IF @ChangeBackupType = 'Y'
    BEGIN
    IF @CurrentBackupType = 'LOG' AND DATABASEPROPERTYEX(@CurrentDatabaseName,'Recovery') <> 'SIMPLE' AND @CurrentLogLSN IS NULL AND @CurrentDatabaseName <> 'master'
    BEGIN
    SET @CurrentBackupType = 'DIFF'
    END
    IF @CurrentBackupType = 'DIFF' AND @CurrentDifferentialBaseLSN IS NULL AND @CurrentDatabaseName <> 'master'
    BEGIN
    SET @CurrentBackupType = 'FULL'
    END
    END
    IF @CurrentBackupType = 'LOG'
    BEGIN
    SELECT @CurrentLatestBackup = MAX(backup_finish_date)
    FROM msdb.dbo.backupset
    WHERE [type] IN('D','I')
    AND is_damaged = 0
    AND database_name = @CurrentDatabaseName
    END
    IF @Version >= 11 AND @Cluster IS NOT NULL
    BEGIN
    SELECT @CurrentAvailabilityGroup = availability_groups.name,
    @CurrentAvailabilityGroupRole = dm_hadr_availability_replica_states.role_desc
    FROM sys.databases databases
    INNER JOIN sys.availability_databases_cluster availability_databases_cluster ON databases.group_database_id = availability_databases_cluster.group_database_id
    INNER JOIN sys.availability_groups availability_groups ON availability_databases_cluster.group_id = availability_groups.group_id
    INNER JOIN sys.dm_hadr_availability_replica_states dm_hadr_availability_replica_states ON availability_groups.group_id = dm_hadr_availability_replica_states.group_id AND databases.replica_id = dm_hadr_availability_replica_states.replica_id
    WHERE databases.name = @CurrentDatabaseName
    END
    IF @Version >= 11 AND @Cluster IS NOT NULL AND @CurrentAvailabilityGroup IS NOT NULL
    BEGIN
    SELECT @CurrentIsPreferredBackupReplica = sys.fn_hadr_backup_is_preferred_replica(@CurrentDatabaseName)
    END
    SELECT @CurrentDatabaseMirroringRole = UPPER(mirroring_role_desc)
    FROM sys.database_mirroring
    WHERE database_id = @CurrentDatabaseID
    IF EXISTS (SELECT * FROM msdb.dbo.log_shipping_primary_databases WHERE primary_database = @CurrentDatabaseName)
    BEGIN
    SET @CurrentLogShippingRole = 'PRIMARY'
    END
    ELSE
    IF EXISTS (SELECT * FROM msdb.dbo.log_shipping_secondary_databases WHERE secondary_database = @CurrentDatabaseName)
    BEGIN
    SET @CurrentLogShippingRole = 'SECONDARY'
    END
    -- Set database message
    SET @DatabaseMessage = 'Date and time: ' + CONVERT(nvarchar,GETDATE(),120) + CHAR(13) + CHAR(10)
    SET @DatabaseMessage = @DatabaseMessage + 'Database: ' + QUOTENAME(@CurrentDatabaseName) + CHAR(13) + CHAR(10)
    SET @DatabaseMessage = @DatabaseMessage + 'Status: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') AS nvarchar) + CHAR(13) + CHAR(10)
    SET @DatabaseMessage = @DatabaseMessage + 'Standby: ' + CASE WHEN DATABASEPROPERTYEX(@CurrentDatabaseName,'IsInStandBy') = 1 THEN 'Yes' ELSE 'No' END + CHAR(13) + CHAR(10)
    SET @DatabaseMessage = @DatabaseMessage + 'Updateability: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'Updateability') AS nvarchar) + CHAR(13) + CHAR(10)
    SET @DatabaseMessage = @DatabaseMessage + 'User access: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'UserAccess') AS nvarchar) + CHAR(13) + CHAR(10)
    SET @DatabaseMessage = @DatabaseMessage + 'Is accessible: ' + CASE WHEN @CurrentIsDatabaseAccessible = 1 THEN 'Yes' ELSE 'No' END + CHAR(13) + CHAR(10)
    SET @DatabaseMessage = @DatabaseMessage + 'Recovery model: ' + CAST(DATABASEPROPERTYEX(@CurrentDatabaseName,'Recovery') AS nvarchar) + CHAR(13) + CHAR(10)
    IF @CurrentAvailabilityGroup IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Availability group: ' + @CurrentAvailabilityGroup + CHAR(13) + CHAR(10)
    IF @CurrentAvailabilityGroup IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Availability group role: ' + @CurrentAvailabilityGroupRole + CHAR(13) + CHAR(10)
    IF @CurrentAvailabilityGroup IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Is preferred backup replica: ' + CASE WHEN @CurrentIsPreferredBackupReplica = 1 THEN 'Yes' WHEN @CurrentIsPreferredBackupReplica = 0 THEN 'No' ELSE 'N/A' END + CHAR(13) + CHAR(10)
    IF @CurrentDatabaseMirroringRole IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Database mirroring role: ' + @CurrentDatabaseMirroringRole + CHAR(13) + CHAR(10)
    IF @CurrentLogShippingRole IS NOT NULL SET @DatabaseMessage = @DatabaseMessage + 'Log shipping role: ' + @CurrentLogShippingRole + CHAR(13) + CHAR(10)
    SET @DatabaseMessage = @DatabaseMessage + 'Differential base LSN: ' + ISNULL(CAST(@CurrentDifferentialBaseLSN AS nvarchar),'N/A') + CHAR(13) + CHAR(10)
    SET @DatabaseMessage = @DatabaseMessage + 'Differential base is snapshot: ' + CASE WHEN @CurrentDifferentialBaseIsSnapshot = 1 THEN 'Yes' WHEN @CurrentDifferentialBaseIsSnapshot = 0 THEN 'No' ELSE 'N/A' END + CHAR(13) + CHAR(10)
    SET @DatabaseMessage = @DatabaseMessage + 'Last log backup LSN: ' + ISNULL(CAST(@CurrentLogLSN AS nvarchar),'N/A') + CHAR(13) + CHAR(10)
    SET @DatabaseMessage = REPLACE(@DatabaseMessage,'%','%%') + ' '
    RAISERROR(@DatabaseMessage,10,1) WITH NOWAIT
    IF DATABASEPROPERTYEX(@CurrentDatabaseName,'Status') = 'ONLINE'
    AND NOT (DATABASEPROPERTYEX(@CurrentDatabaseName,'UserAccess') = 'SINGLE_USER' AND @CurrentIsDatabaseAccessible = 0)
    AND DATABASEPROPERTYEX(@CurrentDatabaseName,'IsInStandBy') = 0
    AND NOT (@CurrentBackupType = 'LOG' AND (DATABASEPROPERTYEX(@CurrentDatabaseName,'Recovery') = 'SIMPLE' OR @CurrentLogLSN IS NULL))
    AND NOT (@CurrentBackupType = 'DIFF' AND @CurrentDifferentialBaseLSN IS NULL)
    AND NOT (@CurrentBackupType IN('DIFF','LOG') AND @CurrentDatabaseName = 'master')
    AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'FULL' AND @CopyOnly = 'N' AND (@CurrentAvailabilityGroupRole <> 'PRIMARY' OR @CurrentAvailabilityGroupRole IS NULL))
    AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'FULL' AND @CopyOnly = 'Y' AND (@CurrentIsPreferredBackupReplica <> 1 OR @CurrentIsPreferredBackupReplica IS NULL))
    AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'DIFF' AND (@CurrentAvailabilityGroupRole <> 'PRIMARY' OR @CurrentAvailabilityGroupRole IS NULL))
    AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'LOG' AND @CopyOnly = 'N' AND (@CurrentIsPreferredBackupReplica <> 1 OR @CurrentIsPreferredBackupReplica IS NULL))
    AND NOT (@CurrentAvailabilityGroup IS NOT NULL AND @CurrentBackupType = 'LOG' AND @CopyOnly = 'Y' AND (@CurrentAvailabilityGroupRole <> 'PRIMARY' OR @CurrentAvailabilityGroupRole IS NULL))
    AND NOT ((@CurrentLogShippingRole = 'PRIMARY' AND @CurrentLogShippingRole IS NOT NULL) AND @CurrentBackupType = 'LOG')
    BEGIN
    -- Set variables
    SET @CurrentDate = GETDATE()
    IF @CleanupTime IS NULL OR (@CurrentBackupType = 'LOG' AND @CurrentLatestBackup IS NULL) OR @CurrentBackupType <> @BackupType
    BEGIN
    SET @CurrentCleanupDate = NULL
    END
    ELSE
    IF @CurrentBackupType = 'LOG'
    BEGIN
    SET @CurrentCleanupDate = (SELECT MIN([Date]) FROM(SELECT DATEADD(hh,-(@CleanupTime),@CurrentDate) AS [Date] UNION SELECT @CurrentLatestBackup AS [Date]) Dates)
    END
    ELSE
    BEGIN
    SET @CurrentCleanupDate = DATEADD(hh,-(@CleanupTime),@CurrentDate)
    END
    SELECT @CurrentFileExtension = CASE
    WHEN @BackupSoftware IS NULL AND @CurrentBackupType = 'FULL' THEN 'bak'
    WHEN @BackupSoftware IS NULL AND @CurrentBackupType = 'DIFF' THEN 'bak'
    WHEN @BackupSoftware IS NULL AND @CurrentBackupType = 'LOG' THEN 'trn'
    WHEN @BackupSoftware = 'LITESPEED' AND @CurrentBackupType = 'FULL' THEN 'bak'
    WHEN @BackupSoftware = 'LITESPEED' AND @CurrentBackupType = 'DIFF' THEN 'bak'
    WHEN @BackupSoftware = 'LITESPEED' AND @CurrentBackupType = 'LOG' THEN 'trn'
    WHEN @BackupSoftware = 'SQLBACKUP' AND @CurrentBackupType = 'FULL' THEN 'sqb'
    WHEN @BackupSoftware = 'SQLBACKUP' AND @CurrentBackupType = 'DIFF' THEN 'sqb'
    WHEN @BackupSoftware = 'SQLBACKUP' AND @CurrentBackupType = 'LOG' THEN 'sqb'
    WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'FULL' AND @Encrypt = 'N' THEN 'hbc'
    WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'DIFF' AND @Encrypt = 'N' THEN 'hbc'
    WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'LOG' AND @Encrypt = 'N' THEN 'hbc'
    WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'FULL' AND @Encrypt = 'Y' THEN 'hbe'
    WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'DIFF' AND @Encrypt = 'Y' THEN 'hbe'
    WHEN @BackupSoftware = 'HYPERBAC' AND @CurrentBackupType = 'LOG' AND @Encrypt = 'Y' THEN 'hbe'
    WHEN @BackupSoftware = 'SQLSAFE' AND @CurrentBackupType = 'FULL' THEN 'safe'
    WHEN @BackupSoftware = 'SQLSAFE' AND @CurrentBackupType = 'DIFF' THEN 'safe'
    WHEN @BackupSoftware = 'SQLSAFE' AND @CurrentBackupType = 'LOG' THEN 'safe'
    END
    INSERT INTO @CurrentDirectories (ID, DirectoryPath, CreateCompleted, CleanupCompleted)
    SELECT ROW_NUMBER() OVER (ORDER BY ID), DirectoryPath + CASE WHEN RIGHT(DirectoryPath,1) = '\' THEN '' ELSE '\' END + CASE WHEN @CurrentBackupType = 'LOG' THEN '\Transaction Dumps\' + @CurrentDatabaseNameFS ELSE '' END, 0, 0
    FROM @Directories
    ORDER BY ID ASC
    SET @CurrentFileNumber = 0
    SET @CurrentMirrorFilePath = NULL
    WHILE @CurrentFileNumber < @NumberOfFiles
    BEGIN
    SET @CurrentFileNumber = @CurrentFileNumber + 1
    SELECT @CurrentDirectoryPath = DirectoryPath
    FROM @CurrentDirectories
    WHERE @CurrentFileNumber >= (ID - 1) * (SELECT @NumberOfFiles / COUNT(*) FROM @CurrentDirectories) + 1
    AND @CurrentFileNumber <= ID * (SELECT @NumberOfFiles / COUNT(*) FROM @CurrentDirectories)
    SET @CurrentFilePath = @CurrentDirectoryPath + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + @CurrentDatabaseNameFS + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
    IF LEN(@CurrentFilePath) > 257
    BEGIN
    SET @CurrentFilePath = @CurrentDirectoryPath + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + LEFT(@CurrentDatabaseNameFS,CASE WHEN (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) < 20 THEN 20 ELSE (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) END) + '...' + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
    END
    IF @CurrentFileNumber = 1 AND LEN(@MirrorDirectory) > 0
    BEGIN
    SET @CurrentMirrorFilePath = @MirrorDirectory + CASE WHEN RIGHT(@MirrorDirectory,1) = '\' THEN '' ELSE '\' END + CASE WHEN @CurrentBackupType = 'LOG' THEN '\Transaction Dumps\' + @CurrentDatabaseNameFS ELSE '' END + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + @CurrentDatabaseNameFS + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
    IF LEN(@CurrentFilePath) > 257
    BEGIN
    SET @CurrentMirrorFilePath = @MirrorDirectory + CASE WHEN RIGHT(@MirrorDirectory,1) = '\' THEN '' ELSE '\' END + CASE WHEN @CurrentBackupType = 'LOG' THEN '\Transaction Dumps\' + @CurrentDatabaseNameFS ELSE '' END + '\' + CASE WHEN @CurrentAvailabilityGroup IS NOT NULL THEN @Cluster + '$' + @CurrentAvailabilityGroup ELSE REPLACE(CAST(SERVERPROPERTY('servername') AS nvarchar),'\','$') END + '_' + LEFT(@CurrentDatabaseNameFS,CASE WHEN (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) < 20 THEN 20 ELSE (LEN(@CurrentDatabaseNameFS) + 257 - LEN(@CurrentFilePath) - 3) END) + '...' + '_' + REPLACE(REPLACE(REPLACE((CONVERT(nvarchar,@CurrentDate,120)),'-',''),' ','_'),':','') + CASE WHEN @NumberOfFiles > 1 AND @NumberOfFiles <= 9 THEN '_' + CAST(@CurrentFileNumber AS nvarchar) WHEN @NumberOfFiles >= 10 THEN '_' + RIGHT('0' + CAST(@CurrentFileNumber AS nvarchar),2) ELSE '' END + '_' + @CurrentDatabaseType + '_' + UPPER(@CurrentBackupType) + CASE WHEN @ReadWriteFileGroups = 'Y' THEN '_PARTIAL' ELSE '' END + CASE WHEN @CopyOnly = 'Y' THEN '_COPY_ONLY' ELSE '' END + '.' + @CurrentFileExtension
    END
    END
    INSERT INTO @CurrentFiles (CurrentFilePath)
    SELECT @CurrentFilePath
    SET @CurrentDirectoryPath = NULL
    SET @CurrentFilePath = NULL
    END
    -- Create directory
    WHILE EXISTS (SELECT * FROM @CurrentDirectories WHERE CreateCompleted = 0)
    BEGIN
    SELECT TOP 1 @CurrentDirectoryID = ID,
    @CurrentDirectoryPath = DirectoryPath
    FROM @CurrentDirectories
    WHERE CreateCompleted = 0
    ORDER BY ID ASC
    SET @CurrentCommandType01 = 'xp_create_subdir'
    SET @CurrentCommand01 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_create_subdir N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''' IF @ReturnCode <> 0 RAISERROR(''Error creating directory.'', 16, 1)'
    EXECUTE @CurrentCommandOutput01 = [dbo].[CommandExecute] @Command = @CurrentCommand01, @CommandType = @CurrentCommandType01, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
    SET @Error = @@ERROR
    IF @Error <> 0 SET @CurrentCommandOutput01 = @Error
    IF @CurrentCommandOutput01 <> 0 SET @ReturnCode = @CurrentCommandOutput01
    UPDATE @CurrentDirectories
    SET CreateCompleted = 1,
    CreateOutput = @CurrentCommandOutput01
    WHERE ID = @CurrentDirectoryID
    SET @CurrentDirectoryID = NULL
    SET @CurrentDirectoryPath = NULL
    SET @CurrentCommand01 = NULL
    SET @CurrentCommandOutput01 = NULL
    SET @CurrentCommandType01 = NULL
    END
    -- Perform a backup
    IF NOT EXISTS (SELECT * FROM @CurrentDirectories WHERE CreateOutput <> 0 OR CreateOutput IS NULL)
    BEGIN
    IF @BackupSoftware IS NULL
    BEGIN
    SELECT @CurrentCommandType02 = CASE
    WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP_DATABASE'
    WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP_LOG'
    END
    SELECT @CurrentCommand02 = CASE
    WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP DATABASE ' + QUOTENAME(@CurrentDatabaseName)
    WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP LOG ' + QUOTENAME(@CurrentDatabaseName)
    END
    IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ' READ_WRITE_FILEGROUPS'
    SET @CurrentCommand02 = @CurrentCommand02 + ' TO'
    SELECT @CurrentCommand02 = @CurrentCommand02 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
    FROM @CurrentFiles
    ORDER BY CurrentFilePath ASC
    SET @CurrentCommand02 = @CurrentCommand02 + ' WITH '
    IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
    IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
    IF @Compress = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COMPRESSION'
    IF @Compress = 'N' AND @Version >= 10 SET @CurrentCommand02 = @CurrentCommand02 + ', NO_COMPRESSION'
    IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
    IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
    IF @BlockSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BLOCKSIZE = ' + CAST(@BlockSize AS nvarchar)
    IF @BufferCount IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BUFFERCOUNT = ' + CAST(@BufferCount AS nvarchar)
    IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', MAXTRANSFERSIZE = ' + CAST(@MaxTransferSize AS nvarchar)
    IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', DESCRIPTION = N''' + REPLACE(@Description,'''','''''') + ''''
    END
    IF @BackupSoftware = 'LITESPEED'
    BEGIN
    SELECT @CurrentCommandType02 = CASE
    WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'xp_backup_database'
    WHEN @CurrentBackupType = 'LOG' THEN 'xp_backup_log'
    END
    SELECT @CurrentCommand02 = CASE
    WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_backup_database @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
    WHEN @CurrentBackupType = 'LOG' THEN 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_backup_log @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
    END
    SELECT @CurrentCommand02 = @CurrentCommand02 + ', @filename = N''' + REPLACE(CurrentFilePath,'''','''''') + ''''
    FROM @CurrentFiles
    ORDER BY CurrentFilePath ASC
    SET @CurrentCommand02 = @CurrentCommand02 + ', @with = '''
    IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
    IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
    IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
    IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
    IF @BlockSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BLOCKSIZE = ' + CAST(@BlockSize AS nvarchar)
    SET @CurrentCommand02 = @CurrentCommand02 + ''''
    IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', @read_write_filegroups = 1'
    IF @CompressionLevel IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @compressionlevel = ' + CAST(@CompressionLevel AS nvarchar)
    IF @BufferCount IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @buffercount = ' + CAST(@BufferCount AS nvarchar)
    IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @maxtransfersize = ' + CAST(@MaxTransferSize AS nvarchar)
    IF @Threads IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @threads = ' + CAST(@Threads AS nvarchar)
    IF @Throttle IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @throttle = ' + CAST(@Throttle AS nvarchar)
    IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @desc = N''' + REPLACE(@Description,'''','''''') + ''''
    IF @EncryptionType IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @cryptlevel = ' + CASE
    WHEN @EncryptionType = 'RC2-40' THEN '0'
    WHEN @EncryptionType = 'RC2-56' THEN '1'
    WHEN @EncryptionType = 'RC2-112' THEN '2'
    WHEN @EncryptionType = 'RC2-128' THEN '3'
    WHEN @EncryptionType = '3DES-168' THEN '4'
    WHEN @EncryptionType = 'RC4-128' THEN '5'
    WHEN @EncryptionType = 'AES-128' THEN '6'
    WHEN @EncryptionType = 'AES-192' THEN '7'
    WHEN @EncryptionType = 'AES-256' THEN '8'
    END
    IF @EncryptionKey IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @encryptionkey = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
    SET @CurrentCommand02 = @CurrentCommand02 + ' IF @ReturnCode <> 0 RAISERROR(''Error performing LiteSpeed backup.'', 16, 1)'
    END
    IF @BackupSoftware = 'SQLBACKUP'
    BEGIN
    SET @CurrentCommandType02 = 'sqlbackup'
    SELECT @CurrentCommand02 = CASE
    WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP DATABASE ' + QUOTENAME(@CurrentDatabaseName)
    WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP LOG ' + QUOTENAME(@CurrentDatabaseName)
    END
    IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ' READ_WRITE_FILEGROUPS'
    SET @CurrentCommand02 = @CurrentCommand02 + ' TO'
    SELECT @CurrentCommand02 = @CurrentCommand02 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
    FROM @CurrentFiles
    ORDER BY CurrentFilePath ASC
    SET @CurrentCommand02 = @CurrentCommand02 + ' WITH '
    IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
    IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
    IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
    IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
    IF @CompressionLevel IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', COMPRESSION = ' + CAST(@CompressionLevel AS nvarchar)
    IF @Threads IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', THREADCOUNT = ' + CAST(@Threads AS nvarchar)
    IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', MAXTRANSFERSIZE = ' + CAST(@MaxTransferSize AS nvarchar)
    IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', DESCRIPTION = N''' + REPLACE(@Description,'''','''''') + ''''
    IF @EncryptionType IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', KEYSIZE = ' + CASE
    WHEN @EncryptionType = 'AES-128' THEN '128'
    WHEN @EncryptionType = 'AES-256' THEN '256'
    END
    IF @EncryptionKey IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', PASSWORD = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
    SET @CurrentCommand02 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.sqlbackup N''-SQL "' + REPLACE(@CurrentCommand02,'''','''''') + '"''' + ' IF @ReturnCode <> 0 RAISERROR(''Error performing SQLBackup backup.'', 16, 1)'
    END
    IF @BackupSoftware = 'HYPERBAC'
    BEGIN
    SET @CurrentCommandType02 = 'BACKUP_DATABASE'
    SELECT @CurrentCommand02 = CASE
    WHEN @CurrentBackupType IN('DIFF','FULL') THEN 'BACKUP DATABASE ' + QUOTENAME(@CurrentDatabaseName)
    WHEN @CurrentBackupType = 'LOG' THEN 'BACKUP LOG ' + QUOTENAME(@CurrentDatabaseName)
    END
    IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ' READ_WRITE_FILEGROUPS'
    SET @CurrentCommand02 = @CurrentCommand02 + ' TO'
    SELECT @CurrentCommand02 = @CurrentCommand02 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
    FROM @CurrentFiles
    ORDER BY CurrentFilePath ASC
    SET @CurrentCommand02 = @CurrentCommand02 + ' WITH '
    IF @CheckSum = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + 'CHECKSUM'
    IF @CheckSum = 'N' SET @CurrentCommand02 = @CurrentCommand02 + 'NO_CHECKSUM'
    IF @CurrentBackupType = 'DIFF' SET @CurrentCommand02 = @CurrentCommand02 + ', DIFFERENTIAL'
    IF @CopyOnly = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', COPY_ONLY'
    IF @BlockSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BLOCKSIZE = ' + CAST(@BlockSize AS nvarchar)
    IF @BufferCount IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', BUFFERCOUNT = ' + CAST(@BufferCount AS nvarchar)
    IF @MaxTransferSize IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', MAXTRANSFERSIZE = ' + CAST(@MaxTransferSize AS nvarchar)
    IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', DESCRIPTION = N''' + REPLACE(@Description,'''','''''') + ''''
    END
    IF @BackupSoftware = 'SQLSAFE'
    BEGIN
    SET @CurrentCommandType02 = 'xp_ss_backup'
    SET @CurrentCommand02 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_ss_backup @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
    SELECT @CurrentCommand02 = @CurrentCommand02 + ', ' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) = 1 THEN '@filename' ELSE '@backupfile' END + ' = N''' + REPLACE(CurrentFilePath,'''','''''') + ''''
    FROM @CurrentFiles
    ORDER BY CurrentFilePath ASC
    IF @CurrentMirrorFilePath IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @mirrorfile = N''' + @CurrentMirrorFilePath + ''''
    SET @CurrentCommand02 = @CurrentCommand02 + ', @backuptype = ' + CASE WHEN @CurrentBackupType = 'FULL' THEN '''Full''' WHEN @CurrentBackupType = 'DIFF' THEN '''Differential''' WHEN @CurrentBackupType = 'LOG' THEN '''Log''' END
    IF @ReadWriteFileGroups = 'Y' SET @CurrentCommand02 = @CurrentCommand02 + ', @readwritefilegroups = 1'
    SET @CurrentCommand02 = @CurrentCommand02 + ', @checksum = ' + CASE WHEN @CheckSum = 'Y' THEN '1' WHEN @CheckSum = 'N' THEN '0' END
    SET @CurrentCommand02 = @CurrentCommand02 + ', @copyonly = ' + CASE WHEN @CopyOnly = 'Y' THEN '1' WHEN @CopyOnly = 'N' THEN '0' END
    IF @CompressionLevel IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @compressionlevel = ' + CASE WHEN @CompressionLevel = 5 THEN N'ispeed' WHEN @CompressionLevel = 6 THEN N'isize' ELSE CAST(@CompressionLevel AS nvarchar) END
    IF @RetryWrites IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @retrywrites = N''' + @RetryWrites + ''''
    IF @Threads IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @threads = ' + CAST(@Threads AS nvarchar)
    IF @Description IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @desc = N''' + REPLACE(@Description,'''','''''') + ''''
    IF @EncryptionType IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @encryptiontype = N''' + CASE
    WHEN @EncryptionType = 'AES-128' THEN 'AES128'
    WHEN @EncryptionType = 'AES-256' THEN 'AES256'
    END + ''''
    IF @EncryptionKey IS NOT NULL SET @CurrentCommand02 = @CurrentCommand02 + ', @encryptedbackuppassword = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
    SET @CurrentCommand02 = @CurrentCommand02 + ' IF @ReturnCode <> 0 RAISERROR(''Error performing SQLsafe backup.'', 16, 1)'
    END
    EXECUTE @CurrentCommandOutput02 = [dbo].[CommandExecute] @Command = @CurrentCommand02, @CommandType = @CurrentCommandType02, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
    SET @Error = @@ERROR
    IF @Error <> 0 SET @CurrentCommandOutput02 = @Error
    IF @CurrentCommandOutput02 <> 0 SET @ReturnCode = @CurrentCommandOutput02
    END
    -- Verify the backup
    IF @CurrentCommandOutput02 = 0 AND @Verify = 'Y'
    BEGIN
    IF @BackupSoftware IS NULL
    BEGIN
    SET @CurrentCommandType03 = 'RESTORE_VERIFYONLY'
    SET @CurrentCommand03 = 'RESTORE VERIFYONLY FROM'
    SELECT @CurrentCommand03 = @CurrentCommand03 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
    FROM @CurrentFiles
    ORDER BY CurrentFilePath ASC
    SET @CurrentCommand03 = @CurrentCommand03 + ' WITH '
    IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
    IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
    END
    IF @BackupSoftware = 'LITESPEED'
    BEGIN
    SET @CurrentCommandType03 = 'xp_restore_verifyonly'
    SET @CurrentCommand03 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_restore_verifyonly'
    SELECT @CurrentCommand03 = @CurrentCommand03 + ' @filename = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
    FROM @CurrentFiles
    ORDER BY CurrentFilePath ASC
    SET @CurrentCommand03 = @CurrentCommand03 + ', @with = '''
    IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
    IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
    SET @CurrentCommand03 = @CurrentCommand03 + ''''
    IF @EncryptionKey IS NOT NULL SET @CurrentCommand03 = @CurrentCommand03 + ', @encryptionkey = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
    SET @CurrentCommand03 = @CurrentCommand03 + ' IF @ReturnCode <> 0 RAISERROR(''Error verifying LiteSpeed backup.'', 16, 1)'
    END
    IF @BackupSoftware = 'SQLBACKUP'
    BEGIN
    SET @CurrentCommandType03 = 'sqlbackup'
    SET @CurrentCommand03 = 'RESTORE VERIFYONLY FROM'
    SELECT @CurrentCommand03 = @CurrentCommand03 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
    FROM @CurrentFiles
    ORDER BY CurrentFilePath ASC
    SET @CurrentCommand03 = @CurrentCommand03 + ' WITH '
    IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
    IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
    IF @EncryptionKey IS NOT NULL SET @CurrentCommand03 = @CurrentCommand03 + ', PASSWORD = N''' + REPLACE(@EncryptionKey,'''','''''') + ''''
    SET @CurrentCommand03 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.sqlbackup N''-SQL "' + REPLACE(@CurrentCommand03,'''','''''') + '"''' + ' IF @ReturnCode <> 0 RAISERROR(''Error verifying SQLBackup backup.'', 16, 1)'
    END
    IF @BackupSoftware = 'HYPERBAC'
    BEGIN
    SET @CurrentCommandType03 = 'RESTORE_VERIFYONLY'
    SET @CurrentCommand03 = 'RESTORE VERIFYONLY FROM'
    SELECT @CurrentCommand03 = @CurrentCommand03 + ' DISK = N''' + REPLACE(CurrentFilePath,'''','''''') + '''' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) <> @NumberOfFiles THEN ',' ELSE '' END
    FROM @CurrentFiles
    ORDER BY CurrentFilePath ASC
    SET @CurrentCommand03 = @CurrentCommand03 + ' WITH '
    IF @CheckSum = 'Y' SET @CurrentCommand03 = @CurrentCommand03 + 'CHECKSUM'
    IF @CheckSum = 'N' SET @CurrentCommand03 = @CurrentCommand03 + 'NO_CHECKSUM'
    END
    IF @BackupSoftware = 'SQLSAFE'
    BEGIN
    SET @CurrentCommandType03 = 'xp_ss_verify'
    SET @CurrentCommand03 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_ss_verify @database = N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''''
    SELECT @CurrentCommand03 = @CurrentCommand03 + ', ' + CASE WHEN ROW_NUMBER() OVER (ORDER BY CurrentFilePath ASC) = 1 THEN '@filename' ELSE '@backupfile' END + ' = N''' + REPLACE(CurrentFilePath,'''','''''') + ''''
    FROM @CurrentFiles
    ORDER BY CurrentFilePath ASC
    SET @CurrentCommand03 = @CurrentCommand03 + ' IF @ReturnCode <> 0 RAISERROR(''Error verifying SQLsafe backup.'', 16, 1)'
    END
    EXECUTE @CurrentCommandOutput03 = [dbo].[CommandExecute] @Command = @CurrentCommand03, @CommandType = @CurrentCommandType03, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
    SET @Error = @@ERROR
    IF @Error <> 0 SET @CurrentCommandOutput03 = @Error
    IF @CurrentCommandOutput03 <> 0 SET @ReturnCode = @CurrentCommandOutput03
    END
    -- Delete old backup files
    IF (@CurrentCommandOutput02 = 0 AND @Verify = 'N' AND @CurrentCleanupDate IS NOT NULL)
    OR (@CurrentCommandOutput02 = 0 AND @Verify = 'Y' AND @CurrentCommandOutput03 = 0 AND @CurrentCleanupDate IS NOT NULL)
    BEGIN
    WHILE EXISTS (SELECT * FROM @CurrentDirectories WHERE CleanupCompleted = 0)
    BEGIN
    SELECT TOP 1 @CurrentDirectoryID = ID,
    @CurrentDirectoryPath = DirectoryPath
    FROM @CurrentDirectories
    WHERE CleanupCompleted = 0
    ORDER BY ID ASC
    IF @BackupSoftware IS NULL
    BEGIN
    SET @CurrentCommandType04 = 'xp_delete_file'
    SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_delete_file 0, N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''', ''' + @CurrentFileExtension + ''', ''' + CONVERT(nvarchar(19),@CurrentCleanupDate,126) + ''' IF @ReturnCode <> 0 RAISERROR(''Error deleting files.'', 16, 1)'
    END
    IF @BackupSoftware = 'LITESPEED'
    BEGIN
    SET @CurrentCommandType04 = 'xp_slssqlmaint'
    SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_slssqlmaint N''-MAINTDEL -DELFOLDER "' + REPLACE(@CurrentDirectoryPath,'''','''''') + '" -DELEXTENSION "' + @CurrentFileExtension + '" -DELUNIT "' + CAST(DATEDIFF(mi,@CurrentCleanupDate,GETDATE()) + 1 AS nvarchar) + '" -DELUNITTYPE "minutes" -DELUSEAGE'' IF @ReturnCode <> 0 RAISERROR(''Error deleting LiteSpeed backup files.'', 16, 1)'
    END
    IF @BackupSoftware = 'SQLBACKUP'
    BEGIN
    SET @CurrentCommandType04 = 'sqbutility'
    SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.sqbutility 1032, N''' + REPLACE(@CurrentDatabaseName,'''','''''') + ''', N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''', ''' + CASE WHEN @CurrentBackupType = 'FULL' THEN 'D' WHEN @CurrentBackupType = 'DIFF' THEN 'I' WHEN @CurrentBackupType = 'LOG' THEN 'L' END + ''', ''' + CAST(DATEDIFF(hh,@CurrentCleanupDate,GETDATE()) + 1 AS nvarchar) + 'h'', ' + ISNULL('''' + REPLACE(@EncryptionKey,'''','''''') + '''','NULL') + ' IF @ReturnCode <> 0 RAISERROR(''Error deleting SQLBackup backup files.'', 16, 1)'
    END
    IF @BackupSoftware = 'HYPERBAC'
    BEGIN
    SET @CurrentCommandType04 = 'xp_delete_file'
    SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_delete_file 0, N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + ''', ''' + @CurrentFileExtension + ''', ''' + CONVERT(nvarchar(19),@CurrentCleanupDate,126) + ''' IF @ReturnCode <> 0 RAISERROR(''Error deleting files.'', 16, 1)'
    END
    IF @BackupSoftware = 'SQLSAFE'
    BEGIN
    SET @CurrentCommandType04 = 'xp_ss_delete'
    SET @CurrentCommand04 = 'DECLARE @ReturnCode int EXECUTE @ReturnCode = [master].dbo.xp_ss_delete @filename = N''' + REPLACE(@CurrentDirectoryPath,'''','''''') + '\*.' + @CurrentFileExtension + ''', @age = ''' + CAST(DATEDIFF(mi,@CurrentCleanupDate,GETDATE()) + 1 AS nvarchar) + 'Minutes'' IF @ReturnCode <> 0 RAISERROR(''Error deleting SQLsafe backup files.'', 16, 1)'
    END
    EXECUTE @CurrentCommandOutput04 = [dbo].[CommandExecute] @Command = @CurrentCommand04, @CommandType = @CurrentCommandType04, @Mode = 1, @DatabaseName = @CurrentDatabaseName, @LogToTable = @LogToTable, @Execute = @Execute
    SET @Error = @@ERROR
    IF @Error <> 0 SET @CurrentCommandOutput04 = @Error
    IF @CurrentCommandOutput04 <> 0 SET @ReturnCode = @CurrentCommandOutput04
    UPDATE @CurrentDirectories
    SET CleanupCompleted = 1,
    CleanupOutput = @CurrentCommandOutput04
    WHERE ID = @CurrentDirectoryID
    SET @CurrentDirectoryID = NULL
    SET @CurrentDirectoryPath = NULL
    SET @CurrentCommand04 = NULL
    SET @CurrentCommandOutput04 = NULL
    SET @CurrentCommandType04 = NULL
    END
    END
    END
    -- Update that the database is completed
    UPDATE @tmpDatabases
    SET Completed = 1
    WHERE Selected = 1
    AND Completed = 0
    AND ID = @CurrentDBID
    -- Clear variables
    SET @CurrentDBID = NULL
    SET @CurrentDatabaseID = NULL
    SET @CurrentDatabaseName = NULL
    SET @CurrentBackupType = NULL
    SET @CurrentFileExtension = NULL
    SET @CurrentFileNumber = NULL
    SET @CurrentDifferentialBaseLSN = NULL
    SET @CurrentDifferentialBaseIsSnapshot = NULL
    SET @CurrentLogLSN = NULL
    SET @CurrentLatestBackup = NULL
    SET @CurrentDatabaseNameFS = NULL
    SET @CurrentDatabaseType = NULL
    SET @CurrentDate = NULL
    SET @CurrentCleanupDate = NULL
    SET @CurrentIsDatabaseAccessible = NULL
    SET @CurrentAvailabilityGroup = NULL
    SET @CurrentAvailabilityGroupRole = NULL
    SET @CurrentIsPreferredBackupReplica = NULL
    SET @CurrentDatabaseMirroringRole = NULL
    SET @CurrentLogShippingRole = NULL
    SET @CurrentCommand02 = NULL
    SET @CurrentCommand03 = NULL
    SET @CurrentCommandOutput02 = NULL
    SET @CurrentCommandOutput03 = NULL
    SET @CurrentCommandType02 = NULL
    SET @CurrentCommandType03 = NULL
    DELETE FROM @CurrentDirectories
    DELETE FROM @CurrentFiles
    END
    --// Log completing information //--
    Logging:
    SET @EndMessage = 'Date and time: ' + CONVERT(nvarchar,GETDATE(),120)
    SET @EndMessage = REPLACE(@EndMessage,'%','%%')
    RAISERROR(@EndMessage,10,1) WITH NOWAIT
    IF @ReturnCode <> 0
    BEGIN
    RETURN @ReturnCode
    END
    END
    GO
    ALTER AUTHORIZATION ON [dbo].[DatabaseBackup] TO SCHEMA OWNER
    GO
    Diane

  • System generated index property not generated in database

    Hi,
    I created an offline table by copying it from an (first) online database to my project. The table contains a unique key constraint, which references a system generated index. Now I used this offline table to generate a table in another (second) online database. This all works well except, that the "System Generated" property of the index is "false" and not "true" as in the offline table (and the first online database). When I manually reconcile the same table to the second online database again, there is always a difference shown for this index property. When I try to continue the reconcile process to change this property I get an error message, that the index cannot be dropped because it is obviousely referenced by the unique constraint.
    When I drop the constraint and try to generate the index only I get the following warning message:
    Jan 11, 2012 2:08:59 PM oracle.javatools.db.property.AbstractPropertyManager processDiffs
    WARNING: Unsupported property: systemGenerated
    Is there a way to work around this annoying behavour? Is it possible to change this index property by an ALTER INDEX statement?
    Im using JDeveloper 11.1.2.1.0 (Build JDEVADF_11.1.2.1.0_GENERIC_110907.2314.6081)
    Thanks for help and hints
    Thomas
    Edited by: thmayr on 11.01.2012 05:08

    Hi,
    it might be due to some BUG in RDBMS...
    First Check the Secondary index in TEST system
    Look at the Transport Number in DEV system, If this is having error, then it will show you the error details also,
    If that not moved Properly then you need to create another request for the INDEX and move it again
    See the threads with similar problem...
    Warning: Index does not exist in database system MSSQL
    Index does not exist in database system ORACLE??????
    Re creation of database index
    Hope it will solve your problem...
    <b>Reward Points if useful</b>
    Thanks & Regards
    ilesh 24x7

  • Index does not exist in database system MaxDB

    Hi!
    Could some one tell me what can I do with this error message.
    This message is in Prod, it doesn't happen in Qas and Test environment. The Database and sap was down and up again.
    The Index was active in prod. again.
    I really need help.
    Thanks in advance

    Dear Mr. Rodriguez,
    You wrote that the problem occurred on the PROD system.
    Are you SAP customer?
    If you are SAP customer plese see the SAP notes::
    928037     FAQ: MaxDB Indexes
    940420     FAQ: Database structure check (VERIFY)
    990602     FAQ: CCMS for MaxDB/SAP liveCache technology
    896023     Incorrect CREATE INDEX statement in DFACT.SQL
    767598     Available documentation
    If you are SAP customer, please create the ticket on queue BC-DB-SDB for
    your issue.
    Please review the Rules of Engagement at
    Welcome and Rules of Engagement
    Please provide more information to get clear on your problem:
    -> What is the database version?
        < dbmcli -d <SID> -u control,<control> show version >
    -> What were the errors in the knldiag* files?
    -> If you restarted the database ones, it will be helpful to
        review the knldiag.old file for additional information.
    -> Please run Database structure check & review the results.
    Thanks you and best regards, Natalia Khlopina

  • Shrink database is not active in SQL SERVER Enterpriser manager

    Dear guru
    Shrink database is not active in SQL SERVER Enterpriser manager what to do
    Rupesh
    SAP BASIS Consultant

    Hi,
    >Thank you very much for not supporting i have solved the problem by reading some other documents
    That's exactly what I wanted you to do : With a little personal work, you can actually learn to do your own work ! "Don't give fish to hungry people. Teach them how to go fishing !"
    Regards,
    Olivier

  • The Database Link is not active

    try to be more clear, i'm in lack of ideas in this problem.
    I am following guide Oracle Database 2 Day + Data Replication and Integration Guide.
    I defined global_names parameter of remote database as true.In the step of "creation database link" i am getting error.(oracle enterprise manager 11g-->schema-->database links-->create)
    When i query on remote database(select * from global_name), I got orcl.
    So,In "Name" and "Net service name" field i specified orcl.Check radio button "Fixed user." and Username and password of remote database, and i got message "Database Link STRMADMIN.ORCL has been created successfully."
    But when i clicked on database link Name i got error, saying that
    "The Database Link is not active.ORA-02084: database name is missing a component "
    (Both dbs are oracle 11g.)
    Please reply.

    I think I am confused, "what should be Name and Net Service Name" while creating database link in context of "Database Replication." when global_names parameter is true in both database. I read somewhere "If the value of the GLOBAL_NAMES initialization parameter is TRUE, then the database link must have the same name as the database to which it connects." so what should database link name " should it be remote database name? db_domain?( or outtput of select * from global_name).......
    my tnsnames.ora on source db is
    ORCL.a.ernet.in =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = a.b.c.d)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = ORCL.a.ernet.in)
    when i connect user of remote database(a.b.c.d) from sqlpuls then it is connected.
    command which i give : sqlplus remoteUser/[email protected]

  • Index not created in database

    Hi,
    We need some guidance in creating indexes. Have created a table index with SE11. Chosen index, Non-unique, index on all databases.
    When details are displayed the following message appears "Index does not exist in in database system". Which steps should be proceeded to create the index in DB? And what's the purpose if it's not created in DB?
    What's the difference between creating indexes with tcode SE14 and SE11?

    Bruce,
    Check below details. It may help you.
    Note 912620 - FAQ: Oracle indexes
    Note 334224 - Important notes for creating indexes
    http://help.sap.com/saphelp_nw70/helpdata/EN/f2/31ad7d810c11d288ec0000e8200722/content.htm
    Thanks
    Sushil
    Edited by: Sushil Suryawanshi on Jun 3, 2009 4:39 AM

  • Setup solution database - "2007 index does not exist"

    Hi all,
    after setting up the solution database following the Implementation Guide on a Solution Manager 7 SP 19 system, I created some test problem and solution articles and linked them.
    When I try to do now a full compilation for the first time via SAF Diagnosis, Goto > Indexes, then the error message "2007 - index does not exist" comes up.
    So, I checked the customizing and did the customizing again. I assigned the Knowledge Base SDB to a higher level than its sub knowleged bases SDB Problems, SDB Solutions like this:
    SDB
    - SDBATTACHEMENT
    - SDBICS
    - SDB PROBLEMS
    - SDB SOLUTIONS
         - SDB SOLUTIONS DOC
    Anyway, the same error message
    I checked some threads but it didn´t help so far.
    http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414900)ID1583639050DB00866280264985025627End blog=/pub/wlg/7522
    Did anyone solved this issue?
    How can I activate the index?
    Any hints/ ideas are highly appreciated.
    jan

    Hi guys, just to get the thread up.. quite important.
    Is there anyone who can share some ideas?

  • Database Link not Active

    I am trying to create a database link from Oracle 7.3.4 to Oracle 8i. When I click the "Test" button in OEM ( after entering the relevant data) I am getting an error that reads "Database Link not Active". What am I doing wrong? can someone help?

    Hi ,
    Thanks again for your quick and extremely helpful response.
    As you have guessed this is my clients tnsname.ora file. From your response i believe i need to check the tnsnames.ora file of the database itself ( i assume it resides in the server box).
    I used the same exact systax for creating the link and the link was successfully created. But i was not able to access any table and was getting the error "TNS: could not resolve service name." Now i understand that the 7.3 server is not able to connect to the 8i, as it does not know of its existence (as there is no information available in its own tnsnames.ora file). Am i right?
    Thank you once more.
    You will make my day (assuming i understood you right.)

Maybe you are looking for

  • My Ipod Touch is completely unresponsive and shows no signs of functioning.

         I had received the Ipod from a sibling after they obtained the iphone 5c and I haven't touched it since I got it. It was working fine while my sister had it and as far as I know there are no injuries on the device besides the countles back scrat

  • Arabic data shows Invalid characters

    Hi, Arabic data is stored in 9i database having US7ASCII character set. Our vendor application is displaying data in arabic correctly but when we try to query data then we are getting characters like mMml aaEa_JQfdmGJ Regards Ahmer

  • Compressor ProRes 422 (L/T) to FCP

    Howdy! I'm taking .mov H.264 files and throwing them into compressor, and on the other end receiving ProRes 422 (L/T) files just perfectly. When I put the ProRes footage into a FCP timeline, I still have to render the audio!! Why is this? I actually

  • Warning message from Jdeveloper on Compilation

    Hi all, I am a new bie to JDeveloper and ADF. While deploying my sample application, "_Warning: JSP is not within the HTML Root directory, nor is it a tag file from a distributed tag library. It will not be compiled_." is shown for all the jspx pages

  • Re: imported material for local vendor.

    Hi guru's, Our requirement is to get imported material for local vendor, for this excise postings should not be allowed (posted) when requirement is raised to local vendor. what are the settings to be done for no excise capture. replies awaiting. tul