System generated index property not generated in database

Hi,
I created an offline table by copying it from an (first) online database to my project. The table contains a unique key constraint, which references a system generated index. Now I used this offline table to generate a table in another (second) online database. This all works well except, that the "System Generated" property of the index is "false" and not "true" as in the offline table (and the first online database). When I manually reconcile the same table to the second online database again, there is always a difference shown for this index property. When I try to continue the reconcile process to change this property I get an error message, that the index cannot be dropped because it is obviousely referenced by the unique constraint.
When I drop the constraint and try to generate the index only I get the following warning message:
Jan 11, 2012 2:08:59 PM oracle.javatools.db.property.AbstractPropertyManager processDiffs
WARNING: Unsupported property: systemGenerated
Is there a way to work around this annoying behavour? Is it possible to change this index property by an ALTER INDEX statement?
Im using JDeveloper 11.1.2.1.0 (Build JDEVADF_11.1.2.1.0_GENERIC_110907.2314.6081)
Thanks for help and hints
Thomas
Edited by: thmayr on 11.01.2012 05:08

Hi,
it might be due to some BUG in RDBMS...
First Check the Secondary index in TEST system
Look at the Transport Number in DEV system, If this is having error, then it will show you the error details also,
If that not moved Properly then you need to create another request for the INDEX and move it again
See the threads with similar problem...
Warning: Index does not exist in database system MSSQL
Index does not exist in database system ORACLE??????
Re creation of database index
Hope it will solve your problem...
Reward Points if useful
Thanks & Regards
ilesh 24x7

Similar Messages

Index does not exist in database system DB6

Hi,
Problem : Index does not exist in database system DB6.
I need further explanation why when i transport index from Development Client to Production Client the index is active but does not exist in database system DB6.
So when the cases is occurs i must re-create the index again in Production Level...
Can someone give me some ideas?
Thanks.

Hi,
it might be due to some BUG in RDBMS...
First Check the Secondary index in TEST system
Look at the Transport Number in DEV system, If this is having error, then it will show you the error details also,
If that not moved Properly then you need to create another request for the INDEX and move it again
See the threads with similar problem...
Warning: Index does not exist in database system MSSQL
Index does not exist in database system ORACLE??????
Re creation of database index
Hope it will solve your problem...
Reward Points if useful
Thanks & Regards
ilesh 24x7

Warning: Index does not exist in database system MSSQL

Hi,
After activating the Index from SE11,
I receive the following Warning:
Index does not exist in database system MSSQL.
What does this mean? Has performance been increased or does the index 1st have to exist in the database system MSSQL?

When you create index at SE11 and you need activate database utility.
utilitities-database utility->then click activate and adjust database.
else you can use SE14 and so that Index will create databse level.
Reward Points if it is helpful
Thanks
Seshu

Index does not exist in database system ORACLE??????

Hi Experts,
I created a Secondary Index in DEV, its fine and the message is,
Index KNA1~Z01 exists in database system ORACLE
I moved it to TEST and there I got the message is like,
Index does not exist in database system ORACLE
So,
1 - Wht I hv to do now? Shuld I see BASIS people?
2- Why its happened like that? Coz of not enough space?
ThanQ.

thanq sudheer,
I got the return code as 4, so Can I go for creation of new request and there by moving to test?
1 - Anyways, so, after Activating Seconadyr Index, Shuld I come back and Do I need to activate the Table also?
or
2- Just activating the index is enough?
thanq.
Message was edited by:
Srikhar

Index does not exist in database system DB6 sap

Hi All
In development system i have added a field into already existing index and activated successfully without any errors or warnings and after transported the TR into Quality system,In Quality system it shows the warning Index does not exist in database system DB6 sap
Thanks
Vamsi

Hi Mohan,
After any change in the existing structure of the table you need to adjust and then activate it.
It can be done using SE14 tcode, please try using this.
Regards,
Mohammed

Index Does Not Exist In Database System MSSQL

Hello,
I have an Index that has this message:
" Index Does Not Exist In Database System MSSQL"
Can someone guide me how to update Index to the database?
Thank you.

Check this thread:
missing primary index
Otherwise, a few more informations would help! Thanks.

Primary index does not exist in database but shows in SE14?

I added a couple of key fields to a Z table and activated it. Every thing went well - adjusted it with SE14 also.
When I checked the Runtime object - it is OK.
When I checked Database Object, it is showing that the Primary Index does not exist in Database but SE14 says that the Priamry Index exists in Database.
Please advise how to correct this. I saw another psoting when I searched per this error message: "Indexes: Inconsistent with DDIC source" . It tells to create this index at Database but need to know the steps.
pl advise.
(reposting here)
Edited by: Venkatabby on Mar 26, 2008 4:05 PM

hi,
To create a index for a table,
go to se11->click on Indexes tab and create a primary index.
Indexes speed up data selection from the database. They consist of selected fields of a table, of which a copy is then made in sorted order. If you specify the index fields correctly in a condition in the WHERE or HAVING clause, the system only searches part of the index (index range scan).
The system automatically creates the primary index. It consists of the primary key fields of the database table. This means that for each combination of fields in the index, there is a maximum of one line in the table. This kind of index is also known as UNIQUE.
If you cannot use the primary index to determine the result set because, for example, none of the primary index fields occur in the WHERE or HAVINGclauses, the system searches through the entire table (full table scan). For this case, you can create secondary indexes, which can restrict the number of table entries searched to form the result set.
You create secondary indexes using the ABAP Dictionary. There you can create its columns and define it as UNIQUE.
reward points if useful.
regards
sandhya

System generated Index names different on target database after expdp/impdp

After performing expdp/impdp to move data from one database (A) to another (B), the system name generated indexes has different names on the target database, which caused a major issue with GoldenGate. Could anyone provide any tricks on how to perform the expdp/impdp and have the same system index name generated to be the same on both source and target?
Thanks in advance.
JL

While I do not agree with Sb choice of wording his solution is correct. I suggest you drop and recreate the objects using explicit naming then you will get the same names on the target database after import for constraints, indexes, and FK's.
A detailed description of the problem this caused with Golden Gate would be interesting. The full Oracle and Golden Gate versions is use might also be important to the solution, if one exists other than explicitl naming.
HTH -- Mark D Powell --
Edited by: Mark D Powell on May 30, 2012 12:26 PM

Index file not generating

Hi
I am using the RoboHTML trial 9.0 version and imported a previous 8.0 help project file. Everything seems fine except indexing. The project shows having my index file from the previous project but my index file is not generating. How can I use my existing index file and not have to create a new index file?
Please help.
thanks
Caryn Drovie

Have you tried ending the session with Control C ?

Auto-generated objects are not generated - CP2 and CP1

Hi folks,
Almost nothing that is dependent on the Event Handler works.
When I "click" during recording, nothing is added to the new movie
except the capture of the background ... no matter the
recording mode used. When recording in Demo mode, text captions and
highlights should be auto-generated, but are not. And when
recording in either of the Assessment modes, clickboxes and other
interactivity that should be auto-generated are not.
Sudden onset - no prior trouble.
Both Captivate 1 and 2 are loaded and the problem exists with
both. Yet both were fine earlier (though I don't know when this
happened, I just know it was discovered on both at the same time
yesterday.)
Any help is greatly appreciated.

Hello toddfromheber,
I'm sorry to hear you are having these issues with your passwords. If you are having issues with iCloud Keychain not sharing or autofilling your generated passwords, you may find the troubleshooting steps outlined in the following article helpful:
Get help using iCloud Keychain - Apple Support
Sincerely,
- Brenden

Index does not exist in database system MaxDB

Hi!
Could some one tell me what can I do with this error message.
This message is in Prod, it doesn't happen in Qas and Test environment. The Database and sap was down and up again.
The Index was active in prod. again.
I really need help.
Thanks in advance

Dear Mr. Rodriguez,
You wrote that the problem occurred on the PROD system.
Are you SAP customer?
If you are SAP customer plese see the SAP notes::
928037 FAQ: MaxDB Indexes
940420 FAQ: Database structure check (VERIFY)
990602 FAQ: CCMS for MaxDB/SAP liveCache technology
896023 Incorrect CREATE INDEX statement in DFACT.SQL
767598 Available documentation
If you are SAP customer, please create the ticket on queue BC-DB-SDB for
your issue.
Please review the Rules of Engagement at
Welcome and Rules of Engagement
Please provide more information to get clear on your problem:
-> What is the database version?
 < dbmcli -d <SID> -u control,<control> show version >
-> What were the errors in the knldiag* files?
-> If you restarted the database ones, it will be helpful to
 review the knldiag.old file for additional information.
-> Please run Database structure check & review the results.
Thanks you and best regards, Natalia Khlopina

Primary Index is not Active in Database

Dear Experts,
I have created a ztable and transported it to production server. But in Production server the primary index is missing. When i checked in it in development and quality server it exist there but not in production. I have tried to activate through SE14 but it is not activating . Can you please suggest a procedure to activate it. Waiting for your suggestion.
Regards,
Venkat.

posted in abap dictionary

When generating Navigator Form, CG$STARTUP_MODE not generated

Hi all,
We are using Desesigner 6.4.2 and Headstart, and I try to generate a Navigator Form. In this case, the generator does not generate the parameter CG$STARTUP_MODE.
Running the fmx, an error message pops up saying: FRM-47023: No such parameter named cg$startup_mode exists in form ...
This error is raised during the PRE-FORM trigger.
When using the the preference set QMS65_DEBUG_MODULE, this error does not occur. This convinces me that there is a bug in the delivered Headstart libraries.
Thanks in advance,
Joep Hendrix

All,
Tonight I added the following text to bug 2309202 in the bug database on this topic:
start *************************************************************************************
Suggested workaround for this bug does not work because of another bug: 2391990. When the cg$startup parameter is not generated, all user defined arguments at module will not be generated neither.
Since it is not possible to generate a parameter cg$startup_mode into a form by adding it to the template form in advance (OFG ignores template form parameters starting with CG$), the only workaround for the problem with cg$startup mode seems to be to make the headstart library code robust for the lack of this parameter, using built in qms$errors.add_suppress_message('FRM-47023').
However, the problem is caused by OFG (bug 2391990), not headstart.
end *************************************************************************************
Also I logged bug 2391990 on Oracle Form Generator, that is referred to. Bug text for this bug:
start *************************************************************************************
BUG 2391990 - OFG GENERATOR DOES NOT GENERATE PARAMETERS FOR ARGUMENTS IN READ ONLY FORMS
Since release 4.2 of Designer 6.5, form generator sometimes does not generate
parameters for user defined arguments. On top of that, parameter
cg$startup_mode is also not generated in this case.
This makes the suggested workaround for bug 2309202 useless.
How to reproduce
================
Use designer (I used some wizards) to
- create a table definitaion named TEST
- add columns (id number(10) not null, name (30))
- add a primary key on column id.
- create a module named TESTMOD (Oracle Forms)
- add a module component named TEST, insert=no, update=no, delete=no
- add a table usage on table TEST
- add bound items for columns id and name display length 10 resp. 30 and
properties insert=no, update=no for both columns
- add an argument p_test at module level, varchar2, length=50, default
value=test
- generate the module for the 1st time. Notice that parameters cg$startup_mode
and p_test are generated.
- now, change the display length of bound item id from 10 to 15
- generate the module again. Notice that parameters cg$startup_mode and p_test
are -NOT- generated!
- change the bound item length back from 15 to 10 for id
- Set the module component properties insert=yes, update=yes, delete=yes (do
not touch the insert/update property at bound item level)
- generate the module again. Notice that in this case the parameters
cg$startup_mode and p_test are NOT generated
- Set the bound item properties insert=yes, update=yes for id and name
- generate the module again. Now the parameters are correctly generated.
The behaviour seems intermittently, but is reproducible every time the
specification is exactly the same as before.
The above scenario was tested with AND without making use of the Headstart
template package set. This did not affect the outcome: in both cases the
errors did occur.
It is not possible anymore to rely on the correct generation of the argument
and named passed value mechanism of OFG.
end *************************************************************************************
Regards, Marc
P.S. Rob Kelder is an Oracle Employee.

Jheadstart oes not generate NLS key in resource bundle for Static domains

Hello
according to jhsdevguide1013 on section 6.5.2 about "Translation of static domains" when I check "Generate NLS-enabled prompts and tabs" and run application generator , Jheadstart oes not generate NLS key in resource bundle for Static domains.
Does anybody can help us for this problem?

Thank you for reporting this, I have logged it as a bug.
As a workaround, you can customize the Generator Template default/item/staticDomainOptions.vm
See http://blogs.oracle.com/jheadstart/2006/11/30#a108 for an example how to let a template generate extra resource bundle keys.
Hope this helps,
Sandra Muller
JHeadstart Team
Oracle Consulting

Remote system monitoring entry- data not relayed to Central system

Hello Folks,
I am trying to establish a central monitoring system for our client. I am trying to test it in the DEV environment first.
The central system is a Solution manager system (Dual stack- ABAPJAVA). I am trying to bring in monitoring data from the ECC development environment (ABAPJAVA).
First of, i created to RFC connections in Solution manager system, one for data collection and the other for analysis. I have maintained the host address of the ECC system as target.
Then i have created a remote system entry in Transaction RZ21--> technical infrastructure entered the 2 RFC names and have executed the function.
At this point i am only trying to bring in ABAP stack monitoring data form the ECC system so i have not generated the CSNCONF file.
Now when i look in Solution manager RZ20-->CCMS monitoring templates, i can't see any data for the the ECC system.
I guess i am doing something wrong. Am i looking in the wrong monitor set?
As additional information: Solution manager (SMD) and ECC (ECD) use different transport domains / transport groups. I dont know if this makes a difference.
Can some one please help.
Regards,
Prashant

Hi Prashant,
if I understand correctly your system shows only MTEs from R/3 Stack, not from the OS side, pls check your SAPOSCOL. Are the data in OS06 in your remote system correct and do you see the current data, refredhed all 10 seconds?
To check your environment, pls do the following:
in th efirst step check in RZ21 > in the Topology part the System Overview for your system connection to your back end system. Are the Read Destination Data RFC and the Destination Analysis RFC correct and works the authority chek fine?
In the second step pls check in RZ21 > in the Agents for Remotey SAP Systems part; are there registered your remote ccms agents correctly and works the connection test.
Stop the agents and in your RZ20 monitor pls enter STAT in your command field. Are there displayed for your MTE nodes the read RFC destinations?
Start the agents and and in your RZ20 monitor pls enter STAT in your command field. Are there displayed for your MTE nodes the CCMS Agent RFC destinations?
To rebuild the Monitor in the CEN system you could try to reset the node of your remote system in the warm up status > go in the remote system to RZ1 > go to local segments > change to edit > select your segments > reset segment in "WARMUP" status.
In the CEN system you coul try to go to the edit mode for the Agents for Remot SAP Systems > select your remote system and push the button Reinitialize Agents
In the back end system you can try to delete all MTEs in RZ21 > menu Technical Infrastructure > Reorgenize Segment Table > select the options with "ALL" in the CEN and the remote system to reorgenize all data.
Could you pls post for the missing MTEs a screenshot on the one side from the CEN system and on the other side from the remote system...
and last but not least you could try the following for missing OS MTEs
delete ALALERTS, ALMTTREE and ALPERFHI in /usr/sap/ccms/<SID>_<SNR> and check in the agents folder all trace and log files for errors.

System generated index property not generated in database

Similar Messages

Maybe you are looking for