PPR & Listings in CRM

Hi
I am creating Product Partner Ranges / Listings in CRM. We are using CRM 2007 and ECC 6.0. Basically we are creating listings in CRM and transferring them into ECC since delta downloads of PPR/ Listings from ECC to CRM is not supported . Is there a way to make PPR changes in ECC and download them to CRM and vice versa.
Thanks

It might be in component CRMCMP_NAVBAR. However, so far I have been unable to get a break point to activate. Ideally on choosing an option from the navigation bar, like Service ticket, I would like the debug session to start before call the Service Ticket component.
This is all in the aim of trying to determine why the initial startup of the Service Ticket is so slow.
Jas.

Similar Messages

Product Proposal in CRM 4.0

Hello everybody,
Just for information I would like to know something please :
In R/3 SD we use product proposal from tables VBPV and VBPK while creating sales documents for our customers.
We would like to use just the same in our CRM and Mobile Sales environnement.
So I would like to know if there is a way to download those tables (who make the link partner/product accroding to what a partner already ordered and doesn't contain exactly the same than a PPR created in CRM which assigns a product to a group as we use for TOPN for example) to CRM or do I have to do specific work for this ?
Thank you for your reply !
Mi

Hello everybody,
Just for information I would like to know something please :
In R/3 SD we use product proposal from tables VBPV and VBPK while creating sales documents for our customers.
We would like to use just the same in our CRM and Mobile Sales environnement.
So I would like to know if there is a way to download those tables (who make the link partner/product accroding to what a partner already ordered and doesn't contain exactly the same than a PPR created in CRM which assigns a product to a group as we use for TOPN for example) to CRM or do I have to do specific work for this ?
Thank you for your reply !
Mi

Listings are not successfully sent to Rex 3.2

Hi All,
I’m facing some issues to send product listings from CRM to Rex 3.2.
We configured the DCN a Product type download profile and we assigned it to Products by selecting Listings a download criteria.
The Product profile has been assigned to a specific sales organizations.
We configured a Listing Set Type to be used as selection criteria, but listings are not sent to Rex and some products are sent independently from the listing.
Could you help me to figure out the proper configuration?
Thank you

Sorry Sean but my problem is not the list of bugs but the keywords not being assigned to my photos as posted initially. So, in this sense I don't find your post much helpful to be honest.
That's fine, the list wasn't for you, it was for Pete Marshall.
Anyways, I upgraded back to 2.4. Indeed I do believe that its my slow system and processor that is causing the problems. When I fire up lightroom, I close everything else and I still get my fan speeding and pc's heart pulpitating, you know!!
1. I also get other problems like looping the image view for some time before it renders a larger review of the photo I am looking, if I move fast between views. (therefore I can't see the image since it keeps on/off looping)
This is because it's taking ages for your computer to render, due to the low spec. Rendering is quite intensive, so needs lots of power to be quick.
2. It doesn't seem to create virtual copy, but only at times (preferably when it feels like it). I get errors similar to the following.
The virtual copy should always be created, but can be only readily be seen when in the same folder as the master.
3. ...and also I get errors trying to save a Quick collection, like: "Internal Error has occured: C:\....\\Lightroom Catalog.lrcat":PRIMARY KEY must be unique. Statement: INSERT INTO AgLibraryTagImage (Id_local, flattenedParams,image, pick,
Well, you really shouldn't be seeing bare SQLite instructions, so something is definitely up. Try using Relaunch and Optimize from the Catalog Settings 'General' tab. This should detect if there are issues with the catalog itself. Some of the things you are experiencing are due to the speed of the machine, but I don't think all of them are.

PPR(Partner Product Range) Type for Product Catalog Views

Hi all,
I need to prevent showing some products in E-commerce Catalog depending on the PPR settings. Does the PPR type for Catalog Views help me? can any one explain me what is significance of drop-down "Application" in the PPR type configuration.
thanks in advance
Regards, DD

Hi Mohanthy,
We are using PPR ( CRM Listings in Filtering products from ISA ). There is no standard way to make the products not displayed in catalog based on listing. We call a Z function module to after the user login to the Ecommerce Application and get the allowed products list and then use that to filter-out the products from the catalog page. ( This might not be a gr8 approach but .. this is exactly your requirement, and also we don't have a huge catalog so listing data in session is small for us.)
Hope this gives you a idea.
regards,
Yoshi

Listing and PPR

Hello
What is the difference between PPR and listing in CRM 5.0 ?
We did not have listing in 4.0 and this was acheived through PPR but when it comes to 5.0 we have both and what is the need for having listing and PPR ?
Jessy

Thanks for the helpful info Paul.
Just to make sure that I have understood what you have conveyed:
Assume the following scenario
Existing : R3
Implementing : CRM 5.0
We can download the existing listing/exclusions from R3 and create new ones in R3 and perform the delta download...
and if the new ones are created in CRM, do we still create them in SAPGUI -> Master Data -> PPR or can we create them straight under SAPGUI -> Master Data -> Listings
Hope I make some sense in asking this question
Jessy

Mobile Functionalities part of CRM - Web Application

Hello,
We are currently using CRM 4.0 with SAP GUIs. We are mainly using the Mobile Sales Application and concepts such as Business Partners, PPRs, Activity Journals, Marketing Attributes, Segment Builder, Territory Management, Products, Surveys or Organization Model.
We will probably to move to a CRM Web Client version, more suitable for a call center that we plan to implement.
I would like to understand if we still will be able to use the concepts stated above the same way as currently do or if there are differences on functionalities between SAP GUI and the Web Client, especially with regards Mobile Sales.
Thanks in advance for your help,
Sébastien

Hi,
The Mobile sales application and the concepts you mentioned are all based on CRM server and not dependent on the mobile sales application.So when you switch to ICWebClient the backend master data will remain the same and all the concepts will remain intact.So you can go ahead and implement it.
Thanks,
ashish.

BADI For Inbound Queue in CRM

Hi All,
I am replicating Product Listings (VB02 in ECC) data from ECC to CRM.
Now I need to Update a Z table in CRM System with the data coming from ECC when the Inbound Queue in CRM System is processed via SMQ2.
Can Anybody please tell me what BADI will be useful
I found one CRM_DATAEXCHG_BADI but not sure how it goes.
I also tried in Debuging the inbound Queue. It will take Long time to find out BTE or BADI in this way.
So please help me with the BADI or BTE Name.
Thanks
Venkat

Hi Gautham,
No good, It did not help me Gautham.
Can you please suggest me some other way of dong it.
I have 2 badis to use one is address_update and the other is addres_check.
I implemented address_check which had a address structure as a changing parameter and I update it there, it works absolutely fine.
But my requirement is to update the structure based on the condition of BUT000. That is the BUT000-type, which means I need to update the structure only for person and not for organization and group.
so in the badi address_check i need the BUT000 details, which I am not able to trace even from the local memory as I am getting the error saying "Memory is not yet instantiated"
and If i use the other badi address_update.
I have the problem the other way round here. I have all the BUT000 details here I can put the condition to update only for person, but I am not able to update the address structure.
Please help me. This is required very urgent.
Maximum points will be rewarded.
Thanks in advance.
Arul.

Contract determination in service order for PPR items

Hi Experts,
Contract data is not being determined for some items in service order. All these items are assigned to product list in service contract using product range or PPR.
1) PPR is created with the type "sales contract"
2) In the categories section assigned the relevant category ID's
3) PPR is assigned to the service contract under product list.
4) Service order is maintained for contract determination 'D' - determination both at header and item level
5) When a service order is created I see that expected items are not showing the contract data.
Any suggestions - any specific setting I am missing
I found a SAP note for same problem in previous versions of CRM. (5.0 to 5.1)
but we are on BBPCRM 6.0
Thank you
Ram

Hi Shalini
                i am trying to create a service ticket from WEB IC by confirming Account and Ibase and then creating service request and able to save without error.
            if i end session and open the service request again in change mode and if delete the ibase, then appeas the message
"You should run a new contract selection for item 0000000010", going through OSS notes, but found nothing.
           Contract Determination is set to 'E' : Assign at Item leve : Assign immediately if unique for transaction type ZXXX.
if i open the service ticket in CRMD_ORDER and go in change mode if i click process action button next to error, this will disappear. but it comes when i assing a ibase to the request, so its working only when i create.
any sort of help will be appreciated.
Thanks
Gopi

Best Practice documentation for CRM Mobile Sales 5.0

Hi
Is there a configuration guide for CRM Mobile Sales 5.0? I can't seem to find it on SAP's web pages anywhere. If any of you have it, could you please send it to [email protected]?
I see that there has been some posts in the past about some kind of cook book. If this is the right document I'm not sure, but replies to this this post are appreciated
Thanks,
Dag

Hi Dag,
If you have access to the Service Marketplace (http://service.sap.com), select "Release & Upgrade Info" tab, click "Installation & Upgrades Guides" and then open "mySAP Business Suite Applications -> mySAP CRM -> SAP CRM 4.0 -> Mobile Client Installation Guides" section on the left navigator bar.
Please browse the link below(Blogs), here you can find the Mobile sales documents
/people/santosh.v/blog
/people/gregor.wolf3/blog/2005/10/09/setup-product-partner-ranges-ppr-for-mobile-sales-for-handheld-mso-hh
https://websmp102.sap-ag.de/~sapidb/011000358700004374292004E/MCT_Detail.htm
-->Media Library
Thanks,
Suriya.

Unable to transfer Business Partners from CRM to Handheld

Hi Guys,
I am setting up a mobile environment using ME2.1. The setup has successfully happened and now i am facing a problem on transferring master data from CRM to Handheld. I have done the following:-
1) Assigned the User of Mobile a business partner in Employee role
2) Assigned a position to the business partner at the Sales org level
3) Have done the basic settings for handheld, i.e. created a PPR applicable to accounts, Users and Products (All required business partners and products have been assigned to this PPR)
4) Added all the required business partners as my favourties
5) Created a Business partner as an organisation in maximum possible roles and used the business partner in the reference account while doing the basic settings for handheld.
6) Done relevant transaction type setting for transferring the transactional data
After all the above, now i can see transactional data on the handheld as well as products. However in the business partners tab, i can only see the employee attached to my user-id and nothing else.
Am i missing something out in the customizing? Please help me.
Regards
Ashish Gupta
Message was edited by: Ashish Gupta
Guys, need help urgently.. We are still stuck with the problem. Please help.

Hello Ashish Gupta,
unfortunately I can't help you with this problem. But can you give me some Links to Documentation for the Solution you implemented? Was the Documentation correct and usable? We are also currently implementing CRM 4.0 and find many inconsistencies.
Regards
Gregor

Tables in MSA & CRM

Hi all,
can any one tell me , whether CRM and MSA application use the same set of tables ? for example , CRM and MSA application use the same table for storing PPR data ? or there are different tables for each CRM and MSA ? Pls help.
Regards,
Ryan.

Hi Ankan,
thanks a lot for your reply.
can I access these MSA tables from CRM ?
I am new to MSA , pls help.
regards,
Ryan.

Dowloding product attributes / set type to Master Data in CRM 2007

We have created set-type and attribute in txn:COMM_ATTRSET.
Created set-type and assign attributes to them,you need to assign set-type to categories in txn:COMM_HIERARCHY by selecting the category.
And then you assign category to a product and hence your set-types are available to that product.
We are maintianing Attribute for COMPETITOR PRODUCT ( MAT_ZCPT as Category Hierarchy ). All Attributes are assigned to Competitor Product and Relationship is maintained with company Product .
What BApi or BAdi shgould be used .
When we are implementing BDC , SAP says from CRM 2007 they are not supporting GUI . Use existing BApi .
But we want to download more than 5000 Products . Please guide .
Regards,
Anup Reche

Hi Anup,
use the following bapi ;
BAPI_PPR_MAINTAIN:-This method allows the independent maintenance (create/change) of the following objects of Partner/Product Ranges (PPRs):
BAPI_PPR_MAINTAIN_40:-This method allows the independent maintenance (create/change/delete) of the following objects of Partner/Product Ranges (PPRs):
Badi:
PRODUCT_UPDATE2 -Obsolete: Create or Change Product
hope it will useful.
thanks
Hemant ghiya

PPR configuration for MSA

Hello Guys:
Do you have any guide which specifies the correct Partner Product Ranges configuration for MSA application, I have been looking into some guides but I have not been able to get a guide or document which explain in detail how this configuration works. I have not been able to download accounts to my HH and I think the PPR configuration must be set correctly to be able to download this configuration.
Hope you can help me out!!
Hugo

Hi,
yes there is a senario configuration guide which clearly explains how to do PPR sttings for BP and products, it has been modified for MSAHH5.0 but is also applicable to MSAHH4.0. please follow the following link.
Http://service.sap.com/instguides -> SAP Components -> SAP Solutions for Mobile Business -> Mobile Sales for Handheld (with CRM) ->MSA HH 5.0 (with CRM 4.0, SP 09)
It will definetely help
Warm regards
Anubhav Bhatia

Advantages of CRM 5.0 over 3 & 4.

Hi,
I would like to know the advantages / features of CRM 5.0 over 3.0 & 4.0.
Thanks in advance,
Jags.

Hi,
Following are some of the new features with CRM 5.0
-Employee directory,summary page, availability in PCUI, integaration with listing & territory mngt in account and contact mngt
-Trnsaction types configuration dependenton channels like mobile sales, interaction center
-Email integration, Quick create, calendor integration, interaction history for Activities
-BP and product templates
-PCUI for ECC sales transactions in SAP CRM
-multiple payment cards handling in sales trnsactions
-supports multiple promotions in sales order
-enhanced ATP check
-product proposal during sales trnsaction processing
-creadit rating check
-listing and exclusions based upon PPR's & condition techniques
-support of intercompany and multilevel intercompany billing
-additional territory attributes
-enhanced search and maintenance of territory structure
Allot pnts if it helps.
Cheers,
Raj

Crm 2007 - product by partner sales organization

hello
I'm trying to customize the following procedure:
1.Create opportunity or quotation,
2. enter a business partner (prospect/sold to)
Get the relevant product list to the specific partner (determind by the partner sales organization)
I read that the PPR procedure should be the answer, i tried it
and no luck.
can you please give an answer or a direction?
Thanks
Rika

hi jay..
If u got any solution for the same please provide us, it would be great help.as we are also facing the same problem.
and also give me step by step procedure to transfer the variant product from ecc to crm 2007.
any links any usefull material for variant product in crm 2007 will be highly appreciated.

PPR & Listings in CRM

Similar Messages

Maybe you are looking for