Primary RAC database hung on sqlplus as sysdba, dgmgrl and rman target

I need urgent help here, our qa environment is two nodes RAC primary, and two nodes standby.
Standby environment is ok, so far works, but no entries added to alert log.
however on primary rac, i cannot sqlplus to the db, and rman target hung, and dgmgrl hung.
I tried to srvctl stop database -o abort, it just hung there.
please help me to get that resolved.
Thanks in advance.

982335 wrote:
I need urgent help here, our qa environment is two nodes RAC primary, and two nodes standby.
Standby environment is ok, so far works, but no entries added to alert log.
however on primary rac, i cannot sqlplus to the db, and rman target hung, and dgmgrl hung.
I tried to srvctl stop database -o abort, it just hung there.
please help me to get that resolved.
Thanks in advance.check the primary alert log for error and paste here.
also do network connectivity test....e.g
lsnrctl status
from a client system do:
ping primary_ip
tnsping primary_tns
always make sure Abort and killing OS process is your last option!
Tobi

Similar Messages

  • Sqlplus as sysdba takes 3-4 mins

    Hi,
    I am trying to login to the database by using sqlplus as sysdba but it takes 3 to 4 mins to get the sql prompt. But for other users it does not take that much time.
    Could any one suggest me on this?
    Thanks
    Venkat

    user12052260 wrote:
    My problem has solved. Thanks.May be u should tell what exactly solved your problem, so that other users can also benefit from what you did. Just a suggestion.

  • Sqlplus / as sysdba hung state

    Hi All,
    When we try to do a sqlplus / as sysdba it gets into hung state.
    sapkxqap03:oraqs9 2> sqlplus / as sysdba
    SQL*Plus: Release 10.2.0.4.0 - Production on Wed Feb 16 19:06:28 2011
    Copyright (c) 1982, 2007, Oracle.  All Rights Reserved.
    We dont get anything after this prompt.Is there a way we can get to know as to what might be the issue.Thanks.

    Hi Michael,
    Nice to hear from you Michael.Long time.Thanks for the response
    Checked no archiver struck since the file systems have enough space.The problem is that alter log has not been updated for the past 1 week.R3trans also gets struck since it also uses sqlplus to login.Thanks.,
    4 ETW000 R3trans version 6.05 (release 46D - 04.12.08 - 14:43:00).
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: R3trans -d
    4 ETW000 date&time   : 16.02.2011 - 21:11:13
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [developertra,00000]  Wed Feb 16 21:11:13 2011
         232  0.000232
    4 ETW000  [developertra,00000]  db_con_init called
          14  0.000246
    4 ETW000  [developertra,00000]  create_con (con_name=R/3)
          34  0.000280
    4 ETW000  [developertra,00000]  Loading DB library '/usr/sap/QS9/SYS/exe/run/dbo
    raslib.so' ...
    4 ETW000
          30  0.000310
    4 ETW000  [developertra,00000]  load shared library (/usr/sap/QS9/SYS/exe/run/db
    oraslib.so), hdl 0
    4 ETW000
       15933  0.016243
    4 ETW000  [developertra,00000]  Library '/usr/sap/QS9/SYS/exe/run/dboraslib.so'
    sapkxqap03:qs9adm 3> more trans.log
    4 ETW000 R3trans version 6.05 (release 46D - 04.12.08 - 14:43:00).
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: R3trans -d
    4 ETW000 date&time   : 16.02.2011 - 21:11:13
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [developertra,00000]  Wed Feb 16 21:11:13 2011                             232  0.000232
    4 ETW000  [developertra,00000]  db_con_init called                                    14  0.000246
    4 ETW000  [developertra,00000]  create_con (con_name=R/3)                             34  0.000280
    4 ETW000  [developertra,00000]  Loading DB library '/usr/sap/QS9/SYS/exe/run/dboraslib.so' ...
    4 ETW000                                                                              30  0.000310
    4 ETW000  [developertra,00000]  load shared library (/usr/sap/QS9/SYS/exe/run/dboraslib.so), hdl 0
    4 ETW000                                                                           15933  0.016243
    4 ETW000  [developertra,00000]  Library '/usr/sap/QS9/SYS/exe/run/dboraslib.so' loaded
    4 ETW000                                                                              18  0.016261
    4 ETW000  [developertra,00000]  function DbSlExpFuns loaded from library /usr/sap/QS9/SYS/exe/run/dboraslib.so
    4 ETW000                                                                              22  0.016283
    4 ETW000  [developertra,00000]  Version of library '/usr/sap/QS9/SYS/exe/run/dboraslib.so' is "46D.00", patchlevel (0.2438)
    4 ETW000                                                                              99  0.016382
    4 ETW000  [developertra,00000]  function dsql_db_init loaded from library /usr/sap/QS9/SYS/exe/run/dboraslib.so
    4 ETW000                                                                              12  0.016394
    4 ETW000  [developertra,00000]  function dbdd_exp_funs loaded from library /usr/sap/QS9/SYS/exe/run/dboraslib.so
    4 ETW000                                                                              19  0.016413
    4 ETW000  [developertra,00000]  New connection 0 created                              17  0.016430
    4 ETW000  [developertra,00000]  db_con_connect (con_name=R/3)                         13  0.016443
    4 ETW000  [developertra,00000]  find_con found the following connection for reuse:
    4 ETW000                                                                              10  0.016453
    4 ETW000  [developertra,00000]  Got ORACLE_HOME=/oracle/QS9/102_64 from environment
    4 ETW000                                                                             434  0.016887
    4 ETW000  [developertra,00000]  -->oci_initialize                                     23  0.016910
    4 ETW000  [developertra,00000]  Got ORACLE_SID=QS9 from environment                   24  0.016934
    4 ETW000  [developertra,00000]  Got NLS_LANG=AMERICAN_AMERICA.WE8DEC from environment
    4 ETW000                                                                              13  0.016947
    4 ETW000  [developertra,00000]  Logon as OPS$-user to get SAPR3's password            11  0.016958
    4 ETW000  [developertra,00000]  Connecting as /@QS9 on connection 0 ... (dbsl 46D 220209)
    4 ETW000                                                                              15  0.016973
    4 ETW000  [developertra,00000]  -->oci_logon(con_hdl=0, user='', dbname='QS9')        15  0.016988

  • Upgradation of Primary (RAC) two node database and single node standby DB

    We have our primary setup in Oracle RAC in 10g R2 (10.2.0.1.0) in HP UX 11i 64bit (PA RISC). It is a two node RAC.
    And we have a single node standby database (DR).
    Both the primary and standby database are existing in 10.2.0.1.0
    We need to upgrade the primary and standby database from 10.2.0.1.0 to 10.2.0.4.0
    Am planning to go through the DBUA method for upgrading the database.
    I like to know is there any special cases for upgrading both the primary and standby database.
    since as i mentioned i will upgrade the database through dbua method, and if i upgrade my standby database as same as primary,
    will it forcefully open the database, because while we upgrade the database through dbua it will open the database at the end of installation.
    Is it possible to upgrade the standby database with DBUA method even when my standby database is in Mount state.
    I will be helpfull if anyone has done this earlier, are there any know issues and is there any good document which i can refer.
    with regards
    A.Aravind

    hi,
    thanks for your reply, and i was following the document.
    I like to know that is it mandatory to create a new Oracle Home for upgrading from 10.2.0.1.0 to 10.2.0.4.0
    or i can proceed the installation of software in the same oracle home.
    I will list out my action plan, please correct me if am wrong,
    In Primary RAC,
    a) Shutdown the database
    b) Shutdown the asm instance
    c) Stop the nodeapps services
    d) Stop the cluster ready services.
    e) Stop the enterprise manager
    f) Stop the isqlplus
    In Standby single node database,
    1)Cancel the managed Recovery process
    2) shutdown the database
    3) Shutdown the asm instance.
    PATCHING Process
    g) Apply the oracle clusterware patch 10.2.0.4.0 in the same old existing ORA_CRS_HOME
    h) Apply the oracle database software patch 10.2.0.4.0 in the same old existing ORACLE_HOME
    Note: In my case both the ORACLE_HOME and ASM_HOME are in the same location.
    i) Execute dbua to update the database in the primary database.
    j) Apply the 10.2.0.4.0 patch in standby database ORACLE_HOME where as ORACLE_HOME and ASM_HOME are in the same location
    k) Copy the recently generated archive logs from primary to standby manually and apply in standby database.
    l) Mount the database in standby
    m) Start the Managed recovery process.
    with regards
    A.Aravind

  • Manual creation of Oracle RAC Database

    Hello Guru's,
    I successfully installed Oracle Grid(clusterware) and Oracle RDBMS 11.2.0.1.0 for RAC containing 2 nodes on Linux 5.3 64 bit.
    All the clusterware services and ASM instance are running fine on both nodes.
    Now im planning to create database manually on node1 (RAC-NODE1).
    1) configure the environmental variables as follows
    export TMP=/tmp
    export ORACLE_HOSTNAME=`hostname`
    export ORACLE_SID=finance1
    export ORACLE_UNQNAME=finance
    export ORACLE_BASE=/rdbms1/app/oracle/
    export ORACLE_HOME=/rdbms1/app/oracle/product/11.2.0/db_home/
    export ORACLE_TERM=xterm
    export PATH=$ORACLE_HOME/bin:$PATH:.
    export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
    export CLASSPATH=$ORACLE_HOME/JRE:$ORACLE_HOME/jlib:$ORACLE_HOME/rdbms/jlib
    2) created the pfile and modified the parameters as follows
    db_name='finance'
    processes = 200
    audit_trail ='db'
    db_block_size=8192
    db_domain='vod.com'
    diagnostic_dest='/oradump/oradata/finance/dump'
    sessions=200
    remote_login_passwordfile='EXCLUSIVE'
    undo_tablespace='UNDOTBS1'
    control_files = +CTRL
    compatible ='11.2.0'
    job_queue_processes = 10
    undo_management = 'AUTO'
    finance1.instance_name = finance1
    db_create_file_dest = +DBFILE
    db_create_online_log_dest_1 = +REDO1
    db_create_online_log_dest_2 = +REDO2
    3) Created the password file as follows
    $ orapwd file=orapwfinance1 passwors=syspassword entries=10
    4) edit the /etc/oratab file as follows
    finance1:/rdbms1/app/oracle/product/11.2.0/db_home:N
    5) created the rac db script as follows.
    CREATE DATABASE FINANCE
    DATAFILE '+DBFILE' SIZE 500M
    AUTOEXTEND ON NEXT 50M MAXSIZE UNLIMITED
    EXTENT MANAGEMENT LOCAL
    SYSAUX DATAFILE '+DBFILE' SIZE 500M
    AUTOEXTEND ON NEXT 50M MAXSIZE UNLIMITED
    DEFAULT TEMPORARY TABLESPACE TEMP
    TEMPFILE '+DBFILE' SIZE 100M AUTOEXTEND ON NEXT 10M MAXSIZE 500M
    UNDO TABLESPACE UNDOTBS1
    DATAFILE '+DBFILE' SIZE 100M AUTOEXTEND ON NEXT 10M MAXSIZE 500M
    DEFAULT TABLESPACE USERDATA
    DATAFILE '+DBFILE' SIZE 100M AUTOEXTEND ON NEXT 10M MAXSIZE 500M
    LOGFILE
    GROUP 1 ('+REDO1','+REDO2') SIZE 20M,
    GROUP 2 ('+REDO1','+REDO2') SIZE 20M,
    GROUP 3 ('+REDO1','+REDO2') SIZE 20M
    MAXINSTANCES 8
    MAXLOGHISTORY 300
    MAXLOGFILES 64
    MAXLOGMEMBERS 5
    MAXDATAFILES 150
    USER SYS IDENTIFIED BY "sys_123"
    USER SYSTEM IDENTIFIED BY "system_123";
    6) started the instance as follows.
    $ sqlplus / as sysdba
    SQL> startup nomount
    ORACLE instance started.
    Total System Global Area 217157632 bytes
    Fixed Size 2211928 bytes
    Variable Size 159387560 bytes
    Database Buffers 50331648 bytes
    Redo Buffers 5226496 bytes
    SQL> @rac_db.sql
    CREATE DATABASE FINANCE
    ERROR at line 1:
    ORA-01501: CREATE DATABASE failed
    ORA-00200: control file could not be created
    ORA-00202: control file: '+CTRL'
    ORA-15045: ASM file name '+CTRL' is not in reference form
    ORA-17502: ksfdcre:5 Failed to create file +CTRL
    ORA-15081: failed to submit an I/O operation to a disk
    It shows that oracle unable to create control file on +CTRL diskgroup, i found that there is a problem with permissions on disks in diskgroups.
    brw-rw-r-- 1 grid asmadmin 8, 49 Apr 8 04:25 CTRLDISK1
    brw-rw-r-- 1 grid asmadmin 8, 50 Apr 8 04:25 CTRLDISK2
    brw-rw-r-- 1 grid asmadmin 8, 51 Apr 8 04:25 CTRLDISK3
    brw-rw-r-- 1 grid asmadmin 8, 52 Apr 8 04:25 CTRLDISK4
    since all the disks in diskgroup has 664 permision and owned by grid user primary group is asmadmin.
    # id grid
    uid=1001(grid) gid=501(oinstall) groups=501(oinstall),504(asmadmin),505(asmdba),506(asmoper)
    # id oracle
    uid=1002(oracle) gid=501(oinstall) groups=501(oinstall),502(dba),503(oper),505(asmdba)
    please help me to overcome the above problem.
    regards,

    Thanks for comments,
    I successfully created the database, once i restared the database it is unbale to mount because of unbale to open +CTRL group file.
    SQL> startup
    ORACLE instance started.
    Total System Global Area 217157632 bytes
    Fixed Size 2211928 bytes
    Variable Size 159387560 bytes
    Database Buffers 50331648 bytes
    Redo Buffers 5226496 bytes
    ORA-00205: error in identifying control file, check alert log for more info
    alert log:
    ORACLE_BASE from environment = /rdbms1/app/oracle/
    Thu Apr 11 09:36:34 2013
    ALTER DATABASE MOUNT
    ORA-00210: cannot open the specified control file
    ORA-00202: control file: '+CTRL'
    ORA-17503: ksfdopn:2 Failed to open file +CTRL
    ORA-15045: ASM file name '+CTRL' is not in reference form
    ORA-205 signalled during: ALTER DATABASE MOUNT...
    Thu Apr 11 09:36:42 2013
    NOTE: initiating MARK startup
    raw devices:
    # ls -l /dev/sd*
    brw-rw-r-- 1 grid asmadmin 8, 16 Apr 11 09:04 /dev/sdb
    brw-rw-r-- 1 grid asmadmin 8, 17 Apr 11 09:51 /dev/sdb1
    brw-rw-r-- 1 grid asmadmin 8, 18 Apr 11 09:51 /dev/sdb2
    brw-rw-r-- 1 grid asmadmin 8, 19 Apr 11 09:51 /dev/sdb3
    brw-rw-r-- 1 grid asmadmin 8, 20 Apr 11 09:45 /dev/sdb4
    brw-rw-r-- 1 grid asmadmin 8, 32 Apr 11 09:04 /dev/sdc
    brw-rw-r-- 1 grid asmadmin 8, 33 Apr 11 09:30 /dev/sdc1
    brw-rw-r-- 1 grid asmadmin 8, 34 Apr 11 09:30 /dev/sdc2
    brw-rw-r-- 1 grid asmadmin 8, 35 Apr 11 09:30 /dev/sdc3
    brw-rw-r-- 1 grid asmadmin 8, 36 Apr 11 09:05 /dev/sdc4
    brw-rw-r-- 1 grid asmadmin 8, 48 Apr 11 09:04 /dev/sdd
    brw-rw-r-- 1 grid asmadmin 8, 49 Apr 11 09:51 /dev/sdd1
    brw-rw-r-- 1 grid asmadmin 8, 50 Apr 11 09:51 /dev/sdd2
    brw-rw-r-- 1 grid asmadmin 8, 51 Apr 11 09:51 /dev/sdd3
    brw-rw-r-- 1 grid asmadmin 8, 52 Apr 11 09:30 /dev/sdd4
    brw-rw-r-- 1 grid asmadmin 8, 64 Apr 11 09:04 /dev/sde
    brw-rw-r-- 1 grid asmadmin 8, 65 Apr 11 09:51 /dev/sde1
    brw-rw-r-- 1 grid asmadmin 8, 66 Apr 11 09:51 /dev/sde2
    brw-rw-r-- 1 grid asmadmin 8, 67 Apr 11 09:51 /dev/sde3
    brw-rw-r-- 1 grid asmadmin 8, 68 Apr 11 09:30 /dev/sde4
    brw-rw-r-- 1 grid asmadmin 8, 80 Apr 11 09:04 /dev/sdf
    brw-rw-r-- 1 grid asmadmin 8, 81 Apr 11 09:51 /dev/sdf1
    brw-rw-r-- 1 grid asmadmin 8, 82 Apr 11 09:51 /dev/sdf2
    brw-rw-r-- 1 grid asmadmin 8, 83 Apr 11 09:51 /dev/sdf3
    brw-rw-r-- 1 grid asmadmin 8, 84 Apr 11 09:30 /dev/sdf4
    brw-rw-r-- 1 grid asmadmin 8, 96 Apr 11 09:04 /dev/sdg
    brw-rw-r-- 1 grid asmadmin 8, 97 Apr 11 09:51 /dev/sdg1
    brw-rw-r-- 1 grid asmadmin 8, 98 Apr 11 09:51 /dev/sdg2
    brw-rw-r-- 1 grid asmadmin 8, 99 Apr 11 09:51 /dev/sdg3
    brw-rw-r-- 1 grid asmadmin 8, 100 Apr 11 09:30 /dev/sdg4
    brw-rw-r-- 1 grid asmadmin 8, 112 Apr 11 09:04 /dev/sdh
    brw-rw-r-- 1 grid asmadmin 8, 113 Apr 11 09:51 /dev/sdh1
    brw-rw-r-- 1 grid asmadmin 8, 114 Apr 11 09:51 /dev/sdh2
    brw-rw-r-- 1 grid asmadmin 8, 115 Apr 11 09:51 /dev/sdh3
    brw-rw-r-- 1 grid asmadmin 8, 116 Apr 11 09:30 /dev/sdh4
    asm disks:
    [09:52 AM [email protected] disks]# ll
    brw-rw-r-- 1 grid asmadmin 8, 65 Apr 11 09:05 ARCLOGDISK1
    brw-rw-r-- 1 grid asmadmin 8, 66 Apr 11 09:05 ARCLOGDISK2
    brw-rw-r-- 1 grid asmadmin 8, 67 Apr 11 09:05 ARCLOGDISK3
    brw-rw-r-- 1 grid asmadmin 8, 68 Apr 11 09:05 ARCLOGDISK4
    brw-rw-r-- 1 grid asmadmin 8, 49 Apr 11 09:05 CTRLDISK1
    brw-rw-r-- 1 grid asmadmin 8, 50 Apr 11 09:05 CTRLDISK2
    brw-rw-r-- 1 grid asmadmin 8, 51 Apr 11 09:05 CTRLDISK3
    brw-rw-r-- 1 grid asmadmin 8, 52 Apr 11 09:05 CTRLDISK4
    brw-rw-r-- 1 grid asmadmin 8, 33 Apr 11 09:05 DBFILEDISK1
    brw-rw-r-- 1 grid asmadmin 8, 34 Apr 11 09:05 DBFILEDISK2
    brw-rw-r-- 1 grid asmadmin 8, 35 Apr 11 09:05 DBFILEDISK3
    brw-rw-r-- 1 grid asmadmin 8, 36 Apr 11 09:05 DBFILEDISK4
    brw-rw-r-- 1 grid asmadmin 8, 113 Apr 11 09:05 FRADISK1
    brw-rw-r-- 1 grid asmadmin 8, 114 Apr 11 09:05 FRADISK2
    brw-rw-r-- 1 grid asmadmin 8, 115 Apr 11 09:05 FRADISK3
    brw-rw-r-- 1 grid asmadmin 8, 116 Apr 11 09:05 FRADISK4
    brw-rw-r-- 1 grid asmadmin 8, 81 Apr 11 09:05 REDODISK1
    brw-rw-r-- 1 grid asmadmin 8, 82 Apr 11 09:05 REDODISK2
    brw-rw-r-- 1 grid asmadmin 8, 83 Apr 11 09:05 REDODISK3
    brw-rw-r-- 1 grid asmadmin 8, 84 Apr 11 09:05 REDODISK4
    brw-rw-r-- 1 grid asmadmin 8, 97 Apr 11 09:05 REDODISK5
    brw-rw-r-- 1 grid asmadmin 8, 98 Apr 11 09:05 REDODISK6
    brw-rw-r-- 1 grid asmadmin 8, 99 Apr 11 09:05 REDODISK7
    brw-rw-r-- 1 grid asmadmin 8, 100 Apr 11 09:05 REDODISK8
    brw-rw-r-- 1 grid asmadmin 8, 17 Apr 11 09:05 VOTEDISK1
    brw-rw-r-- 1 grid asmadmin 8, 18 Apr 11 09:05 VOTEDISK2
    brw-rw-r-- 1 grid asmadmin 8, 19 Apr 11 09:05 VOTEDISK3
    brw-rw-r-- 1 grid asmadmin 8, 20 Apr 11 09:05 VOTEDISK4
    [09:53 AM [email protected] ~]# ls -l /rdbms1/app/oracle/product/11.2.0/db_home/bin/oracle
    -rwsr-s--x 1 oracle asmadmin 210824720 Apr 8 13:39 /rdbms1/app/oracle/product/11.2.0/db_home/bin/oracle
    I know this problem is coming for improper assiging of permissions, but i could not pin point. kindly clarify the same.
    one more thing i need to know.., whenever i rebooted nodes, both of raw devices and asm disks are come to default permission brw------, i have to change every time to brw-rw-r--. is there any way to make these disks and devices permissions make permenet.
    Thanks in advance.

  • Not able to start one rac database

    We had a 4 node RAC(11.2) environment in RH Linux.
    it was running fine. By mistake we change the owner of the mount point where oracle clusterware and database installed on first node.
    chown -R oracle:oinstall /u01
    chmod -R 775 /u01
    Due to this all services went down.
    Later we change the owner, as it is on node2 and restart the services and server.
    Now all the services are working fine. But oracle database is not coming up.
    It is not able to read the spfile from ASM.
    It is giving the error:
    [oracle@ch-racsvr1 trace]$ sqlplus / as sysdba
    SQL*Plus: Release 11.2.0.1.0 Production on Wed Oct 6 21:52:27 2010
    Copyright (c) 1982, 2009, Oracle. All rights reserved.
    Connected to an idle instance.
    SQL> startup
    ORA-01078: failure in processing system parameters
    ORA-01565: error in identifying file '+ORA_DATA/sgspace/spfilesgspace.ora'
    ORA-17503: ksfdopn:2 Failed to open file +ORA_DATA/sgspace/spfilesgspace.ora
    ORA-01034: ORACLE not available
    ORA-27123: unable to attach to shared memory segment
    Linux-x86_64 Error: 13: Permission denied
    Additional information: 7077890
    Additional information: 10
    Please suggest, as i Think it is permissions issues. some file have permissions as rwsr-s--x in other nodes.

    Hi;
    You have related permisson on your path? You have permisson error.
    By the way i suggest move your thread to Forum Home » Grid Computing » Real Application Clusters which you could get more quick response
    Regard
    Helios

  • RAC database cannot be connected after Grid and RAC DB have been installed

    Folks,
    Hello. I am installing Oracle 11gR2 RAC using 2 VMs (main VM rac1 and slave VM rac2) with Oracle Linux 5.6
    according to the website http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
    Grid and RAC database have been installed successfully for both VMs rac1 and rac2. I am using the slave VM rac2 to test Grid and RAC database.
    I have run the commands as below:
    [ora11g@rac2 bin]$ pwd
    /u01/app/grid/bin
    [ora11g@rac2 bin]$ ./crsctl status resource
    CRS-4535: Cannot communicate with Cluster Ready Services
    CRS-4000: Command Status failed, or completed with errors.
    [ora11g@rac2 bin]$ ./srvctl config database -d racdb
    PRCD-1027 : Failed to retrieve database racdb
    PRCR-1070 : Failed to check if resource ora.racdb.db is registered
    Cannot communicate with crsd
    [ora11g@rac2 bin]$ ./sqlplus SYS/SYS
    SQL*Plus: Release 11.2.0.1.0 Production on Sat Mar 10 14:07:07 2012
    Copyright (c) 1982, 2009, Oracle. All rights reserved.
    ERROR:
    ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux-x86_64 Error: 2: No such file or directory
    Process ID: 0
    Session ID: 0 Serial number: 0
    Enter user-name: SYS
    Enter password:
    ERROR:
    ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux-x86_64 Error: 2: No such file or directory
    Process ID: 0
    Session ID: 0 Serial number: 0
    Enter user-name: SYSTEM
    Enter password:
    ERROR:
    ORA-01034: ORACLE not available
    ORA-27101: shared memory realm does not exist
    Linux-x86_64 Error: 2: No such file or directory
    Process ID: 0
    Session ID: 0 Serial number: 0
    SP2-0157: unable to CONNECT to ORACLE after 3 attempts, exiting SQL*Plus
    [ora11g@rac2 /]$ /u02/11g_db/ora11g/racdb/sqldeveloper/sqldeveloper.sh
    In its GUI, the inputs are below:
    Connection: C1
    Username: SYS
    PWD: SYS
    Role: SYSDBA
    Connection Type: Basic
    Hostname: rac2.localdomain
    Port: 1521
    SID: racdb2
    Test: failed. Network Adapter could not establish connection.
    Browser url: https://rac2.localdomain:1158/em
    Its output: cannot connect to the server at https://rac2.localdomain:1158/em
    As we see the outputs for commands above, Grid is running at the beginning but now is not running. SQLPLUS and SQLdeveloper cannot connect with database. Browser url cannot connect to the console https://rac2.localdomain:1158/em.
    My question is:
    Do any folks understand how to solve the above 4 problems ?
    Thanks.

    Folks,
    Hello. Thanks a lot for replying. The last 50 lines of the file "ocssd.log" is as below:
    [ora11g@rac1 cssd]$ pwd
    /u01/app/grid/log/rac1/cssd
    [ora11g@rac1 cssd]$ ls
    cssdOUT.log ocssd.log ocssd.trc
    [ora11g@rac1 cssd]$ cat ocssd.log
    2012-03-08 21:13:54.415: [    CLSF][1150617920]Destroying CLSF context
    2012-03-08 21:13:55.418: [    CLSF][1150617920]Allocated CLSF context
    2012-03-08 21:13:55.418: [   SKGFD][1150617920]Handle 0x7105660 from lib :ASM:/opt/oracle/extapi/64/asm/orcl/1/libasm.so: for disk :ORCL:ASMDISK1:
    2012-03-08 21:13:55.418: [    CLSF][1150617920]Opened hdl:0x710d800 for dev:ORCL:ASMDISK1:
    2012-03-08 21:13:55.470: [    CLSF][1150617920]Closing handle:0x710d800
    2012-03-08 21:13:55.470: [   SKGFD][1150617920]Lib :ASM:/opt/oracle/extapi/64/asm/orcl/1/libasm.so: closing handle 0x7105660 for disk :ORCL:ASMDISK1:
    2012-03-08 21:13:55.470: [    CLSF][1150617920]Destroying CLSF context
    2012-03-08 21:13:56.472: [    CSSD][1685425920]clssnmlfmtlease: uniqueness 1331259161, gipc addr nm_rac-scan#192.168.137.35#36456
    2012-03-08 21:13:56.608: [    CSSD][1685425920]clssnmvStatusBlkInit: myinfo nodename rac1, uniqueness 0
    2012-03-08 21:13:56.697: [    CSSD][1685425920]clssnmvStatusBlkInit: myinfo nodename rac1, uniqueness 0
    2012-03-08 21:13:56.754: [    CSSD][1685425920]clssnmvStatusBlkInit: myinfo nodename rac1, uniqueness 0
    2012-03-08 21:13:57.425: [    CSSD][1685425920]clssnmlgetslot:lease acquisition for node rac1/slot 1 completed in 19380 msecs
    2012-03-08 21:13:57.559: [    CSSD][1685425920]clssnmvDHBValidateNCopy: node 1, , has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 89443, LATS 4294905400, lastSeqNo 89443, uniqueness 0, timestamp 1331258081/38436564
    2012-03-08 21:13:57.559: [    CSSD][1685425920]clssnmvDHBValidateNCopy: node 2, , has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 80216, LATS 4294905400, lastSeqNo 80216, uniqueness 1331259094, timestamp 1331259236/4294905820
    2012-03-08 21:13:57.860: [    CSSD][1685425920]clssnmvDHBValidateNCopy: node 1, rac1, has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 89444, LATS 4294905700, lastSeqNo 89444, uniqueness 0, timestamp 1331258081/38436564
    2012-03-08 21:13:57.860: [    CSSD][1685425920]clssnmvDHBValidateNCopy: node 2, rac2, has a disk HB, but no network HB, DHB has rcfg 226426240, wrtcnt, 80217, LATS 4294905700, lastSeqNo 80217, uniqueness 1331259094, timestamp 1331259237/4294906920
    2012-03-08 21:13:58.049: [    CSSD][1685425920]clssnmvDHBValidate2012-03-10 12:07:08.298: [    CSSD][471957248]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331399227
    2012-03-10 12:07:08.300: [    CSSD][471957248]clssscmain: Environment is production
    2012-03-10 12:07:08.300: [    CSSD][471957248]clssscmain: Core file size limit extended
    2012-03-10 12:07:08.518: [    CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
    2012-03-10 12:07:08.518: [    CSSD][471957248]clssscSetPrivEnv: IPMI device not installed on this node
    2012-03-10 12:07:08.519: [    CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
    2012-03-10 12:07:09.675: [    CSSD][471957248]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
    2012-03-10 12:07:09.675: [    CSSD][471957248]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
    2012-03-10 12:07:09.675: [    CSSD][471957248]clssscmain: Running as user ora11g
    [  clsdmt][1088276800]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
    2012-03-10 12:07:09.821: [  clsdmt][1088276800]PID for the Process [5971], connkey 4
    2012-03-10 12:07:09.822: [    CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
    2012-03-10 12:07:09.823: [    CSSD][471957248]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
    2012-03-10 12:07:09.847: [    CSSD][471957248]clssscmain: initgminfo done
    2012-03-10 12:07:09.971: [    CSSD][1098766656]clssgmclientlsnr: Spawned
    2012-03-10 12:07:09.971: [    CSSD][1098766656]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
    2012-03-10 12:07:09.971: [    CSSD][1098766656]clssgmEvtInformation: reqtype (13) req (0xadd7b20)
    2012-03-10 12:07:09.971: [    CSSD][1098766656]clssnmQueueNotification: type (13) 0xadd7b20
    2012-03-10 12:07:09.973: [    CSSD][1098766656]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
    2012-03-10 12:07:09.975: [    CSSD][1098766656]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=903cec19-00000000-5971))
    2012-03-10 12:07:09.975: [    GPnP][471957248]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
    2012-03-10 12:07:09.975: [    GPnP][471957248]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
    2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0xade1aa0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e1fdf67e-e0b9ca68-5971))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e0b9ca68-e1fdf67e-5976))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x1758, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
    2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos op : mkdir
    2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
    2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos loc : authprep6
    2012-03-10 12:07:10.044: [GIPCCLSA][1098766656]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A2370613
    2012-03-10 12:07:10.045: [GIPCXCPT][1098766656]gipcmodMuxTransferAccept: internal accept request failed endp 0xade0740 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=903cec19-00000000-5971))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
    2012-03-10 12:07:10.045: [ GIPCMUX][1098766656]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0xade0740 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=903cec19-00000000-5971))', remoteAddr '', numPend 02012-03-10 12:21:34.610: [    CSSD][4216872704]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331400094
    2012-03-10 12:21:34.612: [    CSSD][4216872704]clssscmain: Environment is production
    2012-03-10 12:21:34.612: [    CSSD][4216872704]clssscmain: Core file size limit extended
    2012-03-10 12:21:34.675: [    CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
    2012-03-10 12:21:34.675: [    CSSD][4216872704]clssscSetPrivEnv: IPMI device not installed on this node
    2012-03-10 12:21:34.676: [    CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
    2012-03-10 12:21:34.770: [    CSSD][4216872704]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
    2012-03-10 12:21:34.770: [    CSSD][4216872704]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
    2012-03-10 12:21:34.771: [    CSSD][4216872704]clssscmain: Running as user ora11g
    [  clsdmt][1123064128]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
    2012-03-10 12:21:37.926: [  clsdmt][1123064128]PID for the Process [6687], connkey 4
    2012-03-10 12:21:38.276: [    CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
    2012-03-10 12:21:38.276: [    CSSD][4216872704]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
    2012-03-10 12:21:39.171: [    CSSD][4216872704]clssscmain: initgminfo done
    2012-03-10 12:21:42.815: [    CSSD][1144043840]clssgmclientlsnr: Spawned
    2012-03-10 12:21:42.815: [    CSSD][1144043840]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
    2012-03-10 12:21:42.815: [    CSSD][1144043840]clssgmEvtInformation: reqtype (13) req (0x1a5a7160)
    2012-03-10 12:21:42.815: [    CSSD][1144043840]clssnmQueueNotification: type (13) 0x1a5a7160
    2012-03-10 12:21:42.822: [    CSSD][1144043840]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
    2012-03-10 12:21:42.872: [    CSSD][1144043840]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=45c3536d-00000000-6687))
    2012-03-10 12:21:42.873: [    GPnP][4216872704]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
    2012-03-10 12:21:42.873: [    GPnP][4216872704]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
    2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x1a5b10e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=c53aa194-7b930898-6687))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=7b930898-c53aa194-5928))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x1728, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
    2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos op : mkdir
    2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
    2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos loc : authprep6
    2012-03-10 12:21:43.190: [GIPCCLSA][1144043840]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A3702366
    2012-03-10 12:21:43.201: [GIPCXCPT][1144043840]gipcmodMuxTransferAccept: internal accept request failed endp 0x1a5afd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=45c3536d-00000000-6687))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
    2012-03-10 12:21:43.201: [ GIPCMUX][1144043840]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x1a5afd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=45c3536d-00000000-6687))', remot2012-03-11 11:17:15.417: [    CSSD][1249378048]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331479035
    2012-03-11 11:17:15.418: [    CSSD][1249378048]clssscmain: Environment is production
    2012-03-11 11:17:15.418: [    CSSD][1249378048]clssscmain: Core file size limit extended
    2012-03-11 11:17:15.797: [    CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
    2012-03-11 11:17:15.797: [    CSSD][1249378048]clssscSetPrivEnv: IPMI device not installed on this node
    2012-03-11 11:17:15.798: [    CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
    2012-03-11 11:17:17.472: [    CSSD][1249378048]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
    2012-03-11 11:17:17.472: [    CSSD][1249378048]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
    2012-03-11 11:17:17.473: [    CSSD][1249378048]clssscmain: Running as user ora11g
    [  clsdmt][1098090816]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
    2012-03-11 11:17:17.517: [  clsdmt][1098090816]PID for the Process [5960], connkey 4
    2012-03-11 11:17:17.573: [    CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
    2012-03-11 11:17:17.574: [    CSSD][1249378048]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
    2012-03-11 11:17:17.586: [    CSSD][1249378048]clssscmain: initgminfo done
    2012-03-11 11:17:17.617: [    CSSD][1141242176]clssgmclientlsnr: Spawned
    2012-03-11 11:17:17.617: [    CSSD][1141242176]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
    2012-03-11 11:17:17.617: [    CSSD][1141242176]clssgmEvtInformation: reqtype (13) req (0x129d5160)
    2012-03-11 11:17:17.617: [    CSSD][1141242176]clssnmQueueNotification: type (13) 0x129d5160
    2012-03-11 11:17:17.619: [    CSSD][1141242176]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
    2012-03-11 11:17:17.621: [    CSSD][1141242176]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=38fc0b43-00000000-5960))
    2012-03-11 11:17:17.621: [    GPnP][1249378048]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
    2012-03-11 11:17:17.621: [    GPnP][1249378048]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
    2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x129df0e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=22574215-7bcb9bab-5960))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=7bcb9bab-22574215-5919))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x171f, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
    2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos op : mkdir
    2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
    2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos loc : authprep6
    2012-03-11 11:17:18.167: [GIPCCLSA][1141242176]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A2554722
    2012-03-11 11:17:18.168: [GIPCXCPT][1141242176]gipcmodMuxTransferAccept: internal accept request failed endp 0x129ddd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=38fc0b43-00000000-5960))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
    2012-03-11 11:17:18.168: [ GIPCMUX][1141242176]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x129ddd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=38fc0b43-00000000-5960))', remot2012-03-11 13:50:45.588: [    CSSD][1847344896]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331488245
    2012-03-11 13:50:45.589: [    CSSD][1847344896]clssscmain: Environment is production
    2012-03-11 13:50:45.589: [    CSSD][1847344896]clssscmain: Core file size limit extended
    2012-03-11 13:50:45.812: [    CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
    2012-03-11 13:50:45.812: [    CSSD][1847344896]clssscSetPrivEnv: IPMI device not installed on this node
    2012-03-11 13:50:45.813: [    CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
    2012-03-11 13:50:46.364: [    CSSD][1847344896]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
    2012-03-11 13:50:46.364: [    CSSD][1847344896]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
    2012-03-11 13:50:46.365: [    CSSD][1847344896]clssscmain: Running as user ora11g
    [  clsdmt][1106819392]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
    2012-03-11 13:50:46.512: [  clsdmt][1106819392]PID for the Process [5598], connkey 4
    2012-03-11 13:50:46.518: [    CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
    2012-03-11 13:50:46.521: [    CSSD][1847344896]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
    2012-03-11 13:50:46.548: [    CSSD][1847344896]clssscmain: initgminfo done
    2012-03-11 13:50:46.611: [    CSSD][1090939200]clssgmclientlsnr: Spawned
    2012-03-11 13:50:46.611: [    CSSD][1090939200]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
    2012-03-11 13:50:46.611: [    CSSD][1090939200]clssgmEvtInformation: reqtype (13) req (0x196b6160)
    2012-03-11 13:50:46.611: [    CSSD][1090939200]clssnmQueueNotification: type (13) 0x196b6160
    2012-03-11 13:50:46.618: [    CSSD][1090939200]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
    2012-03-11 13:50:46.621: [    CSSD][1090939200]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e5a0c08e-00000000-5598))
    2012-03-11 13:50:46.621: [    GPnP][1847344896]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
    2012-03-11 13:50:46.622: [    GPnP][1847344896]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
    2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x196c00e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=629302b2-9f0ad2aa-5598))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=9f0ad2aa-629302b2-5616))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x15f0, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
    2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos op : mkdir
    2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
    2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos loc : authprep6
    2012-03-11 13:50:47.158: [GIPCCLSA][1090939200]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A8205079
    2012-03-11 13:50:47.159: [GIPCXCPT][1090939200]gipcmodMuxTransferAccept: internal accept request failed endp 0x196bed80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e5a0c08e-00000000-5598))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
    2012-03-11 13:50:47.159: [ GIPCMUX][1090939200]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x196bed80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=e5a0c08e-00000000-5598))', remot2012-03-11 14:15:32.370: [    CSSD][2372304640]clssscmain: Starting CSS daemon, version 11.2.0.1.0, in (clustered) mode with uniqueness value 1331489730
    2012-03-11 14:15:32.383: [    CSSD][2372304640]clssscmain: Environment is production
    2012-03-11 14:15:32.384: [    CSSD][2372304640]clssscmain: Core file size limit extended
    2012-03-11 14:15:32.933: [    CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter logsize (8) failed with rc 21
    2012-03-11 14:15:32.933: [    CSSD][2372304640]clssscSetPrivEnv: IPMI device not installed on this node
    2012-03-11 14:15:32.935: [    CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter priority (15) failed with rc 21
    2012-03-11 14:15:48.413: [    CSSD][2372304640]clssscExtendLimits: The current soft limit for file descriptors is 65536, hard limit is 65536
    2012-03-11 14:15:48.413: [    CSSD][2372304640]clssscExtendLimits: The current soft limit for locked memory is 4294967295, hard limit is 4294967295
    2012-03-11 14:15:48.421: [    CSSD][2372304640]clssscmain: Running as user ora11g
    [  clsdmt][1119824192]Listening to (ADDRESS=(PROTOCOL=ipc)(KEY=rac1DBG_CSSD))
    2012-03-11 14:16:21.102: [  clsdmt][1119824192]PID for the Process [7155], connkey 4
    2012-03-11 14:16:22.219: [    CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter auth rep (9) failed with rc 21
    2012-03-11 14:16:22.221: [    CSSD][2372304640]clssscGetParameterOLR: OLR fetch for parameter diagwait (14) failed with rc 21
    2012-03-11 14:16:27.367: [    CSSD][2372304640]clssscmain: initgminfo done
    2012-03-11 14:16:43.377: [    CSSD][1140803904]clssgmclientlsnr: Spawned
    2012-03-11 14:16:43.378: [    CSSD][1140803904]clssgmEvtInformation: reqtype (13) cmProc ((nil)) client ((nil))
    2012-03-11 14:16:43.378: [    CSSD][1140803904]clssgmEvtInformation: reqtype (13) req (0x6964160)
    2012-03-11 14:16:43.378: [    CSSD][1140803904]clssnmQueueNotification: type (13) 0x6964160
    2012-03-11 14:16:43.389: [    CSSD][1140803904]clssscGetParameterOLR: OLR fetch for parameter GIPC client trclvl (13) failed with rc 21
    2012-03-11 14:16:43.554: [    CSSD][1140803904]clssgmclientlsnr: listening on clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=f8ea6223-00000000-7155))
    2012-03-11 14:16:43.555: [    GPnP][2372304640]clsgpnp_Init: [at clsgpnp0.c:404] gpnp tracelevel 3, component tracelevel 0
    2012-03-11 14:16:43.555: [    GPnP][2372304640]clsgpnp_Init: [at clsgpnp0.c:534] '/u01/app/grid' in effect as GPnP home base.
    2012-03-11 14:16:44.146: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: failed on clsaauthstart ret clsaretOSD (8), endp 0x696e0e0 [000000000000002f] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=0448e4a3-ad06465f-7155))', remoteAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=ad06465f-0448e4a3-7132))', numPend 5, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x1bdc, pidPeer 0, flags 0x603710, usrFlags 0x14000 }
    2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos op : mkdir
    2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos dep : No space left on device (28)
    2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos loc : authprep6
    2012-03-11 14:16:44.147: [GIPCCLSA][1140803904]gipcmodClsaCompleteAccept: slos info: failed to make dir /u01/app/grid/auth/css/rac1/A8989982
    2012-03-11 14:16:44.147: [GIPCXCPT][1140803904]gipcmodMuxTransferAccept: internal accept request failed endp 0x696cd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=f8ea6223-00000000-7155))', remoteAddr '', numPend 0, numReady 0, numDone 0, numDead 0, numTransfer 0, objFlags 0x0, pidPeer 0, flags 0x30613, usrFlags 0x10010 }, ret gipcretAuthFail (22)
    2012-03-11 14:16:44.147: [ GIPCMUX][1140803904]gipcmodMuxTransferAccept: EXCEPTION[ ret gipcretAuthFail (22) ] error during accept on endp 0x696cd80 [000000000000001b] { gipcEndpoint : localAddr 'clsc://(ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_rac1_)(GIPCID=f8ea6223-00000000-7155))', remoteAddr[ora11g@rac1 cssd]$
    My question is:
    Could any folk find out the problem that Grid becomes not running after install RAC database ?
    Thanks.

  • Problem starting RAC database instance on Node 2

    Hi all,
    I have the following problem after installing RAC 10.2.0 with 2 nodes (clusternode1 & clusternode2).
    I'll greatly appreciate if someone could help fix this:
    oracle@clusternode2:~> srvctl status nodeapps -n clusternode1
    VIP is running on node: clusternode1
    GSD is running on node: clusternode1
    Listener is running on node: clusternode1
    ONS daemon is running on node: clusternode1
    oracle@clusternode2:~> srvctl status nodeapps -n clusternode2
    VIP is running on node: clusternode2
    GSD is running on node: clusternode2
    Listener is running on node: clusternode2
    ONS daemon is running on node: clusternode2
    oracle@clusternode2:~>
    oracle@clusternode2:~> srvctl status asm -n clusternode1
    ASM instance +ASM1 is running on node clusternode1.
    oracle@clusternode2:~> srvctl status asm -n clusternode2
    ASM instance +ASM2 is running on node clusternode2.
    oracle@clusternode2:~>
    oracle@clusternode2:~> srvctl status database -d orcl
    Instance orcl1 is running on node clusternode1
    Instance orcl2 is not running on node clusternode2 <-------Here is the problem!!!!!!!!!!!!!!!!
    oracle@clusternode2:~>
    So when I try to start the orcl2 instance I receive:
    oracle@clusternode2:~> srvctl start instance -d orcl -i orcl2
    PRKP-1001 : Error starting instance orcl2 on node clusternode2
    CRS-0215: Could not start resource 'ora.orcl.orcl2.inst'.
    oracle@clusternode2:~>
    I tried to do it per SQL*PLus:
    oracle@clusternode2:~> echo $ORACLE_SID
    orcl2
    oracle@clusternode2:~> sqlplus "/as sysdba"
    SQL*Plus: Release 10.2.0.1.0 - Production on Mon Mar 27 21:08:59 2006
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to an idle instance.
    SQL> startup
    ORA-01078: failure in processing system parameters
    ORA-01565: error in identifying file '+ORCLDATAGRP1/orcl/spfileorcl.ora'
    ORA-17503: ksfdopn:2 Failed to open file +ORCLDATAGRP1/orcl/spfileorcl.ora
    ORA-15077: could not locate ASM instance serving a required diskgroup
    SQL>
    But ASM is there and running !!!!!!!!!!!
    Thanks very much for any tip how to get ride of this problem.
    Kind regards.
    Askia.

    muba_zak wrote:
    Thanks John,
    How the cron jobs takes care, is there any different is there between Admin Managed & Policy Managed
    Thanks.
    Muba
    I don't know what your cron jobs do. If (for example) they logon to the database through a service published by the scan listeners, they will be happy. If they logon using a deterministic connect string, you have a problem - a problem caused by mis-using the system.

  • Oracle instance is running but sqlplus "/as sysdba" says connected to idle.

    Hi,
    Oracle RAC is running(started the RAC using "srvctl start database -d hacmp") but when i am trying to connect to database using sqlplus "/as sysdba" it says "connected to idle instance".
    Any idea what could be the issue here?
    I have ORACLE_SID exported.
    bash-3.00$ ps -ef | grep pmon
    oracle 507946 798870 0 17:23:42 pts/0 0:00 grep pmon
    oracle 872584 1 0 17:03:16 - 0:00 ora_pmon_hacmp1
    bash-3.00$ echo $ORACLE_HOME
    /u01/app/oracle/
    bash-3.00$
    bash-3.00$ echo $ORACLE_SID
    hacmp1
    bash-3.00$
    bash-3.00$
    bash-3.00$ sqlplus "/as sysdba"
    SQL*Plus: Release 10.2.0.4.0 - Production on Mon Sep 14 17:24:43 2009
    Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
    Connected to an idle instance.
    SQL

    It's not a SQL*Plus bug but a Oracle feature: when you try to connect to a local Oracle instance Oracle computes the shared memory key (used by the instance SGA) using ORACLE_HOME and ORACLE_SID: if you add a character to ORACLE_HOME, the shared memory key will be different and Oracle does not find the instance and says "connected to an idle instance".

  • Why sqlplus / as sysdba create 4 connections?

    Hi all,
    I have a 4 node rac set-up running 11.2.0.2.
    If I log on to one of the 4 servers and connect to the database using sqlplus "/ as sysdba" it connects to the local database but also
    creates another 4 connections (one on each instance) so I end up with 5 connections. I wanted to know
    a) why it does this,
    b) how it does this
    c) can I stop it doing this (if I just so wanted to?)
    Many thanks

    Hi Billy,
    your response made me dig a bit deeper, and I found out what it was!
    My query to return sessions was from gv$session, and I was using the gv$session.module column to show the connection.
    However, if I changed this from module to gv$session, it returned the oracle PZ99 process.
    Looking on Metalink, I see this process is used to return data from remote nodes and was introduced in 10g RAC.
    Looking at the columns together, you will see way I thought the way I did originally!
    Inst   SID    SERIAL# USERNAME  MODULE                      PROGRAM
        1    35      17861 SYS      sqlplus@db01 (TNS V1-V3)    sqlplus@db01 (TNS V1-V3)
        3   324      34635 SYS      sqlplus@db01 (TNS V1-V3)    oracle@db03 (PZ99)
        2   320      46165 SYS      sqlplus@db01 (TNS V1-V3)    oracle@db02 (PZ99)
        1   641      36247 SYS      sqlplus@db01 (TNS V1-V3)    oracle@db01 (PZ99)
        4   639      39893 SYS      sqlplus@db01 (TNS V1-V3)    oracle@db04 (PZ99)Thanks

  • Enable Archivelog Mode On 2 Node RAC DATABASE

    hi,
    We are having 2 Node Rac 10g Database Installed on Windows.
    Currently the Database is in Non Archivelog Mode.
    I want to convert it to Archivelog Mode.
    I come to know the steps to convert cluster database to Archivelog mode.
    i.e.
    set archive parameters like Disk Location and Archivelog File format.
    then Convert the database in Exclusive Mode
    ALTER SYSTEM SET cluster_database=FALSE SCOPE=spfile;
    then
    C:\> srvctl stop database -d <Global_DB_SID>
    then enable Archivelog Mode.
    SQL> STARTUP MOUNT;
    SQL> ARCHIVE LOG START;
    SQL> ALTER DATABASE ARCHIVELOG;
    SQL> ALTER DATABASE SET cluster_database=TRUE SCOPE=spfile;
    SQL> SHUTDOWN IMMEDIATE
    C:\> srvctl start database -d <Global_DB_SID>
    But I am confuse with Do i need to RUN this commands in both the nodes seperatly or only on any one node.
    Please Reply,

    comments embeddedf
    Node 1: OSERP1
    Log on to OSERP1 Server
    C:\> sqlplus sys/oracle@racdb2 as sysdba
    SQL> ALTER SYSTEM SET log_archive_format='arch_%t_%s.arc' SCOPE=spfile ; -- this needs to be database wide
    SQL > ALTER SYSTEM SET log_archive_dest_1='location=\\OSERP1\archive$\ERP1 ' SCOPE=spfile sid ='ERP1'; -- required quotes added
    -- not required
    SQL> ALTER SYSTEM SET cluster_database=FALSE SCOPE=spfile;
    not required to connect to other node
    -- not required
    SQL> ALTER SYSTEM SET log_archive_format='arch_%t_%s.arc' SCOPE=spfile sid =ERP2;
    SQL > ALTER SYSTEM SET log_archive_dest_1='location=\\OSERP2\archive$\ERP2 ' SCOPE=spfile sid ='ERP2'; -- quotes added
    -- not required, and database wide setting
    SQL> ALTER SYSTEM SET cluster_database=FALSE SCOPE=spfile;
    Then following commands will be run connecting any of the instance
    -- database has to be stopped first, if you stick to switching it to a non-cluster database
    C:\> set ORACLE_SID=<local_instance_id>
    C:\> sqlplus / as sysdba
    SQL> STARTUP MOUNT;
    -- wrong sequence of commands
    SQL> ARCHIVE LOG START;
    SQL> ALTER DATABASE ARCHIVELOG;
    -- not required (see previous steps)
    SQL> ALTER DATABASE SET cluster_database=TRUE SCOPE=spfile;
    SQL> SHUTDOWN IMMEDIATE;
    6. Start the cluster database.
    C:\> srvctl start database -d <Global_DB_SID>
    -- There is no such thing as a <Global_DB_SID>. There is a database name.
    Please note your tnsnames.ora, in a standard install, needs to have the following service names.
    ERP
    ERP1
    ERP2
    I'm not sure why you have the non-standard service_name racdb2.
    Somehow it looks like you both don't understand the RAC concept, and didn't understand my answer. I had to correct several things I already corrected in my previous response. I'm not sure why I'm not getting through.
    Sybrand Bakker
    Senior Oracle DBA

  • Unable to startup 12c RAC database, can't open spfile in ASM

    hello,
    I'm testing 12cRAC database on RHEL5 and need your help to troubleshoot and fix the following issue  -
    DBCA fails at the end of the configuration to create and startup new RAC database with the following errors
    ORA-01078: failure in processing system parameters
    ORA-01565: error in identifying file '+DATA/TDB1/spfileTDB1.ora'
    ORA-17503: ksfdopn:2 Failed to open file +DATA/TDB1/spfileTDB1.ora
    ORA-15056: additional error message
    ORA-17503: ksfdopn:2 Failed to open file +DATA/TDB1/spfiletdb1.ora
    ORA-01017: invalid username/password; logon denied
    I also tried executing script (which was created by DBCA) to create the new DB  manually and got the same results - it happens during first attempt to start it up using SPFILE after new DB was successfully created (it was started up using pfile)
    Clusterware with ASM install was successful, binaries were also installed without issues,
    cluster seems healthy, I see correct files within ASM using asmcmd etc ..
    got stuck here and need some directions ... very confused by ORA-01017 password error
    wonder if anyone had same or similar issues ?
    Thank you !

    Fixed.
    Thank you everyone for suggestions and recommendations -
    ASM is accessible using asmcmd and I can see all the DB files incuding spfile, they were created by DBCA, alert log showed same information I posted
    After extensive troubleshooting and testing the issue was idedntified and fixed - 'dba' group needs to be the primary group for 'oracle' user, not the secondary one. I suspected that something was not right with 'oracle' user access to asm based on that strange password error. There is more I need to check as the issue and fix with swapping groups seems strange. Secondary group is not enough ti have proper rights ??? my first reaction was - seriously ? wtf ?
    Anyway - I need to move one now ...
    Thank you again !

  • Data Guard configuration for RAC database disappeared from Grid control

    Primary Database Environment - Three node cluster
    RAC Database 10.2.0.1.0
    Linux Red Hat 4.0 2.6.9-22 64bit
    ASM 10.2.0.1.0
    Management Agent 10.2.0.2.0
    Standby Database Environment - one Node database
    Oracle Enterprise Edition 10.2.0.1.0 Single standby
    Linux Red Hat 4.0 2.6.9-22 64bit
    ASM 10.2.0.1.0
    Management Agent 10.2.0.2.0
    Grid Control 10.2.0.1.0 - Node separate from standby and cluster environments
    Oracle 10.1.0.1.0
    Grid Control 10.2.0.1.0
    Red Hat 4.0 2.6.9-22 32bit
    After adding a logical standby database through Grid Control for a RAC database, I noticed sometime later the Data Guard configuration disappeared from Grid Control. Not sure why but it is gone. I did notice that something went wrong with the standby creation but i did not get much feedback from Grid Control. The last thing I did was to view the configuration, see output below.
    Initializing
    Connected to instance qdcls0427:ELCDV3
    Starting alert log monitor...
    Updating Data Guard link on database homepage...
    Data Protection Settings:
    Protection mode : Maximum Performance
    Log Transport Mode settings:
    ELCDV.qdx.com: ARCH
    ELXDV: ARCH
    Checking standby redo log files.....OK
    Checking Data Guard status
    ELCDV.qdx.com : ORA-16809: multiple warnings detected for the database
    ELXDV : Creation status unknown
    Checking Inconsistent Properties
    Checking agent status
    ELCDV.qdx.com
    qdcls0387.qdx.com ... OK
    qdcls0388.qdx.com ... OK
    qdcls0427.qdx.com ... OK
    ELXDV ... WARNING: No credentials available for target ELXDV
    Attempting agent ping ... OK
    Switching log file 672.Done
    WARNING: Skipping check for applied log on ELXDV : disabled
    Processing completed.
    Here are the steps followed to add the standby database in Grid Control
    Maintenance tab
    Setup and Manage Data Guard
    Logged in as sys
    Add standby database
    Create a new logical standby database
    Perform a live backup of the primary database
    Specify backup directory for staging area
    Specify standby database name and Oracle home location
    Specify file location staging area on standby node
    At the end am presented with a review of the selected options and then the standby database is created
    Has any body come across a similar issue?
    Thanks,

    Any resolution on this?
    I just created a Logical Standby database and I'm getting the same warning (WARNING: No credentials available for target ...) when I do a 'Verify Configuration' from the Data Guard page.
    Everything else seems to be working fine. Logs are being applied, etc.
    I can't figure out what credentials its looking for.

  • "Alter system set command" in a RAC database!!

    Hi, all.
    The database is (10.2.0.2.0) 2- node RAC database on 32-bit windows 2003
    EE SP1.
    I issued the following command on Node 1 database.
    --> Alter system set db_block_buffers= xxx sid='rac1';
    I was able to see "PE enqueue" in top 5 wait event section from an AWR report.
    In addition, I was able to find "PZ99","PZ98" process dump file in BDUMP.
    Soon later, I could find CKPT and DBWR hung.
    Is there anyone who experienced this issue?
    Thanks and Regards.
    Message was edited by:
    user507290

    10.2.0.2 has some bug which is fixed 10.2.0.3
    You check sequence cache. If it has less value, increase it to 10000.
    select CACHE_SIZE from dba_sequences where SEQUENCE_OWNER='SYS' and SEQUENCE_NAME='AUDSES$';
    SQL> alter sequence sys.audses$ cache 10000;
    Ashok

  • Not able to connect RAC database from client

    Hi there
    Recently I have configured RAC in test environment. version 11.2.0.1. OS Redhat 5.9. Everything seems to be fine except not able to connect rac database from client.  Error is as under :
    C:\Documents and Settings\pbl>sqlplus test1/test1@myrac
    SQL*Plus: Release 10.2.0.1.0 - Production on Mon Nov 17 14:29:06 2014
    Copyright (c) 1982, 2005, Oracle.  All rights reserved.
    ERROR:
    ORA-12545: Connect failed because target host or object does not exist
    Enter user-name:
    myrac =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST = rac-scan)(PORT = 1521))
        (CONNECT_DATA =
          (SERVICE_NAME = racdb.testdb.com.bd)
    Please give me your valuable suggestion to  overcome the issue.
    Regards
    Jewel

    user13134974 wrote:
    ORA-12545: Connect failed because target host or object does not exist
    This error means that the hostname or IP address used in the TNS connection string, failed to resolve or connect.
    Your client is making two connections. The first connection is to the SCAN listener. It matches a db instance for your connection request based on service requested, available registered service handlers, load balancing, and so on. It then send a redirect to your client informing it of the handler for that service.
    Your client then does a second connection to this service (a local RAC listener that will provide you with a connection to the local RAC instance). This is what seems to be failing in your case.
    The SCAN listener's redirect uses the hostname of the server that the local listener is running on. Your client needs to resolve that hostname (of a RAC node) to an IP address. This likely fails.
    You can add the RAC node hostnames to your client platforms hosts file. The appropriate action however would be to ensure that DNS is used for name resolution instead.

Maybe you are looking for

  • BADI/User Exit for WBS element creation (CRM to R/3)

    In CRM 4.0 once a Campaign or Trade Promotion is created, a WBS is also automatically in R/3 (tcode CJ20N) I have a requirement to fill out the 'user fields' at the WBS element level when the campaign/TPM status is set to Release. I also need to fill

  • What is the effect of change material price in previous period?

    i have changed the material price in 31/12/2010 and we are in period 01/2011 but the moving price doesn't changed in period 01/2011 its still the old price. i want to know why the system didn't change the price for period 01/2011 and  i want to chang

  • Laser Jet Printer/Color Text Prints Grey

    Hi everyone, I have a HP LaserJet 2430, black & white printer hooked up to my iMac. I'm running Snow Leopard 10.6.6. When I want to print, for example, an email where a color was used for the font, the colored font prints in grey. When I was able to

  • Regarding Pen Tool

    how do i duplicate certain parts of a path? cuz i'm tryin to join curves together and they are not smooth is if i try to trace it again [IMG]http://i40.photobucket.com/albums/e227/fusioniz/Adjoining.jpg[/IMG]

  • Inbound IDOC User Exit ZXVEDU04 change IDoc Data

    Hi all, We have to develop an user exit for changing the Plant, Shipping Point and Storage location We have identified the exit ZXVEDU04 . Is there some other exit for this ?? But which internal table we are supposed to change this to change the data