Prime 2.0 cannot save advanced filter

Hello,
We recently upgraded to PI 2.0 and we now cannot save our advanced filter slections. If you go to operate - clients and users - show advanced filter, create a filter and save it. I will filter the items but not save the filter in the pull down section like it used to in PI 1.3.
Can anyone else confirm that this is happening to them?
Dan.

Hi Cedar,
AFAIK , there is no way to import the OID template in the discovery settings. If it is really a critical concern for you then you can discuss this will your accounts team to raise the Product Enhancement request for this feature.
2.
what you are doing right now by excluding the system OID of the devices like printer etc is the best way to handle this suituation though it is a tedious task
Thanks-
Afroz
[Do rate the useful post]
****Ratings Encourages Contributors ****

Similar Messages

Calendar on iOS 7.1: Cannot Save Event - That event does not belong to that event store.

Hi All,
I have an iPhone 5 running iOS 7.1.
Yesterday, while updating a birthday in the iPhone iOS calendar app (default calendar = GMail), I noticed that the new 'List View' in the iOS 7.1 calendar (and only that view) showed an event called 'New Event' - which has a start date of 2014 and an end date of 2001. If I go into that event, it will show me no title and no location - only, as mentioned, funny start and end times. The 'Delete Event' button is completely missing. This 'New Event' does not come up in any other view.
Trying to input a ficticious title with a valid start and end time into that event slot leads to a message from the calendar app saying: "Cannot Save Event - That event does not belong to that event store." I have deleted all calendars and re-add them again via settings, with / without soft and hard reset and tried every possible combination. Yet, the event will not disappear.
The funny thing is that this 'New Event' will still showed up, even when my GMail, work and iCloud calendars were disabled. I have, however, subscribed to a GMail calendar for Australian holidays, and there is a built-in 'Birthday' calendar that pulls the dates from the contacts (I do not use that contact field, though).
Does anyone have a similar issue? Any suggestions how to fix it?
Thanks in advance!
Edit: This 'New Event' does not seem to sync to any calendar other than on the iPhone - not to Gmail, not to work, not to iCloud.

Had same problem. Although the phone looks off it actually isnt. If you actually turn it off and then on again this problem will disappear. I think its a memory overload issue that is solved by clearing the memory by turning it off.
Worked for me

Cannot save a bookmark to NEW folder - FF wants me to rename EXISTING parent folder

I cannot save a bookmark to a new folder. This is the path I am taking from the main menu:
Bookmarks | Bookmark This Page
Click the drop-down arrow to the right of Folder
Select Choose
Scroll to the parent folder in which I would like a new subfolder
Click New Folder
Then, instead of creating a new folder as it always did in the past, it highlights the parent folder for editing. If I type in a new folder name, the parent folder is changed to that new name. A new subfolder is created with the name New Folder.
Things I have already tried that did *not* resolve the problem:
- Deleting and then restoring bookmarks from a saved bookmark backup file.
- Running the Add-On "Places Maintenance"
- Rebuild "Places" database
I have not yet reset Firefox or created a new profile but can try that if you gurus think that would help.
I am using FF 32.0.2 on Win XP SP3.
I have hundreds and hundreds of bookmarks, but from what I have read, there is no max size limit.
Thank you in advance!
Carol

Cor-el, thank you very for your reply.
I started Firefox in Safe Mode. The problem still occurs in Safe Mode. My understand is if the problem persists in Safe Mode, it is *not* being caused by an extension, theme or hardware acceleration. Other possible causes could be plugins or changes made to Firefox preference settings, which are not disabled in Safe Mode.
As you suggested, I did check Add-ons > Appearance. (I don't think I have ever had any Appearance other than the default theme.) It was and still is set at Default 32.0.2 By Mozilla. Since the bookmarks problem persists in Safe Mode, I think we can rule out this as the cause anyway.
All of my Plug-Ins are up-to-date except iTunes Application Detector 1.0.1.1. Status is "unknown". I have all Plug-Ins set to "Ask to Activate" or "Never Activate". None of them are set to "Always Activate".
My cache, cookies and history have been cleared. I have rebooted my computer.
Per your instructions, I did *not* reset Firefox. Should I reset Firefox or reinstall Firefox?
The bookmarks problem still occurs.
Thank you so much!
Carol

Error message: You cannot save a completed copy of this form to your computer.

Hello,
I created a PDF form in Acrobat Pro X and i am trying to distribute it by placing it on our shared drive so employees can take it from there and save it to their own computer.
I tested the form with some employees that have Reader. Some can open it, save it, fill it in and submit it and others get this message when opening it:
You cannot save a completed copy of this form to your computer. If you would like a copy for your records please fill it in and print it.
I read some discussions that said to convert it to a binder, that didnt work either. i tried going to the advanced tab and extending the features to reader...nothing works.
Please help.
Thank you!

Thank you for your help George. I placed a ticket with our IT department to have them check the system time on her machine. I'll let you know if it worked.
Ioana

Photoshop CS4 "Cannot save due to an end-of-file error" Help

This problem occurs daily, probably 15-20 times per project. I take on normally 3-4 projects per day, so you can see how annoying this is. Basically when I'm saving, I get a dialogue box that says "Cannot save your file due to an end-of-file error" or something to that extent. I would love to resolve this, this problem is persistent and it's driving me out of my mind I'm saving to a network, if that has any correlation. Thanks in advance
     Chris

This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
     Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work.   It should.
    Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

Cannot save as PDF - "Could not save a copy as (filename) because the file is already in use..."

I have a number of PSD files I've created and I'm trying to save them as PDFs.
I can Save for Web and Devices, I can save as a .gif, .eps., and every other format I've tested, but I cannot save as a PDF. I get the error:
"Could not save a copy as (filename) because the file is already in use or was left open by another application."
I'm running Adobe Master Collection CS5 with Photoshop CS 5.5 (12.0.4 x64) on a Windows 7 64-bit machine.
I have a 928 GB HD with 697 GB free.
I have rebooted and tried saving the files immediately after I reboot. I have killed my virus scanner. I have killed a number of other possible culprits including Acrotray.exe and CS5ServiceManager.ext
I have run Process Explorer as recommended by Microsoft and found no applications using the file. I've also tried saving the file to my external hard drive and/or renaming the file with only rare luck.
Nothing seems to fix it.
The boards seem to suggest Adobe isn't taking responsibility for this and pointing it back to the OS or other software. I'm willing to believe them if someone can show me how/where to kill whatever process it is - but at this point, all my indicators point back to Photoshop.

Here is a clip from a past post where user could not drag and drop files to hard drive.
To my great relief I have now sorted this issue and offer the following as the Correct Answer. My sincere and grateful thanks go to Curt and Yammer, above, who have helped me so much in sorting this Windows 7 issue which is clearly very relevant to Bridge users also. Any slowness to grasp what they have been saying is down to me!
The key to solving this issue lies is understanding that in terms of Windows 7 Security, every internal or external hard drive, plus folders, sub-folders and files thereon has an OWNER. Also each OWNER has a certain level of PERMISSION to do things such as moving files to a different folder, deleting or re-naming them etc. If you try to do things that you don't currently have Permission to do, that is when you get an ‘Access Denied’ error message. Also your system has an Admistrator or Administrators and at the outset you need to ensure through the Control Panel that you are listed as one of them. .
If, like me, you didn't realise these things, (and why would you if Microsoft or your computer or hard drive suppliers couldn't be bothered to really make sure you knew about them), then trying to fathom the ‘Access Denied’ problem becomes a stressful and frustrating nightmare as I can testify having spent a week at it!
The steps that I took to resolve the issue and which I believe now constitute the 'Correct Answer' are as follows:
First make sure that you have Administrator rights on your system via the Control Panel
Next ‘right click’ on the Drive whose files you want to gain full access to, for example the drive that your pictures are stored on, and click on 'Properties'.
Under the Security tab you will see a list of Groups and Users on this drive and the Permissions that they have to do things.
Before doing anything to edit these Permissions, first click on the Advanced button. This opens another window with a tab showing the Owner of this drive.
Click on the Owner tab and if you are not already listed as the owner, make yourself the owner by selecting your name from the list. I believe it should appear there if you are an admistrator or user. (In my case at this stage the owner was initially shown as an obscure string of numbers and letters which I believe identified the drive when it was connected to the lap top I was using before I upgraded my machine)
Now be sure to check the box that says "Replace Owner on Subcontainers and Objects" and the click Apply. On completion of this step, the drive in question and all the folders, subfolders and files thereon should now be 'owned' by you. You could check this out by right clicking on a particular folder then clicking Properties > Security > Advanced > Owner. Your name should appear. So far so simples!
Now go back to the Security Tab for your drive (Step 2 / 3 above) and look at the Permissions you currently have. Your aim now is to allow yourself 'Full Control.' If you don’t currently have this level of permission click Edit, select your name on the list, check ‘Full Control’ and 'Apply' the change.
I think I'm right in saying that at this point whilst still working in the Drive directory you are now given the option of ticking boxes which allow you to, in effect, cascade the permission you have just granted yourself to all the files and folders on that drive. Tick the box to allow this and Windows should then take care of the rest.If I'm not quite correct here then in my particular case, for example, all my images were stored on my external drive. The top level, or 'parent' folder in which all my pictures could be found was the 'My Pictures' folder and I had created a number of folders and subfolders ('child ' folders) within that folder. The permissions I gave to the Parent folder – My Pictures – were cascaded down through the Child folders.
On completion of the above step I tested the result in Windows Explorer by dragging a few files back and forth between folders and it now worked perfectly - I was now able to move / delete / rename etc all files without now getting the dreaded access denied message. What a sense of relief! This meant that I could now open Bridge normally rather than having to right click it and 'Run As Admistrator' - albeit that is a very useful thing to do until you get the problem sorted as described.

Sos cannot save work in adobe reader x

when us
ers complete a form design with livecycle they cannot save it in adobe reader x

Thanks to some genius from adobe supp
ort this is the solution.
open the form in Acrobat and unsser the Advanced menu there is an option called "Extend Features in Adobe Reader". Run through this wizard then save your form....distribute that one and it will allow a local save in Reader.

Cannot save form although I've enabled the rights using Acro 8 Pro

I created a form in Acrobat 8 Pro (using the 30 day trial, trying to see if I can do it first as suggested I can before I buy). I prepared the form in the design mode, I enabled it with save (and other) capabilities for Reader (under the advanced menu), but when I test it by opening it in Reader 6.0 (latest version I have), I am not able to save it.
Do I need to have a later version of Reader? My customers likely won't.
In reader, I type into it and get the pop up telling me I cannot save anything typed into the form, etc. etc. I try to click the SUBMIT and PRINT buttons I enabled while in Acro 8 Pro, nothing works.
Have I missed a step ... or 5????
Would like this capability, cannot for the life of me figure out how to get it to work! I would buy the software if this was possible, and can make good use of the 500 and under document rule in the EULA.

I created the form using Live Cycle Designer b/c that was how Adobe prompted me to create INTERACTIVE forms that would be able to be assigned privilges. From your comments (Steve Foxall), it seems I do have the option but didn't take it. I will look into that also.
Aandi - I set up the submit and print through the Designer wizard-system and provided an email address (which works when I open the document using Acro 8 PROFESSIONAL, but not READER).
I have tested it in Reader 7 and 8, it works in both. But not 6, it seems. Same form, no changes. Hmmm.

Cannot save form error after form has been created

I've created a form and fucntions well.
It has been saved as a interactive pdf.
When people with just the acrobat reader open the file and click anywhere on the form a window pops up stating that
" you cannot save form..." then the OK button appears
You are able to enter data into the fields and print, but can only save the form as a blank copy.
Any help would be much appreciated.

You need to reader enable the form in Adobe Acrobat. Click on Advanced >
Enable Usage Rights in Adobe Reader and Click Save Now. You can then save a
reader enabled version of the form and users will be able to save their data
in the form.

Cannot save a completed copy of adobe forms

Hi experts,
i was developing a simple Adobe form with a drop down list. When saving that form on local system ad then opening it , I tried changing the valve in drop down list it gives me a pop-up as
"You cannot save the completed copy of this form on your computer."
is there any setting to be donw to the form.
thanks in advance,
Govind.

I guess you have already found the problem: you cannot save the file if your reader rights are down == your form has not been generated as interactive and no licence has been attached. Otto

Cannot save formsweb.cfg through OEM

Hi All,
I am using Enterprise Manager with Oracle Application Server (Forms and Reports services), and cannot save changes to the formsweb.cfg file through OEM.
I can make changes to the file formsweb.cfg manually (with notepad), and the server itself sees these changes, but Enterprise Manager still shows the original settings.
In our application always we need to do change the of .JAR file simenteneously and it will be deployed in Particular user instance.
I initially thought this was a cache problem, and re-booted the host. After the rebooting also i cannot see the manual changes in OEM , but it still refuses to make changes itself.
Does anybody have any ideas??
Thanks in Advance!
Santosh

This is the forum for the SQL Developer tool. You should ask your question in an OEM or Forms forum

Cannot save free/busy information - Cached mode

So I have a calendar Admin, that has the ability to send meetings on behalf of new hires. She was is cached mode and sent out a few invites. Everyone she sent the invites to received the meetings, accepted the meetings and have the meetings on
their calendar. My Calendar Admin see's the meetings on the new hire's calendar, but no one else can see these meetings on the new hires calendar. My Calendar Admin mentioned seeing the infamous pop-up "cannot save free/busy information":
I disabled cache mode on my Calendar Admin's Outlook 2013, once I disabled cached mode and close/re-opened Outlook, all the the invites she had sent for the users were gone, no longer listed on the "Organizers" calendar... so somehow the invites
were only saved locally to her cached calendar. This smells like a pretty bad bug for users with access to shared calendars and seems like they MUST be in NON-CACHED mode when sending any invites on behalf of someone else. So now, all the meetings
are on all the calendars of the "invitees" but not on the new hire (organizers) calendar. This is seems to be a reproduceable bug that I'm hoping isn't working "as designed"
Are there any known bugs with this process? Is there a way around this other than disabling cached mode? Where do these meetings actually save when in Cached mode on a shared calendar?
Thanks in advanced

Hi,
Please check this following setting on her account first.
In Outlook, click File, click Account Settings, and then click Account Settings (again).
Select the Microsoft Exchange account, and then click Change.
Click More Settings.
Click the Advanced tab.
Select the Download Shared Folders option.
Click OK, click Next, click Finish, and then click Close in the Account Settings window.
If this doesn’t work, please try to repair or re-create outlook profile to check this issue.
Exit Outlook.
In Control Panel, double-click Mail.
Click Show Profiles.
Select a profile.
Click Remove.
Click Add to create a new Profile.
Best Regards.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Lynn-Li
TechNet Community Support

Why does Numbers suddenly not autosave. I cannot save my document as?

I have two questions all about Numbers.
I have been working a large spread sheet. I get the message that it cannot autosave. i cannot save at all. not even save as. Is this a bug in numbers or have I done something wrong?
I furthermore have lost a very important spreadsheet from an external drive after I forced restart. After a couple of days the document reapeared but i cannot open it. Very strange
Please help. I am increasingly loosing confidence in Numbers.
Thanks in advance!

Why does Apple not respond to these requests?

Cannot Save NULL value to database

I cannot save a null value through the data tab in the multi-row updates pane. It always gives me an error such as "Invalid number". It works fine through normal SQL update statement. Is there a preference somewhere to turn this on?
thanks in advance
Paul P

Hi Paul,
Just use the backspace key to obliterate any existing value -- that makes it null. Afterwards, if you refresh or close/reopen the object, the data tab will display any null as the value set in Tools | Preferences | Database | Advanced | Display Null Value As .
Regards,
Gary
SQL Developer Team

Cannot save file.

I cannot save a httpd.conf file using the MS Notepad [ text editor]. I am trying to coinnect PHP with the Apache Web Server. Thanx in advance to anyone who helps me.

Occasionally. Usually for me it's when the same document is also open in Preview (which usually happened by accident if I double-click to open, and for some reason Preview thought it should open that file) and sometimes when the image is imported into an open Quark document. Closing the offending file usually fixes it. But I've also had it happen randomly when I couldn't figure out why it thought the file was open anywhere.

Prime 2.0 cannot save advanced filter

Similar Messages

Maybe you are looking for