Pring VALUE field as blank, if it's worth is 0.00

Hello,
I have value field (DATA: V_Net_Value TYPE KONV-NETWR) in my ALV grid display report. When i dont have any value, am getting 0.00 as output in my ALV report, but, user would like to see it as blank/nothing. Because of some reasons, i can not use a CHARACTER type field for outputting in order to get blank in ALV. Pls. let me know is there any other option/flag to get my requirement.
Thank you

There was a similar question which was discussed long back. You can check the idea suggested by Sourav Bhaduri here Replace amount in OOPS ALV
It sounds promising. I had not got a chance to try it till now. Other than this i donot see any other way( without converting it to type C ).
Just try like if input = '0.00' then output = space.

Similar Messages

  • Import: CVD Base Value field is blank in MIGO

    All SAP gurus,
    We are running a Import's scenario.
    For this we have created Z condition types for CVD and BCD,  maintained all the condition types in pricing procedure (Customs Duty and CVD etc)
    Excise defauls are also maintained.
    problem we are facing is:
    Base value field is blank in MIGO and CVD amounts are not coming automatially from PO.
    When we maintained the values for CVD manually, accounting entry is correct.
    Which settings might be missing.
    Regards,

    HI,
    You need to enter the custom invoice number while doing GR wrt to Import PO, it will ask you the commercial invoice number which is your custom clearing agent invoice number once you put the invoice number and the year of the invoice, the base value will be come from there. Also check quantity with which custom commercial invoice was posted in the system should be equal to GR qty.
    BR
    Edited by: Sujoy on Feb 20, 2010 11:20 AM

  • ODS Key Fields allows blank values in Transformation

    Dear Experts,
    I have two layers:
    1. Datawarehouse layer (purpose is to represent exactly data at the backend)
    2. Consolidation Layer
    Scenario 1:
    In Datawarehouse layer, the fiscal variant is a key field in ODS and I have two other key fields i.e. combine to form a composite key.
    When I load the data from PSA to this ODS, I have a record which contains blank value for the fiscal variant. It successfully loads into the Datawarehouse ODS.
    Sceanrio 2:
    In the consolidation layer, i have 4 key fields out of which fiscal variant is one of them. Now when I load the data from the datawarehouse ods to consolidated ods, it throws an error saying:
    Diagnosis
         An exception fiscvarnt_missing was raised while executin
         module RST_TOBJ_TO_DERIVED_TOBJ .
    System Response
         Processing the corresponding record has been terminated.
    The transformation mapping for the fiscal varaint in both sceanarios is 1:1 mapping with the rule type 'Time Characteristic'.
    My questions is:
    1. Why different behaviour during scenario 1 and sceanario 2
    2. Solution to the above issue
    Thanks
    Jain

    Thanks J.S.
    Yes the format selected in the field for the datasource is 'Internal'.
    When loading the data from R3>PSA>ODSX(Datawarehouse Layer), I have no problems even when the field is blank.
    When loading from ODSX-->ODSY(Consolidated Layer) the empty (blank) field for that records throws error.
    Any ideas?
    Jain

  • SUMIF to sum only if test-value field is non-blank?

    Hey Numbers experts, I'm looking for a way to conditionally sum the values in a column. In other words, if the corresponding field in my "test values" column is blank, I do not want to include the value from the same row in my "sum values" column. Is there a way to do this?
    It seems that SUMIF is the perfect function, I just can't figure out a way to make it look for only non-blank fields. the test values, except for the blank fields, are all going to be unique values, so there is really nothing else to use as a test other than the presence or absence of data. Help?
    Thanks in advance!

    C2=SUMIF(A, "<>"&"", B)
    this is shorthand for... select cell C2, then type (or copy and paste from here) the formula:
    =SUMIF(A, "<>"&"", B)
    the expression:
    "<>"&"" 
    reads:
    "is not equal to the empty string"

  • IDOC segment fields prefixing blank space with values

    Hi Experts,
    I am sending data through custom IDOC from SAP to XML which generates successfully but getting 2 problems in the data.
    its having 3 level idoc segments:
    SEGMENT1 with 1 field (field_name(20))
    SEGMENT2 with 3 fields, (code_g(20), field_name(20), value(20))
    SEGMENT3 with 4 fields, (code(20), field_name(20), Language(2) & text(20))
    When i check the idoc in WE02,
    1. i found that segment2-value field is prefixing some space along with the values.
        Eg: if the output is "0111" whihc is plant, in the output (WE02) it is giving "       0111"
    2. Segment3-language is no where in the output and text which should come as "011" is coming like "       EN011" means it is concatinating language field value and displaying it with the text field value with prefixing space.
    This is happening in PRD not in QA & DEV. I also checked the transport req and everything, Its same everywhere.
    Can anyone please help me on this.
    Regards,
    Nik

    Hi,
    This issue happnes when u are moving the data to iDOC segement with offset.
    to aviod this improper move instead of using offset statement use below mentioned code.
    decalare a structure as
    Data SEG1 type SEGMENT1 ,
            SEG2 type SEGMENT2,
           SEG3 type SEGMENT3.
    then while moving
    SEG2-code_g = 'XXXX'
    SEG2-field_name = 'YYYY'
    SEG3-value = 'ZZZZ'
    here u are moving the segment values to idoc data (SDATA) and then append it.
    move seg3 to idoc-sdata.
    then append it to idoc.
    hope this helps

  • Assignment Field is Blank only on Direct AR/AP Posting Scenario

    HI Experts,
    I have an issue regarding Manual Direct Posting on AP/AR FI Transactions. Our Users currently cannot post continuously the FI Documents because the Assignment Field is left Blank and is not automatically populated. We already check some scenarios like the configuration of the Sort Field, the Assignment of the Sort Field to G/L, and they are correctly assigned and configured. We also check that there are no Substitution Exits in tcode GGB4 or GGB1.
    However, we tried these G/L accounts on other Document Types and they are continously posted with the automatic determination of the assignment field.
    Anyone knows the configuration why the Assignment Field is not automatically filled-up even when sorting field is already assigned to G/L and with the scenario that is not working through direct posting with Document Types "DR" - Customer Invocie and "KR" - Vendor Invoice?
    Thank you for all your answers

    Hi jatgutz,
    Thanks for the Reply. Yes I have checked and it is likely the case for the Entry of AP/AR in the Accounting Document but during the Document Posting, when we do automatic tax calculation, the G/L Tax Account entry is also not assigned with the "Assignment" value even if the G/L Tax Account is maintained with the Sort Key. That's why an error message appears during simulation saying "Error in Line 003(where Tax Line Entry) - Please check" in the logs. The Document now if saved, becomes Parked.
    Last time, the Document normally continues to post even the AR/AP Item's "Assignment field" is blank because the tax entry's "Assignment field" is automatically filled. But now it's not working, both the AR/AP Entry and the Tax Entry's "Assignment field" are blank.
    So how do we check if this tax entry field's behavior during automated tax calculation? Is there a configuration for this that deactivated the Automatic "Assignment field" value for Tax Entries during Direct FI Posting?
    Thanks a lot!
    BTW I am a Filipino.Cheers!

  • Defaulting fixed length file fields to 'blank'

    Hi,
    I am currently working on an outbound interface which results in the construction of a fixed length record flat file. At the moment I am having to deal with each field in person to ensure that either a value,or a blank is mapped to the target field as each field is mandatory. Is there an easier way to do this such as using the 'default' setting in the data type definition with some special character to represent a blank so that I dont have to worry about missing values in my message.
    Regards,
    Pete

    Hi
    I have the same problem, and didn't find any way to default the fields.
    It helps to use the function "mapWithDefault", but you still have to deal with each field.
    Br,
    Elling

  • Text Field is Blank in Transaction F-28

    Hi Experts,
    There is a requirement to add to the current layout the text field in F-28 transaction code. However, when I add them as an administrator, The text field is blank. We already maintained the text field in both Accounting Document Line item and in the Invoice but still the text field is blank. Where can we find the value of text field in the documents shown in F-28. Are there any configuration to do this?

    Ok. Currently they had this problem on tagging which Invoices to be considered for payment clearance in tcode F-28. Their current process is every Ship-To-Party, they also equate it as one project code with the location of the project information,etc. They are using this ever since the first implementation. So in their process, they go to FBL5N to check those invoices created before going to F-28. In FBL5N, I incorporated the text field there (filled by user-exit display) which also came from the accounting document. But it's not correct since they are using the ship-to-party value in F-28.
    So we tested by manual input directly the Ship-To-Party Code to Acc Doc Line Item Text Field. It went to FBL5N, as showing the value there but in F-28 it is not showing.
    Do you have any solution for this? Since during payment in F-28, I think these entries are already Acc Doc Entries and Ship-To-Party is not reflected here but Payer only (coming from the invoice).

  • Port field is blank in Control record

    Hi Experts,
    I am sending the idoc from R3 to XI to R3, the idoc successfully came to R3 to XI and XI to R3, but in reciever r3 system when i check idoc control reocrd, the port field is blank.
    Can you please help me why it is blank.
    Kind Regards,
    Praveen.

    Hi,
       If you have chosen the "Apply control records from Payload" check box in Receiver IDOC adapter configuration, then you have to look at what value did you map the RCVPRT field in your message mapping.
    If "Apply Control recrds from payload" is not checked, then you have to re-check if your port configuration is properly done in IDX1 transaction in your XI box.
    Regards,
    Ravi

  • "%0.00" hidden when field is blank.

    Thanks in advance for your help. I have created a form which contains percentage values. When blank, these fields show "%0.00". The problem is that many times our customers print out the form and fill it in by hand, so the "%0.00" is a nuisance. Does anyone have any advice on how to make that field hidden unless a value is entered. (This is similar to the "$" issue I had a while back.) Thanks again.

    Did you clear the form or force a calculation?
    Validation scripts only run when the form field is updated.
    Are there any errors in the JavaScript console?
    This script works the same way as the currency formatting, it just uses a different internal format function.
    You need to set the field's format to "None" since the validation script is determining the format and not a format script or the format selection (which is a behind the scenes JavaScript). The Formatting of a field is done after the Key Stroke, Validation, and Calculation for the field. See Form Event Processing for the sequence of field event processing. So any formatting applied by the validation or calculation is overridden by the any formatting selection other than "None".

  • PR created through CRM service should have receipient field as blank

    Hello All,
    We are doing enh for receipient field blank when PR creates through CRM service but when the PR creates by CRM badi we are able to generate this receipient field as blank but it overwrites by STD  Bapi in R3
    Can anyone tell me how i can make this field blank by any R3 badi/user exit  or nay other wayout
    Regards
    Pratap

    >
    Paul Clarence wrote:
    > Hi all,
    >
    > Would be grateful for any advice as to what are the steps that should happen with this type of revenue recognition. I have read through the SAP Help documentation but this really describes just the customizing and not the process.
    >
    > THanks
    > Paul
    Hi, Paul!
    In CR700 materials there is the next explanation: "Service-based revenue recognition (value/quantity contracts with a target quantity) means that the revenue is realized based on an event. Events are releases that are reflected as service orders or service confirmations. Once again, the billing document is posted to an accruals account first and the revenues are transferred to the revenue accounts in a second step."
    Hope it helps
    wbr
    Vladimir

  • Transporting of Value field name/description translation in COPA

    Hi,
    I have a problem with Value field name/description translation in COPA. In English language all user defined value field names are defined properly with name and description.
    In my native language their names are blank and its hard to use COPA reports as we don't see the description of particular value fields.
    Is it possible to tranport the names of value fields from DEV system to PRD system? I have altready translated value fields on DEV but there is no option to create transport with the translations or changes in the names I made.
    If it is possible to transport it to PRD, do I have to refresh and regenerate Operating concern in PRD?
    I am not confident with refreshing Operating Concer on PRD client - as it might be generated with errors and stop all sales.
    What would you advice?
    Kind regards,
    Karol

    Hi Nakul,
    Kindly check if you have reset the value field in KE4W. If this does not help then please provide us more details about the document that you have posted.
    Regards,
    Abhisek

  • Assignment Field is blank in the Accounting Document of MIRO

    Hi Gurus
    I am working on ECC 6 version. I have observed in my system that for some of the vendor invoices posted using the MIRO transaction, assignment field is blank in the respective Accounting Document for the Vendor Line Item. But for GRIR Line Item Assignment field is filled with Purchase Order Number.
    My requirement is to display the Purchase Order Number in the Assignment Field (ZUONR) of the Vendor line item also and for that purpose I have assigned the Sort Key of Purchase Order in the Recon GL Account master under Control Data Tab, Sort Key Field as 010(Purchase Order No.). Also, the Vendor Master has the Sort Key as 010 (Purchase Order).
    I have applied the Note 676338 and checked and checked the structure RFPOSXEXT. It has the Assignment fields both ZUONR as well as U_ZUONR.
    Still after above changes, when I post the MIRO, the assignment field in the vendor line item of its accounting document is blank. Any clues how to fill the vendor line item's assignment filed with the purchase order number ?
    Thanks for your help.
    Regards
    Gemini

    Hi Gemini,
    Sort key does no magic, it populates value from the original field from the same line item only.
    Taking this as an example...First check that PO field is populated in the Vendor Line item then only sort key will be able to populate the field else it will be blank.
    I don't think system populated PO field in the vendor line item.
    If you want to meet your requirement and contact your ABAPer and write a Substitution User-exit to populate PO Number into assignment field.
    Regards,
    Chintan Joshi

  • How Do You Change A Numeric Field To Blank When Zero?

    I'm using Adobe Acrobat 6.0 Professional, version 6.0.6.
    Can anyone help me with the code to change a numeric field to blank, when "0.00"?

    "no success" does not provide much to go on.
    With your scripts, I get the concatenation of the sting values, so one has to force JavaScript to convert strings to numbers.
    Make sure your field names are exact including case.
    Make sure the calculation order is correct.
    The following scripts all work:
    var fa = 1 * this.getField("FeeN01").value;
    var fb = 1 * this.getField("FeeN02").value;
    var fc = 1 * this.getField("FeeN03").value;
    event.value = fa + fb + fc;
    if ((event.value == 0)) {
    event.value = ""
    // or
    var fa = this.getField("FeeN01").value / 1;
    var fb = this.getField("FeeN02").value / 1;
    var fc = this.getField("FeeN03").value / 1;
    event.value = fa + fb + fc;
    if ((event.value == 0)) {
    event.value = ""
    // or
    var fa = Number(this.getField("FeeN01").value);
    var fb = Number(this.getField("FeeN02").value);
    var fc = Number(this.getField("FeeN03").value);
    event.value = fa + fb + fc;
    if ((event.value == 0)) {
    event.value = ""
    The "sum of" also works with the "Custom validation script" of:
    if (event.value == 0) event.value = "";

  • How to set field to blank if the data is # or unassigned

    hi experts,
    how to set field to blank if the data is # or unassigned?
    thx

    Hi
    add the following macro to your workbook (template workbook):
    Sub SAPBexonrefresh(qstring As String, resultArea As Range)
        For Each c In resultArea
            If LCase(c.Value) = "not assigned" Then c.Value = ""
           Next
    End Sub

Maybe you are looking for