Print copies of layout

hello!
i have a layout that must be printed in 4 copies by laserjet printer.
I need that all the copies will be printed in one job, what is happening that the 4 copies are printed in 4 different jobs.
Is there a way to do it through the print program?
and in the open_form function in options ( structure itcpo ) the is a field TDNEWID - NEW SPOOL REQUEST what is it used for?
best regards
yifat

Hello Yifat,
Make sure while setting the ITCPO-TDIMMED, ITCPO-TDNEWID is set to space (ITCPO-TDNEWID = ' ').
Or do one thing mail me the code at my email address with form, I will try this at my end....
Thanks & Regards,
Ankur Jain
[email protected]

Similar Messages

COPA Report Layout with Object List (ALV)

Hi,
I have question about the COPA report layout with object list (ALV). Everytime I executed the report with ALV format, the amount for quantity column always shows with 3 decimal number, menwhile for amount column always follow by 2 decimal number.
Can anyone help me regarding this matter? I do not know how to turn off the decimal number to be 0 in this type of layout, although in the form itself I already put 0 decimal number.
Thanks.

Hi,
Better to raise this issue in CO Forum. You can expect some solution.
regards

Arabic Text Printing in PO Layout

Hi,
The requirement is only "Vendor Name" mainained in Arabic language in "Name3" field of the Vendor Master, should print in Arabic Text in PO Layout Printout. PO Printing is in English. This vendor name is appearing corrrectly in Vendor Master Name3 field as we uploaded it throguh Upload program in Uni Code text. After printer setting, PO Layout is printing correctly in English & now Vendor Name3 is also printing in Arabic Text (other vendor details are in English) but Araic Vendor Name is coming as seperate charaters instead of joined arabic word. Has anybody faced this problem? Your comments are welcome.
Regds
Chandan

Dear,
check: http://www.sdn.sap.com/irj/sdn/printing?rid=/library/uuid/8075b32f-d7c9-2b10-db84-97015a3a23f4&overridelayout=true
Regards,
Syed Hussain.

MN05: setting the number of printer copies for the whole range of vendors

Hi all,
by t.code MN05 I can set the number of copies of the MM documents printed the FIRST TIME. I can do it for doc.type or vendor.
I can't set the number of printer copies for the whole range of vendors. Should I do it for each one of them?
Thanks
Gandalf

Unfortunately,
setting for document type, it doesn't work for all range of vendors.
Setting for document type, in the field "PartF" I've put in "OA". Could it depend on it?
you do for document type and then it will cover all range of vendors.
If you want prints for a specific vendor then set condition recrod for that vendor only.
regards

Logic to get 2 print copies separately

Hi All,
We have a req on check printing to add logic to take care of 2 print copies (check and office copy)separately and save them in a PDF file in a location thru pop-up.
Pls. provide your valuable pointer.
Thanks,
Deepti.

Hi,
Refer to the following code. it will be helpful for u.
REPORT ZPRACSCRIPT.
TABLES: likp, lips,itcpo.
Data: struct type itcpo,
      pdftab type standard TABLE OF tline,
      datab TYPE standard TABLE OF itcoo.
DATA: BINFILe type I,
      filename type string,
      filepath type string,
      fullpath type string.
struct-tddest = 'LP-01'.
struct-tdnoprev = 'X'.
itcpo-tdgetotf = 'X'.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
   DEVICE                            = 'PRINTER'
   DIALOG                            = 'X'
   FORM                              = 'Z_PRAC'
   LANGUAGE                          = SY-LANGU
OPTIONS                           = itcpo
EXCEPTIONS
   CANCELED                          = 1
   DEVICE                            = 2
   FORM                              = 3
   OPTIONS                           = 4
   UNCLOSED                          = 5
   MAIL_OPTIONS                      = 6
   ARCHIVE_ERROR                     = 7
   INVALID_FAX_NUMBER                = 8
   MORE_PARAMS_NEEDED_IN_BATCH       = 9
   SPOOL_ERROR                       = 10
   CODEPAGE                          = 11
   OTHERS                            = 12
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CLOSE_FORM'
TABLES
OTFDATA                        = datab
EXCEPTIONS
   UNOPENED                       = 1
   BAD_PAGEFORMAT_FOR_PRINT       = 2
   SEND_ERROR                     = 3
   SPOOL_ERROR                    = 4
   CODEPAGE                       = 5
   OTHERS                         = 6
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CONVERT_OTF'
   EXPORTING
     FORMAT                      = 'PDF'
IMPORTING
     BIN_FILESIZE                = BINFILE
    TABLES
      otf                         = datab
      lines                       = pdftab
   EXCEPTIONS
     ERR_MAX_LINEWIDTH           = 1
     ERR_FORMAT                  = 2
     ERR_CONV_NOT_POSSIBLE       = 3
     ERR_BAD_OTF                 = 4
     OTHERS                      = 5
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
    CHANGING
      filename             = filename
      path                 = filepath
      fullpath             = fullpath
    EXCEPTIONS
      CNTL_ERROR           = 1
      ERROR_NO_GUI         = 2
      NOT_SUPPORTED_BY_GUI = 3
      others               = 4
IF sy-subrc <> 0.
   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
     BIN_FILESIZE                    = binfile
      filename                        = 'D:\MYFILE.PDF'
     FILETYPE                        = 'BIN'
    tables
      data_tab                        = pdftab
   EXCEPTIONS
     FILE_WRITE_ERROR                = 1
     NO_BATCH                        = 2
     GUI_REFUSE_FILETRANSFER         = 3
     INVALID_TYPE                    = 4
     NO_AUTHORITY                    = 5
     UNKNOWN_ERROR                   = 6
     HEADER_NOT_ALLOWED              = 7
     SEPARATOR_NOT_ALLOWED           = 8
     FILESIZE_NOT_ALLOWED            = 9
     HEADER_TOO_LONG                 = 10
     DP_ERROR_CREATE                 = 11
     DP_ERROR_SEND                   = 12
     DP_ERROR_WRITE                  = 13
     UNKNOWN_DP_ERROR                = 14
     ACCESS_DENIED                   = 15
     DP_OUT_OF_MEMORY                = 16
     DISK_FULL                       = 17
     DP_TIMEOUT                      = 18
     FILE_NOT_FOUND                  = 19
     DATAPROVIDER_EXCEPTION          = 20
     CONTROL_FLUSH_ERROR             = 21
     OTHERS                          = 22
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards
Rajesh Kumar
Edited by: Rajesh Kumar on May 4, 2009 8:43 AM

Print 2:1 layout from numbers into pdf zero bytes

Output desired
1 page landscape with page 1 and 2 side by side
Problem: zero byte output when layout changed
Hi before mavericks / last numbers update i used to be able to print a spreadsheet with 2 separate sheets on one landscape page, by choosing print-->print...>layout (2 pages per sheet), then save as PDF. Anytime I choose anything other than 1 page per sheet the resulting PDF file has zero bytes and doesn't work. The print preview in numbers looks correct as well as the print dialogue preview. Something is failing in the export. Any ideas?

Hi lotsokids,
Just to ensure we are all singing the same tune .
A Numbers document consists of one or more sheets (tabs).
Each sheet can have one or more tables plus other objects (shapes, charts, text boxes... ).
A page is a piece of paper in your printer.
Am I right in thinking you have two tables on one sheet?
And you want to line them up within the page margins so that they both print on one page? Screen shot from Print Preview:
Numbers 3 has lost the good old Print View and Layout View of Numbers 2. We are stuck with Print Preview with limited editing options. We can set page margins, orientation (landscape or portrait), page headers and footers, print This Sheet or All Sheets. You may have to drag the Print Setup Panel up to see all the options.
To help align objects within the page margins, click on Done to close Print Preview. Then Menu > Numbers > Preferences > Rulers (and tick all boxes).
Alignment Guides can be dragged from the rulers to show page margins.
See this User Tip on creating a Layout Guide in Numbers 3:
https://discussions.apple.com/docs/DOC-7101
Regards,
Ian.

To create a COPA Budget layout

Dear All,
Cany anyone give me some background To create a COPA Budget layout
Regards
Venkat

Hello
For information, there is different way to do that.
For my point of view Excel is better tha SAP to help controler. So I recommend to create an Excel file with the data.
After to load it into COPA use the standard way,
Transaction KEFA => base on a structure standard like CE0<ID COPA> or to create your own. In this step you define the structure of your input file
Transaction KEFB => define the mapping between your file (transacion KEFA) and the COPA structure, also you can adjust constant, fix value, mapping, ....
Transaction KEFC => upload the data.
you have to know if you load many time the budget SAP will determine the gaps between the old value and the new valeu. So you file has to be the new value and not the old value.
I hope to be clear if not contact me.
Best regards
Philippe

Help reqd on copies of layout(smartform)

Hi experts....
my requirement is....the records in the table of my smartform will be displayed more than once as per the user request from the selection screen....i'e,its like a copies of same set of records in different pages...where we give usually like in print pages option such as no. of copies1,2 3 etc....
but i want this,it should be done in smartform way....when the user gives 3 in the selection screen my form print should give 3 copies of same set of records as in the main window of the 1st page/layout...
if u have answer...pls post ur replies...will be rewarded imm based on the correct solution....
thanks
sankar

hi sankar,
based on selection of copies u can use DO..ENDDO...for that copies...
and inside that DO...ENDDO u can call ur smartform...
hope this may help u..
please reward in case usefulll...
regards,
prashant

Copies of layout

hi!
i need to define a layout with four copies which means that when printing the layout it will print 4 copies .
how do i do it?
best regards
yifat

Hi,
try with this
in the print program
data : itab_options like ITCPO.
itab-options-TDCOPIES = 4.
CALL FUNCTION 'OPEN_FORM'
EXPORTING
APPLICATION                       = 'TX'
ARCHIVE_INDEX                     =
ARCHIVE_PARAMS                    =
DEVICE                            = 'PRINTER'
DIALOG                            = 'X'
FORM                              = ' '
LANGUAGE                          = SY-LANGU
   OPTIONS                           = itab_options
IMPORTING
LANGUAGE                          =
NEW_ARCHIVE_PARAMS                =
RESULT                            =
cheers,
sasi

Huge delay in Printing Crystal Report Layout

Good Day Experts,
I am experiencing big delays when printing a document that makes use of a Crystal Report Layout Design.
For example,
The Sales Quote is set to automatically print when added by the user.
When clicking 'Add', SAP freezes up and only about 30 seconds later does the printer finally print the document.
During that time, the user cannot use SAP at all.
The layout does have a lot of fields and a few formulas here and there.
Logically, I am thinking that that is the reason for the delay, as SAP needs to calculate and populate those fields.
Is there any other way that I could speed up this process? Or if you know what might be causing this speed issue?
Your assistance will be appreciated,
Thanks
Regards
Dario

Hi Dario,
Pl Try the Below Threads and Ref SAP Notes Provided by NagaRajan.
http://scn.sap.com/message/13419121#13419121
http://scn.sap.com/thread/2024941
Regards,
Vamsi

Print Module templates layouts do not update on the fly

Print layouts do not update on the fly when attempting to choose between various Print Module>Template Browser> Lightroom or User templates. This occurs in all three Layout Styles. The very first layout chosen in Single Image/Contact Sheet, Picture Package, or Custom Package is the permanent 'default' and cannot be changed. The Preview will show as expected however any image stays stuck in the very first layout I chose after installing LR4 beta.
For example, I first chose Template Browser>Lightroom Templates>Maximum Size, and Layout Style>Single Image/Contact Sheet. Clicking through any other Templates (Lightroom or User defined) will alter the preview but not the layout display in the Print window. Same problem in either of the other Layout styles. I have been trying for days to rectify this, but it seems somehow more difficult than LR3. and not what I expect.
As a comparison, using the same steps in LR3 works perfectly as all print template/layouts can be changed on the fly as expected. I have no problems generating different layouts in LR3 and have been using LR print module since version 1 without this issue.
Is this a bug or are there any extra steps or workarounds I have not discovered? Any other testers seen this?

Update with more info. What am I doing wrong, if anything?
Print layouts do not update on the fly when attempting to choose between various Print Module>Template Browser> Lightroom or User templates. This is not a hang since the layouts do not change after the initial choice no matter how much time elapsed.
iMac OS 10.6.8. 8GB RAM.Processor Intel Core 2 Duo. NVIDIA GeForce 8800 GS.
The steps as follows:
1) Lightroom 3.6 & LR4Beta exist side by side.
2) LR4 Beta> Print Module;
3) From filmstrip choose image;
4) Template Browser> Lightroom4Beta Templates>Maximum Size;
5) Preview displays as expected;
6) Layout Styles>Single Image/Contact Sheets
7) Template Browser> Lightroom4Beta Templates>click through any other templates (Lightroom or User defined);
8) Image layout in main window does not update;
9) Previews update;
10) Layout Style>Picture Package;
11) Template Browser>Maximum size is then automatically shown, however the template in the main window is actually (1) 7x5, (2) 2.5x3.5;
12) Any further attempts to change the layouts regardless of Style Layout choices are not successful.
13) Close LR4Beta>re-open LR4Beta;
14) Repeat test;
15) Print Module layouts do not update on the fly as expected;
16) Close LR4Beta and all applications;
17) Reboot iMac.
18) Open LR4Beta only;
19) LR4Beta>Print Module>Template Browser >Lightroom Templates>Maximum Size;
20) Image displays in main layout window with Template and Preview display as expected;
21) Choose different image>Template Browser>Lightroom Templates>Maximum Size;
22) Click through templates, layouts DO NOT update in main window although previews do automatically update.
23) CONCLUSION - In Lightroom 4 Beta>Print Module>Template Browser, image layouts do not change after initial choice as expected.
I posted this on Photoshop.com as a problem.

If NO_DATA_FOUND then want to print message instead layout

The report has dynamic query, which is built on base of parameters passed by USER at run-time.
Suppose if no data is returned for that query, (1)how can I avoid printing regular titles and (2) print some other message saying data is not found.
Thanks,
Nirav

On your data model, create a report-level summary column that counts some column in your report. Then, on the layout model, create a boilerplate text containing the message that you want displayed when there are no records fetched. Then create a format trigger for the boilerplate that suppresses it when there are records, but displays it when there aren't. ex:
if :summary_column is null then
return true;
else
return false;
end if;

Printing Normal Portrait Layout in iCal

Am I mssing something?
How do you print my iCal weekly layout in the "Normal" portrait layout?
Would like to print on "normal" 8.5x11 paper and put in 3 ring binder.
There MUST be a easy way to do this?

Jack,
try this:
Choose File/Print (command-P).
In the print dialog, change View to "List". Change "Starts" to "On Date" and set to the first day of a month. Change "Ends" to "On Date" and set to the last day of a month.
Down at options, unset all checkboxes for data you don't want to print. Choose "Continue".
Unfortunately you cannot save these settings, so you have to repeat the steps every time you want to print your calendar this way.

Slow printing copies to HP Color Laserjet 400 series

This issue first appeared on 10.8, and still there... Not sure if it is a feature or bug
HP Color Laserjet M451 with ethernet connect and 386 MB ram. Mac 10.9.3 with latest print driver from HP.
Let's say my document has 5 pages, text and graphics, it will print fine speed wise. Say it takes about 30 sec to spool, process and print the one page. THe rest of the document print at good speed.
If I decided to print 8 copies of this document, and select 8 copies in the print setting, it will essentially submit the print job 8 times so after the first job is done, i will have to wiat for it to process the file and spool it to the printer, etc. it will take a long time. It does not matter it is Word, PDF (using Acrobat reader or Preview), or PowerPoint, same time of respond.
Same printer, network and file print from Windows 7 will spool, process once, and then the printer will just fly thought the copies as if it is all one document, so i can get this done in say 1 min. The printer print fast after 1 page.
So. Let's say I want to print 1 page of a document (it can be just text), and say i want 50 copies. then forget it. It will sit there and spool, process and etc each page for 30 sec. And windows 7 (even xp) will treat it like it is printing one document of 50 pages.
Any idea if this is a feature of Mac or HP? couldn't be HP if windows 7 print ok.

This works for me, because I'm tired of waiting for Adobe to find solutions: open your pdf document with Preview and print from there. It will print cleaner and faster than any Adobe application.

C309a print copies of 1 page documents

I've been using Photosmart printers with duplexing for years. In the past, I've always left two-sided printing on "Automatically" as the default for general printing. If I had a one page document, and asked it to print, say, 3 copies of the document, I would get 3 pages with one side each.
I just intalled a C309a on the same Vista system I've been using in the past. I've set my printer default to "automatically" for two-sided printing. Now if I want to print several copies of a one-page document, it prints both sides of the page. So a request for 3 copies of a one-page document results in two printed pages - one page has the document printed on each side, plus one page has it on only one side.
The only way around this seems to be to alternate between printing shortcuts. If I have a one-page document, and I want several copies, I have to switch to the General setting with two-sided printing set to "off". If I want a multi-page document duplexed, I have to switch over to the Two-Sided printing setting. I'm disappointed because I didn't have to switch back and forth with any of my former Photosmart duplex printers.
Is my new C309a really supposed to work this way? Or should I be able to get 3 single-sheet copies of a one page document, even with two-sided printing set to "Automatically", like all my previous printers allowed?
Thank you!

audpilot,
same boat, same printer...
this is not how the other printers worked.
is there any workaround?

Print copies of layout

Similar Messages

Maybe you are looking for