Print directly to the printer from Oracle 9I

Please it is possible to print directly to the printer from Oracle 9i without having to show the report on the web.

Similar Messages

Is there any method to export the data from oracle 10g in any format !!!!!

is there any methods to export the data from oracle 10g in the format of excel or csc or txt or anyother. i already downloaded the sql developer tool but it only exports the data of upto one lakh rows ,but i have two tables of more than 3 lakh and 10 lakh rows respectively.for this i used 'where' command to break the file through sql developer but that didnt work
plz help me out if any thing possible
i need to again import this data into microsoft sql if there is any direct method plz let me know
its urgent
Message was edited by:
user628031
Message was edited by:
user628031

Take a look at DUMP_CSV function by Tom Kyte.

How to Transfer the Data from ORACLE APPS to SAP

Hi Gurus,
Here are my couple of quieries regarding Data Migration from Legacy(Oracle Apps) to SAP.
1. How to link between Legacy system(ORACLE APPS) and SAP ?
2. How to migrate the data from Oracle tables to SAP directly, instead of loading the flat files(.txt, .xls) ?
Please respond to my queries ASAP.
Thanks,
SAPSURE.
Edited by: sapsure on Sep 9, 2010 11:39 AM
Edited by: sapsure on Sep 10, 2010 2:32 PM

1. How to link between Legacy system(ORACLE APPS) and SAP ?
        If you have SAP PI in place then you can interact with oracle database tables directly from PI and then data can be posted to SAP transactions through IDocs/BAPIs.
        If you did not have SAP PI still you can do JDBC connection directly from ABAP program. Not sure about the exact steps check in forum.
2. How to migrate the data from Oracle tables to SAP directly, instead of loading the flat files(.txt, .xls) ?
        If you want to directly post the data SAP transactions (I hope not directly to SAP tables) then connection needs to establish through ABAP program or Via. PI.
Regards,

Error, while pushing the data from Oracle to MSSQL.

Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.

[email protected] wrote:
Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.This is an error from SQL Server being passed back to Oracle so you can see the problem.
What it is saying is that you are trying to insert (or update) data to a database view and that view contains a column that is either a constant (literal) value or is derived (a calculation, formula or string concatenation etc.).
As such, you can't insert or update data on that column because it has nowhere to go on the database table(s) that underly the view.

Upgrading the database from Oracle 8.0.6 to Oracle 9.2.0

Dear SDN,
We are in the process of upgrading SAP 4.6b to 4.7 R/3 Enterprise.
Source Release:Windows 2000/Oracle 8.0.6/SAP 4.6b
Target Release:Windows 2000/Oracle 9.2.0/SAP R/3 4.7
Can anyone help us in explaining the procedure for upgrading the database from Oracle 8.0.6 to Oracle 9.2.0.
Thanks n Regards ,
Anantha Raman E.

Thanks Mr.Mohan
We tried to upgrade from 8.0.6 to 8.1.7 with the help of Inst Guides from service market place..the thing is we created another oracle home with new DBSID ither than the old DBSID...when we started the migration using 8.1.7 Data migration tool its not responding after the first phase CHECKING THE OLD DATABASE...
Pls help us in this regard
Whether we have to migrate or what...

How to copy the Data From Oracle Table To SAP Table

Hi Friends,
We need to copy the data from Oracle Database Table to SAP Table. The data should be updated simultaneously in both tables . Should I write a program that contains the native sql statement like EXEC SQL PERFORMING WRITE,....
I appreciate any suggestions regarding this.
Regards
CSM Reddy

Hi,
since you posted this question in the DB2 forum I assume that you are using a DB2 database for your SAP system.
To access a table from a legacy ORACLE database you may use the DBSL multiconnect feature. I.e. you open a secondary connecction in the SAP system to your ORALE database. You can then ready the data from the ORACLE database into an ABAP internal table and insert it afterwards into the DB2 table on the main connection.
Another way to access an ORACLE table from a DB2 database is to use the DB2 federated database feature. This requires a little bit more DB2 skill. With this feature you can make the ORACLE table visible within the DB2 database. To copy data you can then simply use a "INSERT ... SELECT" statement.
Regards
Frank

Replicate the data from oracle to sybase

Hi, I have to replicate the data of some of the tables from Oracle 10g to Sybase.
Here the data from the table is live data (OLTP).
Is there any process like materalized view so that data is refreshed from Oracle to Sybase periodically.
Please let me know the Process for the same.

Hello,
as a starter you may want to read the following Metalink note:
Note 283700.1: How to replicate Data between Oracle and a Foreign Datasource
Please let me know whether this is helpful.
Best regards
Wolfgang Kobarg-Sachsse

Is there a way to upload files directly to the cloud from bridge cc?

Is there a way to upload files directly to the cloud from bridge cc? I use bridge to organize my files. It would be a lot easier if I didn't have to drag and drop files into the cc folder, I was hoping that there might be an easier way.
thanks,

When you save them just make sure you save them to your Mac and not iCloud. For those that already exist, you can move them from iCloud by dragging and dropping them to somewhere else on your Mac. To see all the files in iCloud choose file > open in either pages or numbers.

Pull the data from ORACLE

Hi Guru's,
I would like to know ,How to pull the Data from Oracle tables to BW.
tell me scratch onwards...
regards
sekhar ch

Hi...
In the admin workbench open the modeling tab and select Source Systems
In the right pane, right-click on Source Systems and select Create
A dialog requires you to define the type of source system. Select Database System
Enter a description for the source system
Once you accept the definition of the source system, you have to provide the following information, save and back out:
DBMS: ORA (Oracle)
User Name: Your UID
DB password: Your pwd
Conn. Info: sql*net string
Select Permanent connection if this is the case
If everything went well, you should see the new source system. When you do a right-click and ask for the DataSource overview, the first time you execute it you will be prompted to generate the application hierarchy
In order to test connectivity, right-click on the source system and select Select Database Tables
The following screen shows up. Click on the execute button
any tables or views that you have access through your UID
Select a table or view and click on Edit DataSource
To test data retrieval, click on Display table contents
Designate the application component, determine the type of DataSource (Text, Master data, or Transaction data) then generate the DataSource
with regards,
hari

While running the report from oracle apps

Hi,
While running the report from oracle apps i am getting the below error.
First time when i ran it it works fine in the second time it is giving the below error like
MSG-00001: After SRWINIT
MSG-01000: Label sets failed
MSG-01000: ORA-06502: PL/SQL: numeric or value error
REP-1419: 'beforereport': PL/SQL program aborted
Can anyone please give your kind advice on it.
Thanks
Surya...

what is the application version ?
is it seeded report ? or customized
regards

When send the report directly to the printer from Oracle IDS 9i

Hi.....
I m using Oracle IDS 9i, Oracle AS 9i and Database 9i for my new project.But i m facing a problem when i m trying to show a report from oracle IDS 9i.When i send the report directly to the printer without showing it,then the printer connected to the application server is working.But the printer connected to with PC(From where a send the command) is not working but printer connected with AS is working,but not that one which one i m wanting.....Why this problem is happening?Can anyone help me?
KSI

Note:It is always better to have network based printers rather then PC shared printers. What that means is your printer is not connected to a PC. It has a direct connection to the network via NIC. You would then setup the printer on your AS in the printers setup. If the AS is rebooted you do not need to authenticate the printer shares again with a network based printer.
If I understand you correctly, you have a printer connected to your AS(application server) and a printer connected to your PC. You can submit a report direct to the printer connected to the AS but cannot send a report direct to your printer connected to your PC.
From the symptoms you described, the problem is usually associated with the AS not being able to see the printer shared on your PC. You either have the address to your printer address defined wrong or your AS is trying to direct a job to your printer but doesn't have rights to do it.
First, Try to print a notepad job to your printer attached to your PC from the AS. This will tell you if you have access to do so or not.
- If it can't, you need to figure out why? This has nothing to do with oracle.
Second, thing to check is your Oracle "Report Queue Manager" on the AS. Make sure that you can submit a report manually from the Report Queue Manager. If it fails the "Report Queue Manager" will give you useful errors as to why it failed. This will help you isolate the problem.
Third, Once you can submit a job from the reports queue manager manually to your shared printer you should be able to submit from your application direct. If it still does not work your address to the printer is incorrect. Try submitting manually through the reports queue manager again. When selecting printer you will be given a list of accessible printers from the AS. Select the one connected to your PC. Once selected the full network address will appear. Copy and use this as the printer location in your job submission through your application.
That's it... Where using this right now and it works great. Hope this helps.
Eric.

I want to move the data from oracle 8.0.5 to oracle 10g

Dear Gurus i want to move my data exist in oracle 8.0.5 to oracle 10g, what is the simplest way to do that without loss of data and time.
thanx and regard

Since you are on 8.0.5, there is no direct path upgrade for you.
You need to first upgrade to 8.1.7.4.1 at least before you can directly migrate to 10gR2.
You can refer Metalink note 316889.1 for this purpose.
Another option would be to simply export the data from 8.0.5 version and import into 10g database.
Simply stated, there is no method which will not take time for this purpose but there would be no data loss (assuming you are not going to change the character set of the database).

Need To Create a table in Sql Server and do some culculation into the table from Oracle and Sql

Hello All,
I'm moving a data from Oracle to Sql Server with ETL (80 tables with data) and i want to track the number of records that i moving on the daily basis , so i need to create a table in SQL Server, wilth 4 columns , Table name, OracleRowsCount, SqlRowCount,
and Diff(OracleRowsCount - SqlRowCount) that will tell me the each table how many rows i have in Oracle, how many rows i have in SQL after ETL load, and different between them, something like that:
Table Name OracleRowsCount   SqlRowCount  Diff
Customer                150                 150
0
Sales                      2000                1998
2
Devisions                 5                       5
0
(I can add alot of SQL Tasks and variables per each table but it not seems logicly to do that, i tryid to find a way to deal with that in vb but i didn't find)
What the simplest way to do it ?
Thank you
Best Regards
Daniel

Hi Daniel,
According to your description, what you want is an indicator to show whether all the rows are inserted to the destination table. To achieve your goal, you can add a Row Count Transformation following the OLE DB Destination, and redirect bad rows to the Row
Count Transformation. This way, we can get the count of the bad rows without redirecting these rows. Since the row count value is stored in a variable, we can create another string type variable to retrieve the row count value from the variable used by the
Row Count Transformation, and then use a Send Mail Task to send the row count value in an email message body. You can also insert the row count value to the SQL Server table through Execute SQL Task. Then, you can check whether bad rows were generated in the
package by querying this table.
Regards,
Mike Yin
TechNet Community Support

Not able to retrive the recordset from oracle stored procedure in VC++

Hi,
I am trying to retrieve the records from the reference cursor which is an out parameter for an oracle 9i store procedure in VC++ application. But it is giving the record count as -1 always. Meanwhile i am able to get the required output in VB application from the same oracle 9i store procedure .
Find the code below which i used.
Thanks,
Shenba
//// Oracle Stored Procedure
<PRE lang=sql>CREATE OR REPLACE
PROCEDURE GetEmpRS1 (p_recordset1 OUT SYS_REFCURSOR,
p_recordset2 OUT SYS_REFCURSOR,
PARAM IN STRING) AS
BEGIN
OPEN p_recordset1 FOR
SELECT RET1
FROM MYTABLE
WHERE LOOKUPVALUE > PARAM;
OPEN p_recordset2 FOR
SELECT RET2
FROM MYTABLE
WHERE LOOKUPVALUE >= PARAM;
END GetEmpRS1;</PRE>
///// VC++ code
<PRE lang=c++ id=pre1 style="MARGIN-TOP: 0px">ConnectionPtr mpConn;
_RecordsetPtr pRecordset;
_CommandPtr pCommand;
_ParameterPtr pParam1;
//We will use pParam1 for the sole input parameter.
//NOTE: We must not append (hence need not create)
//the REF CURSOR parameters. If your stored proc has
//normal OUT parameters that are not REF CURSORS, you need
//to create and append them too. But not the REF CURSOR ones!
//Hardcoding the value of i/p paramter in this example...
variantt vt;
vt.SetString("2");
m_pConn.CreateInstance (__uuidof (Connection));
pCommand.CreateInstance (__uuidof (Command));
//NOTE the "PLSQLRSet=1" part in
//the connection string. You can either
//do that or can set the property separately using
//pCommand->Properties->GetItem("PLSQLRSet")->Value = true;
//But beware if you are not working with ORACLE, trying to GetItem()
//a property that does not exist
//will throw the adErrItemNotFound exception.
m_pConn->Open (
bstrt ("Provider=OraOLEDB.Oracle;PLSQLRSet=1;Data Source=XXX"),
bstrt ("CP"), bstrt ("CP"), adModeUnknown);
pCommand->ActiveConnection = m_pConn;
pParam1 = pCommand->CreateParameter( bstrt ("pParam1"),
adSmallInt,adParamInput, sizeof(int),( VARIANT ) vt);
pCommand->Parameters->Append(pParam1);
pRecordset.CreateInstance (__uuidof (Recordset));
//NOTE: We need to specify the stored procedure name as COMMANDTEXT
//with proper ODBC escape sequence.
//If we assign COMMANDTYPE to adCmdStoredProc and COMMANDTEXT
//to stored procedure name, it will not work in this case.
//NOTE that in the escape sequence, the number '?'-s correspond to the
//number of parameters that are NOT REF CURSORS.
pCommand->CommandText = "{CALL GetEmpRS1(?)}";
//NOTE the options set for Execute. It did not work with most other
//combinations. Note that we are using a _RecordsetPtr object
//to trap the return value of Execute call. That single _RecordsetPtr
//object will contain ALL the REF CURSOR outputs as adjacent recordsets.
pRecordset = pCommand->Execute(NULL, NULL,
adCmdStoredProc | adCmdUnspecified );
//After this, traverse the pRecordset object to retrieve all
//the adjacent recordsets. They will be in the order of the
//REF CURSOR parameters of the stored procedure. In this example,
//there will be 2 recordsets, as there were 2 REF CURSOR OUT params.
while( pRecordset !=NULL ) )
while( !pRecordset->GetadoEOF() )
//traverse through all the records of current recordset...
long lngRec = 0;
pRecordset = pRecordset->NextRecordset((VARIANT *)lngRec);
//Error handling and cleanup code (like closing recordset/ connection)
//etc are not shown here.</PRE>

It can be linked to internal conversion. In some case, the value of internal or extranal value is not the same.
When you run SE16 (or transaction N), you have in option mode the possibility to use the exit conversion or not.
Christophe

Is it Possible to upload the output from Oracle reports To Access database

Hi All,
Wish you All a Very Happy New Year.
I have a query.Is it possible to
upload the output from the Oracle reports
to the Access database???
Any suggestions would be appreciated.
TIA
sg

Hi sg,
Research the DDE option.
Dynamic Data Exchange (DDE) is a mechanism by which applications can communicate and exchange data in Windows.
I have imported data into the excel spreadsheet using DDE built in functions. I am sure it can work with MS Acess as well. If not, then you need to create a 2 step process .. reports -> excel -> access.

Print directly to the printer from Oracle 9I

Similar Messages

Maybe you are looking for