Print document reverse

Hello,
what is the function to reverse print document,
I tried FKK_INV_REVERSE_INVDOC_SINGLE0 but it doesn"t work. maybe I don"t put the right value in data entry.
Thanks in advance,
Ben

Try with this FM : ISU_REVERSE_CA_BILL_DOC
Regards,
Siva

Similar Messages

Document prints in reverse, what setting can I change to correct this?

Document prints in reverse, what setting can I change to correct this? Not a printer problem - documents print in correct order when using other programs. Using Acrobat X Pro on a Mac.

One more place to check. Open a document you'd like to print, then click the 'Printer...' button. Hit 'Yes' to the warning dialog box that comes up. For your specific printer, this might already be enabled. Change the drop-down menu that says 'Layout' to 'Paper Handling'. It could be that the Page Order preference has been changed here too. Just a thought!
-David

Debit/credit indicator in Print document (DBERDL-SHKZG)

Hi,
I noticed that if a print document is reversed, the reversal document containts the same amount as the reversed document rather then the original amount * -1. The debit/credit indicator is initial as well.
Is it normal?
As I have FI/CO background, I find it strange.
Thanks!
Kind regards,
Mariya

Hi Mariya,
You are correct in that the fully reversed Print Document will not have *-1 to the amounts. The header field Doc Reversed (ERDK-STOKZ) specifies whether the doc is a reversed one or not and all other logic can be based on this and the Reversal Document No (ERDK-INTOPBEL)
However I have noticed when you have done an adjustment reversal of the Invoice you would then have 3 Billing Docs for an Invoice 1 Old Billing Doc, 1 reversal billing doc (with old billing docs * -1) and 1 new billing doc which is the correct one.
Hope this helps.

FB08 Print of reversal.

Hi Gurus,
If I have reversed an FI invoice with TC OB08, I cannot print it. I have tried to print with the same correspondence type as the invoice and also the correspondence type for credit memo, but get the error.
No relevant item in document xxx; no output and No output of the correspondence.
I am not sure how to trigger that the correspondence type should also work for reversed invoices, please help
Thanks
Pernille

Hi,
Further to your mail, do the following and how I am doing in case of your situation:
1. Create New Customer
2. Post a document with F-22 on 13.07.2010
3. See LID report with FBL5N
4. Post reversal document with FB08 on 13.07.2010, Document type "DA " would be posted.
5. See LID Report with FBL5N for all items with posting date range 13.07.2010 to 13.07.2010
6. Change the 2nd document (deleted document) text, with edit mode.
7. Take the print out of the FBL5N for filing (Shift+F1), for filing or for sending.
Regards
VG
P.S.: Once document reversed with FB08, you can print the Document type "DA " which was posted.

Printing in reverse on Officejet 6600

How can I print in reverse for t-shirt transfers?

Hi, Please flip image before print: http://support.hp.com/us-en/document/bpa00531 Regards.

EPrint always prints in reverse order

Hi,
If I email somthing to my printer it always prints in reverse order, it's very annoying. Is this somthing I can change?
It's a Photosmart Premium Fax C410b
Thanks
Paul

It has been 6 months since the last reply. Any progress on this issue? It would seemingly be simple to add a new option to the same ePrint options screen (which lets you choose color or b&w, for example) to choose between printing the last page first (the current selection) and printing the first page first (what most users would want, especially for very long documents).
If there is a planned date to release this feature, the ability to print first page first, please post the expected date in a reply to this post.

FI-CA document type when a print document is created

Hello everybody,
We have been searching events (e.g. 0061)/user-exit to change the FI-CA document type when a print document (based on our own logic) is created with transaction EASIBI without success. Maybe you have enhanced something in another project. Can you share you experiences?
Thanks in advance.
Fernando.

We have enhanced event R999.

Major problem saving and printing documents on two computers

This is a bizarre problem that seems to have been transferred from my old MDD to my new Mini when I migrated all my old data and it has me baffled. My apologies if this explanation seems long and complicated but I want to be pretty thorough.
About a month ago I started experiencing a problem with printing. I noticed when printing a sheet of business cards that the page was getting compressed, for lack of a better word, vertically. This was very noticeable because the trim marks on the side of the page were not lining up with the perforations and each row of cards was getting progressively closer to the top as each row was printed. In other words, the first row of cards was okay but then the next row was a little too far "north", the next row a little more, the next row a little more, etc. The bottom of the page was not cut off, it was just squeezed up a bit but not enough that you could tell that the proportions were off. Now I see that many of my documents are like that no matter what application I've use to create them – Pages, Illustrator, Avery DesignPro. What's even worse, I've used Pages to create a sheet of business cards for a friend and Illustrator to make packaging labels and she's having the same problem printing the PDFs of the labels on a different computer. What this seems to tell me is that something has been corrupted and the computer is saving messed up files.
So, about ten days ago I got a Mini and migrated my data using Migration Assistant. And the problem has now been transferred to the Mini. So I now have two Macs connected to two different HP printers that are both incapable of printing (and apparently saving) documents in the proper proportions.
Now, a truly weird thing is that I printed a test sheet of business cards from the Mini on the printer connected to the MDD (via printer sharing) and it appeared that the document printed at the correct length. However, another document, a sheet of labels created in Illustrator, printed at the right length but one edge was slightly cropped off. Grrr.
Anyway, as I said, until about a month ago everything worked fine so something got messed up at that time to cause this problem with saving and printing documents. I need to get this resolved for business reasons – I'm an aspiring designer – but the only thing I can think of doing is wiping out my Mini and reloading everything except my account settings from Time Machine unless someone has advice on what to do. Help! (And yes, I've checked to see that page scaling was always set at 100%.)

Well, I've just about had it. I erased the disk, reinstalled the OS, Adobe CS4, and iWork. I did not use Migration Assistant this time to restore my settings but still my Mac prints documents in the wrong dimensions. Could this be a sudden HP problem? It seems to me some system setting somewhere is making my computer save and print documents in the wrong size. I now have a computer that is almost useless for designing. Lucky me.

Problem Printing Documents - No Doc Flavors Supported

Hello everybody. I've been trying to implement a print feature in my applications and I've had absolutely zero luck. Basically, I'm trying to print the contents of an html file. However, there are no PrintServices that show up on my machine that support DocFlavors text/html, or even text/plain.
I searched all over the Internet, but the only tutorials I found involved printing GUI components. I tried putting everything in a JEditorPane and then printing it, but the table is so large horizontally, it runs off the side, so I don't think that route will work.
I checked IRC, scanned through all of Sun's tutorials and print service API documentation, and even searched around for open source Java word processors so I could check how their print features are implemented, but I can't find anything to help me figure this out. I know there has to be a way, though... or stuff like EIOffice and ThinkFree.com wouldn't be able to work. Can somebody please point me in the right direction?
Here's the current code I have:
          //display print dialog
          DocFlavor df=new DocFlavor("text/html; charset="+DocFlavor.hostEncoding,"java.io.InputStream");
          PrintRequestAttributeSet attributes=new HashPrintRequestAttributeSet();
          attributes.add(new javax.print.attribute.standard.JobName("NutraSmart Menu",null));
          PrintService[] services=PrintServiceLookup.lookupPrintServices(df,attributes);
          PrintService service=null;
          if(services.length>0)
               service=ServiceUI.printDialog(this.getGraphicsConfiguration(), this.getX()+50, this.getY()+50, services, services[0], null, attributes);
          else
               JOptionPane.showMessageDialog(getContentPane(),"No print services could be found to print this menu.","Error printing menu",JOptionPane.ERROR_MESSAGE);
               nutrasmart.debug(nutrasmart.ERROR,"Could not find any services to print menu");
          //print menu
          if(service!=null)
               try
                    //create temporary HTML file to print from
                    File tmpfile=File.createTempFile("nsmenu",".html");
                    tmpfile.deleteOnExit();
                    String tmpfilestr=tmpfile.getPath();
                    export_HTML(tmpfilestr);
                    FileInputStream tmpfilestream;
                    try
                         tmpfilestream=new FileInputStream(tmpfilestr);
                    catch(FileNotFoundException e)
                         JOptionPane.showMessageDialog(getContentPane(),"A problem was encountered while preparing the menu to print.","Error printing menu",JOptionPane.ERROR_MESSAGE);
                         return;
                    //print document
                    DocPrintJob pj=service.createPrintJob();
                    Doc doc=new SimpleDoc(tmpfilestream,df,new HashDocAttributeSet());
                    pj.print(doc,attributes);
               catch(Exception e)
                    JOptionPane.showMessageDialog(getContentPane(),"There was a problem with printing the menu.","Error printing menu",JOptionPane.ERROR_MESSAGE);
                    nutrasmart.debug(nutrasmart.ERROR,"Error printing file",e.getMessage());
          }

Really we have a crazy font management.
We have more than 9000 fonts in the /Library/Fonts
To avoid conficts between the the installed system fonts and the Document font folder, we don't use the document font folder, so that we use always the /Library/Fonts/ fonts installed. Anyway some time ago we also used the Document Font folder and we got the same problem.
I think that your idea about closing the document before the printing process has been finished is very interesting. What I do is :
doc.print(print_preset);
doc.close();
But I don't how can I test if the document is being closed before finishing the printing process.
Regards

How do I get my Kodak ESP 3.2s printer to print documents from my iPad ?

I have an iPad
I have a Kodak ESP 3.2s all in one printer
I have set it up to print via my home wi fi using my normal laptop with Microsoft
However I couldn't work out how to print from my iPad as its not configured for Apple!
I downloaded Kodak Pic flick HD app
This means I can now print photos from my iPad! Great
But still can't print documents it seems I get a message saying No AirPrint Printers Found
Any advice very welcome
Thank you
iknow0

Airprint is a technology created by Apple Inc. and introduced in iOS 4.0 that allowed iPads, iPhones, and iPod Touches to print directly to Airprint compatible printers. Unlike computer printing where the drivers, fonts, etc. are stored on the computer and sent to the printer with the document with Airprint fonts, drivers, etc. are stored on the printer and need not be sent with the document.
The solution to your problem is 3rd party software which both Jim and I suggested to you.

How can i use only black cartridge for printing documents

i have today installed hp 1510 all in one printer, it uses ink from the both cartridges i just want to use black ink for printing documents, how can i do that
This question was solved.
View Solution.

Hi @sandeepv
I can help you with your print settings, so the printer will print black and white only.
If you have a Mac operating system, use the instructions below.
Printing with the Black Print Cartridge Only option
Click File and then click Print.
Make sure your printer is selected.
Verify that the Preset option is set to Standard.
In the Copies & Pages menu, select Select Paper Type / Quality.
NOTE:If this option is not available, click ColorSync. Then click the down arrow beside Quartz Filter and change the setting from None to Black & White.
Select the Paper tab.
From the Color option menu, select Grayscale.
Select the Color Options tab.
Select the Black Print Cartridge Only option.
If that option is not listed, then it is not available. The printer will print using only the black cartridge, however, printing with one cartridge will be slower than printing with both cartridges.
NOTE:To save the setting, click the arrow next to Preset and select Save As. Save the Preset option as Black Cartridge Only and then click OK. Then, the next time you want to print with just the black cartridge, select the Black Cartridge Only Preset. -Source
If you are using a Windows operating system, use the instructions in the following link. Although this document is titled Changing Print Settings in Windows 8 it can be used for other Windows operating systems. The navigation from Windows 8 to older Windows operating systems would vary, please let me know if you are using a different operating system and/or if you require additional assistance.
I hope this helps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

I have an 10x14" InDesign image that I'd like to shrink to fit within a 8.5x11 printed document.

I have an 10"x14" InDesign image that I'd like to shrink to fit within a 8.5"x11" printed document (using InDesign) without losing the quality of the image (especially on print). What is the correct/least destructive process to do this?
And how is it that you can view different image sizes on Flickr (of the same image) and it doesn't seem to effect the quality of the image?
I have tried saving/exporting the InDesign image as an EPS file, then opening the file in Photoshop, adjusting the size to my liking, saving it as a Photoshop file, then placing that file in a new InDesign document, and the image comes up distorted looking/pixelated even with my screen zoomed at 100%. I've also tried this same process with exporting it as a PDF file instead of an EPS file with the same distorted/pixelated results.
Help!?!?! Thank you in advance!!
Linds10m

I am assuming you are in InDesign CS5:
Change your InDesign Document Size, but before you do this you must make sure the "Enable Layout Adustment" is on.
Under: Layout/Layout Adjustment/Check the "Enable Layout Adjustment" box is checked and adjust Snap Zone.
ALSO: Make sure your horizontal and vertical margins touches your live area.
Then you can change size of document

My HP officejet 6210 no longer prints documents from my Mac ibook G4 running 10.4.11; starts to process the document, but then stops the print,if I restart print same thing happens

My ibookG4, running 10.4.11 suddenly decided it no longer wants to print documents thru my HP officejet 6210 all-in-one printer. So far I've tried emails, excel and word all with the same result. The computer will start to process the print request (processing seems to take longer than previously) and then suddenly the processing stops and a red exclamation mark appears next to the printer image at the bottom of screen. When I pull up the printer utility it tells me the printer is "stopped". If I restart it, the process begins all over again until once again it stops. I have already deleted the printer completely from my computer and reinstalled the software fom the HP site. For some reason had a really tough time finding the correct print drivers on the HP site, but did finally locate them. I have not even attempted scanning during this (I see lots of people reported issues with that for the 6210), I would be happy if I could at least print again. I am connecting via USB. Is there some way to fix this?

Hi Evelyn,
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US

How to create print document for payment to customer through cash journal

Dear Sirs,
I have a problem with print document from cash journal. I enter a payment to customer (when I turn the money to customer) and the system makes right posting, but when I try to print this point, system printing document for incom from customer. I'm using business transaction for customer posting in cash journal. I would like to know how I have to manage this posting - payment to customer, or incoming from vendor (returnes advances from emploee)?

Hi,
please check whether the two solutions below work:
1. create a contract with milestone billing plan where there are only down payment billings, so that on the basis of the contract you can generate down payment requests and then relevant down payments, release the contract to a sales order which can then be delivered and billed, manually clear the billing document with the down payments
2. from FI module, create down payment requests via t-code F-37 directly, and then down payment posting, generate sales order directly, and then deliver and bill, manually clear the billing document with the down payments

Payment document reversal

Hi,
Am doing payment document reversal for normal company code.document using function module
Point1;
CALL_FBRA (am passing BUKRS,AUGBL,GJAHR) executing fine but unable to grap the REVERSE / RESET fields)
please let know we will i get reverse aand reset??
Pooint 2:
For cross company code am using , CALL_FBRA for reset. And for reverse i came to know their is another function module
(Please let me know the FM, i think from FBU8, but unable to identify).
It would great help one who help on this.

Hello,
Function module J_1B_FBRA_POSTING_AUFRUFEN reset and reverse clearing document.
I hope tihs FM helps to you.
Regards,
Burak

Print document reverse

Similar Messages

Maybe you are looking for