Print Module confusion - settings, templates, and migration to new system.

I'm a little confused by some aspects of the print module. First, I tried copying some of my print templates from Lr1.3 over to the print template folder in 2.3, and they didn't' seem to work right. The layout display in the upper left preview window did not match the layout of the main preview window, and many of the settings were not right, such as what printer was supposed to be used. Is there a problem with using 1.3 templates in 2.3?
Next, I can select a paper type in the printer driver AND in the Lr color management section. Do these each do different things?
Also, what does the Lr "Print Resolution" do -- i.e. how does it interact with the printer driver "quality" options, which sets the resolution? Does one setting override the other? If select the maximum quality (i.e. max resolution) in my printer driver settings, should I uncheck the Lr "Print Resolution" setting?
Finally, when I migrate from one system to another, am I supposed to manually copy over all my templates? I would have thought that these would be saved in the catalog, but apparently this is not the case.
Thanks for clarification on these issues,
Larry

Does anybody have any feedback on this? I could really use some help since even after numerous searches I still cannot find the answers to the question above.
Thanks,
Larry

Similar Messages

Post installation for Portal and errors for new system

I've recently installed a NW 7 based ABAPJAVA System with Portal Components (EPEP Core) on Windows + Oracle for demo.
1 ) Since, I am facing a lot of errors after the installation, I think I have missed to carry out some post-install steps. Can someone please suggest on the post-installation steps in some detail ??
2) When I try to open the newly installed portal using http://fqdn_host:50000/irj ; the browser shows some exception has occurred: However, I tried to restart the system (everything including db) as suggested in some of the other links and login went fine.
After I logged in to the portal (/irj) as j2ee_admin; I am trying to open Content Administration --> Portal Content OR System Administration -> Transport OR --> System Configuration etc ; but I am getting the error coded below::
An exception occurred while processing a request for :
iView : pcd:portal_content/every_user/general/defaultDesktop/frameworkPages/frameworkpage/com.sap.portal.innerpage/com.sap.portal.layoutPortal1_WAandNavPanel
Component Name : com.sap.portal.layouts.framework.WAandNavPanel
Error occurs during the rendering of jsp component.
Exception id: 05:05_25/03/10_0032_7012350
See the details for the exception ID in the log file
The log file (that I believe is the trace file in cluster/server0/log/defaultTrace.0.trc) says (This gives several such exceptions listed in the file.) (I'll put the log as a comment to the post because of the limit on max characters)
Note that the link http://punitp84712d:50000/nwa works absolutely fine. PFB the J2EE process details.
J2EE Process Details
Name Type PID Status Debug
Dispatcher ID7012300 J2EE Dispatcher 3,240 Running Disabled
SDM SDM Server 4,736 Running Switched off
Server0 ID7012350 J2EE Server 596 Running Disabled
Can someone please help me through this and let me know how did you draw your inference. Let me know if there is any other place that can give me more information / logs on the error.
Thanks,

Hi Jay,
Please check that server is Running but not able to open some application. I would suggest to check the Enviromental Variable for My Computer :-
- Database Enviromental variable is added or not under "user vairable for <UserID for Server Desktop>
- Check JAVA_HOME Enviromental variable is added or not under "System Variable'
Check at (My computer > Properties >> Advance >> Startup and Recovery >> Enviromental Variable >> System Variables/User varaible
Update your server IP address and host name in host file entry at (RUN > drivers > etc > host file) and check database server services (Run > Services.msc >> Start your database services manually and change prperties as automatic)
Then try to open portal URL http://<Host>:<Port>/irj/portal or http://<Host>:<Port>/index.html
Hope it helps
Regards
Arun

Keeping backups of application data and migrations to new ipod?

I'm planning to share an iPod Touch with my younger brother since I so rarely use it so I'm barely familiar with basic usage. I want him to have his own account separate from mine, but I would like to be able to backup his data and restore my data when the time comes. The iPod should either only have his data or mine, but obviously not both. I might even buy myself a new ipod touch or migrate to an iPhone.
So the question is:
a) Does backups take backup of application data such as save games and application settings?
b) Can I restore all the applications, app data, game saves, music and video to another ipod touch/iphone in the future? i.e. migrate to another device?
c) How do I backup the backup? i.e. if I keep this backup on my PC (Windows) and need to wipe the computer clean and re-install Windows. How do I retain the iTunes backup data?
d) How do I perform the backup? Yeah, I literally used the iTunes application a dusin times at most, so have little clue how to operate it.
Please help, since I'm not familiar with my own iPod Touch!

this will answer most (if not all) your questions: About Backups.
also check out iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

Moving IPhoto 08 to internal hard drive - and migration to new?

We have 2 users on the Mac. What is the best way to move IPhoto to an internal hard disk? Don't want to have any permissions issues or create a 2nd copy of the application.
It was suggested to simply drag and drop from the applications to the 2nd hard-drive. Will both users be able to see it and/or is there an even better way?
Getting ready to migrate to our IMAC. I assume we need to partition the hard drive of the other MAC before we migrate so it will see the 2nd drive with IPHOTO?
Please help and Thanks!

Actually, I was told that I should move IPhoto to an external disk for safekeeping and future growth.
An iPhoto installation has two parts. In your Applications folder there is iPhoto.app. This is the software. It doesn’t change size. It never needs to move from the Applications folder and can cause problems if you do.
The second part of an iPhoto installation is the +iPhoto Library+. This includes all your Photos, the various database and support files. This can grow as you add more and more photos to it.
It's the Library that you need to make a back up for. iTunes works in the same way.
By default, the iPhoto Library is in your Pictures Folder. The iTunes Library is in your Music Folder.
Am I correct in assuming it would be safer and wiser to use an external drive for IPhoto/ITunes?
It makes no difference. It certainly makes sense if the disk is filling up, but that's a disk space issue rather than an iPhoto/iTunes issue.
There is nothing to be gained from partitioning the new Machine. FIles on another partition are not a back up.
To move an iPhoto Library: Make sure the disk is formatted Mac OS Extended (Journaled)
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
To +migrate to a new Machine+
To move an iPhoto Library to a new machine:
Link the two Macs together: there are several ways to do this: Wireless Network, Firewire Target Disk Mode, Ethernet, or even just copy the Library to an external HD and then on to the new machine...
But however you do choose to link the two machines...
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Regards
TD

Printer compatible with Windows 2000 and Windows 8 operating system?

My office needs to access a terminal server hosted offsite. The terminal server uses Windows 2000. My laptop is Windows 8. Since I upgraded my laptop I am no longer able to print. Do they make a computer that is compatible with both versions of Windows? Is there a fix? I should also mention, I purchased a new HP and it wouldn't work either. augh!

Windows 2000 has been successfully tested with the AT interface card. The file: "Win2000Issues.rtf" (located in the "nifbus" directory) illustrates how to install the AT-FBUS interface card under the Windows 2000 platform. However, the PCMCIA-FBUS card is not supported at this time. In order to use the software under Windows 2000 the "MFC42.dll" file must be in the same folder as the Configurator, otherwise display problems may be experienced.
Windows ME has also been tested with both the AT and PCMCIA interface boards and appears to work well. Additionally, the Configurator software has proven to be stable under ME.

Installation of driver for p2014D printer for both 7.0 and 8.0 operating systems

I can not find a 2014d driver for the duplex printing. All I have found is the 2014 driver.

Hello JN140, and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

I have installed the Nosquint add-on andhave set it up to the zoom levels I desire. Why, whenever I go from tab to tab, I lose my settings? and page every new page on a site as well? annoyed as heck!

I have to mouse over the icon every time I leave a site, or tab, or browse different pages within a site. I have tried all the options to fix this, and do not know what to do. Or is this just the way this works. This is tedious at best.

* Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode.
* You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
* To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting Firefox will: Use custom settings for history
* Uncheck: [ ] "Automatically start Firefox in a private browsing session"
You can also check:
* http://kb.mozillazine.org/Preferences_not_saved

Can I download and install a new system

I don't have the original system disks, and according to the GEnious at Apple story in Manhassat Long Isand I need to do a clean install to fix certain issues including the error i keep getting when I try to update software.
Can I download and create a bootable disk to do a clean install, without haveing disks.

harry350 wrote:
I don't have the original system disks, and according to the GEnious at Apple story in Manhassat Long Isand I need to do a clean install to fix certain issues including the error i keep getting when I try to update software.
Can I download and create a bootable disk
no.
to do a clean install, without haveing disks.
you can call apple and they'll send you replacement disks for the original install disks that came with the computer for a nominal fee.

Contact info to reset activation for old version of Dreamweaver CS3. I deactivated old installation from another system and installed on new system but will not launch to allow reactivation.

Does phone support exist? Customer service? The airspeed velocity of an un-laiden Swallow?

Thanks everybody… I killed the process again in Task manager after trying compatibility modes… noticed something glaring at me as I killed the process. 32 bit. Old workstation on Win7 that was working was 32 bit and the Win8.1 is (drumroll please) 64 bit. MY guess is that if Adobe killed the ability for this to run it would have failed upon an attempt to activate, not upon launch. I think Nancy might have hit it on the head. Let me stew on this for a bit if I really want to pay more for features I already paid for once.
Mark J Laurence, MCSE, CET
Electrical Designer / Network Administrator
Marquess & Associates, Inc

Print module issues

Hi,
for me there are three issues that are missing / should be improved with the print module:
The sharpening quality and setting options are still behind i.e. Qimage. Having in mind what Qimage is costing, it should be fairly ease for Adobe to reach the better Qimage output sharpening quality.
Soft proofing is still missing and should be added in the next major release at the latest.
There should be something like a loop view for the print layout screen. When using large format printer formats the rulers become extremely small that an exact positioning is almost impossible.
Looking forward to these, in the given priority.
Thomas

G_Lat wrote:
The print resolution is no longer displayed making it difficult to decide if I need to modify the resolution prior to printing.
Why would you modify the resolution? One of the huge advantages of Lightroom is that you don't have to do things like this anymore. You simply choose the output resolution in the Print Job panel and Lightroom takes care of the rest. How (and why) exactly are modifying resolution?
As to your second question, I am getting a print preview when I turn it on in the printer driver. Although I would never use it, it is working here.
It might help to submit some system info and some printer info:

Why has print module stopped functioning

I have lightroom 4, running on mac book pro OS 10.2 (maverick). When I go from the images in the library to the print module, the pictures darken and cannot be accessed. The preview is a blank page. I even tried downloading a trial version of lightroom 5, but that did not fix the problem

Might be a corrupted Finder preference file.
Go to HD > Library > Users (your name) > Preferences
Move the com.apple.finder.plist file from the Preferences folder to the Trash.
Restart your Mac. A new .plist file will be re generated for you after restart.

Lightroom 3.3 print module crashing

I have tried trouble shooting this problem, but can't find a fix.
I am running Lightroom 3.3 on an iMac and it has been running fine. But a couple if issues have started lately. The most troubling is that when I attempt to print using the print module, the processing begins and then Lightroom shuts down.
I have done both a restart and cold boot of the computer. I have downloaded a fresh copy of Lightroom 3.3, deleted the old copy and reinstalled the program. None of those routiner solutions worked. I thought perhaps the catalog had suddenly become corrupt, so I did a backup with integrity check and it did not show a problem. I also tried opening a different catalog and the previous backup of the current catalog, the problem continues to happen. I generally print with Lightroom managing the printer with a professionally written custom profile. This was all working fine the day before yesterday. So I tried changing the profile and using the generic Canon profile, just in case the profile had been corrupted. I also tried printing with the printer managing the printing. This worked once but crashed when I tried it again.
The crash report says this is an "Exception Type: EXC_BAD_ACCESS (SIGSEGV), Exception Codes: 0x000000000000000d, 0x0000000000000000
Crashed Thread: 26.
Thread 26 looks like this:
Thread 26 Crashed:
0   ...ple.ApplicationServices.ATS    0x00007fff84ef4529 _eOFAStreamPSDownload + 685
1   ???                               0xff70517820000000 0 + -40442820271538176
Thread 26 crashed with X86 Thread State (64-bit):
rax: 0x6f006f007400007f rbx: 0x000000010cf95c28 rcx: 0x000000011e8f72b0 rdx: 0x0000000000000000
rdi: 0x000000010cf94c9c rsi: 0x00007fff84ef07b0 rbp: 0x000000010cf95cb0 rsp: 0x000000010cf94b70
   r8: 0x000000011e8ff80b   r9: 0x0000000000000001 r10: 0x0000000000000708 r11: 0x000000010cf95c60
r12: 0x0000000000000005 r13: 0x0000000000000005 r14: 0x0000000000000011 r15: 0x0000000000000000
rip: 0x00007fff84ef4529 rfl: 0x0000000000010246 cr2: 0x00000000b0185c58
I would appreciate any help or suggestions as to how to fix this.
BTW, another problem I've had recently involves going from Lightroom to Photoshop. When in develop mode, when I right click to open an image in Photoshop CS5, instead of opening the image Photoshop brings up a dialogue box that is looking for an image already on my hard drive that I would want to open. My workaround has been that if I go to the "Photo" menu dropdown "edit with" and select it, then Photoshop will open the image. I am guessing that these problems are not connected, but I mention it just incase it sheds light on whan the problem might be.
Thanks in advance.
zac

I'm sure you've worked this out by now. But I just ran into the same problem and the only thing that resolved the issue was removing all printers from my system preferences and readding them.

Difference between upgrdae and migration about oracle database

Difference between upgrdae and migration about oracle database
please give the comments

Well, the question is almost philosophic... 
In 9i, there is a Migration Guide whereas in 10g there is a Upgrade Guide. 
Furthermore, in 9i, there is the command line startup migrate whereas in 10g that's startup upgrade.
Somebody think upgrade when go to new release, and migration when go to new version. 
Others think upgrade when new version replace database in place, and migration when new version include a move of database. 
Another point of view is : upgrade is for technical, and migration for application/data. 
 
Well, after these explanations, your upgrade/migratation notion will not be more clear, but I think that is not very important, only a terminology game. The most important is to know what you need : new version or new release. 
 
Nicolas.

Changing partition size and migrating to Leopard

My iMac currently runs OS 10.9 and has boot camp installed, but I chose a Windows partition size that was too small (only a few GB, enough to install Windows XP). I am now want to increase the size of the Windows partition and to install Leopard. What is the best order for me to change the partition size and install the new system? If the disk needs to be wiped clean to do this, what is the best way to back up the existing data and then to reinstall it. Would I use migration assistant?

If your beta Boot Camp Assistant hasn't expired, you COULD do this before you upgrade to Leopard. If it has, you can play games with the date, or you can do this after you're on Leopard.
Either way, if your partition is FAT32 you can back it up using Disk Utility, according to other posts (see especially backup/clone discussions in the beta discussion forum); if it's NTFS, Winclone is probably the way to go. If it's a real small partition, though, you might just start over, or back up only what's "yours".
On either the beta or Leopard, you'd want to back up or clone the current Boot Camp partition, remove it using BCA, create the new larger partition using BCA, and then restore the contents.
None of this requires wiping the MAC OS disk, it DOES essentially wipe out the WINDOWS disk. I don't think Migration Assistant helps here, but certainly haven't tried that.
Doug

Not able to recreate virtual desktops after migrating to new server

Hello Everyone,
I need some help please,
I migrated our roles and VMs to new system,I basically joined the new servers to the existing failover cluster, installed all VDI roles and after moving all roles and VMs to the new servers, I removed the old servers from the cluster.
everything seems working fine except recreating the virtual desktops collection.
when I try to do so, I get this error message:
"The RD Connection Broker server does not have access to add the
virtual desktops to the Active Directory domain. Configure access by
using the Active Directory page of Deployment Properties."
I did some searches for this error and from AD Users and Computers tool -> security tab of root node (domain/OU) I gave full permission to the new server.
another strange thing, is that I no longer can modify the domain and OU setting when I click on
"Edit Deployment"
the fields are grayed and no longer editable.
please advise.
Thanks

Thanks -TP,
I got it to work , the first time I tried to create a new collection , the master vm export failed with permission errors, later on It passed. after that I dropped a collection and recreated the vms of the first collection.
it is not clear to me yet, why this happened and how it got fixed but for now it is working.
Thanks again.

Print Module confusion - settings, templates, and migration to new system.

Similar Messages

Maybe you are looking for