Print out of Inspection report and Certificates

Hi Gurus,
I want to take inspection reports and certificates printout.
Is there any standard transaction other than QGA3 and QC21
Please let me know
Thanks and Regards
Hari

Hello Hari,
You can take the certificates printout with QC21 or QC22 (as applicable). What information you are looking in inspection reports ? Then we can suggest the appropriate set of the reports
Cheers
Kaushik

Similar Messages

  • Error when print out SAP Crystal Report in SAP B1

    Dear all,
    I have encountered the following message when I tried to print out SAP Crystal Report at client pc:
    Could not load file or assembly 'CrystalDecision.Windows.Forms, Version = 12.0.2000.0, Culture=neutral, Publickey Token=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
    On the other hand, there's no error when I print out the SAP Crystal Report on server.
    Can anyone advice on the error message as above?
    Thanks alot.

    Hi All,
    I have SAP 2007 B,Visual Studio 2008 and Crystal report 2008 Add-on.  I am facing the same problem,
    "Could not load file or assembly 'CrystalDecision.Windows.form,Version=12.0.2000.0, Culture=neutral,Publickey Token =692fbea5521e1304' or one of its dependencies. The system can not find the file specified."
    I have uninstalled SAP B1 and Crystal report 2008. Still I am getting the same Error message. Kindly give me your suggestions.
    Regards,
    Tom.

  • Print Multiple copies of report, and resetting Page number for each copy.

    Dear frnds!
    i am using developer 6i reports i have a problem.
    i want to Print Multiple copies of report, and resetting Page number for each copy" that is 4 copies of an invoice is required
    1 - for user copy
    2- gate copy
    3- accounts office
    4- office copy
    any body please tell me the solution "i am using oracle 9i and developer 6i"
    Thanx
    Ibrar

    Hi,
    I was wondering if you were able to get your multiple copies working? Below is what I have so far, just trying to get it to work before changing the actual template.
    <?for-each-group@section:R5542520/Pick_Slips_Detail_Lines_S3;PickSlipNumber_ID260?>
    <?variable@incontext:G1;R5542520/Pick_Slips_Detail_Lines_S3;PickSlipNumber_ID260?>
    <?for-each@section:xdoxslt:foreach_number($_XDOCTX,1,3,1)?>
    HEADER
    PSN: <?$G1/Pick_Slip_Number_Display_ID54?>
    PSN Detail: <?$G1/PickSlipNumber_ID260?>
    Page 1 of 3
    <?start:body?>
    BODY
    <?$G1/LineNumber_ID6?>
    <?end body?>
    FOOTER
    <?end for-each?>
    <?end for-each-group?>
    XML:
    <R5542520>
    <Pick_Slips_Detail_Lines_S24>
    <Header_Custom_Section_S24>
    <Pick_Slip_Number_Display_ID54>123456</Pick_Slip_Number_Display_ID54>
    <PickSlipNumber_ID260>123456</PickSlipNumber_ID260>

  • How can I print out a daily, weekly and or monthly calendar?

    I am a busy person and find if I can print out my weekly calendar and have it nearby I can quickly plan my time better.
    Lorrene

    Assuminh your profile is correct that you are running OS X 10.5.8, you need the version of Pages from iWork 09.
    Try to find the CD for it on eBay
    Allan

  • My Epson photo 1280 will only print 1/2 of a page from a document in Pages program. First print was fine. Have printed out a Mac templet and printer does same thing. Cleaned heads, checked nozzels etc. Any ideas?

    My Epson photo 1280 will only print 1/2 of a page from a document in Pages program. First print was fine. Have printed out a Mac templet and printer does same thing. Cleaned heads, checked nozzels etc. Any ideas?

    Hello, I have exactly the same problem. I could have written the same text. And I have'nt found solutions. Except, perhaps, change this printer (and quit HP?).
    Any suggestions would be really much appreciated.
    Thank you for your possible responses.

  • Canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors

    canon pixma pro 9500 having problems with my print out. colors are glazed and missing colors
    i have prfiled the mac and printer wiht colormunki and uplodated the profile sucessfully
    i set the printer to correct icc profile
    print out comes out same with glazed colors and missing tones/colors
    however when i use the same printer on windows and with light room, following same icc profile, colormunki calibrated profile, the print our are excellent.
    i have also tried using printer manage profile using the Mac and Aperture and get same poor prints
    can  you please assist and thanks

    I've a Pro9000 and also use Colormunki successfully.
    When I use Colormunki, I calibrate both of my monitors and the printer/paper combination. Colormunki saves the generated profiles to the correct places -- I don't load or change any profiles after that as that would mess-up what the Colormunki had just done for me, and this would likely mess-up the prints.
    Though I double-check the settings in the print dialogue, the choice for the printer handling things is already grayed-out. Colorsync handles it all just fine.

  • Problem in Print Out of ALV report

    Dear All..
    I am trying to take print out of an ALV report. there are 36 columns in my report. when i try to take print out, warning appears which says system cannot print the last 277 columns of report.
    i have tried using different formats for printer like :
    Format                  Description
    X_PAPER                 ABAP/4 list: Default list formatting
    X_SPOOLERR          ABAP list: Spooler problem report
    ZX_65_284               65 Rows and 285 Columns
    X_65_255                ABAP/4 list: At least 65 rows with a maximum number of c
    X_65_200                ABAP list: at least 65 lines with 200 columns (not for a
    X_58_170                ABAP/4 list: At least 58 rows by 170 columns
    X_65_132                ABAP list: At least 65 rows by 132 columns
    X_90_120                ABAP list: At least 90 rows by 120 columns
    X_44_120                ABAP/4 list: At least 44 rows by 120 columns
    X_65_80                 ABAP/4 list: At least 65 rows by 80 columns
    but every time the same message appears even on A3 size paper..
    i am using REUSE_ALV_GRID_DISPLAY to display ALV.
    Please help to to take out prints(can be in condensed mode) so that all columns appear on the print out..

    HI sujeet,
    Thanks for ur response. i had already checked the printer settings.. i think there is no problem with this. Can u Please suggest something else. thanks
    Hiii jyojit..
    Thanks for reply. I had already checked the said check box in spool admin. but the problem still exists. Please suggest something to get rid of the problem.

  • Equipment master data print out with general data and characterstics

    Hi,
    I need to take print out of equipment masters with general data and characterstics for around 300 masters at a time. Could any
    body sugget me the best way to take print out
    Regards,
    Srinivas Kasina

    I think I have not asked my query properly.
    For Maintenance Order, each order print out will be taken separately as a print out by using some template. Do you want the equipment master print out in that manner?
    Else you want the details of general tab & characteristics tab as columns like equipment list report?
    I hope my question is clear now.

  • Print out put for miro and incomming excise invoice(j1iex)

    Hi guru's
    my client need print out for miro and incoming excise invoice.Plz help me in configuring them.
    thanks
    with regards

    hi,
    Do check the NACE transaction...
    Message schema is nothing but a program which will come into action whenever there will any need of output...
    So, check your message schema...Define the output type as per your requirement...
    Condition table consist of all those Fields which will be taken into consideration, whenever you trigger the message output...and those fields will be taken into consideration for the req. output...
    Access seq. will provide you the scequence in which the fields are be read and perform an output...
    At last printer determination is main, by which you'll print output...
    hope it helps..
    Regards
    Rahul.

  • Unable to print out at one time and in one file ALL of the individual Facebook Postings...I only get three (3) pages when printing...in prior versions of Firefox I could print do this but in this version I cannot: WHY?

    Three (3) Pages are:
    1) Page showing only the name and the remainder of the page blank;
    2) Page with only the most recent posts (last post on page cut off);
    3) Page with nothing on it.
    Mozilla Firefox is my preferred and primary browser, however, I went to Safari and was able to print out ALL of the Facebook Posts WITHOUT Photos/Thumbnails showing up....
    I would like Firefox to do what it used to and work for me!!!!

    Right click any tab and choose "Bookmark All Tabs".

  • Print PDF, 5 different reports and send pdf to 5 emails to different people

    Hey Forum experts.
    Here's my question.
    In Apex 3.0, I know that we can now print to pdf. Woohoo for that feature...
    Can we print to pdf 5 different reports.
    and then email those 5 different pdf outputs to 5 different emails?
    Can it be done?
    and then can it be done by having everything all called from one procedure or one method etc
    Does anyone have an example of this ?
    Thanks
    Colin Mackenzie

    Sending emails can be done using Oracle XML Publisher / BI Publisher. We use that product for rendering report regions and report queries, for any more advanced printing needs, you will need to use the product directly.

  • Master Child Print outs using JASPER REPORTS

    Hi,
    I am doing report using JASPER REPORTS
    The print out sheet is pre printed one.
    That one is Like
    MASTERS DETAILS(Half of the Papper)
    FIRST CHILD(HAVING MORE THAN ONE RECORD -- Half of the Remaining Half Paper)
    SECOND CHILD (MORE THAN 1 RECORD-- 1/4 of Remaining Papper)
    MASTER DETAILS--Last part of the Pre printed papper
    Hw can i print this one using Jasper details?
    Please give me some Guide lines
    Thank You,
    Suresh
    |
    |

    Hi,
    This forum is exclusively for discussions related to Sun Java Studio Creator. From the description you have given it appears to be related to Jasper reports. So please post your query in the appropriate forum.
    Thanks,
    RK.

  • How to print out document list items (and with all comments!)

    Hi all,
    I am wondering how to get a good printout of document lists.
    In a web application I have some document list items and the users are adding many comments in it, so that the document list item doenst show all in the initial view, but scroll buttons to navigate up and down.
    I was surprised to read that the standard print functionality doesnt support document items.
    http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/68ce8391886e47e10000000a422035/content.htm
    How can I print out a list of all document list items with all comments?
    Ist there a workaround?
    thanks in advance for sharing your experiences, br, Michael

    Thanks guys for trying to help me...
    Gabriel, I not wanna do "a lot of trix" to get this out of iCal when it should be solved by iCal (from my point of view).
    Dancing Brook, Yes I hope we will see that in the future. I am convinced that there is many of us out there who want to see that function in iCal, even if they not really missed it yet.
    I have already sent a request to iCal feedback (hope they noted). Maybe they will if we are many doing so...

  • Can i get a print out of a report output which has LINE-SIZE = 400?

    Hello everybody,
    I have a task where in the output of a report which has LINE-SIZE = 400 needs to be printed.
    can i get a printout out directly in LANDSCAPE or do i need to write some code to get to the result?
    Please do suggest me.
    Helpful answers will surely b rewarded.
    Thanx in advance,
    Sanghamitra.

    Thanx one and all for your quick and prompt replies.
    Now is there any other way of priniting a report of line-size 400 on a fairly large paper ,other than using smart forms.
    Please do suggest.
    Thanx in advance,
    Sanghamitra.

  • Printing out of crystal reports with Citrix

    For one of my costumers we use crystal reports to get information from exact.
    The exact environment and crystal reports environment are central hosted.
    User can use this application with Citrix and works fine. But when the what to print some documents the receive in Crystal Reports a error that the donu2019t have enough right to use this printer.
    When the print to the same printer in Exact, the donu2019t have any problems.
    The user connect to the server with Citrix program neighborhood and the have published apps, not a desktop.
    The printer driver is already installed on the Citrix server.

    I have tried with administrator credentials. And i receive exactly the same error as the users.
    The error masage is;
    Can't not start the print job, check the printer connection
    I hope that someone can help

Maybe you are looking for