Re install a subscriber Call manager Version 7.1.5.30000-1

Hi all
we have a problem concern database replication between the publisher and the subscriber so we shutdown the subscriber and NOW
We need to re install a subscriber
- Do we have to take a backup from the old one and if we restore it does it makes database conflict
- Do we need to have answer file generated
- If we do not have a CD of the same version of the publisher what should we do
- Do we have to re install the license on the subscriber
Thanks

Hi Heba,
Although everyone has answered the question, I thought to refer to your points as well:
- Do we have to take a backup from the old one and if we restore it does it makes database conflict
- No, you dont need a DR Restore to restore a Sub.
- Do we need to have answer file generated
- No, you can install the Sub manually (ie respond to all the questions live during the isntall)
- If we do not have a CD of the same version of the publisher what should we do
- You MUST get one, if you dont have one handy, I will raise a TAC SR and request them to release it to you.
- Do we have to re install the license on the subscriber
- No, I believe all the Lic are installed on the Pub, and once the Sub has come online, you can verify that if the system needs any Node Lic. Just in case if you need anyway, request a new Lic from TAC, they should be able to issue you a Node Lic
HTH
Regards

Similar Messages

CDR FIles in Call Manager version 7.1.5-30000

Good Morning:
I have a cluster of servers Cisco Call Manager version 7.1.5.30000; 01 Publisher and 02 subscriber. The publisher server passes CDR files to a call accounting application PC-SYSTEL on another server. At one point the CDR files are no longer spend the Call Manager to the application PC-SYSTEL
Call manager services are reviewed, the part of CDR Management in Cisco Unified Serviciability right. The only solution is doing a RESTART to PUBLISHER server, and then again go CDR files to the application PC-SYSTEL
Please anyone has any solution other than to give a RESTART PUBLISHER server, or is this the only way to restore this service.
Expect your news.
Thanks in advance for any ideas.
Regards.
Fernando.

Hi Fernando,
Please check the following.
(1) Confirm that the billing server is configured correctly (verify the IP address). From the Cisco Unified Serviceability page, navigate to Tools > CDR Management to view the billing server parameters.
(2) Check if you can ping the billing server from the Publisher. From the Publisher CLI, you can use the following command:
utils network ping a.b.c.d
where a.b.c.d is the IP address of the billing server
(3) Check if the FTP (or SFTP) service/software running on the billing server.
(4) Check if the billing server is running out of disk-space.
(5) Check if the CDR Respository Manager service is running on the Publisher. If not, start the CDR Repository Manager service.
(6) On the Publisher, check the 'preserve' and 'destinationX' (X can be 1, 2 or 3) directories for CDR flat files. For example: if transfer of CDR files to billing server is broken from Jan 6th, then use the following commands:
file list activelog /cm/cdr_repository/preserve/20110106
file list activelog /cm/cdr_repository/destination1/20110106
(if multiple billing servers are configuration, the location will be similar to above, but the corresponding directories will be named destination2, destination3). This location contains symbolic links to files under preserve. CDR Repository Manager service uses these soft-links to determine what files need to be transfered to billing server.
If you don't observe files in either the 'preserve' or the 'destinationX' locations for the specific date, then it means that problem does not reside on the Publisher. Either the CDR records were not generated by the server that handled the call or it could mean that CDR Agent service on that server could not transfer flat files to the Publisher. Was the 'CDR Enabled Flag is enabled in CallManager service' enabled on that particular date ? Is the CDR Agent service running on the node that handled the call ?
If you observe files in the 'preserve' directory for the specific date, try restarting the CDR Repository Manager service on the Publisher. If the file transfer to the billing server does not commence, then set the trace level for the CDR Repository Manager service to Debug, wait 10 minutes, download CDR Repository Manager logs via RTMT and engage Cisco-TAC for further troubleshooting.
HTH
Manish

Cisco call manager version

hello,
how can i know the version of cisco call manager of my system UC520? thanks

Again as mentioned in other threads: thatis Call manager Express.
Not Call manger.
To check, you do "show telephony".

E1 no voice on Cisco Call Manager version 6

Hello,
We are running Cisco Call Manager with MGCP and E1 connection to a Siemens PSTN
We have started experiencing no voice when calling to Siemens or calling from Siemens to Cisco. The call goes through but there is no ring tone and no voice when the call is answered.
Also, I noticed that MGCP fails back to our Sub sometime, but I am not sure if these issues are somehow related
How can I troubleshoot voice problems with E1?
Thank you

Hi fgasimzade,
Can you check with Siemen what channel order do they follow.
Cisco VG follows descending order for outbound calls and expect ascending for incoming calls.
You can toggle config using below commands
interface SerialX/Y/Z:15
isdn bchan-number-order {ascending | descending}.
HTH,
Regards,
Mohammed Noor

Upgrading call manager from version 8 to 9

Hi All
Can anyone please tell me the summary steps on what I need to do to go from call manager version 8 to version 9?
many thanks
Carl

The answer to your question, is that they entirely depend on you exact CUCM versions, asking here and just saying "8 "does not work. You will need to do your due diligence, and read:
A) Upgrade guide for your target version
B) Release Notes
C) New and changed doc, if not included in the RNs already
They will provide you with ALL you need to perform the upgrade, pre-reqs, procedure, and post-upgrade changes to the VM. All the information is available on cisco.com under the CUCM main documentation site.
Once you've been thru those, you can come back with any further questions.

Change of call manager, if I change a call manager I need to bought the migration license?

hello;
I client want to change the box of the call manager, my question it's I need to bought the migration license to?

Hi,
What I understand that you are changing the hardware of Call Manager and same Call manager version would be installed on new H/w?
If that is the case, u do not require any migration license.You just need to get the license rehosted by writing mail to [email protected]
regds,
aman

Multiple IPs in Call Manager

Hi,
We need to configure multiple IP addresses in a Call Manager version 8. Our customer has three diferent IP networks: One for management, one for signaling and one for media. Call Manager is connected to those networks using three NICs with different IP Addresses a should separate traffic.
Is it possible in CCM? I guess no, but is there any work around to get this functionality?
Thanks and best regards.
Raul

Not possible in CallManager, but you can achieve this with "VRF select" on IOS routers
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srb2mvrf.html

Cisco Call Manager replication issue

Hello
We are running a cluster of 3 servers with Cisco Call Manager version 6
I have noticed that the replication status is 3 on all servers and from the CM Database Status I can see queue of updates are stuck
I have restarted Pub and one Sub but the status is still 3 and queue status is still the same
Is there anything I can do to make it work?
Thank you

Thank you,
I will try them tomorrow, but I thought restarting the servers will also reset the replication
Btw, there was a time difference on the servers due to NTP failure and I have just noticed that Pub can not see one of the Subs, the replication status is 0 and
g_cucs01_ccm6_1_2_1000_13 2 Active Connected 0 Sep 15 10:21:37
g_cucs02_ccm6_1_2_1000_13 11 Active Connected 0 Sep 15 10:35:19
g_cucs03_ccm6_1_2_1000_13 19 Active Dropped 92939 Aug 20 07:51:14
g_cucs08_ccm6_1_2_1000_13 18 Active Local 0

IPCC and CVP in VMWare, same as Call Manager

Hi All;
As I know that new version of Cisco Call Manager (version 8) is working based on VMWare (and it is must), so I am asking if there is a versions for IPCC and CVP working on VMWare (this for production and not for LAB).
Appreciate kindly help and support.
Regards
Bilal

UCCE 8 on VMware 4.0 on the Cisco UCS hardware only.
But in a lab environment, many (most) of us are using VMware in some shape or form.
I have 5 x HP DL380G5 2 CPU servers each with 6GB in a rack running ESX 3.5, with a smaller server for the Virtual Center software. Each ESX host can support 7 virtual machines - DC, Rogger, AW/HDS, PG, CVP7, CUCM and CUPS. You do need a lot of disc space though - especially CUPS (80GB) and CUCM (40GB). And you need a lot of extra space for snapshots.
Regards,
Geoff

Reset Security Password Call Manager 7.x

Hello,
I need insert a Subscriber Call Manager in a node with a Publisher, but I don´t know the Security Password in the node Publisher.
How can I reset or recover this password?
Tks
Manoel Dias

Resetting Administrator and Security Passwords
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/cucos/7_1_2/cucos/iptpch2.html#wp1044244
EDIT: Brandon you beat me while i was looking for the link. =)
HTH
java
If this helps, please rate
www.cisco.com/go/pdihelpdesk

VZAccess Manager version 7.2

I have a Verizon MiFi mobile hotspot device. Will Apple allow me to install Verizon's Access Manager version 7.2 software on my iPad to get access to Verizon Wi-Fi hotspots when I don't have the mobile device with me. The software will allow me to conect to Verizon hotspots in my area when my wife takes the MiFi to work.

Not if its not already in the iTunes store - only applications in the store can be installed on a iPad.

I installed Elements 12 because my version of Photoshop (CS5.1) is not compatible with Yosemite. Now the Adobe Application Manager will not search for updates for any of the programs in CS5.5 that I have. How do I fix this?

I installed Elements 12 because my version of Photoshop (CS5.1) is not compatible with Yosemite. Now the Adobe Application Manager will not search for updates for any of the programs in CS5.5 that I have. How do I fix this?

'''Except 8.0.x version also supported version is 3.6.24 '''you can find it here:
http://www.mozilla.org/en-US/firefox/all-older.html
check the system requirements:
http://www.mozilla.org/en-US/firefox/3.6.24/system-requirements/
see also:
[https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox Installing a previous version of Firefox]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

HT3486 My Airport 6.1 can't manage my base station. I need to use AirPort Utility 5.6 but i can't find the right. I've download several but it always give me the same message: Airport uti....can't be installed... The version of OS X on this version is not

My Airport 6.1 can't manage my base station. I need to use AirPort Utility 5.6 but i can't find the right download. I've been downloading several but it always after havingf instal the first 3 steps the same message: Airport utility....can't be installed... The version of OS X on this version
doesn't support this base station...
I need help please to find the correcte download so i can my wii-fii work as soon as possible (because my wife is making me crazy, she can't go on Facebook!!!! )
Thank's for your help,
Mike

Use AirPort Utility 5.6 which contains the features you need. It is compatible with Lion as well as Mountain Lion, however, the installer app will refuse to install it on Mountain Lion.
This dilemma is easily solved though. You simply need to extract the app from the installer package using a package extractor like Pacifist.
Download Pacifist here: http://www.charlessoft.com/
Download AirPort Utility 5.6 here: http://support.apple.com/kb/DL1482
If you happen to have an archived copy of the AU 5.6 app somewhere, such as a Time Machine backup or equivalent, you can simply restore it or drag the app to your Mountain Lion system's Utilities folder. It will run without complaint. It is only the package installer that is the problem.
Mountain Lion will not allow you to delete its existing version of AirPort Utility. Just ignore it. It and the older version (which will bear the unique name "AirPort Utility 5.6") can peacefully coexist.
Note: For those with Leopard or Snow Leopard systems you need AirPort Utility 5.6.1 (this is confusing - a later AirPort Utility version for an earlier OS X version - but it is correct).
Download AirPort Utility 5.6.1 here: http://support.apple.com/kb/DL1536

What versions of Call Manager support the new VG3XX Voice Gateways?

What versions of Call Manager support the new VG3XX Voice Gateways?

http://www.cisco.com/c/en/us/td/docs/routers/access/vg350/software/configuration/guide/vg350_scg/scgapp_platforms_ORIG.html#64565

I've had creative cloud installed and subscribed for more than a year. Recently I started getting problems and couldn't launch PS. This evening while trying to fix the problem I've managed to do something and now I can't launch either LR or PS. I get an e

I've had creative cloud installed and subscribed for more than a year. Recently I started getting problems and couldn't launch PS. This evening while trying to fix the problem I've managed to do something and now I can't launch either LR or PS. I get an error message about verifying my subscription when I click and get my subscription verified it ays "OK" and I clock to to application and then it jumps back to verification needed - and so it goes on and on and on and..

Here are two other examples of this happening..
I expected more from Apple.
https://discussions.apple.com/thread/6919109
https://discussions.apple.com/thread/6683814

Re install a subscriber Call manager Version 7.1.5.30000-1

Similar Messages

Maybe you are looking for