Print page with complete table

When I print my page I only see the first 25 rows of the table. 25 is The RangeSize of the itterator. Is it possible to change the RangeSize only for a printable page or is there another way to print all the rows of the table?
Joost

I tried all the suggestions above but it wasn't succesfully.
My table has at this moment 31 rows. The strange thing is that setting the rangeSize=-1 doesn't affect the results at all. When I push the print button I still see the '1-25 of 31 rows'
When I change it to 50 it shows all the rows.
Also the option with the 'Last operation' doesn't affect the results.
I use the follwing button code:
<af:commandButton text="Print" id="cb1" actionListener="#{bindings.Last.execute}" partialTriggers="t1">
<af:showPrintablePageBehavior/>
</af:commandButton>
I can of course set the rangeSize to 1000 so it will always work.
Joost

Similar Messages

After a network interruption, my photosmart 7510 prints pages with a "d" on them.

After a network interruption, my Photosmart 7510 prints pages with a "d" on them. I have Windows 7. There is no error message on my computer. When I check "See What's Printing," nothing is shown.

Hi rosegirlmom,
Does this only happen when the router is reset?
Why is the router getting reset?
Have you tired using a different router to see if this stops the issue?
Restore Network Defaults:
On the printer control panel, touch the Wireless icon ( ).
Touch Settings .
Touch and then slide your finger up on the display to scroll to Restore Network Defaults .
Touch Restore Network Defaults .
Touch Yes to confirm your selection.
Restart the printer, and then connect it back to your network.
You may need to run the Update IP address icon located in the HP folder in All Programs to update the computers with the new IP address assigned to the printer.
Let me know what happens?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Jspx page with ADF tables - complete reload

Probably a stupid question, but how is it possible to reload and update page and all the data in adf tables via button action.
I don't want PPR, just complete reload.

Hello,
Sorry for the late response.
I dont understand why you would want the table to be refreshed since the data you commit all came from this page so it should all still be valid.
But if you want to do this, just bind a button to the execute method of the parent table.
This forces the query to be re-executed and all childs should be refreshed automaticly.
In your pagedef just add the execute method as an action, the iterator should be the one of the parent application and then bind a button to this action.
-Anton

Netbeans dataprovider JSF page with data table

I have crated a database very similar to the one that is shown as an example on the Netbeans site tutorial Insert, Update, Delete. Except that the table doesnt have any linking dropdown list that controls the information displayed on the table. It connects to an oracle database. The table has 4 columns, all of which are editable text fields. THey participate in a virtual form with a save changes button i have. I also have an insert button on the page which adds an extra row to be populated. When a new row is created and saved I set a CREATER DATE AND CREATE USER field as well. Currently I have all of this working.
My issue is I need to add code to my savebutton action code so that it checks if any of the existing entries in the database, any of the fields were changed. And if so I need to set UPDATE DATE and UPDATE USER fields for the respective row. What I dont understand is how I check once the user hits the save button the submited changes against the values already in the database. Below is my save button code. (The TRANSFR_AGENTID code is to set the primary incrementing key for new entries).
public String savebtn_action() {
// TODO: Process the action. Return value is a navigation
// case name where null will return to the same page.
//Navigate through
try {
//if (trnsfr_agentDataProvider.getRowCount() > 0){
// trnsfr_agentDataProvider.cursorFirst();
CachedRowSetDataProvider maxTransID = getSessionBean1().getMaxTrnsfrAgentIDDataProvider();
maxTransID.refresh();
maxTransID.cursorFirst();
java.math.BigDecimal num1, num2;
java.math.BigDecimal newTransId = ((java.math.BigDecimal) maxTransID.getValue("MAXTRNSFR_AGENTID"));
System.out.println("###### newTransID = " + newTransId);
if (newTransId == null){
newTransId = new java.math.BigDecimal(1.0);
System.out.println("###### after null if comparison newTransID = " + newTransId);
num1 = new java.math.BigDecimal(1.0000);
num2 = new java.math.BigDecimal(-1.0000);
if (trnsfr_agentDataProvider.getRowCount() > 0) {
trnsfr_agentDataProvider.cursorFirst();
do {
if (trnsfr_agentDataProvider.getValue("TRNSFR_AGENT_ID").equals(new Double(0))) {
trnsfr_agentDataProvider.setValue("TRNSFR_AGENT_ID", (java.math.BigDecimal) newTransId);
newTransId = newTransId.add(num1);
} while (trnsfr_agentDataProvider.cursorNext());
trnsfr_agentDataProvider.commitChanges();
} catch (Exception ex) {
log("Error Description", ex);
error("Error :" + ex.getMessage());
return null;
}

http://www.oracle.com/technology/products/jdev/101/howtos/jsfdrilldown/index.html

SAP ME ADS Printing - Traveler with dynamic table

Does any one have an example traveler template that uses a dynamic table to display all the operations on the traveler? Ie one template that works for different routers.
The problem we are having is due to the xml tags for each operation being different eg <operation0>, <operation1> etc which the dynamic table in Livecycle Designer doesn't seem to like.
Thanks
Kevin

Hi Stuart,
We are using ME15 SP03.
We have already read that document cover to cover and we can print a traveler with SFC or Shop order header data etc. We can also print a fixed list of operations but what we want to do is have a single template that has a dynamic table that prints all the operations regardless of how many there are.
Paragraph 6.11 of the document tells you that if you have multiple operations the binding should end with .Router_Step_ID0 , .Router_Step_ID1, Router_Step_ID2 etc etc
This would mean that I would have to create a template for each different material that has a different number of router steps as you effectively hard code each step ID
The first system I ever worked on (Visiprise 4.2) had the capability of using one template that automatically shrunk / expand based on the number of operations but I just cant see how to do it in LiveCycle Maybe I'm missing the obvious.
Thanks
Kevin
PS. Great to see a fellow Scotsman on here

Printing pages with in rang of pages

Dear fellows is there any paramater which can specify that from which page number to which page number it should be printed at run time if we send report directly to printer if we do not show print job dialog box.
Thanking You,
Chandan

Actually u r right,
but the requirement is that user firs hve to specify this thing in forms
and whn i call the report,report shud print only those pages.
dstype=printer
so ... any idea regarding this
wht is do_key('print') n how can i use in my form or report as i hve mantion the senario of my form n report
Regards,
chandan

Print pages with digital signatures

My printer refuses to print any page that contains a digital signature. This is true of MS .doc as well as .pdf. Anybody know why?

Google is your friend.
You could also make your frame on a master page.

Html page with complete hyperlinked file index

I would like toe create a page that lists all the files on
the website as hyperlinks to those files.
If possible with thumbnails
If possible password protected.
Is this possible?

Not in HTML, no. You would need to use custom javascript, or
server-side
scripting to do this (assuming you wanted to do it
dynamically, i.e., make
it automatic).
One possible workaround would be to build a static page
(i.e., one that you
must update manually when new pages are added), by using -
http://home.snafu.de/tilman/xenulink.html
on your site. It acutally spiders the pages, and writes a
page like that
into the site report. You can just copy and paste (and
embellish) that
content into your page.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"MaeveParis" <[email protected]> wrote in
message
news:ef4cvu$qsj$[email protected]..
>
>
> I would like toe create a page that lists all the files
on the website as
> hyperlinks to those files.
>
> If possible with thumbnails
>
> If possible password protected.
>
> Is this possible?
>

How to print pages with specific content

I have a PDF fie of about 500 pages which contains the pay slip of staff of the entire establishment. I wish to print only the pages that are for the staff in my department who are 70 in number. Each page contains a staff ID number at the top. I have the staff number of the 70 staff in my department in a text file. Is there any way I can make Adobe Acrobat Reader print out only pages that have the staff ID I stored in the text document?

O.K. I also noticed that each page contains the name of the department a staff belongs to. Without using the custom-made script you mentioned, could I use either Acrobat or Reader to print only pages that contain my department's name?

"Print page" doesn't work as intended when using lengthy tables. (Brother MFC 6490CW, possibly others)

I had originally thought this was a printing driver problem, but further testing indicated that this was not a problem in Internet Explorer and it was a problem in Firefox.
When printing some web pages using Mozilla Firefox, particularly those having sizable tables which would extend beyond the length of a single printed page, the remainder of the table is not printed even though the remainder of the web page itself is printed. The behavior is also noted when using Print Preview. See, for example, this web page which I created: http://alltherightwaystowrite.blogspot.com/2013/08/the-basics-capitalization.html
I inquired of other bloggers to see if they were also experiencing this issue. See, for example, the discussion I began here: https://productforums.google.com/forum/#!msg/blogger/EpD6K2ezIZE/a5mPu8CV0HwJ
As you can see, the only response I received indicated it was not an issue for that person with a different printer. This leads me to believe the problem is with either the MFC6490CW printer (unlikely) or the MFC6490CW printer driver (more likely) or perhaps with Firefox, or some combination of those three. This problem is duplicatable by me on successive attempts to print with any web page with a table extending beyond the length of a single page of printed paper. The output error occurs whether printing in portrait or landscape mode.
Saving a web page as "Web Page Complete" and opening up the web page in Microsoft Word created a variety of formatting errors, but otherwise, the entire contents of the page would have printed. Of course, this is not an ideal solution in any event. The entire document should print seamlessly across multiple pages without losing any data or content in the process.
As indicated above, as an additional test, I attempted to print the same web page in Internet Explorer and did not note the output errors described here. The web page printed correctly under those conditions. As a result, I believe that the most likely culprit is Firefox since Internet Explorer was also a good test case for my printer and printer driver, and it passed that test case.

https://bugzilla.mozilla.org/show_bug.cgi?id=521204 - this is a META Bug which is tracking all the Bugs which are related to '''Wrong page splitting / Missing page content when printing''' - 34 different Bugs, 14 of which are marked as solved.
IMO, that page would be better served with a print css script ''(as jscher2000 mentioned earlier)'' to make that a "printer ready" page, if wanting that page to be "printable" is your intention. As it now is that page is shrunk by about 50% with the "Shrink to Fit" feature engaged. Look at that page in Print Preview when the Scale is set to 100% instead of Shrink to Fit, and see that the page is so large that it shows that about 1/2 the width. Then decrease the zoom level in Print Preview to 50 or 60% to get that page to fit horizontally with the "Shrink to Fit" feature disabled. Looks like a case of "garbage in - garbage out".
I think the css used for that page uses too large a font which ''(IMO)'' forces Firefox to shrink the font too much to make that page fit to a letter size sheet of paper. And relying first upon the Print to Fit feature in the four different major browser engines ''(Gecko, Trident, WebKit, and Presto)'' and then the hundreds of print drivers out there is just looking for failures such as you are seeing; it works for some viewers and doesn't work for other viewers. What appears on the '''"screen"''' doesn't always translate to the '''"printed page'''" too well without proper instructions via style sheets, especially since "screens" are oriented horizontally and most "printed" pages are vertically oriented unless the user shifts to the Portrait view.
http://www.w3.org/TR/CSS2/media.html#media-types <br />
http://www.w3.org/TR/CSS2/page.html

Pages 5.5 Tables Bug?

So I updated to Yosemite and upgraded iWork to the latest versions, which included Pages 5.5. Upon opening several different documents which I had saved in the previous version of Pages (5.2.2), I found that the tables in these documents were not displaying in the same way as they used to. The problem seemed to be that Pages 5.5 refuses to make a table that has too many rows for one page flow onto the next page. It simply moves the entire table to the next page.
I did a few tests with a new document created in Pages 5.5 with the following results:
1st Test: Created a new document, adding text to cover half of the first page, then inserted a table underneath. Increasing the number of rows to the point where the table no longer fits on page one causes the entire table to move to page 2.
2nd Test: With the same document as above, I increased the number of rows of the table until it could no longer fit on an entire page. Pages correctly flowed the table from page two to page three.
3rd Test: With the same document as above, I deleted the text and whitespace on page one. This forced the table back to page one, and Pages successfully flowed it to page two. But now, adding any text above the table on page one causes a bizarre result: the table moves down and the rows which flowed onto page two display correctly, but the first part of the table is entirely invisible. It isn't just a drawing problem, since zooming in and out does not help. See screenshot below (notice the row numbers are in the 30s, proving that this is the second part of the table).
4th Test: I saved the document to iCloud Drive and then reopened it. This results in absolutely nothing of the table being displayed, not even the second half. I have not figured out any way to make the table display itself. Opening this document on an iPad, Pages shows me the text on the first page, with the table flowing from page two to page three.
Anyone else noticing similar difficulties? I have documents that I had created in native Pages 5.2.2 format that were able to flow a table from one page to the next, so this looks a lot like a bug introduced by the 5.5 update.
Sincerely,
Alexander Dominic

I think i found the reason for this behavior.
The tables are fine. It depends on a layout option that seems to be activated by default. In the inspector-panel is a "more…" There you can select the option "Avoid lonely lines" (dunno english term) When the section with the table is selected and you uncheck this feature everything is as expected.
Apple should change the defaults
See the screenshots attached.
Regards,
AW

Sun java Creator, Table component vanishes when associating with the table

I am trying to develop JSF page with a table component and associating a table (users) to the table component.
I have created datasource and i can see the data in the SQL editor in Sun Java Creator.
But when i try to associate the table component with the table(users).
I table component vanishes.
I dont understand what is the problem.
Can anybody help me.

The default theme is localized. If you look at <Creator-install>/rave2.0/modules/ext/locale
you should see the localized default theme jars. Not sure which locale you are. You can put your localized jar here. Add the localized jar to your web application via library manager for it to be included in the deployed war file
- Winston
http://blogs.sun.com/winston

Alternating Printed Page then Blank Page, Deskjet 950C

MY Deskjet 950C suddenly decided to start alternating printed pages with blank pages, when printing any amount of pages or copies (blank comes second).
Operating this on Vista, connected via USB using the Vista driver (since HP doesn't offer Vista driver for older printer), the one that gives printer name as "Deskjet 950C/952C/959C".
I'm using Letter size paper, have tried all Paper Source settings (Auto, Upper Tray, Manual) and have set Scale To Paper Size to both Letter and No Scaling. Have tried Print Page: 1 and Print Current Page, still prints a blank after the printed page.
I use this as a 'workhorse" printer for bulk jobs. My HP C7250 All-In-One is working perfectly normal.
I've run out of ideas, and it's a pain to keep taking out those blanks.
Any ideas anyone?

Ok, strangely enough it stopped.
I went in to Media (paper Type) and changed it to HP Brightwhite Inkjet paper, then changed it back to Plain Paper, and it's not doing it anymore.
Strange. Very Strange.

Blank Printed Pages

I have used free versions of reader for sometime to open and print pdf files sent to me. Suddenly I get blank pages - apart from headers and footers. Same in Print preview - I would be really greatful id anyone has any suggestions.
Thanks

I unfortunately am experiencing the same blank printed pages, with only top and bottom headers showing up. Print view same. Likewise, I am user of free reader only. My attempts to download updated version of adobe reader fails; no longer an option for my antiquated windows 98 o.s.

Issues with Advance Table Add Row New Row not work in some scenarios.

Hi,
Wondering if there's any issue with Advanced Tables where it does not create any rows. I don't know if anyone tried this or not. I have one OA Page with Advanced Table and a button that when clicked open a new OA Page in a POP-UP Window. The pop-up page conatins one textbox where u enter a data and this gets saved in one of the VO's transient attribute. Now on the ase page if you don't click a button to open a pop-up page you can Add New Rows in the Advanced Table by clicking Add Row Button. But as soon as you open a popup window and close it Add New Rows button doesn't work and is not creating any new rows. Basically page stops working. Both the POP-UP and the base page share the same AM but have different controllers.
POP-UP page is a custom page that I open giving the Destination URI value in the button item and target frame _blank.
I even tried creating rows programmatically for Advance Table but this too doesn't work once u open a pop-up. Also I have used pageContext.putTransactionValue in the pop-up page and am checking and removing this in the base page.
Any help is appreciated.
Thanks

anyone

Print page with complete table

Similar Messages

Maybe you are looking for