Print preview not showing values correctly. (single words are omitted)

Hi,
When viewing print preview of ME23n , it does not shows the values correctly.
It omitting the single words.
If its having 2 or more words, it displaying correctly
For example;
This is the vendor & its address.  (check attached image img1.jpg)
ZERANDIB BUSINESS APPLIANCES
Number-122/A
PO BOX 41,112,REID AVENUE
COLOMBO-04
When displaying the print preview, it shows only some parts of the above address
Shows only; (check attached image img2.jpg)
ZERANDIB BUSINESS APPLIANCES
PO BOX 41,112,REID AVENUE
These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
In the above example, it is not showing Number-122/A and  COLOMBO-04 (Its a single word. No spaces there)
If its like --> Number - 122/A   &  COLOMBO - 04 ,  then it will display in the print preview correctly (where there are spaces after - mark)
check img3.jpg
If its having more than one word, then it will display correctly in the print preview.  As below;
ZERANDIB BUSINESS APPLIANCES
Number - 122/A
PO BOX 41,112,REID AVENUE
COLOMBO - 04
Any ideas how to resolve this issue?
Is there any thing to do with printer settings & configurations / netweaver admin point of view?
Best Regards.
Zerandib

Hi Zerandib,
By the way , since its a standard program, i think that code is out of our scope.
Me23N is a standard tcode but cusomters create Z-Program for printing by making a copy of standard.
You may please check upon the same.
Is it possible to check the results on a system where patch has not been applied ?
Regards,
Deepak Kori

Similar Messages

  • Preview not showing characters correctly

    I've noticed that the vast majority of the time, Preview doesn't properly render special or "foreign" characters. Up / down arrows to denote increases or decreases in items appear as black blocks, and Greek characters do something similar ("µg" renders as " g" with a black block or blank space where the µ should be.)
    The same exact PDF renders properly in Adobe Reader. But I don't much care for Reader.
    Anyone have any thoughts on this? I saw the same behavior on my previous OS X install.

    Greek characters and upward / downward arrows to denote an increase or decrease in something frequently render as a gradient "box" in Preview, but appear correctly elsewhere.
    There are often problems with that stuff because of different encodings used by different "symbol" fonts. Hopefully everyone will eventually use Unicode and these will go away.
    This is a bit of a problem considering that Preview >> Reader for PDFs on OS X, in my opinion.
    http://www.apple.com/feedback/macosx.html

  • Tree does not show node correctly but node are inserted well ?

    hi,
    i am haveing tree with
    1. Root node (grand parent (only one))
    2.Parent nodes(many nodes)
    3.child nodes(many nodes)
    i add child node in a particular parent node . this is done dynamically when socket thread found any any user .when socket listener thread found any user
    it add one user node (child node) in one of parent node
    when add child node some time tree view like this
    root
    |_ parent1
    |    |_ child1
    |    |_ child2
    |_ parent2  
    |    |_ child1
    |    |
    |    |
    |    |_child2
    |_ parent3
         |_child1
         _child2please have a look in parent 2 and parent 3. in parent 2 node just long gap
    between child nodes. But parent3 there is no line between childs.
    when a thread found an user on network , to add an node in tree i use
    treeModel.insertNodeInto(node, treenode, index);
            expandSelectedNode();But, this is generally happend when a node added by socket thread. So this i changed this section of code into EventQueu.invokeLater(); to do add by event queue thread. But it still come like this

    EventQueu.invokeLater();From where do you call this?
    We may need to see a small example code that can reproduce the problem.

  • Iphoto preview not showing corrections with Yosemite

    I created a new iPhoto file for 2015 and when I make adjustments to some of the photos with an outside editor (PhotoShop), the preview image does not show the corrections after making the changes. This has always worked before.
    If I click to open the preview image after changes were made, the image shows with the corrections made but the menu under photos does not have the "revert to original" active and is grayed out, even though there have been changes. Yet, if I check the package contents of the 2015 iPhoto file to check the contents for the new pictures, the changed photos are shown under previews and  the originals are shown in masters.
    Since I got the iPhone, I had not used my digital camera since a June 2014 vacation. The preview corrections will always show if it is an iPhone picture but will not show the corrections if it is from my digital camera. If I export the camera photos  with Image Capture to another folder not associated with iPhoto, then import the the pictures into iPhoto using the Import function, corrections will be saved and the preview will change to show the corrections (as previously). The picture also shows the revert to original option as available.
    I had not used the camera since I upgraded to Yosemite so I went back to experiment in Mavericks which is on another drive and imported a test picture from the camera into iPhoto, made extreme changes to make it easier to see in the preview, and saved. The preview showed the corrections and iPhoto behaved as expected. I imported the same picture into Yosemite from the camera into iPhoto, made new radical changes and the preview did not change, no revert available, or the changes saved. Import in both instances was using the same picture on the same SDHC card in an external card reader.
    These experiments seem to show that the problem is not my pictures or the card, but it a problem with iPhoto importing digital camera pictures under Yosemite. Since the iPhone imports directly and not through a reader, can it be that iPhoto under Yosemite has a problem communicating with the reader that does still work under Mavericks?
    I know how to avoid the problem by this two step importing, although it will not break the photos into the auto-split of the events to individual days as would be if directly imported, but as one cluster of multiple day photos - a problem since I sort by date under View. The splitting by days is important for me. I do not want to sort trip pictures into individual days before importing as I might have as many as 1,000 photos in a single trip!
    Is there a solution?

    Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
    1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
    2 - double click on the thumbnail in iPhoto to open it in Photoshop.  When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
    3 - however, if you get the navigation window
    that indicates that  PS wants to save it as a PS formatted file.  You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
    This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
    With Photoshop Elements  the Saving File preferences should be configured as shown:
    I also suggest the Maximize PSD File Compatabilty be set to Always.  In PSE’s General preference pane set the Color Picker to Apple as shown:
    Screenshots are from PSE 10
    Note 1:  to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
    Note 2:  editing a RAW file with either PSE or PS creates a new file which must be saved outside of iPhoto, i.e. the Desktop, and imported as a new photo into the iPhoto Library.

  • GRPO print preview not coming it shows internel error

    Dear Experts!.
                        While i am viewing my end user system in the GRPO template print preview not coming, eventhough the default system template also i am trying it shows internel error  so anyone suggest me
    It is very urget
    Regards
    Selva.D

    Hai jeyakandan,
                    While  print preview  the system template the error message shows
    "internal error occured " .
                                     This is a  system template . And My GRPO template also i can't get preview  that also shows the same error.
      Eventhough  The System  configured with the printer,so  i can able to take print from other marketing document like purchase and sales order documents in both system template and My Designed template.

  • Date difference is not showing the correct result for date interval

    Hi Expert,
                    I've created two formula variable one for PO date and another for GR date
    while i am taking the date difference of GR and PO date for single PO date selection
    it showing me correct result , but while i am taking the date interval for PO date it not
    showing the correct result.
    eg: PO date: 01.01.2010   for a particular PO and Gr date is suppose 03.01.2010, 06.01.2010
          it showing the result 2 and 5.
    But if i am taking date interval for PO date:
    eg: 01.01.2010 - 31.01.2010
    PO date: 10.01.2010 and GR date are suppose 15.01.2010, 22.01.2010 and 30.01.2010
    it showing me 14, 21 and 29
    Thanks and Regards
    Lalit Kumar

    Hi Expert,
                    Through replacement path.
    Thanks and Regards
    Lalit Kumar

  • My storage is not showing the correct space

    Hi,
    Why my storage is not showing the correct amount of space? I have MBA mid 2013 with 121gb. However my storage show a different value than its suppose to be especially on the apps. I google the problem, mostly its because of the time machine but I never use the time machine. and some of my friend tells its probably a junk. is the third party apps like apps cleaner and clean my mac is helpful? I attached the screen capture of my storage. As you can see the value of apps is 162gb in fact my flash is only 121gb. its doesn't make any sense. Please help.

    Do not use third party apps such as CleanMyMac on your Mac. They have no effect what so ever on storage space. Your Mac runs maintenance in the background for you >  Mac OS X: About background maintenance tasks
    Reindex Spotlight then check the storage >   Spotlight: How to re-index folders or volumes

  • How can I get my print preview to show accurately?

    My print preview keeps showing the document at approx. 130% of the actual document size.  No scaling or tiling are on. Prints fine from another computer. Document size and media size are both letter size, but shows only part of the artwork. Tried uninstalling and reinstalling IllustratorCC.

    I started having this same problem starting back in  Illustrator CC version 2014.1.0 18.1.0 (64 bit) and is still happening in the latest update 2014.1.1 18.1.0 (64 bit)
    It has not been fixed even though there was a hopeful moment in the following forum thread that said it would be fixed in: https://forums.adobe.com/thread/1611890

  • Newly added printer is not showing up in printer list in Acrobat 11.0.3

    Hello,
    We are using Acrobat Pro 11.0.3. We recently added a new printer and that printer does not show up for one user of the machine in Acrobat. It shows up in other applications and under Printers. Other users who log into the machine can see the printer in Acrobat. I have uninstalled Acrobat, rebooted, reinstalled. I have also removed referenced to Adobe under HKEY_CURRENT_USER as well as APPDATA to no avail. Any suggestions would be greatly appreciated.
    --mitch

    I have the same problem. Have you found any solution to this issue?

  • The only working print-related function in BioBench1.2 on my PC is the "Print Report", all the other "Print" functions gave me "Error, the printer is not set up correctly".

    I used to print all my BioBench data by first exporting them to Excel and then print from there. Recently I need to print some of the screen shots and some data directly from array analysis, but when I click on the "print" buttons, the "Error, the printer is not set up correctly" message occurs. The only thing I can print from BB without this error is the report printing function. I have a postcript printer and I have set the postscript option to be "true"... Thanks !

    This problem is a result of a limitation in Windows 9x regarding the size of an image that you can send to the printer. The problem does not occur on Windows 2000/NT. This problem appeared with the increased color options of LabVIEW 6.0 on which the BB1.2 is based.Although it is not immediately obvious, your video driver and settings play a role in printing.
    1. Try adjusting the color palette your driver uses (i.e., 256 color, high olor, true color). The error may occur only in one of these modes. Also, change the resolution (number of pixels) to represent the Screen Area; e.g., change from a 1024 x 768 display to an 800 x 600 pixel display.
    2.Certain video drivers also support "acceleration" modes. Using a non-accelerated mode often eliminates the error. For
    Windows 95/98, right-click on your My Computer icon and select "Properties" from the pop-up
    menu. On the Performance tab, click the Graphics button and change the Hardware Acceleration (e.g., if it is set to "Full", lower the setting a notch or two); for Windows 2000/NT, right-click on your Desktop and select "Properties" from the pop-up menu. On the Settings tab, click the Advanced button and go to
    Troubleshooting.
    3.In Windows, the standard VGA driver provided by the operating system is very stable. Try using this driver in place of the specific one written for your video hardware. If the error is eliminated, there is likely a problem with your vendor-provided video driver.
    4.These errors are most often fixed with the latest
    video/printer driver. Be sure to contact your hardware manufacturer and install the latest driver. An easy way to determine if your error is "driver-related" is to move your code to another machine (and hopefully a different set of drivers) and see if th
    e error persists. If the problem is printer related, try another printer.
    5.Make sure there are at least 100M avalible space in your C: drive. If not, set the virtual memory to the other drive which has larger available space.

  • 5s finger print scaner not show on settings.

    i brought iphone 5s 3 month ago and finger print scanner was working perfect but suddenly my phone,s finger print scanner stopped working  and i restored my
    iphone 5s now finger print not show on security options,still i have apple  Repairs & Service Coverage: April 8, 2015 please guide me what i want to do ??????
    thanks
    regards ujitha (iphone 5s owner)

    is it possible that finger print scan not show in settings (security) i'm confused can you guess is this hardware or software problem..,i restored phone using iPhone6,2_7.1.2_11D257_Restore ,but it didn't work but before i restore it finger print scan setting show on settings but i couldn't scan my finger it says that operation fail try again latter but after restore i didn't get that error  massage also now i feel that i;m using iphone 5 which has 5s look,here i'll attach some pictures.,,

  • Oam does not show the correct configuration information

    Oracle apps,
    An issue with the oam.
    There are 2 nodes in our system. In 12
    One is for db and cm
    The other is for forms and apache.
    The system is running fine.
    But from the OAM, where it does not show the correct configuration info.
    From the OAM, all the services are (including db, cm, forms, apache) on one node.
    The issue might be caused by the fact that the web tier was cloned from the cm tier as a workaround for some patch errors in web tier.
    I even used the EXEC FND_CONC_CLONE.SETUP_CLEAN; to clean the system tables and ran
    Autocfg on all tiers. But it didn’t solve this issue.
    How can I fix this OAM problem to make it show the correct information?
    Thanks,
    Lily

    Thanks for reply.
    Yes, I did commit it.
    The hostname information is correct.
    On oam, this web node is there but all the service actually running on this node is
    showing under the cm node .
    <TIER_DB oa_var="s_isDB">NO</TIER_DB>
    <TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
    <TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
    <TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
    <TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
    <TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
    <TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
    <TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>

  • HP printer does not show up as part of the neighborhood in printer utility

    Hi Everybody -- I am trying to connect to a shared HP printer connected on my XP machine. It works fine when trying to connect to it from other pc's, however, when ever i try to connect to it from my MAC, the pc name and printer does not show up as part of the neighborhood in the printer setup utility (which is weird).
    I do have the drivers installed for that particular printer and it works fine with USB connection (HP6110). I know this is not a firewall issue becuase I tried connecting to the printer while disabling the firewall.
    Appreciate any help on this matter.

    Look over the printer sharing articles on iFelix Tech Notes.
    In addition, check the Mac's System Preferences> Sharing> Firewall tab> Advanced button and uncheck 'block unwanted UDP traffic' and "enable stealth mode". On the WinXP computer, go to Control Panels> Administrative Tools> Services and set 'Computer Browser' to manual from automatic.

  • HT4356 Up photos mart c7100 series wireless printer does not show up as a printer. Anyone found a fix for for use with ipad3?

    Up photos mart c7100 series wireless printer does not show up as a printer. Anyone found a fix for for use with ipad3?

    It sounds like the features are working through the USB connection rather than the wireless connection since it is still not seeing the networks.
    Everything points to a hardware failure since the steps provided through the private message did not work and the wireless test showed it had failed.  Sorry.
    You do have some options at this point.
    If it is under warranty, either standard or extended, you can contact HP support at 1-800-474-6836 to have it serviced under warranty.
    If it is out of warranty, you can still contact HP support to find out all the options and the cost of each option.  However, it is my opinion that this money would be better spend being applied towards a new printer. 
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Airport extreme usb printer does not show on macbook

    I have been trying to set-up a printer on a Airport Extreme through the USB cable.  However, the printer does not show under "Printers and Scanners" and the help on-line has not helped at all. 

    Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the  AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers. 
    To see if your printer is compatible, take a look at this iFelix Unofficial AirPort Printer Compatibility link. If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
    Also you can try this Apple Tech Support article to see if it will help: Printer troubleshooting for AirPort Base Stations and Time Capsule
    Finally, check out this IBM support article to see if your printer is listed as having a Postscript or PCL3 interface. If it does, then it will most likely work with the AirPort's USB port. Printers that use the "HP LIDIL" interface must be connected to a computer directly and will not work.

Maybe you are looking for