Print problems when moving locations

I bought 2 envy 114d printers. One is in NJ and the other in Fla.... when I try to print, they don't work unless I re-install the set-up CD Why are they not compatible

Hi,
i don´t think that thie Version is so full with bugs, i use it since 11 month, that way...
Some tricky Things there, thats right,
but what heres explained as Problems, i think that might not be patched away :-)
Lone

Similar Messages

  • Printing problem when PDF is sent to the printer with certain fonts - missing text

    I'm running into a printing problem when PDFs containing certain characters of the Calibri font are used.  The text in large sections of the PDF is missing on the paper version, but the text is there on the screen.  It's also happened when the PDFs we created were e-mailed out to a client and printed on their printer.  The problem is not present when printing directly from the programs (Microsoft Word, Excel, Visio, etc.).  I've been trying to get tech support from Adobe on this, but every time I call they apologize and say they will call back in 4-6 hours with an answer.  Same result each time, no call back.  If anyone from Adobe is listening, it's case number 184891587.  The font appears as an embedded subset when I look at the document properties.  Sometimes deleting one or two Characters allows for larger text blocks to be printed - i.e. removing a long dash in bold from the heading of a paragraph makes the paragraph reappear when printed to paper from PDF.  In all cases the PDF appears correct on the screen.  Printing as an image allows the text to appear, but the image quality isn't acceptable for small text, even at the 600 dpi setting on the printer.  If the PDF is sent out by e-mail, we do not have control over the end-user's printer setup anyway, so we need this to work in all cases.  
    The setup/process I'm using is as follows:
    Windows 7 Professional SP1 64-Bit
    Microsoft Office 2013 - problem is present when printing documents from Word, Excel or Visio.  Even other variations on documents. 
    I've tried Acrobat versions 11.0.0 to 11.0.5 as well as Acrobat Pro 11.0.0 and 11.0.1.  Same Result
    Printing to Adobe PDF as the printer, from the third party application
    Printing to a Xerox printer from PDF using Acrobat - Text missing
    Client prints to Konica printer - Text missing
    I print to the wide-format Ricoh (which also does 11x17) and the text is present. 
    Is there something I'm missing?  Is the entire font not getting embedded into the PDF file?  I noticed that rolling back to a much older version of the Calibri font (1.02 compared to 5.72) makes the problem mostly go away, but it's not completely gone.  Is it possible the font is too large to be completely embedded?  Where can I go from here? 

    Success!  At least for now.  It looks like my problem was fixed with Adobe's most recent update, 11.0.06.  From the release notes:
    PDF creation
    Added support for Lotus Notes 9.
    Added support for WebCapture in IE 11.
    Added support for conversions from AutoCAD 2013.
    3652540 A blank pdf is created for files having hidden visual style.
    3601108 Flow Chart converts as a multicolored square.
    3654345 Word documents missing parts of images in conversion to PDF.
    3654572 Temporary file size increases when creating pdf by combining multiple files into one PDF.
    3670155 PDF file created with Distiller XI prints incorrectly to some printers. (Emphasis mine)
    3599407 Checkbox check marks do not appear in these files.
    3663233 IE Web Capture in localized OS: Icons and drop-down menu items are missing and conversion dialog is not localized.
    3651931 Chrome Only: Few web pages when converted to pdf from Chrome plugin doesn’t show up the Save As dialog.
    3597910 EPM Mode On: Web capture is not working on Windows 8-32 bit when cache folder is missing.
    3610644 Firefox 23.0: With Firefox version 23.0 (latest), the WebCapture icon shows up very dim as if it is disabled.
    3650244 ODA falis to convert DWG files to PDF for large files.
    I don't know if that's definately what solved the problem, but it sure sounds similar and this is the update that made the printing problem go away.  We can't get the PDFs to fail at this point with our printers, even with Calibri 5.72.  I'll come back to thread if we have printing problems at the end-user locations. 

  • Version 33, problems when moving tab to new window, then if you open a new tab in that window it doesn't switch to it unless you use Ctrl-Tab?

    Version 33, problems when moving tab to new window, then if you open a new tab in that window it doesn't switch to it unless you use Ctrl-Tab.

    Type '''about:preferences'''<enter> in the address bar.
    Select '''General.''' Look for '''Tabs.'''
    Turn on '''When I open a link in a new tab, switch to it immediately'''

  • Exchange Mail Offline Problem when moving/deleting mails

    Hi there,
    I am using the Apple Mail Program to connect to my corporate Microsoft Exchange Server. This work perfectly well (also with the calendar, tasks, etc.)
    Mail also work s well while I am online.
    When I work offline (I often travel in planes in trains) I can write emails, respond to mails and those will be synchronized without any problem when I am back online.
    But the strange thins is that Mail sets back all changes in my inbox without any recognizable trigger. Meaning, I am moving emails from the inbox folder to other folders and/or deleting emails from my inbox. After switching from the inbox to another folder, or simply shortly to another program and then coming back, ALL moved and deleted emails show up again in the inbox. This is strange, because I am offline the whole time - thus the expanation that the server synch has changed everything back cannot be. At the same time, written emails stay in the outbox folder and remain there until I go online again.
    I asked an apple employee at Genious Bar but he could help me. Another friend of me who uses another corporat Exchange Server experiences the same  problem. Can anyone help?

    One thing that may help is to go to Mail Preferences, Accounts, and in your account under the Advanced tab select the check box for "Prompt me to skip messages over xxx kB" (where you indicate how many kB). This can reduce the download times by factors of 2 to 4 or more, depending on the size of the attachments.
    I think the more specific control you are looking for that is analogous to what you can do on the iPhone and iPad might not be available on the computer versions of Mail.
    Edit added: I just noticed that the above option is only available for POP accounts, but not for Exchange (IMAP) accounts, so unfortunately it may not apply to your account.
    Message was edited by: steve626

  • Problems when moving from OWB 10.1 to OWB 10.2

    Hello!
    I got some problems when I try to move from OWB 10.1 to OWB 10.2.
    In the new environment I have
    Oracle Warehouse Builder Client 10.2.0.1.31
    Oracle Warehouse Builder Repository 10.2.0.1.0
    When I try to create a dimension I got the following errors:
    VLD-0338: The hierarchy DEF in dimension D_ENGINE contains only one level ENGINE.
    For Storage Type-relational along with Deployment Option-Deploy Data Objects, dimension can consist of only one level (without any containing hierarchy).
    VLD-0339: In Relational Dimension D_ENGINE, the hierarchy DEF contains either only one level or no levels.
    Relational Dimension hierarchy should contain atleast two levels or relational dimension can contain only one level with out any hierarchy.
    When I then try to edit the dimension the Data Object Editor is not opened when I right-click and select "Open Editor". However when I double-click the Data Object Editor is opened but it is totally empty.
    Another problem I have is when I try to create a Process Flow, I can't create any tranistions. When I place the cursor on the first activity I get the arrow but when I drag it to the next no arrow is cretaed between them,
    I also like to add parameters to the start activity but I can't find the "Activity View"

    Hi,
    i don´t think that thie Version is so full with bugs, i use it since 11 month, that way...
    Some tricky Things there, thats right,
    but what heres explained as Problems, i think that might not be patched away :-)
    Lone

  • MB90 print problem when using print preview

    Dear Expert,
    We have print problem using transaction code MB90.
    After input data on transaction MB90 and then we choose print preview.
    Output document will be displayed, then the problem occurs, print icon and print menu are grey out.
    Please your advice.
    Thanks and Regards

    Hi,
    Just to check, is the Printer configuration complete?
    http://wiki.sdn.sap.com/wiki/display/Basis/HowtoConfigurePrinterin+SAP
    http://help.sap.com/saphelp_nw70/helpdata/en/d9/4a971d51ea11d189570000e829fbbd/content.htm
    http://basissap.blogspot.in/2008/06/how-can-you-configure-printer-explain.html
    Regards,
    Srikishan

  • Since the last software update for mountain lion I am having a problem when moving screenshots to trash. Now a Finder box appears saying finder wants to make changes and I have to enter my password for every action.

    Since the last software update for mountain lion, I am having a problem when trying to remove any screenshots to the trash. A box appears saying "Finder wants to make changes. Type your password to allow this"
    I have checked Finder Preferences and cannot find any box that I can 'UNTICK' to resolve this. I sometimes take a lot of screenshots when I am researching something and now find I have to enter my password for every screenshot to be removed to trash.
    Anyone got a solution please, Thanks

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • Pathway problem when moving files in PSE

    I use PSE 6.0 and recently had to reload my operating system (OS).  After reloading my OS I reinstalled PSE 6.0 and restored my catalog to a new location on my hard drive.  I had my catalog backed up onto DVD's.  The restore worked and I went to link missing photos, b/c I did the PSE 'no no' and moved files outside of the PSE program.  It appeared that the missing links were reconnected.  I started to spot-check some of the file property locations and noticed that many of the photo properties had the restore location that I restored the catalog to.  I did not want to keep the photo in this location, so I went to move these folders and files to my external drive where I keep my pictures (I have two drives: one for video and one for photos).  When I try to move the files in PSE to my external drive it moves them to my external video drive instead.  The problem is that when I follow the pathway it moved them to, I do not have this link on my video drive.  The pathway, however, is identical to my photo pathway.  For example.  I have a picture with the property of C:/Documents and Settings/Amy/My Documents/Restore Adobe PSE 100111/My Picture Downloads/Pella Trip.  I tried to move this file to my external K drive (which is my photo drive).  In PSE I click on file then move then browse and moved the file to K:Micah's camera photos/2011/May/2011/05 07.  In PSE when I go to verify that the file was moved to that drive, instead in properties it tells me that the file location is M (my video external drive) and lists the pathway as M:Micah's camera photos/2011/May/2011/05 07.  When I go to START and click on that external drive to follow the pathway to find the photo, it is not on M.  M does not even have the pathway to follow as I do not even have M:Micah's camera in that location.  I have tried disconnecting my external drive M and tried to save the file from the C location to my K drive and then the file becomes an offline file and I have another problem.  So then I tried to reconnect that particular file listed on M but since it's not really on M, I follow the K pathway name and find the file where I requested it to be saved which was K:Micah's camera photos/2011/May/2011/05 07.  When I find the file and click on reconnect I get the message that the file already exists in the catalog.  Then in the dialog box it says M:Micha's camera photos/2011/May/2011/05 07 was not connected to K:Micah's camera photos/2011/May/2011/05 07.  When I click on ok to exit the dialog box my photo is then missing.  I then can't do anything with it.  The pathway in PSE won't move it b/c I can't link it.  It says the file is on my M drive, but it really isn't.  I don't know what to do next.  I would like to move my photo files/folders from C (my hard drive) to K (my external photo drive).  I do not know why PSE is moving them to M (my video drive) which doesn't take me to that file.  I have searched the forums but have found no problems similar to this.  I'm not sure what to do to fix this.  Sorry this got so long...Can anyone help me?

    Highlighting a batch of images and dragging from the PSE9 Media Browser to a folder in the left hand panel, located on external HDD works fine although I’m using Vista and Windows 7 and automatically invokes the elements Move procedure.
    Make sure the new folder has a blue icon to indicate it is being managed in Organizer. If not right click on the folder and choose Import to Organizer.
     

  • Epson printing problems when upgraded to OSX 4.7

    I am trying to use an Epson DX4850 All in One on a G5 PowerMac (not Intel) running OSX 4.7 and am totally unable to print anything. The DX will scan (so it is talking to the computer!) but it will not print. I get a No Communication prompt.
    When I was running OSX 4.6 it printed 99% of the time although I did have trouble installing the Driver initially. Since upgrading to OSX 4.7 I am unable to print anything, although strangely I can scan(!?!?!)
    I have reinstalled from the software disk and also downloaded the Driver from Epson and installed that to no avail. I have also used Printer Set Up to configure everything ......again!!! I was able to get around it temporarily by moving jobs to my iBook (running OSX 3.9) which printed with no problem, but that now is also refusing to print .....but again it will scan!!!
    Where to now??
    Is this an issue with the OS X 4.7 upgrade and if so does anyone know if Apple are doing anything about it. Is there a way round this because as of now I have 3 computers unable to print anything and my work is suffering!!
    Thanks for your time
    g5 dual 1.8   Mac OS X (10.4.7)   2gb RAM

    Hello and welcome to the Discussions.
    The topics linked below, may be of assistants, but we may need further info:
    http://discussions.apple.com/thread.jspa?messageID=2689870&#2689870
    and
    http://discussions.apple.com/thread.jspa?messageID=2652924&#2652924
    Is your iMac PPC, or Intel?
    Ernie

  • HP 1536 printing problem when using the charger

    On printer, scan HP 1536, when I print manualy the copy is perfect.But when I use the charger, I have two vertical lines on the copy.Somebody can help me to solve this problem.thank you in advance 

    Take a look at this link from HP. Take a good look at the ADF Glass strip for any foreign matter.

  • Printing problem when printing a vector based program generated pdf file

    Hi,
    I bought a software which comes with a camera auto-focus calibration chart. The manufacturer mentioned that this chart is generated by a vector base program so customers can ajust the size of chart without any problem. The chart file is in pdf format.
    When I use my Photoshop CS5 (on Windows 7) to print it from my Epson 2200 inkject printer, it only print the vector part without filling up  the inside of the vectors enclosed area to black. Even the words in the footer are printed the vectors only (without fillup the word with black).
    I'd appreciate if anyone can help pointing out what's the cause.
    Thanks,
    Eric

    I have tried to print with pdf app as well. Same result.
    I found the solution yesterday while searching on line. Ended up it's the Epson 2200 driver bug. I was using Matte Black and the driver thought it is not compatible with Epson Premium Matte paper, so it did not print with that black ink. Change back to Photo Black ink solved it.
    So case resolved. Thanks
    Eric

  • Printing problem when use multiple printers

    Hi to all,
    we are using printing through multiple printers in the network, after u start the machine if u use one printer it is ok, when the time u start printing with another printer the problems start like it starts from middle of the page or it prints half of the page then it leaves balnk remainig. etc. the printers \we are using are one is EPSON LX-300+ and another is HP Laser 1200. we are using orginal softwares suppliers by the prinnters.. Oracle reports developer6 is the reports.
    any one has got experice in this.
    Thanks in advance..

    Can you access page1 and page2.jsp correctly on their own?
    ie could the problem be with page2.jsp rather than the import command?

  • Printing problem when adding a button to print the whole page

    Hello,
    I added a button with printing option = Apply to self, Print = page.
    The result is that it prints only the i-view in which the button is located. I want the whole page to be printed. The page is composed of several i-views and I also use layers.
    Has someone an idea ?
    Thanks a lot,
    Thomas

    Hi Thomas,
    I received exact the same problem case during our visual composer developments. On SPS 14 the print functionality worked as expected with the print option u201Cprint pageu201D. After the implementation of SPS 16 we had to use u201Cprint screenu201D.
    Hopes this helps.
    Best regards
    RB

  • ITunes reset when moved location

    I've been reading other postings and can't find the answer I need. Running out of HD space, I bought an ExHD and copied all my disorganized music folders (My Music and iTunes Music) into one iTunes/iTunes Music folder on the ExHD. Then I deleted the now duplicate folders on my computer HD to free up the space. Before I closed iTunes, I reset the location path in Prefs/Advanced to the new ExHD location. However, when I relaunched iTunes, it came up empty, as if it had just been installed. I have made copies of everything on the new ExHD (so I'm not freaking out yet), I just don't know which file will restore the Library (and all my Playlists, Purchased Music etc.) or how to do it. I could resynch my iPod, but I'm nervous about how the changes I've made might affect it. Does anybody know which files I need, and where to place them so I can restore it as it was before?

    iTunes operates as a database of information for your music files. The actual music files are stored on your PC, not within iTunes. iTunes keeps absolute references of the music file location and other information in its database file. This allows iTunes to use music files from any location on the PC: different directories/folders on the main HD, another internal drive, an external drive, or a network drive (or any combination of the above).
    Each song reference has a specific and hardcoded location (both drive letter & path) so iTunes can find and play (or sync) it. Move the file, change the path, re-map the drive it is on, shut down or remove the Drive, and iTunes will lose the file (giving you the '!' of a ‘Broken Link’). Lose, move or corrupt the ‘iTunes Music.itl’ file and your complete Library will ‘vanish’.
    If you delete, corrupt, or otherwise lose your ‘iTunes Library.itl’ file, you will end up with a ‘blank’ Library within iTunes. Nine times out of ten, your underlying music files are still on the PC. They can be ‘re-Added’ via the File==>Add Folder/File menu command, but you will lose some of the music meta-data. Recovering your Library via backup copies of the iTunes database file, or from importing the XML file is always preferable.
    Rebuild your Library by 'Adding' the songs back into iTunes, then Import your Library XML file to recreate your Playlists. Here's how:
    ‘Refresh/Rebuild’ Your iTunes Library
    If you changed your music locations by hand (not allowing iTunes to manage the move), want to remove duplicate song references, or just have confused iTunes too much, these steps will re-initialize your Library for you. Read it completely through and do the small trial run prior to implementing the whole thing. You will lose your Playlists, as well as reset your Ratings, Play Counts and Last Played attributes. If these are important, post back and instructions on saving these (as best as your Library has) can be provided::
    First, make sure that iTunes is correctly looking in the right Folder for your song files.
    --- Make sure you know the current location of your music files (best to confirm this)
    --- In iTunes choose: Edit==>Preferences==>’Advanced/General’ tab
    --- Select 'Change' and browse to the music folder in your PC drive (if it isn’t already)
    --- Click OK to save that setting
    -- In iTunes: Edit==>Preferences==>’Advanced/General’ tab.
    ---- Make sure that the 'Keep iTunes Music folder organized’ box is checked (if you want iTunes to organize your folder structure)
    ---- Also, that the ‘Copy files to iTunes Music folder when adding to library’ box is unchecked
    -- Click ’OK’ to accept and close the Preferences dialogue box.
    -- Single click on the "Library" in the Source Pane
    -- Single click first track in the Library
    -- Select all songs (any one of several ways)
    -- Delete – or select ‘Clear’ (yes, delete them all)
    There will be 2 dialog boxes that pop up (one at a time). The first one asks ‘Are you sure you want to remove the selected items from the list?’ The second asks if you want the files moved to Recycle Bin or to keep them in the iTunes folder. You DO NOT want to send the files to the Recycle Bin, so select ‘Keep Files’. This will only delete the song reference links (both valid and broken). It will not delete the actual music files on your hard drive.
    IMPORTANT:
    Perform a small test of this prior to doing it en mass. If you do not receive both dialogue boxes, then stop and see this link prior to continuing. You will need to reset your iTunes preferences and also retrieve the ‘deletion test’ song files from the Recycle Bin. Scott P.: My Source List is missing (or, resetting the prefs)
    Also note: 'Deleting and Restoring' the song references will reset the Play Count, Ratings, Date Added, Last Played, Ratings, and EQ attributes (there may be a few others). It will remove all song references from any Static Playlists you have. Also, any Smart Playlists that depend on any of the aforementioned attributes will be impacted. This may be a small price to pay to recover your Library -- or not.... You can ‘Export’ your Playlists to an XML file for ‘Importing’ after the refresh. This can restore your static playlists. The export only saves the song info, not the underlying music files. Of course, exporting your playlists is to be done before you delete any song references within iTunes.
    Once your song references are removed from iTunes, this is how to get them back:
    1 - In iTunes: File==>Add Folder to Library
    2 - Browse to your main iTunes folder and select it
    3 - For multiple music file locations, repeat 1 & 2
    Depending on how small/large your music library is, the speed of your computer and your amount of RAM, this could take a few minutes to a few hours.
    Your library should now be back to normal.
    To rebuild your Playlists, search for the original version of the 'iTunes Music Library.xml' file on your PC (not the most recent, current and blank one). If you deleted it, then you are out of luck.
    Within iTunes:
    - File=>Import
    - Browse to the location of the XML file and select it
    - Let iTunes do its thing
    You should have recreated your Playlists if you picked the right file.

  • Intel Macs & G5s: Problems when moving projects between them

    An earlier post* suggesting complete compatibility between the latest FCP in a G5 and in an Intel Mac may be in error.
    We are experiencing continuing crashes using our Intel Mac when we work on projects that were originally either imported or partially rendered in the G5.
    It has gotten to the point where we feel we must keep projects completely isolated from each other: Either it is a "G5 project" or it is an "Intel Mac" project. Moving projects back and forth between the two leads to problems such as:
    The Intel Mac does not recognize any renders done in the G5...
    The Intel Mac crashes when rendering 'G5' projects...
    The Intel mac crashes when compressor goes to work to export sequences to mpeg...
    The G5 works fine with Intel Mac-originated material: It is only in the Intel Mac where we have these problems.
    Both systems are up-to-the minute on their OS, security updates, and FCP versions. We are using variously 720p/30 from the JVC GY-100UA and 1080i/30 from the Sony Z1U.
    Our questions are:
    Is anyone else experiencing similar problems moving projects between a G5 and an Intel Mac?
    Is anyone moving projects between the two platforms and experiencing NO problems at all? That information would be just as valuable, and very welcome.
    Apple FCP development team: Is our experience unique or have you had other reports like this? Any idea what could be causing our problems -- and what we can do to fix them?
    * http://discussions.apple.com/thread.jspa?messageID=3604812&#3604812
    Intel MacPro Tower, 3gHz, 8mb   Mac OS X (10.4.8)   Also a G5 Tower, 2x2.5ghz, single core

    Scott,
    Welcome to the discussions!
    I have had no problems moving my G5 projects over to my MP.
    You can not move render files between machines.
    When you changed systems, did you use Migration Assistant to transfer your files over to your new Mac Pro? You might need to install from the disks in order to achieve native Intel performance. See if you installed Final Cut 5.1 on your G5 then it installed the PPC code... if you put that drive into your Mac Pro or used Migration Assistant to move the app over it is still the PPC code... When you install from the installation disk, Installer determines what system you are installing on (PPC or Intel) and that's what it installs. This goes for all of your "Universal Binary" apps...
    In the System Profiler app. under Software/Applications
    Final Cut Pro "kind" should be Universal on your MP.
    The FCP development team do not read these posts, only users do.

Maybe you are looking for