"Print report REKORD 80 has not selected any data for correspondence SAP18"
When executed FBCJ transaction click the "print cash journal" button then appears the following message "Print report REKORD 80 has not selected any data for correspondence SAP18"
What is the procedure for to fix error?
Best regards
John
HI,
John.
please refer the following link.
correspondence type
Regards,
satish
Similar Messages
-
S_ALR_87013611 is not displaying any data for GL
Hi,
THe report S_ALR_87013611 is not displaying any data for GL. How to go about this
Regards
SMHi,
S_alr_87013611 is a report where we can see the planned and actual costs in cost elements in cost center wise for a specific controlling are for a given period.
Please check if your GL accounts are assigned with the cost elements in FS00.
If not create them.
You can assing all cost elements to many GL at a time using
OKb2_ Give the range and the cost element for each range eg, expenses range - cost element 1, incomeange _Cost element as 11 etc.
OKb3 _Create the batch input session
SM30_ Run the batch input session created
Also please check if you have given the cost center group costt senter range while you entered the ranges in the selection screen in this report.
Similarly please check the cost elements and cost elements group also.
Thanks,
Shilpa. -
Custom reports in R12 not returning any data
I'm seeing an issue of custom reports in R12 not returning any data. So far what I've been able to dig into is that the report query itself is referring to APPS synonyms that are secured under MOAC. What I am able to do is run the query in SQL Developer after having run mo_global.set_policy_context and I receive the data I'm looking for. This is not the case when running the report through the concurrent programs request.
Secondly, I've also configured the concurrent program request to run as single operating unit mode. This aided in fixing any issues with LOVs on the parameter form. However, still no results from the report itself. I've also searched around quite extensively and added a P_CONC_PROGRAM_ID user parameter in reports developer, as well as adding SRW.USER_EXIT('FND SRWINIT') to the before report trigger and SRW.USER_EXIT('FND SRWEXIT') to the after report trigger as well. No luck. I've also tried running mo_global.set_policy_context on the before report trigger and no such luck.
Has anyone seen similar issues with this and could shed some light? At this point, the workaround I would see is to just change the query to use respective all tables and match up against the orgid, but I'd rather not do that.I am facing exactly the same issue with 2 of my custom Reports in R12.1.3. We did our level best to find out the issue. It was always a hit and trial fix.
But the following were our observations and workarounds
0) The reports Conc Prog were in MOAC - Single mode. Both the reports had SRW INIT, EXIT and P_CONC_REQUEST_ID
1) The reports which caused the issues[NO data fetched for MOAC] had multiple Queries in the data model and one Query fetches data and the 2nd one doesnt. Both the queries when run from SQL developer after setting the org gave results.
Workaround for Report1
a) We deleted the data link connecting the 2 columns in both the queries and added a bind variable instead in the 2nd /child query to refer to the column in the parent query and linked the 2 groups.
Workaround for Report 2
a) In report 2 the queries were not linked to each other. Only one query used to return results and the 2nd one returned 0 rows. The workaround was to use the "where" conditions as lexical parameters after having set the value for the same in before report trigger.
Both the work around looks illogical. Still It worked..!
Thanks
Biju Radhakrishnan -
HR Form do not select any data from specific Period
Hi All
I am facing issues on the HR FORMS for Brazil related to the Remunaration Statement
When I try to select any employee from a specific period (before April 2012), the system does not select any data.
From April 2012 until the current period and I could select the data and print the Form
I do not believe that is related to the Master data from the Employee, since it is always related to the same period, I guess it is on the HR Form configuration, retricting the period anywhere, but I could not find it
do you know any idea on how to fix it ?
RegardsHi Steve,
In SQL Server Analysis Services, we can hide or disable hierarchy level by using
AttributeHierarchyEnabled property, however, when this property is set to false, this level will not appear no matter if contain data or not. In your scenario, you want to hide the hierarchy level dynamically, right? As Aleksandr
said, I am afraid there is no such a method to achieve it.
If you have any concern about this behavior, you can submit a feedback at
http://connect.microsoft.com/SQLServer/Feedback and hope it is resolved in the next release of service pack or product. Your feedback enables Microsoft to make software and services the best that they can be, Microsoft might consider to add this feature
in the following release after official confirmation.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support -
Search Item drop-down does not show any data for Advanced Search.
Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, SureshHi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu -
BPMon alert reporting not showing any data for Trend Analysis
Hi,
I have setup BPMon and performed the initial setup for BW reporting. There are alerts being generated by the BPMon setup and the data has been transferred to the 0SM_BPM cube.
But when I start the Trend Analysis report I dont get any Solution for selection to generate the trend analysis chart.
I have followed all the steps mentioned in the setup guide. Please suggest any remedy.
Regards,
VishalHi ,
If your query is on multiprovider , then makesure to check there are no restrictions/filters on cubes.
Also inlcude any keyfigure from the cube,where other characteristics are being assigned from or where u r seeing data, in the query.
If you dont want to see the Keyfigure, u can hide it using keyfigure display properties in the query designer.
Hope this helps,
Aparna Duvvuri -
2009 rollup not showing any data for full year
Hi forum,
I have a structure for time which rollsup months to quarters to year in BPC. For my 2008 hierarchy I can see data in full year but for my 2009 hierarchy I can see no data coming through for full year (although I do have data in the individual months and I can see this information in BPC. Any ideas as to what could be happening ?
Thanks,
BrianThanks for your reply Sorin.
So for 2009 did you input correct to have 2009.Total father for 2009.Q1, Q2,Q3,Q4?
2009.Q1, Q2 etc.. all rollup correctly and 2009.TOTAL is the father of these four members.
What version of SAP BPC are you using?
5.1 patch 8
After you changed you dimension time did you process the dimension with full process? (if we are speaking about Microsoft version).
Yes.
We need more information because it is clear that ytou missed a step in your process.
The 2009 hierarchy is setup identical to the 2008 hierarchy so I am confused why it should not work. Can you tell me what additional information will be helpful to diagnose the problem ? -
Not getting any Data for Batch and storage Location for 2LIS_03_UM
Hi All,
My requirement is to extract Data from 2lis_13_vdkon from R/3 source system.
currently we are on R/3 PI 2003_1_470, For 2lis_13_vdkon we need to upgrade to PlugIn 2004_1.
we are planning to upgraded to Solution Tool 2008-1, will that be helpful or we need to upgrade to PlugIn 2004_1.http://help.sap.com/saphelp_nw70/helpdata/en/7f/0f8c4037fba62be10000000a1550b0/frameset.htm
Available from OLTP release
4.0 B
Delivery with
PlugIn 2004_1
Prerequisites
Prerequisite for the use of the extractor is the R/3 core SAP Note 673964 or the corresponding support package.
regards,
Colin -
I live in Houston, Texas and have tried 2 stores for the last 2 mos. There has been no availablitiy for help in working with my new laptop.
Could you reccomend a solution to this problem. My closest stores are the Galleria and Highland Village area.
thanks,
Miriam PortnoyWhy did you give your granddaughter the password?
FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
iTunes Purchase Problems: How to Report a Problem to iTunes Support
http://tinyurl.com/7tscpa7
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
Cheers, Tom -
I am now unable to print pdf documents. The message on screen says I have not selected any pages to print, even though the bullet point saying 'All' pages has been clicked. I have recently upgraded to adobe reader XI, could that be the problem? I also cannot sign in to Adobe Export pdf now either. It says 'error occured while signing in'!
Open Adobe Reader | Edit | Preferences | Documents: change View Documents in PDF/A Mode to Never.
Regarding the ExportPDF problem, please start a new topic in the ExportPDF forum. -
ReportViewer control used with a remote report does not display any data.
Hi there,
I have this .rdl report that runs just fine on our reporting server (I can see that when I try to run the report by accessing its URL in a browser). However, when I run it in my Windows-based application, I do not see any data. My report has two input parameters
and it needs to impersonate the caller's identity because the database uses Windows Authentication.
Here is the code I use:
var reportViewer = new ReportViewer();
// Set Processing Mode
reportViewer.ProcessingMode = ProcessingMode.Remote;
// Set report server and report path
reportViewer.ServerReport.ReportServerUrl = new Uri("http://MySsrsServer/reportserver");
reportViewer.ServerReport.ReportPath = "/Reports/MyReport";
// set the credentials
reportViewer.ServerReport.ReportServerCredentials.ImpersonationUser = WindowsIdentity.GetCurrent();
// create report parameters and set them in the report
var param1 = new ReportParameter("First_Param", "Some string");
var param2 = new ReportParameter("Second_Param", "Some other string");
reportViewer.ServerReport.SetParameters(new ReportParameter[] { param1, param2 });
using (var reportForm = new ReportForm(reportViewer))
reportForm.ShowDialog();
The ReportForm is just a regular Form that has a member of type ReportViewer. In the class' constructor, I assign the member:
public ReportForm(ReportViewer reportViewer)
InitializeComponent();
try
this.reportViewer = reportViewer;
reportViewer.SetDisplayMode(DisplayMode.PrintLayout);
reportViewer.Dock = DockStyle.Fill;
reportViewer.ZoomMode = ZoomMode.Percent;
reportViewer.ZoomPercent = 100;
reportViewer.RefreshReport();
catch (Exception exception)
MessageBox.Show(exception.Message);
Using database level tracing, we were able to confirm that the two Stored Procedures used by the report are called and they return correct and valid records. However, in the form nothing shows up:
Any suggestions?
TIA,
EdGood to know CR doesn't like joins of Stored Procedures to something else.
But in my testcase, I finally dropped the link between the ttx file and the stored procedure. Doing so, I was able to run the report from the designer with the stored procedure as datasource instead of the ttx file. At that moment, I still had missing data in my report, while the resultset of the stored procedure returns me all the correct data !
In the mean time, I changed the layout a bit, especially the text fields containing name, address, country and postal code and city of the customer, by just adding some spaces between those seperate databasefields. In fact, there is one text box with all those database fields concatenated one to the other.
And by just adding some spaces in between, my report works fine again ?!
Strange, strange, strange,.... -
XL Reporter not getting any data
<b>Hi</b>
When I am using XL Composer and generating report using it, I am getting data what the fields I have dragged. Not getting any data when generating same report in organizer from composer except the Title field names. Before I got but now I am not getting.
<b>STEPS Taken</b>
XL Reporter Composer Tool bar
Generate
Generate(Window)(Name: given Sample & checked Generate report then ok)
And having another problem when generating sample reports I am getting data and when editing that report are preparing new with some fields, I am not getting any data.
<b>Example:</b> I have made Edit of Bank Book and placed extra field Document No, saved the report and generated I am not getting any data except titled fields.
In new report I have taken BP Code and sales Employee I am not getting any data.
Please Can any one help me, It is urgent.
Thanks in Advance.
<i><b>Urs
Sindhu</b></i>If you did not select any "total" field (quantities, totals, etc), XL Reporter will show data only at report composer. It will not work at final XL Report itself.
This is a normal behaviour of XL Reporter, unfortunetaly.
If you are trying to create a simple list of records, I suggest to use Query Generator, combined to PLD in order to get a formatted report. -
BI Publisher Word Template The report does not contain any data fields.
I have OBIEE BI Publisher report (10.3.4) working fine using BIP but using MS Word 2003 I want to create new template and want to add charts etc.
Step 1. In MS Word I successfully login Oracle BI Publisher as Administrator
2. Oracle BI Publisher -> Open (I open the report)
3. Go to Insert -> Table Wizard
I get this error:
The report does not contain any data fields. Please make sure that the reports generates data with the default settings or provide a valid XML file.
Please helpHi
How do I load XML data? Also why XML data load is required? Do I have to export XML data from BIP View screen and load from the same file from the word?
Please clarify
Thanks -
File Screening Audit Report does not contain any data : report statistics is empty
Hi ,
I have enabled File screen audit and Record file screening activity in auditing database options in file server 2008.
I am getting details of file screen audit in Event log , But incident report file screen audit report does not contain any value.
Getting report for each incident of file screen audit , But it does not contain any data in report statistics.
Data available in scheduled report of file screen audit.. not available in incident report only..
Please assist...
Thanks,
Vasanth.M
Thanks, Vasanth.M.Please note that, If the Record file screening activity in the auditing database check box is cleared, the File Screening Audit Reports will not contain any information. To configure file screen audit, I would refer you on this informative
technet library :
https://technet.microsoft.com/en-us/library/cc754540.aspx
Carlo -
Data selection procedure 400 could not find any data
Hi ,
I am getting the Information message "Data selection procedure 400 could not find any data " while doing the Result recording of a inspection lot
Inspection lot status :- REL CALC
Inspection lot Origin :- 04 GR from production order
No user status active
This message i am getting in some inspection lot only
Kindly help me to understand the possible resaon for this message
Thanks,
Ishwarhi,
u r using any copy inspection result like of thing, if not than please provide the Mssg number. and possible than check ur plan properly.
F9 i have checked, this prblm occurs when u using the Copy inspecttion result during RR in QA32, ma suggesstion is to checck ur config "Copy inspection results" in SPRO properly against inspection type "04", and than check ur qaulity plan, than execute it will resolve.
For more information:
SPRO Settings: COPY INSPECTION RESULTS DURING RESULTS RECORDING
Regards
Edited by: D GURU on Dec 5, 2011 8:35 AM
Maybe you are looking for
-
Trying to get the Opening and Closing Balance, 0TOTALSTCK and 0VALSTCKVAL
Hi Experts, Good Day. I am developing a query for Stock Balances, Using Custom cube created with copy from 0ic_c03. I am trying to get the Opening and Closing Balance, based on Non-Cumulative KF - 0TOTALSTCK and 0VALSTCKVAL. Both The KF's Behaviour f
-
Excel output display issue after exporting the report
Hi All. We are using BI Publisher with Oracle retail for report generation.While exporting report in excel format , after saving the file we are not able to see the data. When we do a Format-->Autoformat and select one of the options, we can see the
-
ENVY dv7t-7200 Replace hard drive and restore from recovery disk/flash drive
I am replacing the HDD on my ENVY dv7t, running Windows 8. The existing drive is a 5400 rpm 1TB and I am replacing with a 750GB Seagate momentus XT. Largely, the reason is performance and I don't need that large of a drive. The plan is to remove th
-
Dear Friends, I am performing Simple File to JDBC scenario. For this I am using MySql. I have designed and configured all the required steps and activated. Now I went to Runtime Work Bench monitoring.. Here in Message monitoring status is "w
-
Bugs and issues I've run into.
First the bugs PDF links are problematic. Most of the time they just say "Cannot find an application which can open this file." I've been able to get one to download once, but even then then the browser doesn't launch the PDFs. If I later go into