Print Results form assignment in QA33

Hi,
When we click print results for a inspection lot from QA33, the pop-up window displays a default form QM_INSP_RESULT.
I want to know where this form is assigned.
thanks and regards
Murugesan

Hi Murugesan,
This form is SAP standard form you can see this form in SE71 T-Code.
For printing result of inspection lot (QA33), just give this form name in the field 'form' under print parameters tab and execute it will ask for output device.Enter device name and print.
Regards,
Raja.

Similar Messages

Printing a form

Hi folks,
I had an question, related to printing the form using sapscript. I am printing a sapscript form using two printers. The first one is HPLJ4000 : HP Laserjet 4000   and the model is Dell Printer and using this printer the form is printing fine.
However when I print using another printer HPLJ4000 : HP Laserjet 4000 but a different model HPLJ 2100TN some of the data is not printing in the right font size. The font I am using is HELVE and I believe it is not recognising it.
I do not know how to work on the issue, asked the Basis guy too he has no clue about it.
Any thoughts or ideas will be helpful?
Thanks,
Sk

Hi
See this OSS notes
OSSNote:960341
Symptom
In some device types (e.g HPLJ4, HPLJ5) you experience non-uniform character spacing in the PDF document after the PDF conversion of SAPscript or Smart Forms documents, using HELVE or TIMES fonts. You want to know the reason.
Other terms
CONVERT_OTF, SAPscript, Smart Forms
Reason and Prerequisites
The problem is not due to an error in the PDF converter but due to the fact, that the printer font, underlying the device type (e.g. Univers or CG Times in PCL-5 device types), is not available for the PDF converter and is either not available in Adobe Reader. The PDF converter has to try to simulate the layout of the printer font by means of a font which is predefined in Adobe Reader. This is done by assigning the letter widths of the printer font to the font used in Adobe Reader.
The PDF file contains a table with letter widths, used by Adobe Reader in the output of text, for each used printer font (except PostScript fonts).
Example:
%Charwidth values from HP4300 HELVE 060 normal
/Widths
[ 278 333 500 633 633 1000 758 333 333 333 633...
Adobe reader converts this width table, by modifying the space between each character, so that the specified letter width (= space between the current and the next letter) is kept.
This 'Simulation' of printer fonts results in the sometimes visible irregular spaces in PDF.
The PDF converter always uses the Helvetica Adobe PostScript font for the display of HELVE and the Times Roman Adobe PostScript font for the display of TIMES. However, for these Adobe PostScript fonts, Adobe Reader often uses a Windows TrueType font, which differs slightly from the original PostScript font.
Solution
Workaround: Use the POST2 PostScript device type or the PDF1 PDF device type for the PDF conversion of documents in the Latin-1 character set. They both use the Adobe PostScript fonts Helvetica or Times Roman for the HELVE/TIMES printer fonts.
Header Data
Release Status: Released for Customer
Released on: 30.06.2006 12:44:06
Priority: Recommendations/additional info
Category: Consulting
Primary Component: BC-CCM-PRN Print and Output Management
Secondary Components: BC-SRV-SCR SAPscript
OSS Note: 776507
Symptom
Documents printed via SAPscript or SmartForms do not print with correct special characters, e.g. ### prints instead of Japanese or Russian characters. What to do?
Other terms
SAPscript, SmartForms, printing, device types, OTF
Reason and Prerequisites
Help required to choose proper fonts in a SAPscript or SmartForm
Solution
When using SAPscript or SmartForms to print (or email or fax) a form from a business application, many factors influence the outcome of the actual text within the form. All these factors must be checked in order to ensure a correct printout:
1) The language version of the form used to produce the printout.
Example: If you want to print a French invoice, you need to have a FR version of your SAPscript or SmartForms invoice form RVINVOICE01. And the application program must specify the corresponding language key (FR) when calling the SAPscript or SmartForms API.
2) The font selections specified in the form (possibly also in a SAPscript style or SmartStyle used in a form).
Example: In a SAPscript form or a SmartStyle you need to specify HELVE if you want to print German text in Helvetica (or similar) font. If you want to print Japanese text, HELVE is not a valid choice but you need to specify a Japanese font like JPMINCHO in your Japanese form.
3) The output character set of the device type
Every printer in transaction SPAD has a "device type" assigned. Device types used by the spooler for printing support only one single specific output character set. All text from the form has to be converted (using SAP's built-in character conversion mechanism) to this output character set.
A character set can typically support either a single language (e.g. Shift-JIS which supports only Japanese) or a set of languages (e.g. ISO 8859-1, which supports Western-European languages). It is possible that a given language (such as German) can be supported by several output character sets, e.g. you may use either ISO 8895-1 (Latin-1) or ISO 8859-2 (Latin-2) to represent German text. This is so because both character sets contain the special characters used in German.
Example: HPLJ4000 is a HP LaserJet device type supporting the ISO 8859-1 (Latin-1) character set. ISO 8859-1 can be used to represent e.g. Dutch, English, French, German, Spanish, Swedish but NOT Russian or Japanese.
As a consequence, it is ok to use HPLJ4000 to print English, German French etc. but not for Japanese or Russian.
4) The set of available printer fonts for a given device type
When formatting a document, SAPscript and SmartForms perform an automatic mapping of the font definitions in the form (e.g. "HELVE 14 point bold") and the available printer fonts of the device type. A replacement printer font is chosen, should the specified font selection not be available in the device type. Now this replacement can be problematic if a language-specific font, such as Chinese CNSONG, is specified in a form and it gets replaced by a font which does not support this language, e.g. COURIER.
To solve this problem, font families in SE73 have language attribute assigned, e.g. some fonts are characterized as being suitable only for certain languages. And when a replacement has to be chosen because the original font from the form is not available in the device type, a replacement font is chosen which has the same language attributes.
If no fonts for the language in question exist in the device type, the resulting font will not be able to print the special characters and you will see "wrong" output characters in the printout.
Note on SAPscript/SmartForms Print Preview:
The OTF Print Preview available in Windows GUI (e.g. from transaction SP01) will sometimes not show the "wrong" characters which appear on the final printout. Here is the reason: since the Print Preview runs in Windows environment, it will use Windows fonts to represent the actual printer fonts. A Windows font typically has more available characters (i.e. covers more character sets) than are actually available in a printer's resident font.
A typical example where the Print Preview will differ from the printout is here: if you have a Chinese PCL5 printer such as CNHPLJ4 and use the Western Latin font COURIER in your document, the print preview will show you Chinese characters if you (by accident) tried to format Chinese characters in COURIER font. This is because Windows will automatically choose a font that can output Chinese characters (which is actually not Courier). But when you print the job on an actual PCL5 printer with resident Western and Chinese fonts, the Courier font will not print any Chinese characters but Western special characters instead, because the printer's resident Courier font does not include Chinese characters.
Rule of thumb: all Asian device types (e.g. CNHPLJ4, JPHPLJ4, JPPOST, KPHPLJ4) support not only Asian fonts but also COURIER, HELVE and TIMES fonts. But these Latin fonts can only be used to print English text, not Chinese/Japanese/Korean characters.
Which fonts are suitable for a given language?
Language(s):            Font family to use in a form:
Latin-1 (Western Europe/Americas) *******
DE,EN,FR,ES,NL,SV       COURIER, HELVE, TIMES
                        (LETGOTH, LNPRINT)
Latin-2 (Central Europe) ****************
PL, CZ                  COURIER, HELVE, TIMES
ISO 8859-4 (Baltic) *********************
ET, LT, LV              COURIER, HELVE, TIMES
ISO 8859-5 (Cyrillic) *******************
BG, RU, SR, UK          COURCYR, HELVCYR, TIMECYR
ISO 8859-7 (Greek) **********************
EL                      COUR_I7, HELV_I7, TIME_I7
ISO 8859-8 (Hebrew) *********************
HE                      COURIER, HELVE, TIMES
ISO 8859-9 (Turkish) ********************
TR                      COURIER, HELVE, TIMES
Simplified Chinese **********************
ZH                      CNHEI, CNKAI, CNSONG
Japanese ********************************
JA                      JPMINCHO, DBMINCHO, DBGOTHIC
Korean **********************************
KP                      KPBATANG, KPDODUM, KPGULIM
                        KPGUNGSE, KPSAMMUL
Traditional Chinese *********************
ZF                      TWDPHEI, TWMING, TWSONG
Thai ************************************
TH                      THANGSAN, THDRAFT, THVIJIT
Arabic (Unicode systems only) ***********
AR                      ANDALE_J
Verify your output by examining the OTF data
When analysing printing problems of this type, be sure to check the OTF data which gets produced by SAPscript or SmartForms. OTF or "Output Text Format" is the intermediate page-description format generated from SAPscript or SmartForms. OTF will contain the final printer font names and character set/language identifiers which help to solve the problem. OTF will even name the form and the language of the form used to create the output.
The easiest way to do this is to create a spool request from your application, run transaction SP01, use menu
Goto->Display Requests->Settings
and choose
Display Mode: Raw
Now display your spool request. If this is a SAPscript or SmartForms spool request, you will see OTF data. Each line represents one OTF command, every command starts with a 2-character cmd identifier and possibly some cmd parameters follow.
Here is an excerpt from a sample OTF file where we highlight the most interesting commands:
//XHPLJ8000    0700 00000000001
IN04EALEXTEST_ZEBRA
IN05%PAGE1
OPDINA4 P 144 240 1683811906000010000100001
IN06%WINDOW2
MT0024401289
CP11000000E
FCHELVE 120 00109XSF100SF101110000067E X
UL +0000000000000
SW00067
CT00000000
ST0453037Dieses SF hat Stil ALEXTEST_ZEBRA mit
The 1st line with the // (Control) command reveals the device type usedto print: HPLJ8000
//XHPLJ8000    0700 00000000001
The 2nd line (IN = Info command) shows the name and (internal 1-char)language key of the form:
IN04EALEXTEST_ZEBRA
In this case it is the English (E = EN) SmartForm ALEXTEST_ZEBRA
The OP-line (OP = Open Page) gives the page format used in the form, it is DINA4 Portrait orientation:
OPDINA4 P 144 240 1683811906000010000100001
The CP (CodePage) cmd shows the SAP system codepage used to code the text and the active language. In our case it is codepage 1100 and language E = EN = English.
CP11000000E
Finally, the FC-cmd (Font Call) lists a printer font selected within SmartForms. Please note that every SmartForm has a designated default SmartStyle under "Form Attributes->Output Options". In addition, every text node can have a SmartStyle attached (which will override the definitions from the default style for the text). In our case the resulting printer font that was selected is HELVE 12.0 pt bold-off, italic-off.
FCHELVE   120 00109XSF100SF101110000067E X
Header Data
Release Status: Released for Customer
Released on: 22.08.2005 09:57:20
Priority: Recommendations/additional info
Category: Customizing
Primary Component: BC-CCM-PRN Print and Output Management
Secondary Components: BC-SRV-SCR SAPscript
BC-SRV-SSF Smart Forms
<b>Reward points for useful Answers</b>
Regards
Anji

HP LaserJet P1505n Printer frequently loses assigned static IP address and goes offiline

We have replaced printer several times, assigned printer static ip to eliminate network related issues. Ran, Scan Doctor;
- reinstalled printer drivers
- power cyled printer
- check for network connectivity
- Printer works perfectly ( for a brief period of time.)
What's mind boggling, ( if I may) is that IPv4 service was turned off when printer went offline. Logical right? Turned it back and it works for a while and goes offline again. Boggie man stops by that printer to turn-off network connections repeatedly. This is frustrating and makes my department look bad. May be we should try a different brand of printer. Any suggestions will be greatly appreciated.

Hi gr---8 ,
Sorry to hear you are still having issues setting up the printer on the wired network.
We will need to find out if it is the Ethernet port on the printer, or the network causing this issue.
Do you have Mac filtering on the router?
Disconnect the Ethernet cable from the printer.
Restore the printer back to factory settings.
Print a hardware test page to test the printer's hardware. Make sure the SSID and IP address is cleared from your router's setttings. Printing a Configuration Page in Windows.
Connect the Ethernet cable directly to the computer.
Print the configuration page again to see if you get a IP address to test the Ethernet port on the printer.
What is the IP address?
Run the add printer wizard to install the printer.
Test the printer.
Were you able to see the printer, add the printer and print?
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
Please provide in detail the results.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Printing the form using output type and Standard program

Hi all,
   I am a beginner on SAP.Now i get a doc for smartforms.
   It need to print a form.And need to create a output.I don't know how to create it and how to use it.
   And how to use the standard program to print the smartfroms.
   Can you give me a thought about that??

Hi steven,
first u copy the standard form and modify as u required.
copy the print program.
after that assign modify form to modified print program using NACE transaction code.
NACE->slect application->go with output types->select suitable one->go with processing routines->select medium->provide modified program name and form name->save the details.
go for view->go for transport.
go with the appropriate transaction suitable to your application.
and provide one existing record->issue out put->go with print
i think it will useful for you.
Reward points if useful.
Thanks,
Usha

Smart form assignment for fb60 document

Hi Experts,
I have one issue pertains to smart form, my client wants to take print with his logo at the time of FI invoice document.
Once user post the invoice in FB60, the using the document number we need the details in a form.
For this abaper developed a smart form, but i could not find where these form will be assigned for print, and requirement is that in the FB60 transaction itself if user press the print button then taking this developed form to print.
Please suggest that how to make these assignments?
Regards,
Raghav

HI,
I don't think you can call the form developed directly from FB60 after posting the document.
I would recommend to use the functionality of correspondence.
After posting the document in FB60 from Menu --> display document and from there you need to generate the correspondence request and then print the form from F.64.
Regards,
Kiran Yelamarthy

Form assignment

hi all.,
i have a problem with form assignment,i have made complete print program for order quotation and layout. but when i execute from se 38 editor i get the selection screen and after giving the order number i am able to view the output layout but when i assign it in the outtype ba00. its not giving the output. i have even tried making z output type by copying ba00 and assigning print program and layout but when i try issueing output its not showing output. is there any thing else to be done.please help me out with this. urgent

Hi
Since you have designed your own Z Custom driver program with your own selection screen for the Order/quotation and Zscript you can't trigger the Output using Std Output type BA00
This std Output type is triggered with the Std program RVADR01 and with the form RVORDER01
You can copy these program and Script and do changes and attach the Copied program and Script to this output it will be triggered agaon
So means to say that the Output type BAOO is triggered from the Std program (even if you copy this std and attach it will trigger)
But you are using your own designed program with selection screen it is better to run your own program and take the output type.
But if you wants to see/take output type you have to use this std program and use and attach in NACE tcode or in V/30 Tcode
Reward points for useful Answers
Regards
Anji

Print Confirmation Form: All Plans

Dear Experts.
I want know What is the name of the service(link) that is closed in the box green for put this service out in a subarea. In this moment this service is a link in the iView of Benefits Participation
Attach Image following:
[Print Confirmation Form: All Plans|http://www.freeimagehosting.net/uploads/312757289a.jpg]
Thank in advance for your help.
Best Regards
Juan.

Dear Suresh
I checked the Views V_T7XSSSERSAR & V_T7XSSSERSARC using SM31 in the backend, but I don't found a service assign to Subareas with Text "Print Confirmation Form."
I also check the view V_T7XSSSERVSRV and not exits a service with Service Link Text "Print Confirmation Form..."
Can I put this service as a link in a Subarea?
Thank in advance for your help,
Best Regards
Juan

Benefits Participation Print Confirmation Form

There is a Print Confirmation Form link on the Benefits Participation page that brings up an adobe form with a benefits summary. Where that form is located, maintained, and how can it be changed?
Edited by: David Keiser on Feb 25, 2009 12:33 AM

Hi,
Go to Flexible Admin-->Form setup -->Assign templates to form types.
And also in
ESS >Home Page>services-->EMPLOYEE_FLEXBENS_PRINT_FORM & EMPLOYEE_FLEXBENS_PARTICIPATION
Resources-->EMPLOYEE_FLEXBENSPARTICIPATION_SERVICE
Here give the URL for Benefits Participation.
Kind Regards,
Saisree.S

Help in printing smart form

hallow
i doing a smart form and i cant print it becuse when i send it to printer
it stuck (proccing job) and my friend from other place can print the form
in this printer .
word or other thing i print normally .
it happen in some computer in ower organization and this is a large problem
i ask the basis and he said some thing about gui that different from my friend and mine but i don't now how to check it?
maybe it different thing?
how can i solve this problem?
regards

Shnya,
NACE is a transaction code where in the functional consultants attach the script or smartform to a related driver program.Added to that they will set some other configurations like Prcessing routines and partner functions.Check whether they have assigned this to a output type and other stuff.Check with the Functional Guy.
K.Kiran.

Printing material characteristics assigned to class 001

Hi
i am working on printing material characteristics.
i am using vc_I_GET_CONFIGURATION FM to get all the characteristics associated to the material.
now i want to print the changes in the bottom under the label Fields changed/Modified.
if i change any characteristic value(s) and save the form and issue output i need to print the form and bottom i need to print the characteristic that is changed.
may i know how can i capture these fields? my characteristics are assigned to 001 class and hence data is not stored in tables...
let me know if there is any solution to work around...
thanks

hi
i am not able to trace which characteristics are changed....
may i know where the characteristics are stored for class 001

Printing PDF forms to an impact printer

Greetings,
I hope I've found the correct forum for this question.
We are having difficulty printing PDF forms to an impact printer. We are required by regulations to print to multi-part forms from our GTS landscape, which is going live soon. Since Adobe is the direction SAP is headed with forms, we have been utilizing ADS. However, the need for impact printing has presented a problem. Has anyone utilized PDF printing to an impact printer? I'll list some details in case it will help.
Printer: Lexmark Forms Printer 2590
Backend Print Solution: HP Output Server on AIX
SAP GTS: NetWeaver 7.0 SP17 w/ SLL-LEG 720 SP7
Our printer has printer languages of Epson Emulation and Personal Printer Data Stream (PPDS). Neither of these are included in the standard device types for PDF as specified in OSS Note 685571. I do not see an appropriate XDC file to copy and modify.
Has anyone else run into this issue and found a resolution?
Many thanks for your assistance.
Wesley Tollett

the PortName should be changed accordingly.
if you are using printer port , commonly lpt1, you should change it to lpt1
ur command line could work , i think
i've tried it locally in my machine, it works fine.

Print multiple forms between FP_JOB_OPEN and FP_JOB_CLOSE

I am aware, that there are questions regarding "Printing Multiple forms", but I didn't find answers there.
Still my system is not working as expected:
1. FP_JOB_OPEN is called
2. the generated Adobe Forms function is called multiple times
3. FP_JOB_CLOSE is called
This program doesn't deliver all the pages, but just the first call. How shall I solve this problem?
(Coding should work anywhere with copy-pase.)
data: fm_name           type rs38l_fnam,
      fp_docparams      type sfpdocparams,
      fp_outputparams   type sfpoutputparams.
parameters: p_fpname type fpname default 'FP_TEST_02'.
* Get the name of the generated function module
call function 'FP_FUNCTION_MODULE_NAME'
exporting
    i_name     = p_fpname
importing
    e_funcname = fm_name.
* Sets the output parameters and opens the spool job
call function 'FP_JOB_OPEN'
changing
    ie_outputparams = fp_outputparams
exceptions
    cancel          = 1
    usage_error     = 2
    system_error    = 3
    internal_error = 4
    others          = 5.
* Call the generated function module
call function fm_name.
* SECOND CALL ****************************
call function fm_name.
* Close the spool job
call function 'FP_JOB_CLOSE'
*    IMPORTING
*     E_RESULT             =
exceptions
    usage_error           = 1
    system_error          = 2
    internal_error        = 3
    others               = 4.

Hi ZSOLT,
In order to call the form multiple times please do the following,
1) Just before your FP_JOB_OPEN you need to pass the output parameters (good practice). You can also set other parameters as well (for example nodialog, preview, copies., etc)
CLEAR fp_outputparams.
fp_outputparams-dest = 'PDF1'.      "Default pdf printer
fp_outputparams-reqnew = 'X'.       "New spool request
Now call your FM FP_JOB_OPEN with the above output parameters.
2) Usually this step is processed in a loop. (getting your interface data into a internal table and then looping at it)
But here I am enhancing your example code.
In order to trigger the form multiple times you need to change some input data to the form (for example I have changed date and time below in the prepare test data sections) so that the call function fm_name gets regenerated every time there is new data
data l_datatypes       type sfpdatatypes.
prepare test data
l_datatypes-char = '#'.
l_datatypes-string = 'Auf geht''s! '.    "#EC NOTEXT
l_datatypes-numc = '42'.
l_datatypes-dec = 0 - ( 12345 / 7 ).
l_datatypes-fltp = 0 - ( 12345 / 7 ).
l_datatypes-int = 4711.
l_datatypes-curr = 0 - ( 12345 / 7 ).
l_datatypes-cuky = 'JPY'.       " no decimals
l_datatypes-quan = 12345 / 7.
l_datatypes-unit = 'DEG'.       " 1 decimal
l_datatypes-date = '20040613'.
l_datatypes-time = '100600'.
l_datatypes-lang = sy-langu.
FIRST CALL ****************************
Call the generated function module
CLEAR fp_docparams.
fp_docparams-langu = 'EN'.
fp_docparams-country = 'US'.
call function fm_name
    exporting
      /1bcdwb/docparams        = fp_docparams
      datatypes                = l_datatypes
      mychar                   = l_datatypes-char
     mybyte                   =
      mystring                 = l_datatypes-string
     myxstring                =
      mydate                   = l_datatypes-date
      mytime                   = l_datatypes-time
      mynum                    = l_datatypes-numc
      myint                    = l_datatypes-int
      myfloat                  = l_datatypes-fltp
      mypacked                 = l_datatypes-dec
IMPORTING
    /1BCDWB/FORMOUTPUT       =
prepare test data
l_datatypes-char = '#'.
l_datatypes-string = 'Auf geht''s! '.    "#EC NOTEXT
l_datatypes-numc = '42'.
l_datatypes-dec = 0 - ( 12345 / 7 ).
l_datatypes-fltp = 0 - ( 12345 / 7 ).
l_datatypes-int = 4711.
l_datatypes-curr = 0 - ( 12345 / 7 ).
l_datatypes-cuky = 'JPY'.       " no decimals
l_datatypes-quan = 12345 / 7.
l_datatypes-unit = 'DEG'.       " 1 decimal
l_datatypes-date = '20100913'.                 "You need to change your data in order it to trigger a new form with the new data.
l_datatypes-time = '10700'.                        "You need to change your data in order it to trigger a new form with the new data.
l_datatypes-lang = sy-langu.
SECOND CALL ****************************
Call the generated function module
CLEAR fp_docparams.
fp_docparams-langu = 'EN'.
fp_docparams-country = 'US'.
call function fm_name
    exporting
      /1bcdwb/docparams        = fp_docparams
      datatypes                = l_datatypes
      mychar                   = l_datatypes-char
     mybyte                   =
      mystring                 = l_datatypes-string
     myxstring                =
      mydate                   = l_datatypes-date
      mytime                   = l_datatypes-time
      mynum                    = l_datatypes-numc
      myint                    = l_datatypes-int
      myfloat                  = l_datatypes-fltp
      mypacked                 = l_datatypes-dec
IMPORTING
    /1BCDWB/FORMOUTPUT       =
Close the spool job
call function 'FP_JOB_CLOSE'
   IMPORTING
    E_RESULT             =
exceptions
    usage_error           = 1
    system_error          = 2
    internal_error        = 3
    others               = 4.
I have tested the above code and I am getting multiple forms.
Please try on your end and let me know if it works.
Thanks
Raj

View/Save/Print Embedded Form on Webpage to PDF

How can a user View/Save/Print Embedded Form on Webpage to PDF?

Hi,
Currently FormsCentral does not support to View/Save/Print Embedded Form from the Webpage to PDF. If you are the form author, you can save/print the form to PDF in FormsCentral, and the PDF forms can be viewed in Acrobat or Reader.Or if you like, you can save/print the entire web page to PDF using the browser, but the form could not be submitted then. I hope it's clear, and please let me know if you have any questions. Thanks!
Kind regards,
Shiyao Bao

How to print a form in a UIX page

I want to print a form in a UIX page? I have tried a lot of methods,but they did not work.I only want to print the contents in the form ,not including the contents of the page title ,tab bar,etc. Can someone tell me?Thank you!

Yu -
You'll want to use the "printable" facet when rendering your page. The following sample page contains a button which allows the user to view the "printable" version of the page. It uses the <showFacet> event handler to switch to the printable facet:
<?xml version="1.0" encoding="UTF-8"?>
<page xmlns="http://xmlns.oracle.com/uix/controller"
      xmlns:ui="http://xmlns.oracle.com/uix/ui"
      xmlns:data="http://xmlns.oracle.com/uix/ui"
      xmlns:ctrl="http://xmlns.oracle.com/uix/controller">
<content>
<pageLayout xmlns="http://xmlns.oracle.com/uix/ui">
<tabs>
    <tabBar>
    <contents>
       <link text="Hello"/>
       <link text="World"/>
    </contents>
    </tabBar>
</tabs>
<pageButtons>
    <pageButtonBar>
    <contents>
      <button text="Show Printable Page" ctrl:event="showPrintable"/>
    </contents>
    </pageButtonBar>
</pageButtons>
<contents>
    <text text="Printable area"/>
</contents>
</pageLayout>
</content>
<handlers>

<event name="showPrintable">
    <showFacet name="printable"/>
</event>
</handlers>
</page>Andy

How to print Adobe Forms without the black/gray backgrounds in the side columns

How can we print Adobe Forms without the black/gray backgrounds in the side columns? We are wasting a lot of ink printing out these forms and would like to have simply black ilnes to distinguish columns and black lettering, but no background colors. Any help would be appreciated. Thanks.

I am not positive what you are printing from but I am thinking it is from the View Responses tab with a response row selected and then shown in "Detail View" and that the column of field names has a dark grey background...
To change the color of the column headers select the row of headers (do this by clicking on the first dark grey header field and then scroll to the last one and shift+click on the last one), then in the "Text" tools change the text color to Black and the Fill color to white:
(Selected the header cells)
Changed the text/font color to black and the fill color to white
Now you can see the detail view does not have the dark grey.
Thanks,
Josh

Print Results form assignment in QA33

Similar Messages

Maybe you are looking for