Print with ME9F or SP01 for different PO document type

Fiends,
I have copied a PO document type to ZNB and I am unable to see the documents in ME9F or SP01 inspite of maintaining the following. But I can see the print preview
With the similar settings document Type NB is working fine in ME9F
Output Type  NEU
Key Combination Purchasing Output Determination  Document Type
Document Type ZNB
Function VN
Medium 1
Date Time 3
Language EN
Communication
Output Device  LP01
Print Immediately is Checked
Sap Cover Page Do not print
Assigned device to Purchase group
Defined Text for messages for this PO type too
Friends please give me solution for this It is very very critical.
Regards

Sorry guys for confusing all of you. The issue was with the release procedure..the POs were not released... inspite of the release button showing "released"... I did not check the status..
hence closing this thread
Thanks

Similar Messages

  • Transaction ME59N for different PO document types

    Hi,
    I am in process of setting up process for converting PRs into POs automatically through transaction ME59N.
    I have created various document types per Plant. That means, one PO document type for one plant & other document type for another plant.
    Now, my problem is how can I control (or select) the document type while running the program. I want to run the program for MRP generated PRs in various plants with different PO types.
    There is no selection possible for PO document type in transaction ME59N.
    Is there any way out for the selection of PO document type in transaction ME59N.
    Regards,
    Prashant Kolhatkar

    Hi Prashant,
    This area of configuration might help you out:
    Materials management -> consumption based planning -> planning -> procurement proposals -> define external procurement then the MRP Group button.
    Have a look.
    Steph.

  • Differentiating of pricing schema for each purchasing document type

    Dear colleagues,
    This topic could be discussed before but I need to clarify some points.
    We would like to differentiate pricing schema per purchasing document types (e.g. AA and ZZ). These purchasing documents are not like domestic and import types.
    There some condition(s) where purchasing document type AA should not be able to maintain whereas ZZ should be able to.
    In this case shall use one unique pricing schema for both purchasing document types if so how can I hide some conditions for document type AA or if I use separate pricing schema how can I set different pricing schemas for different purchasing document types because both document types have same purchasing organization, vendor etc. 
    Regards
    Metin

    Hi,
    Why to have two different schema groups! Is procurement process is completely different, so use to have!
    (have thought of separate condition types for each Calculation Schema)
    Based on Schema Group Of Vendor in the vendor master, the PO for vendor with respective Schema Group Of Vendor will populate the assigned condition typesu2019. Follow path:
    SPRO->MM->Purchasing->Conditions->Define Price determination process ->Define Schema Determination
    Under segment:
    Determine Calculation Schema for Standard Purchase Orders
    Here you can assign Schema Group Purchasing Organization, Schema Group of Vendor and Calculation Schema
    Under segment:
    Determine Schema for Stock Transport Orders
    Here you can assign Schema Group Purchasing Organization, PO document type and Calculation Schema
    Regards,
    Biju K

  • Two different billing document types for 1 sales document type.

    Hi Gurus,
    I have a requirement , wherein our client is having counter  sale.
    He is using one sales doc type , and while creating a order , he is manually adding payment terms.
    Requirement is , if the payment terms are cash, billing doc type created later on should be one , else during credit sales , billing document type should be different.
    As per my understanding this is not possible.
    Want to know if anyone has some different thought on this.
    Thanks in advance
    Nilesh.

    Dear Nilesh,
    There two options you can look in to
    One option is
    1.You can define different sales document types for cash and credit.
    2. You can define two different billing documents.
    3.Do the copy control settings for each combination
    Cash sales order >Delivery>Cash invoice
    Credit sales order >Delivery>Credit invoice
    Second option is
    1. You can maintain single sales document for both the processes.
    2.Define two different billing types then do the copy control settings for both billing types.
    But in this option user need to select the billing type manually based on the process while creating billing document.
    I hope this will help you,
    Regards,
    Murali.

  • In f110, the DMEs for different payment documents have been combined

    Hi,
    In f110, the DMEs for different payment documents have been combined.
    Two DMEs are created but they are not in separate lines.
    Kindly help.
    Thanks

    Contd ....
    Example 2 -  the following is an example of multiple payment documents against each invoice
    FH 13062008T1.001 13/06/2008 14:22:27 #
    H 10000002 13/06/2008 HSP04 NEFT-S 002-434132-908 INR INR ABNBK A.B.ENTERPRISE 999999
    L 10000002 13/06/2008 HSP04 NEFT-S 1900007628 NM             4000.00           4000.00
    H 20000003 13/06/2008 HSP04 TRFR-S 002-434132-908 INR INR ABNBK A.B.ENTERPRISE 999999
    L 20000003 13/06/2008 HSP04 TRFR-S 1900007629 NM             5000.00           5000.00
    H 30000003 13/06/2008 HSP04 RTGS-S 002-434132-908 INR INR ABNBK A.B.ENTERPRISE 999999
    L 30000003 13/06/2008 HSP04 RTGS-S 1900007630 NM             6000.00           6000.00
    Z ZOF #                                                                               
    Example 3 - This is one payment document against multiple invoices
    FH 14032008.001 14/03/2008 10:11:49 #
    H 700013 14/03/2008 HSP01 TRFR 072020779001 INR INR HSP01 Srinivas 464646 154   Ba
    L 700013 14/03/2008 HSP01 TRFR 0100000836 NM           200000.00         200000.00
    L 700013 14/03/2008 HSP01 TRFR 0100082351 NM              100.00            100.00
    L 700013 14/03/2008 HSP01 TRFR 1900106433 NM            10000.00          10000.00
    L 700013 14/03/2008 HSP01 TRFR 1900106552 NM            25000.00          25000.00
    L 700013 14/03/2008 HSP01 TRFR 1900106613 NM           120000.00         120000.00
    L 700013 14/03/2008 HSP01 TRFR 1900106617 NM           120000.00         120000.00
    L 700013 14/03/2008 HSP01 TRFR 1900106620 NM           120000.00         120000.00
    L 700013 14/03/2008 HSP01 TRFR 1900106621 NM           120000.00         120000.00
    L 700013 14/03/2008 HSP01 TRFR 1900106622 NM            12000.00          12000.00
    L 700013 14/03/2008 HSP01 TRFR 1900106677 NM            50000.00          50000.00
    L 700013 14/03/2008 HSP01 TRFR 1900106701 NM             1000.00           1000.00
    Z ZOF #                                                                               
    Hope this helps.
    Thanks and Regards,
    Anit
    Edited by: Anit Mangat on Aug 6, 2009 11:41 AM

  • Descriptive flexfield for different purchase order types

    Hi,
    Can i have a descriptive flexfield for different purchase order types?
    Scenario : I have two purchase order types
    1. Blanket : done from req--> auto create --> standard PO
    2. Standard --> Direct PO
    Regards
    846691

    You can use darpan77's suggestion for context sensitive DFF. See http://oracle.anilpassi.com/context-sensitive-descriptive-flexfields.html for an example.
    However, both options you mentioned talk about standard po. Is the difference in how they are generated? (One is manual and the other is autocreated?)

  • Return PO box ticked for return PO document type

    HI All,
    There is a help need for Badi.  While creating a return PO in T Code ME21N, i want to get return PO field  ( EKPO-RETPO) box ticked for Return PO document type. I found one BADI for ME_COMMITMENT_RETURN. I need help to use this badi.
    Regards,
    Madhu.

    Hi
    Why don't use the BADI ME_PROCESS_PO_CUST, method PROCESS_ITEM? You have a demo. The idea is:
      data: ls_mepoitem type mepoitem,
            ls_header type ref to if_purchase_order_mm,
            ls_data_header type mepoheader.
      ls_mepoitem = im_item->get_data( ).
      ls_header = im_item->get_header( ).
      ls_data_header = ls_header->get_data( ).
      IF condition IS TRUE.    "with LS_MEPOITEM, LS_DATA_HEADER
        ls_mepoitem-retpo = 'X'.
      ENDIF.
      im_item->set_data( ls_mepoitem ).
    I hope this helps you
    Regards
    Eduardo

  • PO from PR only for a particular document type

    Dear Gurus
    I want purchase orders should be raised with reference to purchase requisitions only. System should allow to make purchase orders with reference to purchase requisitions only for a particular document type only.
    I have configured in OMET and assigend this in SU3, now the system is not allowing to create PO for all document types, but I want to restrict this for a particular document type only
    Is there any configu change required?
    Regards
    Muthukumar

    Hi
    You can make it in MM - purchasing -> purchase orders -> define document types -> check the document type -> click on link purchase requisitions.
    And in define screen layout at document level - make PR mandatory for your purchase order document type (field reference).
    Thanks
    Edited by: Praveen Raghavendra on Jan 12, 2009 2:07 PM

  • Create different billing document types from same sales order type

    Hello,
    Please take a common document flow, just  like this one:
    - Sales Order (type ZE01 )
    - Outbound Delivery
    - Billing Document ( ZA or ZB )
    The billing document is based on the outbound delivery. Here is the requirement that we need to implement:
    - We need to determine different billing document types ( ZA or ZB ) according to a custom determination, based on a Z table. In some cases the billing document will be type ZA, in other cases it will be type ZB. I've been told that I can achieve this  via copy control , but some extra help would be welcome.
    Any clues?
    Regards,
    Joã

    Hi João G Neves ,
    Were you able to achieve this requirement using a  user exit? if so could you let me know the name of the user exit? Basically in our current project a sales order can be billied using 6 different billing document types. The copy controls between the sales  document and billing document is been set up for all the 6different billing doc types and currently the users are manually selecting the billing document type in VF01 .The buisness insists on making this automated.They want the billing document type to be determined based on some custom condtions.
    Any inputs regarding this is highly appreciated.
    Thanks & Regards,
    Srini

  • Make material as a mandatory field for a particular document type in PR

    Hi,
        Currently we are in SAP 4.6c version. There is a business requirement for making material as a mandatory field for a particular document type of purchase requisition as they don't want the user to raise non material purchase requisition using that document type. The field for material is currently not available in the configuration for Define Screen Layout at Document Level for purchase requisition.
    So could you kindly let me know the possible options to prevent user from raising a non material purchase requisition using that document type. If not could you kindly suggest me the user exits available at the time of saving purchase requisition which i could use so that we can write a code to check if the material number is entered or not. If not entered prevent the user from saving the purchase requisitions.
    Also it would be helpful if you could let me know how the fields for enjoy transaction (like material,document type) can be made available for selection in the configuration for Defile Screen Layout at Document Level for purchase requisition.
    All you help in the solving the above problem is highly appreciated.
    Thanks & Regards
    Ram

    Hi,
    Check below method works out for you, if you do not want to proceed with any ABAP development.
    Have a custom field selection key with Material Description field as "Mandatory" and "Display" in Basic Data, Item selection group.
    Assign this to your PR document type which need material as mandatory. With this you are making user to enter material indirectly as mandatory & user will not have an option of entering text which avoids indirect / service procurement.
    "Material Group" option won't help as User can have default settings with some value and it updates even in display mode of field.
    Regards,
    Ram
    Edited by: Ramprashanna S on Jan 11, 2012 11:51 PM

  • BASIS--to restrict authorization for a PO document type & 122 movement type

    Dear All,
    Plz guide me how to restrict authorization for a PO document type & for a movement type 122 i.e. for eg. if a user has authorization for PO document type IC then he should not be able to rum movement type 122 for any T-code he runs.
    Thanks in advance
    Arpit
    Basis

    Hi,
    Your request was not too clear to me.. As per my unde
    Here is some details of Authorization object related to Purchase Order:
    Document Type in Purchase Order( M_BEST_BSA )
    Purchasing Group in Purchase Order (M_BEST_EKG )
    Purchasing Organization in Purchase Order  (M_BEST_EKO)
    Plant in Purchase Order  (M_BEST_WRK )
    Document Type in Outline Agreement (M_RAHM_BSA )
    Purchasing Group in Outline Agreement (M_RAHM_EKG )
    Purchasing Organization in Outline Agreement ( M_RAHM_EKO )
    Plant in Outline Agreement ( M_RAHM_WRK )
    This can be helpfull to you to restrict authorization to PO..
    In Organization Level, it can be restricted by Purchasing group, Purchasing organization and plant..
    Regards,
    Sandip

  • To Make WBS element Mandatory for a particular Document type- Contract

    Hi ,
    I have a requiment where I have to make to Make WBS element Mandatory for a particular Document type of Contract . I don't want to use any User exits or Badis for this .
    Please let me know if there is any configuration that can be done to achieve this .
    Regards,
    Hari.

    Hi ,
    It is already made mandatory in account assignment categories  but My requirment is that it should be mandatory for only one particular document type . In the account assignment categories , there is no where we can specify the document type . It is only at account assignment category level but not at document type level .
    Regards,
    Hari.

  • Purchase value for a particular document type of po

    I need Purchase value for a particular document type of po

    Hi Thanks for the reply. Sum of net order value will give right. Any selections we have to do at headr level ? Does it hold good for SA's also ? Please help

  • For a particular document type posting using FB50/F-02 should be restricted

    Hi all,
    I have a requirement that, for a particular document type posting using FB50/F-02 should be restricted.
    Any idea?
    Thanks,

    Hi,
    what Exactly i need to write in validation is...
    PREREQUISITE.
    company code eq '0001' or '0002' or '0003'.
    and doc type 'XX'.
    CHECK
    data: l_flag type c.
    check action eq 'BU'.    "only when clicked on 'post' in FB50
    Import l_flag from memory id 'YMMID'.
    if l_flag eq ''.
    endif.
    message
    'Doc cann't be posted'.
    Is it possible to write above code in validation?

  • Cost Distribution in Shopping Cart for different account assignment type

    Hi friends,
    We are at SRM Server 5.5 at level SAPKIBKT07. Business scenario is extended classic.
    User is creating a shopping cart with single line item and distributing the cost to multiple account assignments (say Cost Center and Order). Shopping cart has a valid source of supply. System creates a PO in SRM and tryu2019s to replicate the PO in ECC backend, however fails to replicate.
    My understanding is that in ECC backend it is not possible to combine two different account assignments while distributing cost at item details.
    Solution would be to create separate line items for different account assignments (distribute between similar account assignments).
    Is my understanding right?
    Thanking you in advance,
    Sandeep

    Sreedhar,
    Thanks for your update.
    I am also MM consultant, so as far as MM goes we can only maintain one account assignment type per line item. In MM we have provision of multiple account assignment but it works only for single account assignment type per line item. Which means if account assignment is "k" then we can split between multiple cost centers, but we cannot split between cost center and WBS element in one line item.
    You said it is possible to split between multiple account assignments in one line item. Will it be possible for you to try at your end and let me know how PO/PR are created in backend?
    Sandeep

Maybe you are looking for