Printer determination for sapscript form output

Hello All,
We have configured different printers for the different plants in our sales organization. When we create a delivery, there is a requirement to send the delivery form output (bill of lading, delivery note etc.) to the appropriate printer based on the plant for which the delivery is created.
Is it possible to do this and if yes, how should this be done?
Any help will be greatly appreciated.
Thanks in advance,
Rugmani

Hello,
I created a condition table '550 - Shipping point/plant'. Then I created an access sequence 'ZSH1' and assigned this condition table 550 to it.
In the output determination procedure, the procedure 'V10000 - Header output' has the condition type PL02 - BOL: Single Delivery assigned to it.
The assignments look like:
Step       Counter         Cond Type
10               1                LD00     Delivery Note
20               2                PL00     Packing list
30               3                PL01     Planning Slip
40               4                PL02     BOL: Single Delivery
In Assign output procedures, the entry corresponding to delivery type 'LF' is:
Del Type                O/P procedure                       O/P Type
LF Delivery                    V10000 Header Output             LD00Delivery Note
When I try to enter a new condition record using VV21, it does not show up this key combination 'Shipping point/Plant'.
Can someone tell me if I am missing some customization?
Thanks,
Rugmani
Edited by: Rugmani Rajan on Oct 22, 2008 3:06 PM

Similar Messages

Output determination for P45 form...

I had a quick look at OSS 1230107 in regards to the new P45 A4 form. All seems to have been installed and is working, although all three pages print to the same printer tray at the moment.
I have made a copy of sapscript HR_GB_P45_A4_D (ZHR_GB_P45_A4_D) and have added the appropriate tray information for each of the three pages. However, I am familiar with output determination for SD/MM but have no idea where I can substitute SAP's form for my Z form?.
Jas

Subject: Re: Output determination for P45 form...
Message: We know have everything printing, however, neither of the new SAP supplied P45 forms align correctly, they are both around 5 or 6 mm out, especially when printing on the HMRC pre-printed stationary. The form which prints the boxes etc. onto plain paper (HR_GB_P45_A4) seems to miss the heading off, "P45 Part 1A", for example, it's almost as though it has printed off the top of paper with the last 1mm of the heading showing. The form for pre-printed stationary is exaxtly the same with all fields about 5 or 6 mm out, vertically.
We have a Lexmark 630 and our basis team have checked that we have the right driver for it. We also have am HP laserjet as well, but that behaves exactly the same.
Has anyone encountered this problem before?.
At first I thought it may be because the printer itself is configured for Letter rather than A4, but I've checked the front panel menu of the printer and it's set to use A4.
I know that I can correct this problem bu changing every field for all three pages, but should I have to modifiy this. Does anyone know if SAP have released a fix for this?.
Jas
Hi Jas,
Yes we have faced this problem before, now I am not sure what has been done in the system to resolve it, but my Basis Consultant configured a separate Local printer in the system called ZP45 or something. It will work exactly like a local printer and print to the default printer assigned to the PC, but the alignment becomes spot on. Instead of choosing LOCAL, the user selects ZP45 when running the P45 program. We did not need to do anything to the sapscript form itself.
Hope this helps.
Edited by: Harish Krishnan on May 19, 2009 9:48 AM

Output determination and Printer determination for both PO and GR

Dear all,
Can anyone please help me in congiguring the output determination and printer determination for both PO and GR. please give me detailed configuration including the paths as i am stuck with the configuration.
Thanks & Warm Regards
Somashekar Anand

hi Somashekar
follow he steps
Output of Purchase Order
1. Condition Table
SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
Select:
Purchasing Doc. Type,
Purch. Organization,
Vendor
2. Access Sequences
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
3. Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
*4. Message Determination Schemas*
4.1. Message Determination Schemas
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
4.2. Assign Schema to Purchase Order
SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
5. Partner Roles per Message Type
SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
6. Condition Record
Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
Output of GR
After setting table, access sequence and output type for GR,run MB02 transaction, enter material document number. Double click one line item and select messages. Separate screen will be opened to configure outputs. Give the required fields and save the document. Now Run MB90, you can take printout. Output Type: WE03 or WE01 or WE02
Reward points if helpful
Thanks and regards
Ravikant Dewangan

How to disable debugger for sapscript forms.

How to disable debugger for sapscript forms.
Once activated in se71-Utilities-Activate debugger I do not know how to disable it

Thank you Rich
I assigned you points for good answer on my preavious mail)
. Actually my real problem is a transported the SAP script form znalepke2 , printer definition nale
and device type zststartsp of a thermal printer.
On original system (ak1) the printout is ok but on target system(ak2)
not.
Lateron I transported also :
R3TR SCPD 1403(as the device type uses this character set)
R3TR TABU TSP08 (All entries)
R3TR TABU TSP1D(All entries)
R3TR TABU TSP1T(All entries)
I used also report RSTXSCRP to traport form and device types. L
Lately I discovered that when I performe printout preview I get also eronneous printout If I ssue an printout preview in language "EN" on system "ak1"(only on system ak1 and form preview in "SL" is oK. What steps you suggest me to solve the prolem
Thank you in advance

Standard print program for Adobe Forms

Hi all -
Does anyone know if there was a standard print program delivered for the predelivered Adobe form F110_AVIS_INT? And if there is - what is it? Is there any document anywhere to determine predelivered print programs for Adobe forms?
Your help is much appreciated!
Thanks
Abby

Hi
In SAP you can check for the Print Programs in Tcode <b>OB96</b>
which gives assignment of programs to script layouts
see the links related to Adobe forms
look at the Adobe page here in SDN:
https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=AdobeForms.htm
Check these links on Adobe forms
http://help.sap.com/saphelp_nw04/helpdata/en/1e/05853ff8ec2c17e10000000a114084/content.htm
https://www.sdn.sap.com/irj/sdn/interactiveforms
http://www.sap.com/solutions/solutionextensions/pdf/BWP_Interactive_Forms_Adobe.pdf
It contains lots of useful information, documentation, and e-learning materials teaching you the basics.
Reward points for useful Answers
Regards
Anji

I Require standard names for Sapscript form

hai to all ,
would any body help me in finding the standard sapscripts forms names and their correponding standard print programs for the following topics;
1. RFQ
2. QUOTATION
3. CONTRACT
4. CUSTOMER STATEMENT
5. FI-INVOICE
6. FI-CREDIT MEMO
7. DUNNING LETTER
8. ACCOUNTS PAYABLE CHECKS
Correct answers will be appreciated.
thank you ,
rajesh kumar.

Hi Rajesh,
Go to Nace transaction.Choose your application.For Example RFQ application EF and for Sales Application V1 , Billing V3. After selecting go to the output types and from there Processing routines.
U can also search using tables.for sd and mm related scripts u can find in table TNAPR and for finace related script programs and layouts u can find in table t001f.
If this helps u reward me points.
Regards,
vijay.

Userspecific Printer determination for orders / invoices

Hello SD-experts,
At the moment output types are found via condition records, based on sales org / sales unit. These condition records contain the printing parameters. The requirement now is that for some users the parameters should be userspecific.
My problem is: there is the printing rule in the output type (1,2,U,S..) and there are the printing parameters of the condition records. Which one has priority ? At the moment it seems that the printing rule of the output type has no influence if output is determined via condition access. That's right ??
Any usefull hint would be highly appreciated ..
Regards Wolfgang

You can either do as suggested in previous post defining additional condition table and adding it to your access sequence prior to other steps so it searches for user-specifuc output first, if not ofund - then everything remains as before.
Or you can change printer in your print program before opening the form (check 'itcpo' structure passed to OPEN_FORM)... of course it works only if you have your own print program for your output types.

How to find standard print programs for ADOBE forms

Hi All,
My question is how to find the standard SAP print program for a SAP provided ADOBE form. For example - how to find what is the satndard SAP provided print program for the ADOBE form for payment advice 'F110_AVIS_INT'.
As by default in the transaction F110 (where the payment advice form configuration is done), a SAP Script form is attached and the print program assigned is an SAP Script (as it contains call to function module like open_form, write_form... ) program and not an ADOBE print program.

Hi Renu,
I have gone through the link provided by you but it only shows a list of standard PDF forms.
My question was how to find the standard SAP provided print program (or driver program which contains the data fetch logic and passing of the data to the interface of the ADOBE form) for these SAP provided ADOBE form.
If SAP has provided standard ADOBE form then definitely they would also have provided the standard print program too ?
@Srihari,
The path system --> Status --> program SAPLFPUIFB is the standard program for the SFP transaction and not for the payment advice form F110_AVIS_INT.
It will be same for all the ADOBE forms if we check in System --> Status --> Program.

Driver program for Sapscript form

Hi All,
My Sapscript Z From has been configured for company code,and it is present in table T042B.
T042B-ZBUKR = 4418 (company code)
T042B-AFORN = ZCOTL_ADVICE (SAPSCRIPT FORM)
Can anyone please tell me from which table I should get the Driver Program for the above Sapscript Form.
Kindly Reply ASAP.
Rishi

Hello Rishi,
Could you please let us know how did you find the driver program for the forms in FICO
Thanks,
Smita

Copying print program for sapscript

Hello all,
I would like to customize the print program PSFCPICK which we are using to print a sap script for shop orders.
So I did a copy of the program and named the new one ZPSFCPICK and assigned the copied print program to the list in OPK8. I know the copied print program is called when printing the script,
but no output is coming out of the printer. When I change it back to the original program, it is working fine.
Is there anything I have to pay attention when copying a print program??
Thanks
Anne

HI Anne,
Check in this custom program or copied program whether you are calling FM - CLOSE_FORM
The function module closes the layout set opened using OPEN_FORM. The system executes any terminating processing steps for the last opened layout set. You must use this function module to close layout set printing. Otherwise, no output appears on printer or screen.
Best Regards,
Krishna

Automatic Printer determination for PO - Settings

Hi SAPians,
When creating a Purchase Order using transaction CO60 through process instruction sheet, i have made a printer settings for Normal PO print settings,still its not printing automatically to my printer,
then i need to find the PI Sheet, and search it to give manual print.
Please provide any inputs in Customizing or printer set up configuration for normal PO, and PO created through PI sheet.
Regards,
Romesh.

Hello,
In SPRO assign you priner to the purchasing group which you are using.
To do so, please follow below path :
SPRO - > material management - > Purchasing -> messages->Assign output devices to purchasing group..
Hope it will do..
Subhash

How to create a transport for SAPscript form

Hi Gurus,
Good day!
I would like seek an expertise from you guys on how i'll be able to create a transport for the SAPscript form. The form has already been copied from the other boxes by running the program RSTXSCRP.
Appreciate your help. Thanks in advance!
Cheers,
Virgilio

hi,
First u create the driver program of the sapscript...ok..
then go to the SE93 and create the T_code of that driver program..
Hope This helps
Regards
RItesh J

Printout is distinct font in different printer but same SAPscript form

Dear experts,
I have one SAPscript form ,Pintout in pinter HP2200 and HP4100, but printout is distinct font.
Could you help me?
Thanks and regards,
collysun

Hi,
just ask your basis people to check whether the page format has been attached to the second printer's device type. the page format should be attached to the printer. else font differences occur.
Kumar

Output is not going to Printer Directly for XML (PDF) Output

Hi,
I am trying to print the AP Check Advice output directly to printer,using FND_REQUEST.set_print_options before submission of concurrent request. This was working perfectly,when report was RDF(with PDF) output. I changed it as XML with PDF output. Please help here.
CREATE OR REPLACE PROCEDURE <NAME>(ERRBUFF OUT VARCHAR2,
RETCODE OUT VARCHAR2,
P_PAYMENT_BATCH IN VARCHAR2) IS
L_REQUEST_NO NUMBER := 0;
L_PRINTER BOOLEAN := TRUE;
L_OUPTPUT_FORMAT VARCHAR2(100);
XML_LAYOUT BOOLEAN;
BEGIN
-- Submit the request to Run the report
L_OUPTPUT_FORMAT := 'PDF';
XML_LAYOUT := FND_REQUEST.ADD_LAYOUT(TEMPLATE_APPL_NAME => 'SQLAP',
TEMPLATE_CODE => 'SDAPBFAD',
TEMPLATE_LANGUAGE => 'en',
TEMPLATE_TERRITORY => 'IN',
OUTPUT_FORMAT => L_OUPTPUT_FORMAT);
IF XML_LAYOUT THEN
IF l_printer = FND_REQUEST.set_print_options('bapr001',
'PDF_PORT',
1,
TRUE,
'N',
'RESOLVE') then
FND_FILE.PUT_LINE(FND_FILE.LOG, 'Printer Setup Completed');
END IF;
L_REQUEST_NO := FND_REQUEST.SUBMIT_REQUEST(APPLICATION => 'SQLAP',
PROGRAM => 'SDAPBFAD',
START_TIME => NULL,
SUB_REQUEST => FALSE,
ARGUMENT1 => P_PAYMENT_BATCH,
ARGUMENT2 => FND_GLOBAL.LOCAL_CHR(0));
END IF;
COMMIT;
END ;

Payables: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
SDAPBFAD module: SDD Format Payments (Advice Print)
Current system time is 01-JUL-2009 11:20:31
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_PAYMENT_BATCH='Quick Payment: ID=461458'
Environment will now switch to UTF-8 code-set.
Parts of this log file may not display correctly
as a result. This is an expected behavior.
XML_REPORTS_XENVIRONMENT is :
/app/oapps/11.5.5/opm7ora2/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /app/oapps/11.5.5/opm7ora2/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
AMERICAN_AMERICA.UTF8
MSG-00001: After SRWINIT
MSG-00002: After Get_Company_Name
MSG-00003: After Get_NLS_Strings
MSG-00004: After Get_Base_Curr_Data
MSG-00800: Getting Payment Batch details....
MSG-00007: After Custom_Init
MSG-00020: After SRWEXIT
MSG-00010: L_REQUEST_ID
MSG-00020: Printer Setup Compeltedbapr002SDDCHECK
MSG-00010: L_REQUEST_ID23907445
MSG-01001: Quickcheck - deleting temporary records....
Report Builder: Release 6.0.8.27.0 - Production on Wed Jul 1 11:20:31 2009
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter Username:
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 23907442 on node HOUN35 at 01-JUL-2009 11:20:42.
Post-processing of request 23907442 completed at 01-JUL-2009 11:20:48.
------------- 2) PRINT   -------------
Printing output file.
Request ID : 23907442
Number of copies : 1
Printer : bapr001
Finished executing request completion options.
Concurrent request completed successfully
Current system time is 01-JUL-2009 11:20:49
<stdin>: The file is damaged and could not be repaired.

How to debug program RVADEK01 for SAPSCRIPT FORM S_PICK_SINGLE

Hello Experts,
Am using TCODE VL01N to print out the Form SD_PICK_SINGLE ,I tried to activate the debugger on the Form in SE71 after that executed the driver program RVADEK01 which didnt work so I tried to execute the tcode VL01N but nothing happens .Unfortunately both ways seems not to trigger the debugger to stop at the Form,.Can anyone help ?
Thank you
JA

Hi,
Think you have not done the output type configuration correctly in NACE transaction. Check with the following scenarios.
1. In NACE transaction, check whether the correct program and SAP script is assigned against the output type which you are selecting in VL01N transaction for the printout.
2. Try using transaction VL02N or VL03N once the delivery is created. Make sure that the OUTPUT TYPE which is configured with the program and SAP script is triggered in the respective delivery.

Printer determination for sapscript form output

Similar Messages

Maybe you are looking for