Printer Error message in CS6

I am running CS6 on my Imac with 10.9.2. I just upgraded to Mavericks last week and I now cannot print from Photoshop to my Epson 7890 (or any printer, actually). I get the following message: "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." I have relaunched Photoshop multiple times and restarted my compter, checked all of my printer settings, all with no positive results (Illustrator CS6 seems to work fine). I looked on other forums with this same message, but all of the participants seem to be running on CC. I do not know if this makes any difference? I could re-install but would only do this as a lst resort. Thank you!

When you place a PDF, there's a little checkbox in the lower-left: "Show Import Options." Check that box when placing your PDF. In the "General" tab of your import options dialog, you'll see a "Crop to" dropdown. There are a bunch of options. I'm guessing that "Trim" is selected by default. We have no idea how that PDF you are trying to place was made - but it certainly sounds like the trim box is not defined. If you have no idea what any of those crop options are, read up on 'em. If you don't care - try Bounding Box (the normal default), or Media.

Similar Messages

How to print error messages in browser?

When I visit a jsp file in browser, there's some errors in the jsp file, so the browser returns
The page cannot be displayed
There is a problem with the page you are trying to reach and it cannot be displayed.
I want the detail error messages, so I can debug my problem. How to print error message in browser or find the message in some log file?

Hi Kanaraja,
Thanks for your answer. I need to get certain information from the list. So, I use LIST_To_ASCII FM. However, may I know the ascii_tab should be type to what? And after this FM, do I have to use another FM to display the ascii list?
data ABAPLIST type ABAPLIST OCCURS 0.
SUBMIT RPCALCU0 VIA SELECTION-SCREEN
with PNPXABKR = 'US'
with PNPTIMRA = 'X'
with PNPPABRP = '10'
with PNPPABRJ = '2003'
with PNPPERNR-LOW = '100750'
with PNPPERNR-LOW = '109202'
with PNPPERNR-LOW = '100255'
with PNPABKRS-LOW = 'US'
with SCHEMA = 'ZUSP'
with RADI_EDT ='X'
with EDT_VARI = 'CUS&SAP_US'
with TST_ON = 'X'
EXPORTING LIST TO MEMORY and RETURN.
CALL FUNCTION 'LIST_FROM_MEMORY'
TABLES
    listobject       = ABAPLIST
EXCEPTIONS
   NOT_FOUND        = 1
   OTHERS           = 2.
CALL FUNCTION 'LIST_TO_ASCI'
EXPORTING
    list_index         = -1
TABLES
    listasci           = asci_tab
    listobject         = ABAPLIST
EXCEPTIONS
    empty_list         = 1
    list_index_invalid = 2
    OTHERS             = 3.
IF sy-subrc NE '0'.
WRITE:/ 'LIST_TO_ASCI error !! ', sy-subrc.
ENDIF.

How can I print emails? Printing Error message that no printers are installed. (Printers are installed.)

When I click File > Print, I get a Printing Error message that no printers are installed. Printers are installed. When I click Yes to install a new printer, I receive a new error message that "Windows can't open Add Printer / The local print spooler service is not running. Please restart the spooler or restart the machine." I updated to the new version of Thunderbird 24.6.0. Using Windows 8. I restarted the machine. I confirmed printers are installed using Control Panel. I do not see any way to restart a print spooler. How can I fix this? Thanks.

The print spooler is a windows service and is required to print. I would hazard a guess you can not print with any application.
What I am saying is I think your windows instalation has a problem, not Thunderbird.

I am getting a "printing error" message on my Pixma M432 and a lightening icon at the right

I am getting a "printing error" message on my Pixma M432 and the lightening shaped icon in the triangle beneath the stop button is flashing. My documents won't print and are backed up onscreen on my computer. I have turned it off and on. What is wrong?

solution?

Printer error messages

psc 2170 all in one printer, error message "remove and check cartridge" this has appeared for no obvious reason when I now switch on. I have removed and cleaned contact points on both cartridges and printed to no avail so would be most grateful for any suggestions that might help.
Thank you
This question was solved.
View Solution.

Hi - Did you clean the contacts in the printer (carriage) as well? If not, try that to see if that resolves the problem - Step 5 in this document.
If that doesn't resolve the problem, the next step is to replace the cartridges (one at a time, in case only one of them is bad).
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Printer error message

Printer error message
Printer hp LaserJet CP1525nw
Windows 7
The following message is displayed when sending any file to the above printer.
"hpmns115.dll has stopped working"

Hi jwnova142 ,
Welcome to the HP Forums.
I see that you are having an issue with a Paper Size Error when attempting to print.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I have also located a document that deals with the 'Paper Mismatch,' or 'Paper Size Mismatch' Error Message Displays When Printing.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

I'm getting a "printer error" message when I try to print a document with a lot of scans in it. Any suggestions?

I'm getting a "printer error" message when I try to print a document with a lot of scans in it. Any suggestions?

OK, I tried a few things, and I do not understand the results.
1) I opened the document in Preview, and it would only recognize the three initial pages which I typed using the Pages App. It did not recognize the bulk of the text which I copied from Appleworks 6. It also did not recognize any of the scans.
2) I tried opening a pdf in Preview, and it would only recognize the scans. (No Text!)
3) I tried copying everything (select all, and command-c) in Pages, and then opened a blank Pages doc, and typed Command-v. This got me all of the text, but none of the scans!
4) I was worried that my Pages app might be corrupted, but I successfully converted a similar 78-page document with copied materials from Appleworks 6 and similar scans, ant this worked perfectly.
My conclusion is that my file must be corrupted. Is there any way to check this? shabda88

Envy 5534 on MAC- print error message unable to convert post scrip file

New printer set up fine prints letter but when I want it to print a page with bar code on get error message :-
print error message unable to convert post scrip file
Can any one help please
This question was solved.
View Solution.

Hi @itsalex,
What type of bar code are you printing, and from what program? Just a thought, what if you print the barcode as an image, if you are not already? Try File>Print> Advanced> Print as Image> print.
If the issue persists, let's reset the printing system and repair the disk permissions; doing so may resolve the issue.
Reset Printing System
Click the Apple icon ( ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or Ctrl +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer and add the printer back.
When you add the printer, please ensure you are using the HP driver.
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can select the printer drive. In the screenshot below, you will see Airprint is auto selected, you can change it to the HP driver though.
I look forward to hearing back from you.
Talk to you later alligator
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Photosmart 6510 Printer error message 0xc19a0003.

I have a Photosmart 6510 Printer error message 0xc19a0003. I have re-powered the printer but still get the error message Oxc19a0003. Suggestions to fix?
Thanks!

You are correct, gksurgeon, the 5510 does not have a removable printhead. If you followed the steps in the document above, then the printer will need to be replaced.
If you are still in warranty, HP may replace the printer at no cost to you. I'll link the information to get in touch with them below. The link will take you to a form to fill out. Once you fill it out and it is processed, it will give you the printers warranty information, a case number, and the phone number to call.
HP Technical Support Case Call Form:
http://goo.gl/w7Hgh
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Getting print error messages after 8.1.3 update

Adobe Acrobat 8 - Since the 8.1.3 update a couple days ago, I am now getting print error messages in the Adobe PDF printer status box when I send any document to the Adobe PDF printer. The actual printing of the document in Adobe works correctly, but these error messages occur as well - even though the document printed just fine.
I am running Windows Vista Ultimate and did not have the issue prior to the 8.1.3 update.

I have removed PDFMaker from Office, to try to simplify the troubleshooting. All attempts to print end up the same, whether from PDFMaker (before I removed it from Office), from print to Adobe PDF from within an Office app, or using Create a PDF in AP 8.1.3 from an Office file ... the last hourglass comes up in "reading Adobe PDF" and stays up. I can see the "target file" created in WinExpl but greyed out, and the hourglass (busy) never goes away in AP 8.1.3.
In contrast, if I want to create a pdf from a "save as" text file, AP 8.1.3 creates the pdf instantly. Create a pdf from scanner also works fine. This problem is definitely related to updates, since AP 8.1 worked perfectly the last time I used it from Office, which was perhaps 2 months ago.
AP 8.1 suddenly stopped working this week with a "can't create PDF" error message, I updated AP all the way to 8.1.3, and have the problem described above. I don't get an error message now, the create PDF or print to PDF simply never completes.
BTW, both my desktop and notebook run Vista Ultimate 64-bit, both have registered and activated copies of AP 8.1.3, and Office 2007, and both have the exact same problem.
I uninstalled AP 8.1.3 on the desktop, installed the trial version of AP 9.0, and experienced the exact same problem as with AP 8.1.3, the create pdf never completes, but produces no error message.
I print to XPS as a workaround since print to Adobe PDF never completes.

Photoshop not printing: error message

I am having serious trouble, I would label it an impossibility, printing in Photoshop CS6 (and Photoshop CC, I tried both) When I select print, I get an instant error message:
"There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."
I am running Mac OSX10.9.3. I have done a de-install and re-install. I have also re-installed the printer drivers. I have no difficulty printing through InDesign or any other programs. No matter what printer I try (I have three to use) Photoshop will not print.
Mysteriously, I had no trouble printing this time yesterday, and have not changed my hardware or external software since. The problem is with Photoshop. Thank you (anyone!) for your help.

So no one has solved this?
I have the same problem, so my slow work around is this: Save as PDF and print from either Preview or Adobe Reader which both work fine (suggesting that Photoshop might be the issue).
NB, the fault occurs on both CC and CC 2014.
Can't seem to find any info on the fix or work-around so any help would be appreciated.
thanks
Jonno

Help on printing error messages to a log file

Hi, may I know whether is there any way to print the error messages to a log file? Thanks for your help!

noobboy,
Please refrain from crossposting all of your questions into multiple forums. You were asked to stop this the last time you did this as well. Please be more considerate in future.

After upgrading to Lion, Printer error messages.

After upgrading to Lion, I suddenly see the following error message whenever I print to my HP printer: "You can't open the application PrinterProxy because PowerPC applications are no longer supported." Now, my document will print, but I can no longer adjust settings. Help??

PowerPC applications are no longer supported under Lion. If you can't find Lion drivers on HP's website, you either need to go back to Snow Leopard or start looking for a newer, compatible printer.

Acrobat Pro 8: When I print to pdf I get windows print error message

This just started happening when I installed my acrobat professional 8.0 on my new computer (with Windows XP Pro). Everything works fine, but when I print a document to .pdf, I get that windows printer pop-up message that says that it was unable to print. As a consequence, I get a bunch of allegedly unprinted documents in my printer queue that I have to keep deleting. This is more an annoyance than anything else, but can anyone tell me how to stop this from happening??
THanks.

OK, I'm still not sure I'm getting this, but I printed to file, and then opened the prn file in Acrobat Distiller. The actual pdf file was not in the folder, but I could open it with distiller.
The message below distiller said: tart Time: Tuesday, January 20, 2009 at 13:03:04
Source: retainerpetitionreview.prn
Destination: C:\Documents and Settings\Mark Markus\Desktop\retainerpetitionreview.pdf
Adobe PDF Settings: C:\Documents and Settings\All Users\Application Data\Adobe\Adobe PDF\Settings\Standard.joboptions
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
%%[Page: 3]%%
%%[LastPage]%%
Distill Time: 00 Hour(s) : 00 Minute(s) : 00.265 Second(s)
**** End of Job ****
However, when I just print "regularly" (not, "to file") the pdf file is saved and generated, but I get that popup error message, which stays in my printer queue, saying that there was an error printing to LPT 1

HP Officejet Pro 8600: "Unable to Communicate with Printer" error message

I receive the error message "Unable to Communicate with Printer" regularly when I print. Sometimes it will print 3 or 4 times just fine before I get this message. Sometimes it happens my first try at printing. I then have to reboot my computer to get it to work again. My OS is Windows 7 and my printer is an HP Officejet Pro 8600. My printer is wired to my computer. I have tried re-installing the printer software but this did not help. I've had this printer for only four months. Started happening after the second month. Any suggestions?

I finally solved it. Reflecting back on previous message boards I decided to try one last time. Some posters have found the problem in the Antivirus, Firewall protections. (By the way, I had even upgraded my router with no luck).I have Norton AntiVirus provided by the cable company.1. I turned off everything in the firewall. Although this left me vulnerable for a few mintues, I needed a fast test.2. It worked! I was able to print something immediately.3. I went back into the firewall, turned everything back on but turned off an individual switch within the firewall that said to "share the printer. "4. After turning it off, I was able to print and still have the most important parts of the firewall.This ultimately met my needs.Perhaps HP could:1. Do a better job at beta testing prior to release, including various brands of firewalls. Is there even a beta test process?2. Provide a better description of the error since all indicators within the drivers say the printer is connected. There should be a message indicating that it's connected but unable to print due to firewall protections.

Printer Error message in CS6

Similar Messages

Maybe you are looking for