Printer server error when attempting to print wirelessly

Hope someone can assist me. I get the following error when I use system diagnostics when I attempt to print through the airport extreme wireless USB printer port, "Cannot connect to sever. Network diagnostics was able to connect to the internet, but not to the server "HP Photosmart 8100 series.riousbprint.tcp.local. This could be caused by problems with the server, or an Internet problem between this computer and the sever." When I attempt to print, the printer receives the signal and begins its cycle but I soon get a printer stop message with no reason.
Thanks,
Mike
15" G4 Powerbook Mac OS X (10.4.3)

Restart your AX (pull the power for a couple of minuter) and Shut Down the computers on your network. Boot the AX, then restart the computers. Can you connect?

Similar Messages

Print internal error when tring to print PPA document

Hello experts,
    We got a problem when we tried to print out PPA document in HR system using t-code PHAP_ADMIN_PA. The system always shows the message Error when printing: Internal error. And message no: HRHAP00_DOCUMENT160.
    I have searched the forum but I have no idea how can I check and how can I do to solve this problem. Can anyone help me?
    Any help will be highly appreciated.

Hi Joseph,
This error is usually linked to an incorrect configuration of the printer.
Please check the following notes for information on the type of printer supported for PDF
   685571 - Printing PDF-based forms
Check also your ADS settings (or install it if it's not already done as it is required for PDF as well).
The installation steps you can fbe found in ADS Configuration Guide:
http://help.sap.com/saphelp_nw04s/helpdata/en/37/504b8cbc2848a494facfdc09a359b1/frameset.htm
Once installed or if it's there already then please check the following:
Execute the ADS test program "FP_TEST_00" in your system, check whether form is being displayed once you specify the
printer name. Also, could you check in transaction SM59 the ADS status?
In order to print an appraisal form, you need:
1- the Adobe Document Services (ADS) installed and well configured
   on a J2EE engine in your system landscape
2- an appropriate connection called ADS maintained in SM59
ADS configuration guide is available on Help Portal.http://help.sap.com/nw2004s
-> SAP NetWeaver Library -> Technology Consultant's Guide ->Cross-NetWeaver Configurations -> Adobe Document Services ->Configuration.
Please also make sure, that ADS is used on a supported platform. You can check the Product Availability Matrix (PAM) for informationabout supported plattforms for ADS.Link: http://service.sap.com/pam
Notes: 863872, 925741 and 736902 Adobe Credentials
Hope the above will help you solve this error
Thanks
Sarah

I receive a server error when attempting to sign in with an existing apple id to set up a new matchbook air

I have 2 apple ID's, one for an IPAD and the other for an IPHONE. I have just purchased a new macbook air and when setting it up, I receive a 'server error' meesage when attamepting to sign in with either of the 2 pre existing apple id's.
These pre exisiting ID's all work correctly with IPAD and IPHONE.
Everything I have looked up says that I should be able to use either of these apple ID's to set up my new macbook air. I shoud not have to create a new apple ID or change passwords.
I cannot progress with setting up the macbook air without signing in.
How do I fix this?
Help appreciated!

Wow, I found a solution in another thread:
I had exact same error.....
Rebooting - Failed
Logging in to iTunes - Failed
Logging into itunes Store - Failed
Logging into iTunes Genius - SUCCESS I woulnd't have thought it would make a difference but it does Then just log into the 'other' services with iTunes.
Good luck!
I still need to know how to change the name to Ann, though, Mike keeps popping up - and yes, I have changed it under Settings.....

Server Error when attempting to download from Gracenote

When I insert a CD to rip as an MP3, I get a pop-up box indicating "Server error". It won't access Gracenote to get track names. Anyone else having this issue?

HELLO??!
Is anyone giving official support from Apple?
I am on the Macbook Air running OSX 10.7.5 and iTunes 10.6.3 (I do not want to upgrade to 11 because I dislike the GUI).
I have the same problem. All the CDs I'm trying to import are original but I keep getting this "server error" message when getting track names.
WHAT SHOULD I DO?
HELP PLEASE!!!

HT204053 server error when attempting to log into icloud

I am having a problem signing into ICloud from my PC. It continues to say Can't Sign in because of Server Error. Help anyone!!!!!!

Solution 2 from this help article http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html should resolve the problem.

Printer spooler error when attempting to install Acrobat Pro (also Reader)

I tried to install the trial version of Acrobat Pro today. Installation would not complete due to an inability to stop the print spooler.
After this failure to install, I was no longer able to access my printer via the previously installed Acrobat Reader. I uninstalled Reader and attempted to reinstall it, only to discover the same print spooler problem. Neither program will now install.
I am running the latest version of Windows 8. Can anybody help?

Back with more information.
After rebooting I successfully installed Acrobat Reader XI and established that it could contact the printer.
I then tried to install the trial version of Acrobat Pro XI. The procedure was slightly different this time, as this time it went via Adobe Creative Cloud, but the installation failed.
The error report follows:
Exit Code: 7
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s)
----------- Payload: Acrobat Professional 11.0.0.0 {23D3F585-AE29-4670-8E3E-64A0EFB29240} -----------
ERROR: Error 2753.The File 'Aiod.dll' is not marked for installation.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 2753.The File 'Aiod.dll' is not marked for installation.
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603

Photosmart C6180 on wireless network does not respond when attempting to print

Photosmart C6180 successfully installed on wireless network does not respond when attempting to print. All in one is successfully installed on wireless network and SW successfully installed on Windows XP computer yet printer does not print. Get no error message other than document failed to print. HELP!

So gald I'm not the only one. I have been fighting this crappy HP printer for MONTHS also. Everything says a OK goody goody but printer fails to print every two to three weeks.

When attempting to print with HP P2015 cabled to AirPort Extreme, error message is "Network host (name) is busy". What's happening?

When attempting to print with an HP P2015 cabled to an AirPort Extreme, the network won't connect to printer. The Print Que message is "Network host (name) is busy; will retry in (number) seconds." When I delete the file to be printed, the Print Queue screen says "Printer Ready".
More Information:
The printer's Queue Name is Hewlett-Packard HP LaserJet P2015 Series
The Location is "(my name) AirPort Extreme"
URL is "Hewlett_Packard%20%HP%20LaserJet%20P2015%20Series._pdl-datastream._tcp.local./ ?bidi" (for whatever that means)
Driver Version is 18.4
Printer Software is HP LaserJet P2015 Series
The printer is listed as a printer on System Preferences/Print&Fax screen
If I connect the printer cable directly to the iMac, the printer works fine.
Any helpful directions would be greatly appreciated.

I came across an Apple article last modified 6/2/08 (Printer troubleshooting for AirPort Base Stations and Time Capsule). It suggested the old standby, i.e., disconnect the AirPort Extreme Base Station from its power source, turn off the printer, turn on the printer, and reconnect the AirPort to its power source. It worked. I guess disconnecting the AirPort cleared out the network host. Yea.

The operation could not be completed - When attempting to print

I have recently downloaded cutePDF writer in order to print my vbcode into pdfs because my instructor was complaining about how my code looked after copy and pasting it into a word document and then saving as a pdf. after attempting to print several times
i attempted to print to a real printer and that wouldnt work either. i get an error message "The operation could not be completed" and nothing happens. Thanks in advance :).

Hi AaronBootss,
I am afraid that your issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
If you got this issue when you print a pdf document to a real printer, maybe you can contact someone who is familiar with your printer and print operation for help.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Office jet 6700 printer jam error when there is no printer jam

I get a continuous printer jam error when there is no jam present. I have tried connecting and reconnecting. Same error.

Hi @lbrockhurst
Although you are not experiencing a true paper jam, the solutions presented in the following document might help to resolve the issue; A 'Paper Jam' Error Displays on the HP Officejet 6600 e-All-in-One and 6700 Premium e-All-in-One Pri...
As you will see in the document above, paper jam messages are not only a result of physical paper jams;
The following factors can cause paper jams:
Paper loaded incorrectly in the paper tray.
Damaged or dirty paper rollers.
Torn, wrinkled, or damp paper loaded in the paper tray.
The rear access door or two-sided printing accessory (duplexer) might not be closed or is not locked into place.
Paper was added to a stack already in the tray while the HP product was printing.
The tray contains more than one type of paper.
The paper is jammed inside the HP product where you cannot see it.
An obstruction is blocking the paper path.
Torn pieces of paper from a previous jam are stuck in the product.
The tray is too full.
If printing on an envelope, the edges of the envelope are bent.
I have also seen communication hiccups cause such error messages. This may sound silly, but if the issue persists, after completing the steps in the document I provided, let's leave the router on and unplug the power cable (NOTE: Do not reset the router.), then do the same with the printer, and shut down the computer. After a full minute, plug the router back in, wait for it to fully power up, then plug the printer back in and wait for the wireless light to become solid. Once both the router and printer are on, go ahead and turn the computer back on. Doing this will refresh the network connection.
I hope this heps.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

My computer locks up when attempting to print an Adobe Reader XI file. How do I fix this??

My computer locks up when attempting to print an Adobe Reader XI file. How do I fix this??

adobe reader 11.0.10 windows 7 home edition Everything was working fine, but I got a "communication not available error" and rebooted the wifi. The next day, when I went to print, after selecting the number of copies etc, I clicked on "print". The next screen is the progress report "Printing xxx.file.", and nothing happens. The computer is completely lock and I have to reboot. I can print excel and word files, but no pdf files, either from the internet or one of my documents. I have tried saving the internet pages and then printing later, but that doesn't work either. One suggestion was to go to edit, preferences, security enhanced and turn off enable. That worked for one document ( a test) from my computer, but when I tried another file, no go

Exception when attempting to print 2 copies to XPS Document Writer

Using Report Client Model (CRforVS2010 SP2) to attempt to print report. Getting following exception when attempting to print 2 copies of report to Microsoft XPS Document Writer:
The number of copies is out of range for the selected printer
Exception source:
CrystalReports13.CrystalPrintControl.1
Stack trace:
at CrystalDecisions.ReportAppServer.Controllers.PrintOutputControllerClass.PrintReport(PrintReportOptions options)
at Accounting.Framework.CrystalAdapter.ReportPrint(Int32 NoCopies, Boolean Collated, Int32 StartPage, Int32 StopPage) in C:
Denali
Src
Managed Framework
CrystalAdapter
CrystalAdapter.cs:line 3230
The Microsoft XPS Document Writer driver has no problem processing multiple copies. This was not a problem in previous versions of Crystal Reports. Does anybody know how to setup the PrintReport to generate multiple copies to an XPS file?

It looks like the one tracked under ADAPT01608246 as per [KB1672555|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333633373332333533353335%7D.do] - Error: Class not registered - CrystalPrintControl
- Saurabh

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'
Word, and powerpoint application are working fine.
Environment : Windows 7 64-bit, MS Office 2013 64-bit
Steps to recreate
(i) Create new user account and add to any group ( do not log on using this
account)
(ii) runas /user:<new user account> <fullpath>\excel.exe
it will ask password so enter on command prompt
(iii) open any excel document and click File->Print
(iv) verify result (it is failing) it pop ups below error
Error:`Microsoft Excel
No printers are installed. To install a printer click the File tab, and then click
Print. Click No Printers Installed, and then click Add Printer. Follow the
instructions in the Add Printer dialog box.

Sorry for late reply i was not at work
I have a default set excel is still throwing error. Interestingly winword , powerpoint and publisher are working fine. I am able to print from all office applications except Excel.
Probably excel behaves differently from other office applications.
Probably it is a bug in excel
Workaround : Log on to a system once using newly created account then runas excel using this account then print works fine.
It means something in user profile should be configure to run excel print operation. Could you please somebody help what I need to configure in user profile that makes print operation success?

Media out or not loaded correctly when attempting to print since iOS 7 upgrade?

Since ios7 upgrade my mini gives me "media out or not loaded correctly" when attempting tp print to Epson r2400. Apple support directed me through a new setup. It worked for a few days and on it's own reverted back to the original problem.

Since ios7 upgrade my mini gives me "media out or not loaded correctly" when attempting tp print to Epson r2400. Apple support directed me through a new setup. It worked for a few days and on it's own reverted back to the original problem.

Recd following error when attempt to open ebook using ADE 4.0 : "Unable to Download. Error getting License. License Server Communication Problem: E_LIC_LICENSE_SIGN_ERROR" iMac 10.8.5 Chrome Version 37.0.2062.124

recd following error when attempt to open ebook using ADE 4.0 : "Unable to Download. Error getting License. License Server Communication Problem: E_LIC_LICENSE_SIGN_ERROR" iMac 10.8.5 Chrome Version 37.0.2062.124
chat with customer service at book company i purchased file:
"Me: I installed the proper adobe software, adobe digital editions 3.0 (now have updated to 4.0) on my mac running os 10.85 however I am getting the following error code when i try to open the file:
"Error getting License. License Server Communication Problem:
E_LIC_LICENSE_SIGN_ERROR"
Charles P.: Okay, what you need to do unfortunately, is contact Adobe at http://www.adobe.com and they will need to get your license issue resolved.
Charles P.: Is there anything else I can assist you with today?
Me: title of error is Unable to Download
Me: i dont see how that would be an adobe problem?
Charles P.: I understand, but it appears that the reason for the download issue is because of the license error the license is related to the Adobe Digital editions software. I understand how this could be confusing but it's due to the authorization of the ADE software. Adobe would need to correct your account issue with the license
Me: ok but i thought this was a free license from adobe??!! this is just a digital editions reader, right??
Charles P.: That is correct it is a free license but your account has to be associated with one license and yes the Digital edition is a ebook reader that our ebooks use for you to view

Well, just for the halibut I tried opening the book again today and , GLORY BE!, it worked.
Guess it may have taken overnight for Adobe to OK my license to their free ADE software. Also works now using Bluefire app as the reader on my android phone, although it was a pain
to get the book file in the right file folder for bluefire to see it.
I hope that time also heels the issue with all other Error Getting License users.
panman

Printer server error when attempting to print wirelessly

Similar Messages

Maybe you are looking for