Printer works fine from PC but the buttons don't work. Is it time for a new one?
C5180 All-in-One printer scanner copier. Are the buttons on the front supposed to light up? None of them respond except the power button. Any quick fix?
Hi there boatmany,
This article has similar steps that should resolve the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.
Similar Messages
-
Replaced phone but the buttons don't work, and the screen glitches.
I just got a new iphone 4s because the other one I had, the speaker slowly quit working. I got this new one, and the home button and the lock button doesn't always work, maybe 30% of the time. You have to keep clicking it. Then, the screen cuts in half with the negative home screen. I have warranty on my old phone for over another year, but did that warranty carry to this phone? I need help.
Take the iPhone back, show them the problem and get another iPhone. You are covered at least until your original warranty runs out.
-
My Ipad 2 won't reboot. the little circle keeps going round but the buttons don't work. help please.
My Ipad 2 won't reboot. The little circle keeps going round but that's all, it won't boot. nothing happens when I press the button on the top either. Please help.
After you hold the power and home buttons at the SAME time until the Apple Logo appears (ignore the red slider to shut down) then let go of both buttons and you don't need to do anything else. Your iPad will restart all by itself. Just be patient, but leave your iPad alone after the Logo appears.
-
How do I get my Macbook Pro and iphone 5 to sync calendars in 2014? It worked fine in 2013, but the 2014 dates are blank on my Macbook. The all icloud is checked on my phone and the enable icloud account and push are selected on the Macbook.
ThanksDo the events from your iPhone calendar appear on icloud.com? If not, go to Settings>Mail,Contacts,Calendars>Default Calendar (in the Calendars section) and make sure you have selected an iCloud calendar as your default. If you haven't, make this change, then add a new event on your iPhone calendar and see if appears on icloud.com and your Mac now.
-
I've bought a iphone 5c from USA but the headset is not working properly its still in warranty,can i go for replacement of headset??
Since it is only the headset that is the problem and not the iPhone it would be better to just buy a new set and not let yourself be frustrated over it. If you send anything to your sister before the one-year warranty is over, include the headset so she can exchange it at an Apple store.
-
Is anyone there?
I have a softwre update on my iphone 4. but the button to download & Install is not lit for me to push.Over the air upgrades are only active with iOS 5 or later. You will ahve to upgrade using iTunes.
See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
Device iOS Verson
iPhone 1 iOS 3.1.3
iPhone 3G iOS 4.2.1
iPhone 3GS iOS 6.1.x
iPhone 4 iOS 7.0.x
iPhone 4S iOS 7.0.x
iPhone 5 iOS 7.0.x
iPhone 5c iOS 7.0.x
iPhone 5s iOS 7.0.x
iPod Touch 1 iOS 3.1.3
iPod Touch 2 iOS 4.2.1
iPod Touch 3 iOS 5.1.1
iPod Touch 4 iOS 6.1.x
iPod Touch 5 iOS 7.0.x
iPad 1 iOS 5.1.1
iPad 2 iOS 7.0.x
iPad 3 iOS 7.0.x
iPad 4 iOS 7.0.x
iPad Mini iOS 7.0.x
iPad Air iOS 7.0.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS to Version 6.0.x from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
My battery don't work fine... its suck´s, don't work nothing, can't call´s, can't do anything... where is the fixes ?, WHERE ????
I think the fixes got lost, along with your knowledge of spelling and grammar.
-
My wi-fi on my iPhone 4S is not working after updating to ios7 which was working perfectly fine before. It is a few weeks out of warranty now and the Apple store wants me to pay £160 for a new one, are they joking?!
Hi there Juicy Guava,
You may find the troubleshooting steps in the article below helpful.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
-Griff W. -
my iphone 5c screen is popping out from the top right side , can i exchange it for a new one at the apple store ?
If it is still under warranty, and they determine it is a manufacturing defect, they will replace it. Be sure to back everything up before taking it into the Apple Store. That way, if you do get a new device, you will be able to set it up from the backup.
Cheers,
GB -
The sounds are working on my i phone but the ringer will not work...it will only vibrate. I have the volume set at high.
Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new device.
Have you tried ALL the troubleshooting steps? If you have and you're still having problems, then you'll need to bring your phone into Apple for evaluation and possible exchange. -
In the process of exchanging my defunct Iphone for a new one, some important text messages were lost. The messages obviously did not transfer over to my new phone as I had to restore my new phone from a backup performed a few days ago. Is there a special trick that will allow me to somehow enter my cell number, since it is still the same, in order to recover texts that were received in between wiping my old phone and getting a new one?
You can use an iPhone file explorer such as TouchCopy to get the messages off the old phone. But you can't put them on the new phone as messages. You could put them in a pdf file that you could read on the new phone.
Normally when you get a new phone the first thing you should do is transfer the contents of the old phone to it (Transfer content from an iPhone, iPad, or iPod touch to a new device - Apple Support)). Then the problem does not arise. You are even prompted to do this when you activate the new phone. Once you have started using the new phone without doing this it is too late.
To tell Apple your concern go to http://apple.com/feedback. This is a user to user forum; Apple does not read or participate in it. -
I have an iMac and MacBook Pro, both running Snow Leopard at current maintenance levels. I have an HP8500 printer connected via wi-fi. All have been working well until just recently. Now, the iMac cannot communicate with the printer. The printer icon shows offline. The printer is still online to the MacBook. I suspect a related problem is that when I try to access files on the MacBook from the iMac, I get a message that they are unavailable, but re-clicking once or twice to re-try works and the files are accessible. The only problem is that I cannot modify them from the iMac, even though the sharing options are set for update capability.
Resetting the printer and re-booting the iMac don't help.Yosemite is a big problem.
I recommend you factory reset the TC and start over.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Redo the setup from Yosemite.. it needs to be directly involved in the setup to remember anything.
Please use short names.. no spaces and pure alphanumeric. eg TCgen5 base station name. TCwifi as wireless name.
Set password WPA2 Personal security which is pure alphanumeric mixed case and numbers.
Please empty out all the old wireless names from your devices.. reboot them and rediscover the network.
If it still fails tell us. -
Got 2.0 to work now, but the apps don't work i download from store
Howdy All
Managed to get 2.0 working now, constant clicking got me there, but now the apps i have downloaded from the store just don't work like Aim, Paypal etcok so finally got through to an apple care rep. he was very helpful...
Thanx Mark!!!! -
I don't know why but the remote volume buttons wont work on my iPod. When I got it it was on running on 4.3.4 an it worked perfect but no it wont. Please help
Try the standard fixes to rule out a sftware problem:
- Reset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory defaults/new iPod
If still a problem then an appointment at the Genius Bar of an Apple store is in order. -
Plays fine in iMovie but the sound disappears once exported to Quick Time
I read through all the little support things in the iMovie '06 help and nothing worked. No matter how many times I try to export my project to QuickTime everything works but the audio even though I've made sure the audio settings are correct. In iMovie the video plays and the imported song does as well but exporting loses the sound.
What am I doing wrong?Some possibilities:
Check out this thread for a possible solution: http://discussions.apple.com/thread.jspa?messageID=7305234� Perhaps renaming the file would help.
I don't know if ithis has an effect on the file, but why is it saved in documents rather than music or movies?
Also, are you using iTunes to convert the file to .aiff? Here is the procedure from iTunes help:
*Choosing AIFF and WAV custom import settings*
If you use AIFF or WAV encoding, you can use custom settings for greater control over the quality and size of imported files.
To choose AIFF and WAV import settings:
1. Choose iTunes > Preferences, click Advanced, and then click Importing.
2. Choose AIFF Encoder or WAV Encoder from the Import Using pop-up menu.
3. Choose Custom from the Setting pop-up menu.
4. In the dialog that appears, choose settings:
Sample Rate: The number of times per second the music waveforms are captured digitally. The higher the sample rate, the higher the quality and the larger the file size. Don't choose a sample rate higher than the rate used to store the music originally or you'll waste space. CD quality, for example, is 44.100 kHz, so choosing a higher rate when you're encoding from a CD is unnecessary. In general, the best choice is Auto, which uses the same rate as the original music.
Sample Size: The number of bits used to store each sample taken as the music is encoded. The higher the sample size, the better the quality and the larger the file size.
Channels: If you don't have stereo speakers or if your audio files are monaural (mono files are about half the size of stereo files), choose Mono. If you'll be listening through headphones or a stereo system, choose Stereo or Auto. Auto converts monaural tracks into mono files and stereo tracks into stereo files.
Maybe you are looking for
-
Photos won't sync to iPod Touch
I have an iPod Touch 8GB with iOS version 4.2.1 and I'm having an issue with syncing photos. I try to sync a folder of pictures and the statue bar area where iTunes tells you what its doing, it goes through syncing, backing up, and says optimizing pi
-
Allocate-interface to an existing ASA context
We have a active/active context firewall and would like to add an sub-interface to the exisitng context. Can someone share the link on how to do this? All cisco documentation is for creating a context and allocating interface from scratch but I could
-
Hi, I get this error when starting my soa server, has any one see this before? java.lang.ClassNotFoundException: oracle.bpel.services.common.util.GenerateBPMCryptoKey at java.net.URLClassLoader$1.run(URLClassLoader.java:202) at java.security.AccessCo
-
Tick Count Express VI outputs '0' on FPGA target running with Simulated I/O
When I set my target to "Execute VI on Development Computer with Simulated I/O", the Tick Count VIs all output '0 every time they execute. How can I get them to output a progressive count (in the "ticks" instance) or a proper timestamp (in the "ms" i
-
IPhone 5 will not recognise my finger print
My iPhone 5 will not recognise my finger print ?