Printing Attachment List

How can iMail be setup so that when an email is printed, the attachments to the email are listed with filename and size.. as opposed to a quickview of the attachment being printed out??

no, don't know. it may depend on the attachment as right now I have an emial with 5 word documents attached and when printed, each icon shows up with its name and size below it.
sorry to not be of more help

Similar Messages

  • Printing delivery note via attachment list

    Hi all,
    when I print a delivery note in VL02N, it is also archived as PDF in our archive system (SAPERION).
    My problem is, that a print from archive via attachment list is different (e.g. different borders) from that, which i printed at first.
    Is there any chance to get the same output again?
    Regards, Hubert

    Hi,
    T. code for Output for Picking list is VL70
    T. Code for outputs for Deliveries is VL71.
    Hope this is clear.
    Reward if helpful.
    Thanks,
    Praveen

  • Hoy to print image from GOS Attachment List

    Hello all:
    I have to print images attached as JPG format in Generic Object Service Attachment List.
    For Example: One material has several pictures. I need to print all them in a individual material report.
    The report is Smartform.
    Any Idea how to do that?
    Than you very much.
    Ibrahim Andres

    Hi Eray,
    I have come across an similar requirement, Can you please share the solution for your mentioned requirement.
    Thanks,
    Mansi

  • Printing attached to windows workstation - can't print from mac

    Here is my setup:
    I am trying to print to a Canon MF6500 printer attached via USB to a Windows XP Pro computer in a Windows 2003 SBS environment. I enabled Unix printing, set the printer up for sharing and installed the Mac driver on my computer. I went to "add printer," then "windows printing" and found the workstation with the target printer, however nothing was available to select.
    I then added the printer to the server hoping that I could just share it from the server, but I got the same result - no printers to add.
    So as a last ditch effort, I installed the 3rd party App DAVE. I opened the "Dave Printers List" and it actually found the printer, but I could not find the driver now. The Canon driver is in the list of drivers (as I can see it when searching for Bonjour/appletalk printers), but not there when searching for other printers. So I can add the printer, but I can only use a generic print driver.
    Anyway, here is my question: How do I add the printer without using DAVE (if possible) with it's correct driver? If not possible, how do I add the printer using the correct driver with DAVE? Any ideas would be GREATLY appreciated!!
    Thanks

    have you resolved your problem? Please forward me any tips that you may have received.
    I have a new iMac with OS X V 10.4.10 - all software is up to date.
    I have a HP OJ 7680 linked into my airport network through Bonjur. When I try to print, Word (and all other applications) tell me to select a printer, I select the HP OJ 7680 (designated as a Bonjur printer) and my iMac instantly tries to install the printer. After about 5 - 10 minutes the install fails.
    Where can I get help on this? Doesn't apple offer any on-line or phone customer service?

  • Delete and Change options in Attachment list to be disabled

    Hi Experts,
    I am working IS-U. In transaction EC20 when we see any print document, there is an icon for attachment at top. According to my customeru2019s requirement, user should only be able to attach the file, the options for Delete and change should be disabled.
    When I do this through transaction SGOS and change the status as inactive of the service u2018VIEW_ATTAu2019, itu2019s deactivate the attachment list as whole .In this case user is not able to see the attachment also.
    Any suggestion regarding this would be appreciated .
    Thanks,
    Vijay

    Hi,
    use FM with Edit functionality enabled for all fields and
    Create one pf-status with some buttons
    if user presses the button the alv output table should be saved and same table can be used to insert /modify /delete the dbtable.
    and check this link
    [alv list|alv list]
    Regards,
    Nandha

  • Missing "creator name" and "created time" on attachment list in ordrer

    Hi all,
    When printing an order (in VA01, 02, 03) with storage mode: archive only, and then display the document in "Displ.Originals", the creator and creation time are blank (in Attachment list pop-up).
    How to complete these fields?
    Regards,
    Misha

    This project was left aside for a while... but it's now finished!
    Thank you for the answers. It was helpful.
    Here is a step-by-step of what I did (using Adobe Acrobat 9.5.1):
    Open PDF document in Acrobat
    Select Forms -> Add or Edit Fields
    Add two text fields: one called "Today" for the date and one called "Printer" for the printer name
    Close the form editing
    Select Advanced -> Document Processing -> Set Document Actions...
    Then select Document Will Print and Edit
    Paste the following code:
    var f = this.getField("Today"); f.value = util.printd("dd mmm yyyy - HH:MM", new Date());
    var pp = this.getPrintParams();
    this.getField("Printer").value = pp.printerName;
    Save your PDF
    Enjoy!
    The date and printer name field will be automatically updated when you print the document!

  • I keep getting an error message "To open X1100 Series Button Monitor, you need to install Rosetta".  I used to have a Lexmark X1100 printer attached to this Mac.  How can I stop this error?

    I just had a new hard drive put in my IMac and ever since I got it home this error pops up "To open X1100 Series Button Monitor, you need to install Rosetta.  Would you like to install it now?  Two years ago I had a Lexmark printer attached to this Mac.  I'm not sure why this is happening as I believe I have move all Lexmark files to the Trash bin.  Does anyone know how I can stop getting this error?  Thanks.

    Check in System Preferences> Printers to see if the Lexmark is still showing in your printer list. If it is, click it and hit the minus button to remove it.
    If it's not showing, when you trashed the Lexmark software, did you notice if there was an uninstall file? Sometimes just moving unwanted programs to the trash can doesn't get rid of all of the installed software and the software manufacturers include an uninstall option to remove those 'hidden additional files'.
    Check support at Lexmark's web site to see if they offer a solution.

  • Can't print to printer attached to Windows 7 machine

    When I send a document from my MacBook to the printer attached to my Windows 7 desktop, it shows up on the print queue as a document but lags and shows as "spooling". I have yet to get this to work. I successfully networked the computers together for file sharing and whatnot, but printing refuses to work. Like I said, the documents make it to the print queue, but won't actually print.
    Router is Linksys WRT54G2 firmware version 1.0.04
    printer is Cannon MP240
    Mac OS is Snow Leopard version 10.6.4
    Any help would be greatly appreciated. Even if a suggestion doesn't work, thanks for taking the time to reply!

    To print to a Canon inkjet when it is being shared by a Windows computer, you need to use a CUPS-based driver such as Gutenprint or PrintFab. Note that the Canon drivers cannot be used - even the versions that have CUPS in their name.
    Gutenprint is the preferred driver as it is free however the MP240 is too new and is currently not listed as a supported model. So you could look at using a different Canon model, such as the MP220 or some users have found the MP150 to work for their non-supported model.
    If you cannot get any of the alternate Canon models to work correctly then you could try [PrintFab|http://www.printfab.net>. There is a 30 day trial available so you can check that it works before paying the €49. Also your MP240 is listed as a supported model.

  • OfficeJet 8500 Printer attached to Windows XP system via USB prints partial pages

    I have an OfficeJet 8500 printer stationed at the desk of one of my users and is attached to her Windows XP system with a USB cable.  The printer has started to print partial pages and will not complete a full page of text or images, color or black and white.
    I have attempted to reset the printer by removing power from the printer via the power cord, and holding # and 6 while turning the printer on (after reconnecting the power cord, of course).  The alignment process took place after this procedure, but it has not resolved the issue.
    I have not yet upgraded the firmware from what was installed at the factory.
    What might I do?  What am I missing?  Do I need to upgrade the installed driver on the system?  Is the printer able to be salvaged?  It doesn't appear to be hardware, as the portions which print are perfect; I just don't get the entire page.
    Thanks in advance,
    Rob

    The USB to parrallel cable will work just find if you don't mind plugging in the laptop to the printer when required. If you want to modify Win XP to be able to print to an AppleTalk printer follow the instructions below.
    "To install AppleTalk protocol to Windows XP
    Required files: (Get them from any system running Windows 2000 Professional or Server)
    netatlk.inf, sfmatalk.sys, sfmmon.dll, sfmatmsg.dll, sfmwshat.dll, sfmpsprt.dll
    If they can not be found you need to unhide hidden and system files.
    Copy the files to their respective places:
    C:WINDOWS(WINNT)\INF\netatlk.inf
    C:WINDOWS(WINNT)\SYSTEM32\DRIVERS\sfmatalk.sys
    C:WINDOWS(WINNT)\SYSTEM32\sfmatmsg.dll
    C:WINDOWS(WINNT)\SYSTEM32\sfmmon.dll
    C:WINDOWS(WINNT)\SYSTEM32\sfmwshat.dll
    C:WINDOWS(WINNT)\SYSTEM32\SPOOL\PRTPROCS\W32X86\sfmpsprt.dll
    AppleTalk Protocol should now be available under the list of Protocols you can add in Network Connections - Local Area Connections Properties
    This is only good using AppleTalk printers attached to the network. The AppleTalk printer will show up, if it's turned on, under Add Printer-Local printer attached to this computer - create a new port - AppleTalk Printing devices.
    For more info see: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/s agadd_appletalkport.mspx (you do not need to capture the port for the printer to work)
    If you can not get access to these files, make your email address visable in your user profile and I will send them to you."

  • Wanting to share a printer attached to a PC -- help?

    I am sure this has been addressed a gazillion times, but all my forum and KB searches seem to address how to get a PC to share a printer attached to a Mac; I want to do the opposite -- have my Mac wirelessly share a printer attached to a (Windows XP) PC.
    I can't seem to get the printer to show up in the list of available printers on the Mac...

    I just got a MacBook an I am trying to so the same thing. I've gotten pretty close to getting this to work.
    First, you need to set up printer and file sharing on your PC. There are different steps for doing this depending on the operating system on your PC, and whether you are using Simple File Sharing or not. Also, be careful if you have extra firewall software on your PC. Norton Internet Security can cause havoc. Disable it while you try getting the printer sharing set up. You can enable it again later.
    Once you enabled Printer and File Sharing, you need to specifically share the printer on your PC. This is similar to creating a share on a directory.
    Once that is done, go to your Mac, go to the Printer Setup Utility an add a printer. If you don't see your PC printer in the printer browser window, click on More Printers.
    In the next dialog box, select Windows Printing on the top drop-down box, then select Network Neighborhood in the drop-down box below it.
    You should see a list that contains an entry for the network neighborhood name you set on your PC (typically this is defaulted to MSHOME)
    Double click MSHOME (in my example) and you should see the name of your PC. Double click your PC name. You may be prompted for a username and password, if you set one on your PC.
    This should get you almost there. The last step is to select the printer and find the appropriate driver in the resulting list. Unfortunately, the printer list on the Mac is WAY SHORTER THAN WHAT YOU WILL FIND ON A PC. If you have any older printer (like me), you may not find the proper driver in the list. Try the generic driver and see if it works.

  • Printing 'Printing from a Windows XP PC to a printer attached to an Airport

    I have a new HP OFFICEJET J6480
    Hooked into my airport express (USB)
    Using my MacBook Air it does show the printer and shows it as idle
    when I hit print on a doc. I want printed I get the error message that
    "Printer is off line"
    Any clue why this is happening or what I may have set up wrong
    Thanks in advance

    I have found that many have had great luck with the tips from
    http://tech.ifelix.net/1004.html
    OK I have tried;
    Printing from a Windows XP PC to a printer attached to an Airport Extreme Base Station or Airport Express
    http://tech.ifelix.net/1004.html
    When I set up I breeze through it UNTIL I get to
    :CREATE NEW PORT" I select the Standard TCP etc then I get the
    "Windows won't let you create it as it already exisits"
    I get lost when you say
    "if you have already created the port in a previous attempt then use the drop down list to select the previous port"
    BTW the printer in question is a new HP model OfficeJet J6480
    I have no clue what the previous port was ?
    Any tips ?

  • Problem printing to printer attached to a pc over home network

    I have a home network with two computers, a Dell running Win XP and a new iMac running Leopard. I have Fusion installed on the Mac running a virtual PC on WinXP as well, so I effectively have 3 computers. I had an old HP printer attached to the Dell that both the Mac and its virtual PC could see and print to fine over my network. I had to replace the printer and now have a Canon MX700 attached (by USB) to the Dell, and am having trouble with remote printing. I was able to "add" the new printer to both the Mac and its virtual pc, but only the virtual pc is able to print successfully. When I try printing from the Mac applications, using the driver for the MX700 printer found during the add printer setup, I get an error message. I then tried a new setup with a generic (Gutenprint) driver, and the printer was spitting out blank pages. Then I downloaded another driver from Canon's website for OS X 10.5, and it still didn't work. (I am not sure if I was supposed to uninstall the previous drivers first, and if so,I don't know how to do that since I am still new to the Mac environment. I just am assuming that the new drivers take over for the former one.) I assume that the problem is a driver problem and not a network problem since the virtual pc on the Mac works fine and my old HP worked fine with the same network setup. Any help?

    gosox13 wrote:
    Thank you again for sticking with me on this. Frankly, I was very surprised when the Canon did not work even when I carried it downstairs and attached it directly to the Mac by USB. I used the installation disk, which said it installed successfully (after several tries where it kept getting hung up after installing the drivers, and showing 0% completed, requiring me to use force quit to get the setup to stop each time). But as I explained in my prior post, the Mac never found the printer even after the supposed "successful" install.
    This is typical when there are too many different versions of the driver residing on the Mac. I will explain my procedure to remove all the Canon stuff at the bottom of this post.
    I then downloaded the Mac OS driver from the support page for my printer on Canon's website and ran that driver, but still no recognition. But I am willing to keep trying. I had looked at the PrintFab driver too (which I learned about from one of your other posts), but they are expensive and I probably could buy another printer for the cost of that driver. So I don't think that is an option.
    Agree with you re the PrintFab. That is why I think the direct network connection would be best.
    You suggest that I try another Gutenprint driver from the Canon list, which I guess I can randomly do, but I noticed that a number of the models listed show the driver as 5.2.3 (the same numbers as the generic one I tried)--does this meand they are all the same? Can I just keep downloading and installing more drivers without removing any?
    It is not another version I need you to try. Using the same version, I suggest you try some of the other models that are included with the Gutenprint driver. Ideally, it would be good to know which model of the included Gutenprint drivers uses the same ink tank setup as your MX700. For example, if the MX700 uses BCI8 Blk and a BCI5 Blk and the three 8 series colour (Cyan, Magenta and Yellow), then selecting a model that uses the same setup might work for you. If you check a Canon web site, it would tell you what tanks are used by a certain model that is available within the Canon list.
    I am willing to consider the network install of the printer, and that would be a good way to go, but I find Canon's instruction for network installations that came with the printer (which does not appear to consider mixing Macs and Pcs since there are separate instructions for both) a bit confusing. The basic installation of the printer on the network seems easy enough to follow. It is the further instruction for doing something to the "card" for each computer that will be using the printer on the network that I find confusing. I don't know what they are talking about. I certainly don't want to mess up my network connections. Do you know of any better instructions for setting this all up?
    The setup is easier than the manual suggests. With the printer connected via USB, you open the Utilities application and select the Network tab. However this does require that you can get the printer to work when connected via USB, so we have to achieve that first.
    Again, thank you very much for all your help. (Incidentally, I also discovered I can't use the fax feature of the printer because we have a two-line phone line and when I plug the phone cord into the printer and then out to the phone it eliminates the second line, no ringtone. There is no setting for this on the printer that I can find. But I can live without the fax, just another source of annoyance with this printer).
    That would suggest that there is a link from the first phone to the second. Unplugging the phone cable to connect to the fax has broken that loop. You could easily get the phones rewired to suit the fax, but again it costs money so it might not be worth it.
    Here is my procedure for repairing faulty installations of the Canon PIXMA drivers.
    1. Open System Preferences > Print & Fax. Highlight the Canon printer in the Printer list and click the minus ( - ) button. [You may not have to do this step]
    2. Hold Control key and click in the empty Printers list. Click on Reset Printing System.
    3. Close Print & Fax
    4. Go to Library > Printers > Canon and delete the contents of the BJPrinter folder.
    5. Go to Library > Receipts and delete the Canon driver package file, if one exists. The file name will show Canon MX700 xxx.pkg
    6. Go to Library > Preferences and delete the Canon folder.
    7. Go to HD > Users > Shared > Canon and delete the BJPrinter folder.
    8. Empty the Trash
    9. Unplug the Canon USB cable and restart the Mac
    10. Install the latest version of the Canon driver. Looking at the Canon AU web site it is v6.9.3
    11. Once the driver installation is complete, go to Applications > Utilities and open Disk Utility. Run the Repair Disk Permissions option.
    12. Reconnect the Canon USB cable. Then open Print & Fax and see if the Canon printer is listed. If it is, try a test print.
    13. If the printer is not listed, click the plus ( + ) button.
    14. Select the Default view and select the Canon printer connected via the USB port. The Print Using menu should automatically change to Canon IJ Printer.
    15. Click Add to add the printer.
    PaHu

  • In Ical, can you print a list view calendar without notes?

    In Ical, can you print a list view calendar without notes?

    cj,
    After selecting Calendar>File>Print...> I am presented with a Print selection pane which offers among other choices, a "List" selection:
    What do you see?

  • Show originally filename in attachment list (generic object services)

    Hello everybody,
    does anybody know, if it is possible to show the originally filename of a document in the attachment list of generic object services?
    If I add more than one document for the same document type in generic object services, I'm not able to distinguish the documents.
    When I want to save an attachment to local PC, SAP offers me the originally filename as default. Therefore, the filename has to be saved somewhere...
    Thanks for any help or ideas in advance,
    Peter

    Richard,
    Your using the wrong object, I don't have access to an SAP system right now, so I can't tell you what the correct object is, but when it's configured correctly in OAC3 it will not be grey out.  Best thing to do it see what the object the program is publishing.  This is what GOS is looking for.  IFARCH21 is not the answer, unless your using workflow

  • In Attachement List Services for Objects White Screen when I Display a Note

    Hi Expert,
    Need your assistance.
    I am trying to view a note in Vendor Master data but no information provided and I can only see white screen. Below are the steps that I performed:
    1. Go to FK03
    2. Open a Vendor
    3. Click the Services for Objects
    4. Attachement List
    5. Select a Note
    4. Display it
    5. Pop up window appreared and no information occurred. Only White screen
    Is there's a missing configuration, plugin, or data in my SAP system/workstation?
    I tried to login to other PC and it worked.
    Just wondering what is missing on my computer.
    Your response will be helpful.

    Hey,
    I have the exact same problem as you have described. I also used my ipod as a watch but starting from today, whenever I unlock it the screen turns white until a reset is done. Even a factory reset through itunes didn't fix it.
    Have you found any solution?
    Bah, this is annoying.
    //Gubbar

Maybe you are looking for