Printing changes from a compared document

I have a compared document which on the screen shows the differences in different colors and highlights. But when I print the document the colors do not show up. Is there a setting that allows for printing the changes in color?

Using Pages ’09 v4.1, I can only duplicate your export results if I choose to ignore that the Pages numbering default is to continue from previous — thus your source would need to show a 1 - 4 number series before export. You can rectify this, by positioning the pointer at the 3 list item, and choosing Start at 1, as shown below. When used in this manner, what you see, is what you get in the resultant Word .doc document.
The other approach is to just type “Old Business” followed by a return. Then, without using the List tab from the Text Inspector, simply type your own numbered items and content followed by a hard return. Now, you control the numbering yourself. In kind, “New Business” would follow, again with purposely typed number sequence. That exports to Word .doc nicely too. Doesn't matter whether you have Automatically Detect Lists enabled in Pages preferences or not.

Similar Messages

When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been. How do I do this without the document changing?

When I share a pages document as a PDF (via e-mail) all the pictures change from the original document, most are missing with just a few of them repeated in the spots where others had been. How do I do this without the document changing?
I need to be able to send it to a PC in order to print it.

Hard to say what is happening without examining the file.
If you like click on my blue name and email me both the .pages file and the the .pdf you have made from it.
Peter
ps It would help to say what version of Pages you are using and on what you are running it. iOS or Mac and what version.

How do I change an hp officejet j6400 printer change from color to black and white? I have a Mac 10.8 OX system

How do I change an hp officejet j6400 printer change from color to black and white?
I have a Mac 10.8 OX system

Hi JasperNM,
You may access a card within the cart reader by mapping a network drive to access it, then you may transfer the fies to your Mac.
First locate the printer IP address as following:
Follow these steps to print a Wireless Network Test Report, the IP address will be listed within that report:
On the control panel, press the Setup button ( ).
Press the Right Arrow button ( ) to scroll to Network Setup , and then press the OK button.
Press the OK button to select Print Network Settings .
Press the Right Arrow button ( ) to scroll to Wireless Test Report , and then press the OK button. The Wireless Network Test Report prints.
Now map a network driver by following the steps below:
Click the Finder icon on your Mac.
Click the Go menu.
Click on Connect to Server.
In the Server Address field enter “smb://ipaddress of the printer” and click on Connect.
You will be prompted to enter the password. leave it as is and click on Connect.
The Memory card will be mounted as a disk in the Finder.
Shlomi

Document user status not changed from follow-up document

Hi gurus!
My task is to set new user status of primary document (service order) from follow-up document (task) after follow-up document is created.
To do this I've created Badi-impl. of ORDER_SAVE Badi and in PREPARE method when saving newly created follow-up task I'm setting new service order user status using 'CRM_ORDER_CHANGE_STATUS' function. sy-subrc = 0 and, moreover, when in SAP GUI I'm pressing "Back" button I see new user status in service order. But after I'm pressing "Change" or re-open the service order - I see the old user status, so nothing happens at all.
Why could it be?
Thanks in advance.
Best regards,
Alexander Kirillov

Hello Szymon,
The solution is:
1. CALL 'CRM_STATUS_CHANGE_EXTERN_OW'
2. If ok - CALL 'CRM_STATUS_SAVE_OW' passing relevant header/ item GUID
Regards,
Alexander
Edited by: Alexander Kirillov on Jul 17, 2009 6:47 PM

Icon changing from Application to document!

Well i've never done anything like this before... but I guess I'm still a little new to Macs in general.
Anyway, the other night I was changing some things around on the Dock... and I accidentally dragged my MS Word Icon into the Application next to it on the dock (which just happened to be Snes9x the Super Nintendo emulator... which I wouldn't reccomend to anyone by the way).
Once dragged in the emulator opened and of course went haywire so I immediately exited and shrugged it off.
However, today when i went to open MS word from the dock (and later even from inside my App. folder) it again opened in Snes9x. I clicked on Get Info for MS Word from inside the App. Folder and it is now a document! AHH!
The only way I can get Word to work now is by opening an already saved Word Document. But I can no longer just start word up normally.
Please, if you can, tell me how to restore my Word App. back to how it should normally behave.
Thank you,
ThomJohn
Extra Info:
I have already deleted Snes9x in hopes that that might fix the problem... but alas, no success.
The icon for Word is now just a blank white document. (it was the Snes9x document icon before i deleted Snez9x)
iMac G5 Mac OS X (10.4.3)

Go to your Word application file and do GetInfo on it. In General it should say Kind: Application. If it doesn't move down to the Name&Extension section, and add the .app extension, so it says Microsoft Word.app. Or you could rebuild the LaunchServices database and caches, but I think adding the extension is easier.
Francine
Francine
Schwieder

Print quality from Photoshop compared to Lightroom

Does Photoshop always convert the adjusted RAW image to a jpeg for printing, while Lightroom always prints as a Raw file after making adjustments?

Video demo Automaticly Populate a 911 Photo Collage Template
Photo Collage Toolkit UPDATED Made Rotate for Best Fit an option in PasteImageRoll.jsx Edit to customize your default settings.
Photoshop scripting is powerful and I believe this package demonstrates this.
The package includes four simple rules to follow when making Photo Collage Template PSD files so they will be compatible with my Photoshop scripts.
The Four Rules
Size the photo collage templates for the print size you want - width, height and print DPI resolution.
Photo collage templates must have a Photoshop background layer. The contents of this layer can be anything.
Photo collage templates must have alpha channels named "Image 1", "Image 2", ... "Image n".
Photo collage templates layers above the background layers must provide transparent areas to let the images that will be placed below them show through.
There are twelve scripts in this package they provide the following functions:
TestCollageTemplate.jsx - Used to test a Photo Collage Template while you are making it with Photoshop.
CollageTemplateBuilder.jsx - Can build Templates compatible with this toolkit's scripts.
LayerToAlphaChan.jsx - Used to convert a Prototype Image Layer stack into a template document.
InteractivePopulateCollage.jsx - Used to interactively populate Any Photo Collage template. Offers most user control inserting pictures and text.
ReplaceCollageImage.jsx - use to replace a populated collage image Smart Object layer with an other image correctly resized and positioned.
ChangeTextSize.jsx - This script can be used to change Image stamps text size when the size used by the populating did not work well.
PopulateCollageTemplate.jsx - Used to Automatically populate a Photo Collage template and leave the populated copy open in Photoshop.
BatchOneImageCollage.jsx - Used to Automatically Batch Populate Collage templates that only have one image inserted. The Collage or Image may be stamped with text.
BatchMultiImageCollage.jsx - Used to Automatically Batch Populate Any Photo Collage template with images in a source image folder. Easier to use than the interactive script. Saved collages can be tweaked.
BatchPicturePackage.jsx - Used to Automatically Batch Populate Any Photo Collage template with an image in a source image folder
PasteImageRoll.jsx - Paste Images into a document to be print on roll paper.
PCTpreferences.jsx - Edit This File to Customize Collage Populating scripts default setting and add your own Layer styles.
Documentation and Examples
Optional templates 8.5x11 - 16MB
Optional templates 8x10 - 51KB
Optional templates 11x14 - 23MB
Optional templates 12x12 - 12MB
Optional templates 13x19 - 37MB
Optional templates 16x16 - 4MB
Optional templates 16x20 - 91MB
Optional templates 20x24 - 125KB
Optional templates Multi-Image - 113MB
Optional templates One-Image - 106MB
Optional templates PhotoBoard-11x14 - 231KB

6280 All-in-One printer - changing from USB to Ethernet connection - error - can't find the printer

I am trying to reinstall my C6280 All-in-One printer from the product CD - my original installation was for a USB connection, I would now like to reinstall to an Ethernet connection for use on our wireless nework. I have gone through the HP -Installing the Product Software in Windows XP for a Wired (Ethernet) Network Connection - instructions but keep getting the error message - Can't locate the Printer. I have connected the ethernet cable in the ethernet port of the computer and the router (Airlink 101). Any suggestions on what I might be doing wrong?
This question was solved.
View Solution.

Hi,
You can use the following link to setup the printer over a wired n/w.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01708573&tmp_task=setupCategory&lc=en&dlc=en&cc...
Just to confirm..Make sure that you connect the "Printer and Router using the ethernet cable"
To make sure that your printer is found during the installation, after connecting the ethernet cable, make sure that your printer is getting a valid IP address.
Setup Menu--Network--View Settings--Display Wired Summary.
Although I am an HP employee, I am speaking for myself and not for HP.

Changes from a Pages document to a DOC file..additional information

The iMac is an OSX version 10.8.5, Pages is 09 version 4.1
e.g. writing minutes of a meeting in Pages below:
Old Business
1.
2.
New Business
1.
2.
After conversion to DOC file this is what it looks like:
Old Business
1.
2.
New Business
3.
4.

Using Pages ’09 v4.1, I can only duplicate your export results if I choose to ignore that the Pages numbering default is to continue from previous — thus your source would need to show a 1 - 4 number series before export. You can rectify this, by positioning the pointer at the 3 list item, and choosing Start at 1, as shown below. When used in this manner, what you see, is what you get in the resultant Word .doc document.
The other approach is to just type “Old Business” followed by a return. Then, without using the List tab from the Text Inspector, simply type your own numbered items and content followed by a hard return. Now, you control the numbering yourself. In kind, “New Business” would follow, again with purposely typed number sequence. That exports to Word .doc nicely too. Doesn't matter whether you have Automatically Detect Lists enabled in Pages preferences or not.

Changes from a Pages document to a DOC file "re numbering" ..additional information

The iMac is an OSX version 10.8.5, Pages is 09 version 4.1
e.g. writing minutes of a meeting in Pages below:
Old Business
1.
2.
New Business
1.
2.
After conversion to DOC file this is what it looks like:
Old Business
1.
2.
New Business
3.
4.

Using Pages ’09 v4.1, I can only duplicate your export results if I choose to ignore that the Pages numbering default is to continue from previous — thus your source would need to show a 1 - 4 number series before export. You can rectify this, by positioning the pointer at the 3 list item, and choosing Start at 1, as shown below. When used in this manner, what you see, is what you get in the resultant Word .doc document.
The other approach is to just type “Old Business” followed by a return. Then, without using the List tab from the Text Inspector, simply type your own numbered items and content followed by a hard return. Now, you control the numbering yourself. In kind, “New Business” would follow, again with purposely typed number sequence. That exports to Word .doc nicely too. Doesn't matter whether you have Automatically Detect Lists enabled in Pages preferences or not.

Default Workspace changed from usual My Documents area

No big deal, but why has the default workspace location (Windows platform) been changed?
Shouldn't it be C:\Documents and Settings\Flex Developer\My Documents\Adobe Flash Builder Plug-in Beta 2\?

Yes. Agreed. But all previous Flexbuilder releases (betas and full releases) have always had their default workspaces within the "My Documents" folder.
It just threw me a bit when I created a flex project (accepted the default project file location) and it wasn't where I thought it would be. Its usually the My Documents folder so I just wanted to know why change? Thanks

I'm trying to print an Ancestry document from an iPad 2 using air print onto a Canon 5350 (one of the printers ok'd by Apple) I am unable to change the print orientation from portrait to landscape. That is I change it in printer settings but no use.

I'm trying to print an Ancestry document from an iPad 2 using air print. The printer is a Canon MG5350 (on the Apple approved list) I have no difficulty printing but only in portrait format. I've tried changing printer preferences from my computer but even though the Canon accepts the changes it will not print landscape - can anyone advise please?

Hi,
How do you connect the printer to the XP machine ? If USB, you need to make that machine as a Print server. Please try this:
http://techtips.salon.com/make-windows-computer-print-server-11914.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can I change the printing setting from head to toe to head to head, to print a pdf document

Hi everyone, I'm printing a booklet from a pdf document. I have used the two-sided option but it reverses the position of the second page.
How can I set it up head to print what you will call in a pc enviroment: head to head?
Thanks,

Terence,
perhaps Dukeasooke is using mixed language settings like me.
I found that changing "Measurements Units" did not suffice, if the region is still set to Germany. I had to actually set the region in the Language & Text preferences to a country that uses "US" units in addition to ensuring that the "US" units were selected. Also, with Mavericks it is essential to restart the system before launching iPhoto again after changing "Language & Text" preferences, or they may not take.
-- Léonie

How do I accept/reject green/red changes in a FM CMP Compare Document

I am working in FM 11 and needed to merge one file that two writers worked on at the same time with different sections of that file updated. I used the FM Utility > Compare Documents. The result CMP file showed me the inserted text in bright green and the deleted text in red. How do you accept/reject these changes? My workaround is to retype what I wanted to keep and select and delete text I wanted to delete.
I also tried to use SVN update to merge the files, but SVN didn't seem to be able to merge my two files (even though SVN merged a text file that user 1 UPDATED before they COMMITTED their change. The UPDATE merged the changes from writer 1 to the working copy from writer 2 without disturbing writer 2's changes. Then writer 2 was able to COMMIT. But this only worked on a TXT file and did not work with FM files. With FM, SVN just would not let writer 2 UPDATE if his copy was not in sync with the committed copy.
Ideally I would like to be able to merge changes on the same file from two writers who updated different sections. Any suggestions? Thanks.

Another approach:
FrameMaker uses the conditions Inserted and Deleted to mark inserted and deleted text in the CMP file.
In the Search/Replace dialog select the Deleted condition for deleted text to search for.
Leave the Replace box empty.
Then search for the Deleted condition and either replace (i.e. delete the text) or leave it as it is.
After this search/replace the remaining text with the Deleted condition is correct. Therefore delete this condition without deleting the text.
Then do the same with the Inserted condition for inserted text. Either delete this text or leave it as it is.
Then delete this Inserted condition.

How do I change what Firefox opens documents with so I can print them?

I used to print documents for work. The would show up in separate tabs across the top. I click on it and print. Now all the documents go to an arrow on the side and when Ipull them up they are in wordpad and jibberish. please help.

Could you describe this in a little more detail?
First, are you opening PDF documents from a website? If Firefox is automatically downloading them instead of displaying them, you may be able to change that setting. Please see this article for more information: [[View PDF files in Firefox without downloading them]].
Second, instead of clicking items on the download panel to open them, try clicking the folder icon on the right to open the folder they're in with the file highlighted. What kind of file does Windows say it is? If you right-click the file, do you have the option to open it in another program?
Third, if the problem comes after printing, make sure the checkbox for "Print to file" is NOT selected in the print dialog.

Change printing format from landscape to protraite

user is trying to print billing Document
How to change printing format from landscape to protraite from SAP level
Thanks in advacne.

Hi,
Check the attributes of the smartforms or sapscripts.
You can give the option for landscape or potrait format.
For sapscript, the option is available in the basic settings tab.
For smartforms, the option is available in the output options in the page window.
Regards,
Ankur Parab
Edited by: Ankur Parab on Dec 22, 2009 5:43 PM

Printing changes from a compared document

Similar Messages

Maybe you are looking for