Printing going to spool request

Hi
I tried to take print out for my excise invoice through (J1IV), It always going to spool request and not to printer which i have specified.
I checked with the settings in application  V1 jexc condition type, it is set with print immediate.
Rgds
Srini

Go to SU01 and Check in Defaults tab Whether Default Printer is assigned and Output Immediately Option is Marked.
If you know Spool Request Number go to System / Services / Output Control Or SP01 and Here you can take print out.
Regards,
Ashok

Similar Messages

  • How to get SapScript and Smartform printed in one spool request?

    Hello experts,
    I want to print the production order package in one spool request.
    Print program consists of Smartform and SapScript.
    First page is in landscape format with barcode(Smartform) and the rest is in portrait format(Sapscript).
    In SAP documentation is written that it is possible for several Smartforms to be printed in one spool request.
    Is it possible for 1 Smartform and 1 SapScript called from a single program to be printed in one spool request?
    I have tested it with calling first the Smartform control-no_close= 'X' without success.
    Can anyone tell me if this is possible and how?
    Thank you.
    Kind regards,
    Danijela

    Hi
    In the driver program .
    *"Selection screen elements............................................
    SELECTION-SCREEN BEGIN OF BLOCK block  WITH FRAME.
    PARAMETERS:
    p_script   RADIOBUTTON GROUP rad1,
    p_smartform RADIOBUTTON GROUP rad1,
    SELECTION-SCREEN END OF BLOCK block.
    *"Selection screen elements............................................
    SELECTION-SCREEN BEGIN OF BLOCK block1 WITH FRAME.
    PARAMETERS:
    p_single RADIOBUTTON GROUP rad2,      " All the spool request
    p_ind    RADIOBUTTON GROUP rad2.
    SELECTION-SCREEN END OF BLOCK block1. " Single spool request
    If p_script EQ 'x'.
    w_form = 'Y_SCRIPT'.
      Elseif p_smartfom EQ 'X'.
       w_form = 'Y_SMARTFORM'.
    ENDIF.
    call function 'SSF_FUNCTION_MODULE_NAME'.
    Call function 'SSFCOMP_OPEN'.
    w_control-no_open   = ' '.
        w_control-no_close  = ' '.
    *"Single spool request..................................................
        IF p_single EQ 'X'.
          w_control-no_open   = 'X'.
          w_control-no_close  = 'X'.
        ELSE.
    *"Individual spool request.............................................
          IF w_flag NE '1'.
            w_control-no_open  = 'X'.
            w_control-no_close = ' '.
            w_flag = 1.
    CALL FUNCTION '    '-----> smartform function module.
    CALL FUNCTION 'SSFCOMP_CLOSE'.
    Regards,
    Sravanthi

  • All Labels in the Smartform  should be printed under one spool request ?

    Hi All,
    I need to print the labels with some data .At a time I have to print 10 labels with the same Spool request. I have required data in one internal table .I am looping the internal table and printing the label.In this case every time control leading to Print prview, and when i click on PRINT button then only It is leading to the Spool.For each print it is creating a new spool .
      But My requirement is , I need all the labels should be printed under only one spool .And I can see the print preview only once , and  if I click on print  button 10 labels(depending on the records in internal table) should be printed .Cotrol should not come again to the Print popup .
    Thanks,
    Suresh Kumar D.

    Hi,
    As per your requirement, if you want to print 10 labels, in same spool request, design your smart form like that,
    I mean design 10 labels in your smart forms.
    I hope this is easy solution.
    Regards,
    Sreenu.

  • Best practice for schedule printing of spool requests

    Hi there,
    I am searching for a method / best practice how to schedule the printing of different spool requests.
    The following situation:
    A lot of different spool requests are generated in the night, but they should be printed at a specific time in the morning. So I am searching for a method to get the spool requests and print them to a specific printer at a specific time by job.
    Thanks ahead,
    Bernd

    I found a (very old) SAP program RSPO0065 that seems to do just that. However it does not allow overriding the print paramters, so the actual jobs need be scheduled with the correct parameters, most notably the desired printer.
    Thomas

  • Spool request printing unlimited number of copies

    Hi Experts,
    I have a Z transaction which uses SAP Script for printing. There is a peculiar problem with this. It is printing copies with out any limit. It is continously printing although the spool request is showing only 1 request in the spool attributes. The same form is getting printed multiple times.
    I need your help guys....!
    Regards,
    Arun

    Hi Nagraj,
    Thanks for the reply...i have checked in VV33 as well..but there is no output type defined in that transaction which is being triggered in my case.
    still trying for the fix.....any how hoping that this is due to some configuration problem with output types or the printer....
    Regards,
    Arun

  • SCRIPT: all first pages has one spool request

    Hi Friends,
    i've copied the program RFFOUS_C and form F110_prenum_chk as  'Z"
    My requirement is given below,
    Bottom of the bond sheet has cheque and top of the page has remittence details(line item, per page has 20 line item)
    If the remittence details is exceeds in the first page then it goes to the second page(now its working fine)
    if the user gives the bulk cheque printing then all the first page should print under one spool request and all the second page should print another one spool request.
    Is it possible in ZRFFOUS_C program. if it is possible where we can change the logic.
    Thanks in advance,
    Vallamuthu.M

    Sure it is possible. If the title, prefix and suffix and suffix2 are same, printouts go to the same spool.
    The rest is just a bit of thinking and clever usage of START_FORM and END_FORM.

  • Display all sales order's smartform output in one spool request

    Hi,
    If suppose user has given sales order number from 01 to 14 then the output of all sales order should come in one print priview of spool request. How to do it?
    Please help.
    Thanks in advance,
    Rgds,
    Madhuri

    Hi Madhuri,
    Call open form write form and close form in loop so that till sales order remains in the loop the form will continue to print. In this way all sales order in internal table will print in the same spool.
    Hope this will help you.
    Regards,
    Vijay

  • Adobe form is going to Spool directly want a print preview

    HI Experts,
    I have created a class where I am calling a standard Material document print form WOST_WSGM_MATDOC_PDF but it is directly going to spool.
    NOTE : I am calling this class method in one of my POWL Feeder class which is linked with standard GR print application and I want it to be previewed for user to save.
    Please refer the code below.
      DATA iv_funcname TYPE  funcname.
      CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
        EXPORTING
          i_name              = 'WOST_WSGM_MATDOC_PDF'"gc_mat_doc_form_name
        IMPORTING
          e_funcname          = iv_funcname  .
      DATA iv_outputparams TYPE  sfpoutputparams.
      CALL FUNCTION 'FP_JOB_OPEN'
        CHANGING
          ie_outputparams = iv_outputparams
        EXCEPTIONS
          cancel          = 1
          usage_error     = 2
          system_error    = 3
          internal_error  = 4
          OTHERS          = 5.
      IF sy-subrc <> 0.
    Implement suitable error handling here
      ENDIF.
      DATA fp_docparams TYPE sfpdocparams.
      DATA fp_formoutput TYPE fpformoutput.
    Now call the generated function module
      CALL FUNCTION iv_funcname
        EXPORTING
          /1bcdwb/docparams  = fp_docparams
          mat_doc_header     = es_mkpf
          doc_type_txt       = es_t003t
          vendor_data        = es_lfa1
          plant_data         = es_t001w
          move_plant_data    = es_t001w_move_plant
          mat_doc_item_tab   = et_mseg
          mat_doc_printgrgi  = et_printgrgi
        IMPORTING
          /1bcdwb/formoutput = fp_formoutput
        EXCEPTIONS
          usage_error        = 1
          system_error       = 2
          internal_error     = 3
          OTHERS             = 4.
      IF sy-subrc <> 0.
        CALL FUNCTION 'FP_GET_LAST_ADS_ERRSTR'
          IMPORTING
            e_adserrstr = ls_adserrstr.
      ENDIF.
    Close spool job
      CALL FUNCTION 'FP_JOB_CLOSE'
        EXCEPTIONS
          usage_error    = 1
          system_error   = 2
          internal_error = 3
          OTHERS         = 4.
    When  I am running this class individual then I am getting the print preview but when I am running it through portal by calling it in the feeder class then It is going directly to SPOOL request.

    try passing PREVIEW field  "X" in  FP_JOB_OPEN.
    Uma

  • Spool requests are being sent the the B9 printer queue(RSNAST00).

    Hi gurus,
    has anyone found a fix for this issue? i'm currently experiencing the same issue and would like to know how i can fix this..
    Spool requests are being sent the the B9 printer queue. Most spool requests are for one page, when there are spool requests for multiple pages these spool requests take longer to create, in the meantime, other spool requests that are single pages are going to the printer queue. This creates and "out-of-vendor-order" issue during printing.
    The out of vendor order sequencing creates a significant level of work effort for the business users to resort the printed copies in order to prepare the documents for mailing. A change is required to eliminate this manual effort.
    Development has indicated an enhancement could be made to the RSNAST00 program where only those print jobs for application "MR" with transmission "1" (for print) would be gathered in groups of "X" number of documents to create one spool, prior to creating the spool, a check would be made to see if the next document was for the same vendor, if so the next document/s would be included in the same spool, when a new vendor was found, a new spool would be created.
    To temporarily fix the issue the jobs have been placed on "no execute" and the support team is identifing the chargebacks and RTV created during the week, manually running the RSNAST00 program in groups of 500 - 800 documents, ensuring all doucments for a vendor a sent in the same spool request.

    Post Author: Stephen@Azzu
    CA Forum: General
    Nobody know the answer to this one? Stephen@Azzu:Here's a good one...I'm using Crysal Reports XI (fully service packed) and the reports I have created are being used in a VB.Net application. I have no problems whatsoever in printing the reports, everything is fine. However, when the report is sent to the printer, the printer queue displays 'document' as the, err, document name. I'd like it to say something more relevant, such as the document number the user selected.So I've tried setting the ReportDocument.Name but wait, it's read only!? How about the summary info? No change. Filename? No change either. I've browsed the internet, searched the knowledge base and found nothing. So my question is this...How do I get the printer queue to display an appropriate name for my document?Stephen

  • Spool requests are being sent the the B9 printer queue.

    Hi gurus!
    has anyone found a fix for this issue? i'm currently experiencing the same issue and would like to know how i can fix this..
    Spool requests are being sent the the B9 printer queue. Most spool requests are for one page, when there are spool requests for multiple pages these spool requests take longer to create, in the meantime, other spool requests that are single pages are going to the printer queue. This creates and "out-of-vendor-order" issue during printing.
    The out of vendor order sequencing creates a significant level of work effort for the business users to resort the printed copies in order to prepare the documents for mailing. A change is required to eliminate this manual effort.
    Development has indicated an enhancement could be made to the RSNAST00 program where only those print jobs for application "MR" with transmission "1" (for print) would be gathered in groups of "X" number of documents to create one spool, prior to creating the spool, a check would be made to see if the next document was for the same vendor, if so the next document/s would be included in the same spool, when a new vendor was found, a new spool would be created.
    To temporarily fix the issue the jobs have been placed on "no execute" and the support team is identifing the chargebacks and RTV created during the week, manually running the RSNAST00 program in groups of 500 - 800 documents, ensuring all doucments for a vendor a sent in the same spool request.

    Spool requests are being sent the the B9 printer queue. Most spool requests are for one page, when there are spool requests for multiple pages these spool requests take longer to create, in the meantime, other spool requests that are single pages are going to the printer queue. This creates and "out-of-vendor-order" issue during printing.
    The out of vendor order sequencing creates a significant level of work effort for the business users to resort the printed copies in order to prepare the documents for mailing. A change is required to eliminate this manual effort.
    Development has indicated an enhancement could be made to the RSNAST00 program where only those print jobs for application "MR" with transmission "1" (for print) would be gathered in groups of "X" number of documents to create one spool, prior to creating the spool, a check would be made to see if the next document was for the same vendor, if so the next document/s would be included in the same spool, when a new vendor was found, a new spool would be created.
    To temporarily fix the issue the jobs have been placed on "no execute" and the support team is identifing the chargebacks and RTV created during the week, manually running the RSNAST00 program in groups of 500 - 800 documents, ensuring all doucments for a vendor a sent in the same spool request.

  • Unable to send spool request to printer through BSP

    Hi Experts,
    We have an application build on BSP and provided a button called print in the application. When I press print, in our client requirement, an adobe with details should create a spool as well it should print the document automatically.
    Currently we some how managed to create a spool after pressing print but spool request is not going print automatically, its showing status as waiting with following error message
    "Frontend unavailable"
    Please help me out
    Thanks in advance
    Regards,
    Sridhar

    Hi,
    this will not work!
    If you print local, the GUI starts a local printing program. The browser is not able to start local programs, because of the restictions of Browsers.
    To use Networkprinter should work.
    Best regards
    Renald

  • How to print Spool requests for cheque printing sequentially

    Dear All,
    I am making vendor payments and printing cheques using F-58. It automatically creates a spool requests at the end of the transaction. When i complete all my payments and go to SP01 for viewing spool requests, the last request appears at the top of the list.
    If i select 3 consecutive requests and print them at a time, the last request gets printed first on the first cheque number and the first request gets printed on the last cheque number.
    This results in anomaly in the cheque number assigned in the system and the printed cheque as the last payment is printed on the first cheque.
    I am using dot matrix printer with  page format fixed for cheque specifications. The cheques are printed properly as per the format except the order of printing.
    Kindly let me know how to print multiple requests sequentially from the spool requests list such that the spool request number printed matches with the serial cheque numbers.
    Regards,
    SAP_2009

    Hi,
    I understod your issue.
    Whenever you posted multiple payment documents, and after that if you want to take cheque printouts sequentially by using more spool requests.........there is a way to sort out this issue.
    1) Select all of your spool requests and click on Sort in ascending Order (CtrlShiftF5) and click on Print directly (CtrlShiftF8). By doing this you will get the cheque printouts sequentially according to your payment document sequence.
    Hope this will help you
    Assign ********, if it solved your problem.
    Thanks,
    Srinu

  • Printing multiple spool requests at a time

    Hi All,
    I am using function module RSPO_OUTPUT_SPOOL_REQUEST to print the contents of the spool request. I want to print multiple spool requests at a time. We can input only one spool request number to the above function module at a time. Is there any way that I can print multiple spool requests with only single Print Popup Window ?
    Thanks.

    Hi Khanna,
    I tried that option at first place only. It results in multiple Print Popups. I want to avoid this. For all spool print requests, I want to show ONLY ONE Print Popup.
    Thanks.

  • Simple Request - How Do I Print a Spool Request in 3.1i?

    Here is the scenario:
        I have created an FI Misc Credit Memo for a customer who wants a hard copy of the document. Using transaction code FB12, I generate a correspondence. Then using transaction code F.64, I attempt to print the document. This generates a spool request with a number like 86,007.
    From there I go to system>services>output control which takes me to the spool request screen. From there, I am missing the next step.
    This screen has fields for:
    Spool request number (attempted number given when spool request was generated - 86,007, field only fits 5 characters so comma has been excluded)
    Spool request name ( I think this is my problem as I have no idea where to find this)
    User name (field is populated)
    From date  (field is populated)
    Client  (field is populated)
    Output device (have entered desired printer name)
    Format (usually self-populates once a successful print request is entered)
    Title (unnecessary field I believe)
    Recipient (unnecessary field)
    Department (unnecessary field)
    No one on our staff has been able to help me with this issue so I've turned to the community. I am an end user (Tax Analyst) who possesses little technical knowledge. My apologies. Thank you in advance for any help given!

    Hello,
    remove values from all the fields in the selection screen and enter only your spool number. The Execute wiht 'F8' and if the spool request is found, with the "printer" push-button you can print it.
    Best regards,
    Andrea

  • Not able to print to locl printer, spool request status is in wait

    Hi All,
    When user print to locl printer, the spool request is created and we get a error message saying "connection closed after (protocol) error (RC=1)". And we found the status of spool request is in wait state and if double clicked on it, it is showing "Internal error printing".
    Below is the log of Spool work process for your reference
    Found unqueued job 21701/1 (LOCL)
    ERROR => Printer LOCL: Lookup failed ?!?!? -> Status DELAY http://rspopcc. 0813
    Just to update you user is able to print all other documents except the documents from SAP application. And user is connecting to SAP application server through Citrix.
    We are on HP-UX, Oracle database and SAP R/3 3.1i version.
    Thanks in advance.
    Regards,
    Chandrika

    sundaresh suryanarayan wrote:
    Hello Chandrika,
    >
    > Is this printer is a network printer ?.   Use Device Type : SWIN and Access Method : G Front End Printing .  
    >
    > Thanks
    >
    > Sundaresh Suryanarayan
    Hi Sundaresh,
    Thanks for your reply.
    Yes it is a network printer. User is printing to his default printer(LOCL, with host printer __DEFAULT) and we are using  device type SAPWIN and access method F(printing on front end computer).
    Regards,
    Chandrika

Maybe you are looking for