Printing help. My Epson wireless printer won't print. Airport seems OK. I get the following message.../Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Cont ents/MacOS/rastertoescpII failed. What am I missing?

I can't get my Epson wireless printer to print. All seems well. Turned on and off. Green lights abound. My computer seems to see the printer.
Error message as follows:
/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS/ rastertoescpII failed
Can anyone help?
Thanks

You did not tell us how you installed the printer so it's a little tough to troubleshoot. Please carefully look over Printing Overview OS X Lion for instructions on how to add a printer. Also look on Printer and scanner software for Snow Leopard & Lion to see if your printer is compatible with OS X.
Finally PLEASE update your profile using the Profile Update link.

Similar Messages

I have an epson T50 shared network, which is connected to a computer that runs on Windows 7 64-bit. The 10 days Apple has updated the printer drive and since then has been trying to print the following message: / Library/Printers/EPSON/InkjetPrinter2/Filt

I have an epson T50 shared network, which is connected to a computer that runs on Windows 7 64-bit. The 10 days Apple has updated the printer drive and since then has been trying to print the following message: / Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS/ rastertoescpII failed.
What should I do?

The first thing you should do is re-write your post to make it a bit more understandable. I got you have an Epson printer connected to your PC, however after that your post doesn't make any sense. Are you attempting to print from your iMac, if so then you need to download and install Bonjour for Windows on your Windows machine. Then set Windows so it has printer sharing turned on and then on the iMac simply follow Apple's instructions for adding a printer.
http://support.apple.com/kb/DL999
http://support.apple.com/kb/HT4670

HT1296 somebody can help me?, I am trying to sync my ipad but i get the following message: iTunes cannot add any songs to the iPad "Fernando Velazquez Ipad" because no songs in the playlist "Purchased" can be copied to this iPad.

iTunes cannot add any songs to the iPad “Fernando Velazquez Ipad” because no songs in the playlist “Purchased” can be copied to this iPad.

That usually means your phone was previously sync to a different iTunes media library.
by syncing to your Mac now, if want to wipe the data off the phone and sync it with the data currently in the iTunes media library.

When I try to print, I get the following message : Error:/library/printers/hp/cups/inkjet.drivers/contents/MacOS/inkjet8failed How do I fix it?

When I try to print from HP 3050A, I get the following message: /error/Library/Printers/hp/cups/Inkjet.drivers/Contents/MacOS/Inkjet8failed. How do I fix this?

Hello, I have the same problem, more or less. I have a 24 inch, and my printer is a photosmart. It gives me the same location(except for instead of inkjet theres photosmart). I have started a discussion that could help you...
the discusion is
Can't Print have called apple and HP, CUPS problem?
I made it to help my problem, but it seems to be the same as yours.
Hope someone knows the answer

HT1338 I cannot print wirelessly from Macbook Pro: this is the error message I receive /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed. can anyone help. I have been able to print on this printer for

I cannot print wirelessly from Macbook Pro: this is the error message I receive /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed. Can anyone help. I have been able to print on this printer for months, then yesturday out of the blue I get this error.

"/Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /rastertoescpII failed"
I also saw this same error message above the Print Queue, ever since allowing the Epson Printer Software Update (August 2013) to install. After this update installed, I was able to print a basic Test Page from the Print Queue, but when printing from any application I only got "Looking for printer..." displayed above the Print Queue, which would stall and never print.
2008 MacBook, 10.7.5. It used to print to my Epson WorkForce 845 wirelessly without problems, before this software update was installed.
Changing the driver from "Epson WorkForce 845" to "Epson WorkForce 600 - Gutenprint v5.2.3" was a workaround that did allow me to print, but I wasn't satisfied with that.
Found this better solution in https://discussions.apple.com/thread/5233149?start=0&tstart=0
(with thanks to Yuengdog1983):
This issue may be a result of the Computer Name being left empty:
Open System Preferences and choose Sharing.
Enter a name for your computer.
Even without restarting the MacBook, I was able to now change back to using the Epson WorkForce 845 driver v9.0 successfully. I never would have guessed that a Computer Name is required in order to print!

My Macbook Pro won't print with my HP Photosmart 7515. I get the following message, " Print file was not accepted" Printer does work with our PC??

My Macbook Pro won't print with my HP Photosmart 7515. I get the following message, " Print file was not accepted" Printer does work with our PC?? Checked for software updates and are none. Talked with HP help and they say it's an Apple problem

I noticed that you said you uninstalled the printer, but you didn't mention resetting the print system. Resetting the print system will reset the drivers the Mac has installed and make them work like they should. Give this a try and see if it gets the printer working like it should. The document below will expalin more about doing this.
Basic Printer Troubleshooting Steps for Mac
If that doesn't help, see if you are using the AirPrint driver, or the printers driver. By default 10.8 uses the AirPrint driver if the printer supports it, so I'm betting that's the driver you're using. If it is, try using the driver for the printer itself. To do this, access Print and Scan. Click the + sign to add a new printer. Select the printer from the list. Click the dropdown next to Use and select the 7515's driver. Let me know what happens.
I am a printer tech for HP.

I am attempting to connect my Canon Pixma MG5220 printer/copier/scanner to my MacBook Pro OS 10.6.8. After loading software from Canon and attempting to print, I get the following message: NT_STATUS_ACCESS_DENIED. What can I do to fix this?

I just purchased and installed a Canon Pixma MG5220 printer/copier/scanner to my PC desktop with Windows XP. It works fine. It has been successfully installed on my network and I am able to use it with my laptop running VISTA. However, I am trying to connect it to my MacBook Pro OS 10.6.8 and I am not having much luck. I can see it as one of the printer choices when attempting to print; however, I get the following message:
NT_STATUS_ACCESS_DENIED
I have been searching for answers, but nothing seems to work yet. Does anyone have any suggestions?
Thanks.

Let me understand:
- you have purchased named canon, which is conencted to your PC running windows xp
- downloaded driver for win xp, and canon works fine
- canon is connected to that PC via USB
- that Canon is also activated as network printer, by allowing print sharing in windows; how did you set that option?
- now, you are in Mac OS x 10.6.8, downloaded Canon driver for Mac OS X, installed it, detected printer on the network, printer was installed; was it detected as attached to that PC running win XP? or not?
or you set canon by being connected to your mac directly via USB?
Now, there are some questions you should answer as some details are missing, and your initial text is not clear. Can you print if Canon is connected directly to your mac? did you try that? if not, do it before answering.

When I click "Buy Now" in iPhoto's book I get the following message: Your book appears to have default text that has not been edited. Printed books will not include this text. Do you want to continue?"

When I click "Buy Now" in iPhoto's book I get the following message: "Your book appears to have default text that has not been edited. Printed books will not include this text. Do you want to continue?"
How do I proceed? How do I identify which is "default text?"

What version of iPhoto are you using?
Go thru each page, check the layout to see if there's a text box included on the page and make sure there is text in that text box. If not it may show the "holding" text like this:
If you don't want to change the page layout to one that only has photos and no text boxes just select that holding text and put a space in its place.
OT

When I attempt to scan a document to my computer I get the following message make sure the printer s

I have an HP Photosmart 5514 printer. When I try to scan a document to my computer I get the following message
"Make sure the printer software is installed on your printer, and that 'Scan to computer is enabled via the pronter software"

Hello Stevefried,
Did you install the printer's software on your computer via CD or download?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

I have an Epson 2200 which was in perfect working condition until just now when I received the following error message: /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /. What to do???

I have an Epson 2200 which was in perfect working condition until just now when I received the following error message: /Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Contents/MacOS /. What to do???

Hello kelsey1942,
It sounds like you are not able to print to your Epson 2200. I found an article with steps you can take to troubleshoot printer issues on a Mac:
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Additional Information
Note: If your printer is wireless-capable, you should first add the printer to your network. Use the printer's control panel, or temporarily connect the printer to your Mac via USB. For more details, see this article.
You can find the full article here:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Thank you for using Apple Support Communities.
Best,
Sheila M.

TS3212 I cannot open itunes which use to work fine. I have uninstalled and reinstalled and I am getting the following messages. The program cant start because the MSVCR80.dll is missing from your computer. I also get Itunes was installed incorrectly. Erro

Itunes will not open on my computer. It was working just fine. I get an error message "the program can't start because MSVCR80.ddl is missing from your computer. Try reinstalling to fix program." I have tried this. I then get the error message "Error 7(windows error 126)"
I also get the following message during the download of itunes"Apple mobile device failed to start. verify you have suffcient privileges to start system services.'

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99642)

HT1926 I keep getting the following message after attempting to download and install the latest update for iTunes: missing MSVCR80.dll. error 7 (windows error 126)

I keep getting the following message after attempting to download and install the latest update for iTunes: missing MSVCR80.dll. error 7 (windows error 126). Anyone else having this issue? How do I get iTunes back in working order?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

HT1926 get the following message when trying to download iTunes, " program C:\program files (x86)\itunes\ituneshelper.exe" R6034 attempt to load the C runtime library incorrectly, any help or experience with this?

get the following message when trying to download iTunes, " program C:\program files (x86)\itunes\ituneshelper.exe" R6034 attempt to load the C runtime library incorrectly, any help or experience with this?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99280)

When I attempt to log on to I tunes I get the following message "The registry settings used by the I tunes drivers for importing and burning CDs and DVDs are missing This can happen as a result of installing other CD burning software Please reinstall

When I attempt to log on to I tunes I get the following message:
"The registry settings used by the I Tunes drivers for importing and burning CDs and DVDs are missing.
This can happen as a result of installing other CD burning software. Please re-install I Tunes."
To my knowledge no new software has been installed. I have tried un-installing and re-installing I Tunes but I still
get the same message.
Can anyone offer any suggestions? Do I need to download a new driver?
Bill Martin

I can get down as far as step 11 but it shows nothing about upper filters and when I type on "If the Upper Filters entry is missing follow these instructions" nothing happens
Do you mean you can't see the instructions on what to do if there is no UpperFilters entry?
If so, here's the relevant instructions for that step:
On the right side of the Registry Editor window, right-click the UpperFilters entry and choose Modify from the shortcut menu.
Right-click the empty white space within the right-hand portion of the Registry Editor window. From the shortcut menu, choose New > Multi-String Value.
Name this new value "UpperFilters" (without the quotes). Then, right-click the newly created UpperFilters entry and choose Modify from the shortcut menu.

TS1717 Started a software update this morning which didn't work. Now Itunes will not open at all. I get the following message."The program can't state becasue MSVCR80.dll is missing from your computer."

Started a Itunes software update this morning which didn't work. Now Itunes will not open at all. I get the following message."The program can't state becasue MSVCR80.dll is missing from your computer."

There are a couple of options that I know of to fix the issue.
One is listed in this thread - https://discussions.apple.com/message/24606478#24606478 - and involves uninstalling iTunes and related components and then re-installing iTunes. You will need to read the instructions in the thread to see the correct uninstall order.
Second option is use System Restore to set your system back to a date prior to the iTunes update. I did this before finding the thread mentioned above.
Not sure exactly what the problem is but I know, after a search, that MSVCR80.dll was indeed already installed on my computer.
Message was edited by: karivers

Printing help. My Epson wireless printer won't print. Airport seems OK. I get the following message.../Library/Printers/EPSON/InkjetPrinter2/Filter/rastertoescpII.app/Cont ents/MacOS/rastertoescpII failed. What am I missing?

Similar Messages

Maybe you are looking for