Printing in Epson TMU 325 receipt printer

Epson TMU 325 is a bidirectional printer that can endorse a check as well as print the receipt for a payment. Has anyone used this printer along with SAP? How have you achieved the bi-directional communication with this printer? I can imagine that we could probably use some print controls for printing the receipt. Can anyone throw some light on how to use this to endorse a check?

Can I accomplish it with these tools?
Possibly, but your tools will need to include a permanently installed Ethernet cable to connect the Time Capsule to your modem/router. Is that possible?
If yes, there is still no guarantee that the printer will work with the USB port on the Time Capsule, so you would want to "test" this out using a short, spare Ethernet cable first to make sure that it will work....before....you pull the Ethernet cable.

Similar Messages

PRINT CUPS EPSON TMU 220

Hi, I have a printer epson tmu 220 pd, which has no local connection driver for OSX, then the solution was to enable CUPS on my mac mini and add it as a usb RAW printer, It works some days, but now but now does not print, whenever send a job show me: printer off-line and in the error log show me the following: E [02/Sep/2013:18:46:51 -0500] Unknown directive BrowseAllow on line 8 of /private/etc/cups/cupsd.conf.
Only get it to print if I disconnect and connect to another USB port.
I modified, deleted, reinstalled as a new printer. I reset the printing system, but nothing resolve it.
Thanks by comments, I really apprecite your help.

Hello, cupsd.conf is a text file that can be opened by dragging it to text edit, might be interesting to see what line 8 says!?
Wondering, do you have Printer Sharing enabled?
Mac OS X: About the Reset Printing System feature ...
http://support.apple.com/kb/HT1341?viewlocale=en_US
10.5/10.6/10.7/10.8 instructions...
In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
if you hold option and click the "-" tab it resets the printing system.
http://www.macosxhints.com/article.php?story=20031215144430486
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
Resetting the printing system in Mac OS X 10.5.x+++
    1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
    2.    Choose System Preferences from the Apple menu.
    3.    Choose Print & Fax from the View menu.
    4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..."       As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
http://support.apple.com/kb/ht1341
Reboot.

Can't print to Epson TM-U590 Slip Printer from Report Generation Toolkit with LabVIEW 8.6.1

Hi all,
I have an application that uses the Report Generation Toolkit to print tickets to a docket printer. Usually this works fine - I have 8 existing installations where there are no problems
I'm currently installing the software at a new site that uses an Epson TM-U590 slip printer and I can't for the life of me get printing to work
Using a Standard Report, the Print Report.vi returns error -41002 which indicates it can't find the printer. I've opened up the VI using remote debugging and it does find the printer name correctly with the Query Available Printers.vi. It gets an error code -2147352567 from the Printout node, which then gets replaced with the -41002 error which is reported.
For historical reasons I'm still using LabVIEW 8.6.1 for this project. I'm considering moving to 2011 or 2012 but I've had reliability issues with other parts of the application after attempting to update to a newer LabVIEW version so I'd like to avoid that at this stage.
The application is running on a standard desktop PC with Windows 7. The slip printer works fine if I print to it from Notepad, and my application is happy to print to any other printer, just not the slip printer.
The slip printer is using the LPT port. Previously the docket printers I've used have been USB but I would expect the printer driver to hide this detail from the application...
Any ideas would be much appreciated
Cheers
Brett
Senior Software Development Engineer
Certified LabVIEW Architect and LabVIEW Champion
Solved!
Go to Solution.

I've managed to sort out the problem, thanks to this KB article: http://digital.ni.com/public.nsf/allkb/67D60209102E2161862568AC0074BF64
I'm now having the same issue with a Star docket printer (a TUP592), this time with another program developed in LabVIEW 2011.
As mentioned in the article, the problem is actually to do with the margin settings rather than the printer name, despite what the error message says
After some experimentation, I've gotten the Star printer to work by setting a large (>14cm) right margin. No idea why this is required as it seems to print right up to the right edge of the paper quite happily, but there you go.
So I haven't defintely fixed the original problem yet as I haven't gotten back to the site, but hopefully this will be of some help to someone else.
Cheers
Brett
Senior Software Development Engineer
Certified LabVIEW Architect and LabVIEW Champion

Photoshop suddenly does not print to Epson 3880 - PROBLEM: Cannot print from Photoshop After restart error message appears: - "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopen

PROBLEM: Cannot print from Photoshop
After restart error message appears:
— “There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.”
• All print commands are greyed out and unavailable — even to call up the printer commands cannot be done.
The printer printed fine until about 2 weeks ago when this error message appeared. Printing continues from Pages, I-photo, preview etc. — only Photoshop fails.
The printer has been turned on and off, as have open documents been closed and open etc.. Preferences reset. Repeatedly I have read through blogs and forums and attempted to contact Adobe — all without results
Epson support struggled to find reason and several solutions were tried and they assume this is an Adobe problem.
Running Mac Powerbook X 10.10.2 / Photoshop CS6 13.0.6.x64
Attempting unsuccessfully to print to Epson 3880
What Adobe support will be of help.
Robert Darling — 2/19, 20, 21,22,23/2015

Probably best to ask in Photoshop General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Problem printing to Epson FX 890 impact printer

InDesign CS3 5.0.2
Windows Vista 32-bit edition
4G RAM
Epson FX 890 Impact Printer
I have an Epson 9 pin dot matrix printer installed which is used to fill in 4 part carbonless forms. I've used it for years with Pagemaker with no problem, but when I installed a new computer with Vista and InDesign there's a problem with the print quality.
The characters look very grainy, like all of the pins are not hitting. It is a networked printer but is wired into the new computer. All other programs on the computer, including Pagemaker, print to it fine, and InDesign prints to a networked Canon laser and a hardwired Epson inkjet with no problem. I've tried different fonts and sizes and they all print grainy.
I thought it might have something to do with the "Appearance of Black" settings under Preferences ie: 100K Black vs Rich Black but have not been able to affect it with the different settings there.
Any help will be appreciated.

The only Vista driver offered by Epson for this printer is for Vista 32 bit OS and that's the one I'm using. To print in PDF you would just save the finished document to PDF format and then open and print that document in Adobe Reader?

Tiled printing & 16-bit vs 8-bit printing in Aperture

1. Is there a way to print large format prints by tiled printing in Aperture
2. If not, can anyone suggest other software?
If I convert to PDF Acrobat will do tiled printing but only to a postscript printer (unless things have changed in version 8) and the Epson is not a postscript printer.
3. PDF files appear to be 8-bit files. My sources are 16-bit TIFF (scanned negatives) and Nikon RAW (12-bit). If it is at all possible, I would like to be able to print using the full, non-dithered range of colors. Is this possible?
Thanks to all!

Sorry folks, I left the intro paragraph out of my original post, so here's the whole thing:
I have photographs that I want to print approximately 22" x 30" but my printer (an Epson R2400) will only print 13" wide. I have looked but cannot find a way to do tiled printing from Aperture. My questions:
1. Is there a way to print large format prints by tiled printing in Aperture
2. If not, can anyone suggest other software?
If I convert to PDF Acrobat will do tiled printing but only to a postscript printer (unless things have changed in version 8) and the Epson is not a postscript printer.
3. PDF files appear to be 8-bit files. My sources are 16-bit TIFF (scanned negatives) and Nikon RAW (12-bit). If it is at all possible, I would like to be able to print using the full, non-dithered range of colors. Is this possible?
Thanks to all!

How I can send a report directly to the printer "EPSON TMU 220" from form11

Dear,
I have a problem with Oracle Forms11g, I need send a report to the printer EPSON TMU-220 (Pos of sale printer) in the client machine.
Please, help.
Thanks
JC

Dear,
The problem is:
I need to send the report directly to printer. All other reports work fine with other printers in the network.
But the EPSON TMU-220, (I changed the card connection from COM to USB, and nothing)
Please, help me.
JC

Epson Receipt Printer

Has anyone used Milano Salon software? Their requirements are for an Epson TM-88 Series printer and was looking at the TM-T88V with a USB interface but there are about 46 different kinds and our supplier is asking for a specific part number
This topic first appeared in the Spiceworks Community

Instead of disabling EWF and then rebooting, try the following (new changes in bold):
Reboot your system.
DO NOT MAKE ANY CHANGES AT THIS POINT
Disable EWF using the command line: ewfmgr c: -commitanddisable -live
DO NOT reboot your system
Install your printer drivers etc.
Enable EWF using the command line: ewfmgr c: -enable
(This does not actually enable EWF it just sets the system so it will be enabled when you next reboot)
Reboot your system
(EWF will now be enabled)
Your printer should work.
Please do not read this sentence. Please ignore the previous sentence.

ILife won't Print to Epson PictureMate

I just love iPhoto, but I can't get it to print to my Epson PictureMate. The PictureMate prints from memoery cards and will print a nozzle check from the iMac, but it goes through the motions of printing then indicates that it is 'Stopped'. The primter icon in the Dock shows a red exclamation mark!

I too was troubled by this issue, and after the second attempt got this response from Epson which solved the problem.
Thank you for contacting the Epson Connection.
Please try the following to resolve the issue that you are having.
DEVICE REMOVAL
1. Open the MAC HARD DRIVE, APPLICATIONS folder, UTILITIES folder, PRINTER
SETUP UTILITY.
2. Highlight any listings of the Epson drivers and select DELETE.
3. Close the PRINTER SETUP UTILITY.
REMOVE FILES
1. Double click on the MAC HARD DRIVE.
2. Double click on the LIBRARY folder.
3. Double click on the PRINTERS folder.
4. Drag the EPSON folder to the trash can.
NOTE If you receive an access denied error message, this indicates that
you do not have root access. You will need to contact Apple for assistance
on obtaining Root Access.
5. Close any open windows.
6. Double click on the MAC HARD DRIVE.
7. Double click on the LIBRARY folder.
8. Double click on the RECEIPTS folder.
9. Delete any Epson Receipts.
10. Close all windows that are open, and restart your computer.
NOTE: The following procedure will remove all printers that you have
installed on your computer. If you have multiple printers on your system,
you will need to re-add all your printers once this is complete.
1. Make sure that your printer is turned on and connected to your computer.
2. Open the HARD DRIVE, go into the APPLICATIONS, and select the UTILITIES
folder.
3. Double click on the PRINTER SETUP UTILITY. Click on the PRINTER SETUP
UTILITY Menu option at the top of the screen and click on RESET PRINTING
SYSTEM. Click on RESET when prompted and then enter your system password.
This will remove all printer drivers in the list and you will have to add
all of them again. Now download the current printer driver.
DOWNLOAD
Please follow the steps below to download and install your printer in OS X:
1. Go to the website http://support.epson.com
2. Under the PRINTERS heading select Ink Jets and then your printer model.
3. Under the Drivers & Downloads section select Macintosh. Download the
most current version of the Printer Driver for your Macintosh operating
system.
INSTALLATION
1. After download is complete, double click the icon that appears on your
desktop, then click CONTINUE, then CONTINUE again, then OK on the
INSTALLATION WAS SUCCESSFUL screen.
2. Open the new folder created by the extraction process. It will appear
something like epson1XXXX (X represents variable numbers).
3. When you open this folder, you will find a file with a .DMG extension -
double-click it. This will create another icon on the desktop with the name
of your printer. Double-click to open the DISK IMAGE file.
NOTE: In most OS 10.3 systems the installer will perform this step
automatically and you will see an INSTALLER.PKG file.
4. Double click the INSTALLER.PKG file to start the installation process.
5. The next menu will prompt you to ensure that you have Administrator
Rights to install the printer driver. Click on the lock (if necessary) and
enter your password.
6. The actual installation process will begin. Click CONTINUE, then
CONTINUE again at the SOFTWARE AGREEMENT window, then CONTINUE again, then
AGREE.
7. You will be prompted to select a disk to install the printer to. Select
the appropriate Macintosh HD or OS X drive or partition and click CONTINUE.
8. In the next window that appears, click INSTALL.
9. You may be informed that the computer needs to be restarted after
installation; click CONTINUE INSTALLATION here. The driver will now be
installed and the system optimized. Restart the computer when install is
complete.
Configuration
1. Make sure that your printer is turned on and connected to your
computer.
2. Open the HARD DRIVE, go into the APPLICATIONS, and select the UTILITIES
folder.
3. Double click on the PRINTER SETUP UTILITY. If your printer is listed
correctly, close out of the windows and test your printer, as it is already
installed.
4. Click the Add tab at the top of the Printer Browser window and then
select More Printers tab at the bottom of the Printer Browser window and
then select Epson USB and then select your printer under Product Name. If
applicable select the arrow by the Standard option under the Page Setup
option and select the All option. If not simply click on ADD.
5. Close out of any open windows and test your printer. Please make sure
that you select the correct printer in the page setup and print menu of the
application.

How to set two Star's TSP100 receipt printer on the same mac ?

Hello
For my restaurant I use a FileMaker homemade software that can use two ticket printers of the same type (Star's TSP100 receipt printer).
One is set as "Kitchen" in the underground kitchen and the other as "Desk" in the main floor.
Software must prints orders for kitchen on the correct printer and other receipts on the other printer. It uses Applescripts command to switch printer before printing.
Sometimes the two printers are switched and reports are printed on the bad printers.
Software is working correctly, orders for kitchen are always printed on the same printer and other receipts are also printed on the other printer. When printers switch, the kitchen receive receipts for desk and orders for kitchen are printed on the desk printer.
How can I fix the two printers to be sure that every orders and receipt are printed on the correct printer.
Thanks for your help

Let me first say I have never tried to do that...
I believe this is completely about the driver. 1 driver can only correctly identify one printer in print & scan prefs. I think you need separate drivers and separate ways to identify each printer. Like - another copy of the driver with different named file(s); and a printer utility that allows you to change printer name.
For Epsons the USB setup includes the Serial number - which allows the driver to differentiate. Does your driver do that? Maybe there is an alternate driver you can use for one of the printers? Check out the free Gutenprint driver. Search for gutenprint mac.

Receipt Printer Que

Have Epson receipt printer install with Generic Text/Only driver. O\S is Windows Server 2008 r2. This printer is part of a Terminal Services network configuration. The printer work most days however it seem that when network traffic increase
the printer queue will jam and stop printing job causing a backup and then all job for that printer stop. Also, unable to delete the job from queue.

Hi,
Do you have only single printer installed in your network?
If more than one, then does it occur on all printer? What’s the exact printer model number?
Have you tried to re install printer driver again?
As you have commented that when network traffic increase then you are facing issue, for that you can check the print preference if you have applied. Also check printer properties are set properly.
Here providing workaround to cancel printing queue, you can first try to stop print spooler service and then delete all the spooled files and then start back again the spooler service. It might help for your issue. You can refer
KB 946737 guide and step for details for reference.
Hope it helps!
Thanks,
Dharmesh

Will an Epson TM-T88III thermal printer work on a Mac?

What are the chances (I haven't got it yet) of getting an Epson TM-T88III thermal receipt printer to work on a Mac (OS X 10.7.5)? It doesn't have a USB connection. And I can't see any Mac drivers available for it. Its connection is Serial RS-232 (possibly also Ethernet). No USB. I think you can get cable converters from serial to USB. But my concern is software.
I'm not going to be using the printer as a receipt printer in a POS situation. So I'm not fussed about proper receipt software. I just want to be able to print on it (ideally from something like Photoshop, full pixel control).
It seems Epson TM-T88V which has USB is fine with a Mac -- there's Mac drivers -- but they're much more expensive. Be great if I can get the III instead. But if it's not going to work on a Mac obviously there's not much point. Has anyone got a III to work on a Mac? Might it be possible?
Thanks.
(What on earth has Apple done to this text input on this forum? It doesn't work very well -- not normal, horrible behaviour. You have to click several times to move the cursor, selecting text is a bit messed up. Not fun.)
Extra Q: Is there a general printing specific forum on here rather than one that's under/associated with particular versions of OS X?

Have you looked here?

Print to epson validator

dear all,
i have epson validator printer on my clone/pord servers, we are able to printer receipts successfully on the validator from the prod server, we clond the prod server to other server and we add the eposn validator printer to it, when printing from the command line it dose print on the validator but when print from the application it dose not print on the validator receipts paper but it print on the normal slip paper (A4) paper. what could be wrong i check the printer settings on both prod/clone they are exaclty the same and i checked the prt files and the initialization command and they are the same.
any hint will be helpful
fadi

Hellow there,
Are you using PASTA or not?
Because If you are using PASTA, this note will be helpful (267026.1).
Otherwise, check this note (297522.1) which may help you understand where the error is.
all the luck ...

Can't Print From Epson R300 Anymore

This is my first post, forgive me if I'm posting in the wrong area, or if this has been addressed and answered previously. I have a Powerbook G4, running OSX 4.11 and using an Epson stylus photo R300 and have successfully been printing for years. Suddenly, nothing. I've been enduring this problem for quite some time, and cannot recall if there had been a software update prior to this happening. I have contacted Epson support, followed all their instructions, re-installed drivers, reset, etc. The problem I seem to have is when the printer is connected and powered on, nothing shows up in the printer set up utility. When selecting Epson USB, no models appear for me to add.
So far, I've been completely striking out! Any help/direction would be greatly appreciated! (also, any insight as to what is the cause.. Apple? Epson? who's responsible for the fix?)
Thanks in advance!!

I am in a similar boat with Munga. I have an iMac 24 Intel Duo Core running OS 10. 4.11
I've had my R300 since I bought the computer and it has been working beautifully until the last 4 months or so. When trying to print a dialog box popped up saying that the computer couldn't communicate with the printer, though I could see the printer in all dialog boxes leading up to printing. The printer works with my laptop running OS 10.4.11 as well as using CF card directly in printer. I checked the USB cable with another device in the same USB port on my iMac and it works fine too. I tried resetting the PRAM,repairing the disc permissions,restarting numerous times and eventually resetting the printer and reloading the Epson Software. Before reloading the Epson software I went to the library>printers and removed the old Epson software. I also went to Receipts in the Library and removed the Epson receipts as suggested else where on this forum. The new Epson software reload hangs at "6 more items to load" . If I connect the printer to my IMac I can see it in the Systems profiler box as well as the print dialog box. I'd really like to use my printer. Please help!

Printing on Epson 980 via AE

Tried to hook my printer to AE to be able to print over my network. Printer works fine when connected to G4. Sees printer in rendevouz but not in printer list when on AE. Tried printing on IP printing also without success. Any ideas would be appreciated.

The following fix was suggested by Epson to someone in a similar situation. See if it helps:
Thank you for contacting the Epson Connection.
Ensure the printer is directly connected to the computer. We would
recommend trying another USB port.
Please follow the instructions below to completely remove and reinstall the
resident Epson driver package for your printer. You can leave the printer
on and connected throughout.
REMOVE FILES
1. Double click on the MAC HARD DRIVE.
2. Double click on the LIBRARY folder.
3. Double click on the PRINTERS folder.
4. Drag the EPSON folder to the trash can.
5. Close any open windows.
6. Double click on the MAC HARD DRIVE.
7. Double click on the LIBRARY folder.
8. Double click on the RECEIPTS folder.
9. Delete any "Epson" receipts.
10. Close all open windows and restart your computer.
REINSTALL THE EPSON DRIVER PACKAGE
1. Insert your Mac OS X 10.4 Install disc. Open CD when it appears on the
desktop.
2. Find and double-click on the Optional Installs.mpkg.
3. After the installer opens, choose the following custom install options:
-Check "Printer drivers" and use arrow next to this entry to expand this
category.
-Check "Epson" below the "Printer drivers" heading. (You do not need to
install other manufacturer's packages.)
4. Click "Install" and follow prompts to reinstall the resident Epson
printer driver package. Restart the computer after installation is
complete.
READD THE PRINTER
1. Go into HD > Applications > Utilities and open the Printer Setup
Utility. The "Printer List" window appears.
2. Highlight and delete any existing references to your Epson printer. (If
you want to be thorough and do not have any other printers on the Mac,
choose "Printer Setup Utility" from the top of the screen and "Reset
Printing System". Confirm resetting the system. This clears any existing
printer entries and queues. If you have other printers on the Mac and use
this reset, you will need to readd them later.)
3. Click ADD. Printer Browser window appears. (At this point your Epson
printer must be on and connected.)
4. Highlight the desired Epson printer model and click the MORE PRINTERS
button at the bottom of the window. (Do not change any other fields.)
5. A window now opens which is identical to 10.2. and 10.3, where you can
select EPSON USB (for a USB cable connection) or EPSON FIREWIRE (for a
firewire connection) at the top of the screen. Highlight your printer's
name and select Page Setup "ALL" below, then hit ADD to return to the
Printer List with all available printer/layout options now showing. (If you
are unable to see the full description under "Kind" you may need to expand
the Printer Setup Utility window or extend the "Kind" column to make this
visible.)
6. Make the printer name/layout option you wish to use default in the
Printer Setup Utility before closing it. For example, if you plan to do a
borderless print, ensure the printer name showing "(Sheet feeder -
Borderless)" under "Kind" is set as the default printer here. Then, when
you have opened a photo and are ready to print, go to File > Page Setup and
File > Print in the program you are printing from and ensure that the
specific printer/layout option you want to use is also selected as
"Printer" or "Format for".
Georgina S
Epson Connection
Epson Mac OS X (10.4)

Printing in Epson TMU 325 receipt printer

Similar Messages

Maybe you are looking for