Printing labels in using standard report

Hi everyone,
can anyone help me in creating a report, which has the output as standard AVERY 8160 Labels format of MS Word.
The main purpose of this report is to print Labels.
regards
Ajay Nuduruapti
SAP - Technical Consultant

Hi,
The Best method is use the Forms.
In standard report format, use the subroutine to print the one label using the write statement , the same function is used till the last row.
Match the no. of rows reached with the Page row count. Increment the row line dynamically and reset if the new page starts.
Hope it will help u.
Shankar

Similar Messages

Printing PO's using Crystal Report

Hi,
I am printing Purchase order using crystal reports. And when I print single PO, it is printing perfectly and I am printing one PO per page in pre printed stationery. But when I Print Multiple PO's i.e., mass printing, the first record gets printed correctly but when the printer scrolls to second page, the header section jumps one line above and when it scrolls to third page, it jumps two lines above and so on. And I am using continous stationery in dot matrix printer. How to print multiple PO's with Correct page header alignment. (Also I found the same problem when I print A/R Invoice).
Thnx in Advance.
Regards,
S Desikan

Dot matrix printer has the inherated weakness for linefeed control.
You have to change the page setting quite a few times before it can be fit.
If possible, laser printer will be much better. What you see is what you get.
Thanks,
Gordon

Print Out Through *MIR6* Standard Report

Sir,
I would like to take print out of selected line items ( i.e selected rows ) . Is it possible
through standard report MIR6 . And if yes please tell me how?. or any other option.
thanks.

You could do a screenshot by using PrintScreen button, then cut the part you need and print it out. Otherwise it's not possible to print just some lines of any document.
P.S. This question has nothing to do with ABAP, please use the correct forum next time.

Printing Extremely Slow Using Crystal Reports 2008 ActiveX Print Control

Problem:
We are trying to upgrade our existing Crystal Reports 10.0 ActiveX Viewer ASP based reports to the new Crystal Reports 2008 ASPX Report Viewer but are having print performance issues that have prohibited us from moving forward.
Environment:
Windows 2003 Server Standard Edition 32-bit with SP1
IIS 6.0 running ASP .NET version 2.0.50727
Crystal Reports 2008 SP0 with FP1
Crystal PrintControl.dll version 12.0.0.796 (verified on server and client)
Details:
Crystal Reports 2008 ASPX Report Viewer Object & ActiveX Print Control Report Printing Scenario
From a typical 27 page report, the user clicks the Print icon from the ASPX Report Viewer Object.
The Print window with the message Crystal Reports Print Control immediately appears on the screen. This window is on the screen for approx 30 seconds.
The Print Setup window finally appears on the screen. The user verifies the printer, chooses to print pages 1-5, and clicks the Print button from the window.
The Retrieving page 1 message appears in the Print window. The message remains in the window for approx 30 seconds.
The Printing page 1 message appears in the Print window. The message remains in the window for approx 30 seconds.
The Printing page 2 message appears in the Print window. The message remains in the window for approx 30 seconds.
The Printing page 3 message appears in the Print window. The message remains in the window for approx 30 seconds.
The Printing page 4 message appears in the Print window. The message remains in the window for approx 30 seconds.
The Printing page 5 message appears in the Print window. The message is in the window for less than 1 second.
After 3 MINUTES of waiting the report finally starts printing.
Crystal Reports 10 ASP ActiveX Report Viewer Report Printing Scenario
From the same typical 27 page report that was used in the Crystal Reports 2008 scenario, the user clicks the Print icon from the ASP ActiveX Report Viewer.
The Print window Immediately appears on the screen. The user verifies the printer, chooses to print pages 1-5, and clicks the Print button from the window.
The Print window Immediately disappears from the screen and the report Immediately starts printing.
The entire print process takes only 3 u2013 4 SECONDS.
Even though we are trying to get the users to decrease the amount of paper used in report printing. They still do a significant amount of printing. The difference between the print performance using Crystal Reports 10 (3-4 seconds) and Crystal Reports 2008 (3 minutes) is totally unacceptable to our users.
Has anyone else experienced this problem and is there a known fix for it? This is the only thing holding us back from our upgrade and it has become very frustrating to us.
Much thanks to anyone that can shed some light on this.

Hi Brian,
Please have a look at [this|Crystal 11.5 Activex control for viewer; post.
However, have you tried with the No Printer options available in Print Options window from designer?
Regards,
Atanu.

Printer configuration for 11i, standard reports to A4 size paper

Hi All,
we are using 11i EBS(DB 9ir2).
I want to set default paper size for oracle standard reports to A4 paper size.
can any one guid me how to achieve this.
regards

Hi;
Please follow below and see its helpfull:
Reports 6i: How to set Paper Size (A4, letter,...) by default
Also see:
Doc ID: Note:269129.1 How to Implement Printing for Oracle Applications: Getting Started.
Doc ID: Note:112172.1 Oracle Applications Character Printing
Doc ID: Note:61393.1 Printing in Release 10
Regard
Helios

Server error in printing in server using crystal report 2008 with VS2008

Hi,
We are using Crystal report 2008 in VS 2008. Everything working fine in local but when we deployed it in the server we are getting the below while print the report.
"An error occurred on the server. Printing will be stopped. Would you like to view the error information"
Anyhow the report is printing but I don't know why this error is occur and how to stop this. I had installed the CR runtime in the server. I dont know what is going wrong. The same we tested locally in a non crystal report installed PC.
Please help me to get rid out of this error.
Thanks
Natraj

Soemthing strange going on here.
Typically this Integrated vs Classic is an issue with images where Classic uses web.config tags between <system.web><httpHandlers><u2026 crystalimagehandler../></httphandlers></system.web>
Integrated uses tags between <system.webserver>u2026<handlers><..crystalimagehandler/></handlers></system.webserver>
Not sure why this would affect printing. Do you have tags that specifying where to download the printcontrol from? On the other hand, I would think that if images had anything to do with it, then you'd get red Xs when viewing. As far as I know, the printcontrol.cab doesnu2019t need to be specified in the <system.webserver> tags.
This one may be best resolved over the phone. Phone support can be obtained here:
http://store.businessobjects.com/store/bobjamer/en_US/pd/productID.98078100?resid=S6I@hgoHAkEAAGsiyVkAAAAR&rests=1282226845369
Ludek

How to use standard report program [RPR_ABAP_SOURCE_SCAN]

hi all,
how to use RPR_ABAP_SOURCE_SCAN report program for checking my program. when i run it its asking me the report name and i gav it but, its showing me the error message as 'ENTER SEARCH STRING' .
SO I NEED TO KNOW WHERE I DID WRONG.
thanks in advance,
suresh babu aluri.

hi suresh,
i hav tried that, its working
enter like this,
<b>program name : zpy_text</b>
under search criteria.
<b>Find string : select</b>
"******enter any string that is in that program, usually select will be there, then execute.
With Regards,
S.Barani

Print Draft Document using Crystal Report in SAP 8.8

I created a Crystal Report Layout using SQL View as data source for AR Invoice which prints out fine. (everthing on 1 page)
To print Draft Invoice, I copied the view to use ODRF/RDF1 instead of OINV/INV1, copied the Crystal report and updated the data source to the new view. When print Draft Invoice, it prints 3 pages - page 1 blank, page 2 just the "DRAFT" watermark, page 3 the crystal report without watermark.
Steps to print Draft Invoice: Sales-A/R > Sales Report > Document Drafts Report > Open selected Draft Invoice document > File > Select Layout and Print...
What is happening behind the scene when printing Draft documents? What is the correct way to print Drafts (e.g. special settings designing Crystal Reports)?
Thanks,
Grace

Thank you for your reply. It works in this specific report.
But we have both PLD and Crystal Report in the system, changing the settings means the PLD will lose their watermark...
Also, I don't know how the Draft is displayed, but when select Print Preview for Draft, it's asking for parameter (DocEntry), which I have setup a DocKey@ in Crystal Report and set it in the Selection Manager. Does SAP provide DocEntry in Draft Invoice (ODRF) the same way as in Invoice (OINV)?
Thanks,
Grace

Print layout designer using Crystal report

Hi Dear;
how can i create a print layout in crystal report instead of print layout designer
is any conversion of should i created from scratch?
from where can i download the crystal report templates?
regards;

Hi,
There is no conversion tool between these two reports. You have to create them from scratch.
Check these threads to find out more:
Sample Crystal Reports
Re: SAP Business One and Crystal Reports
Thanks,
Gordon

How to print standard report region to a PC printer via Win printer driver?

I know it's not very sexy, but sometimes an app user needs to print a standard report region to a printer that is connected to their PC. So that they can print their Apex report in the same manner as they do everything else from their PC, using a predefined Windows printer driver is necessary. What is a simple way to add a "Print" button to a standard report that will open the Windows print facility?
P.S. Apex 4.1
P.P.S. Hopefully, the solution is simple. i.e. No installation of additional print drivers, etc. The user may not be technologically sophisticated. They simply want a hard copy of information that they pulled up with their Apex app (they don't even know what Apex or a printer driver is).
Thanks,
Kim

Add a Print button or link to the page with an <tt>onclick</tt> attribute that calls the method<tt>print()</tt> method:
onclick="window.print();"You can also use a print media style sheet to suppress unwanted page elements (tabs etc) from the printed output and optimize the report formatting for print.

Standard Report - Append Control Image Width Problem / Limitation or Bug?

I am trying to create a Standard Report and am having a hard time placing a XY Graph control on the report. My problem is I want to use the maximum page area to view the graph. For this reason, I am keeping the margins small and increasing the size of the control so that it occupies almost all of the page. What I find is that after a certain limit, the XY graph image output on the report does not increase in size even if you increase the control size. In fact the image will get worse with larger size once beyond the limit. No matter How I try, the Image will not occupy all the area between the Horizontal Margins.
Either this is a bug or undocumented limitation.
Ahh.. One other possibility exists, that I am not smart enough. But if some one can help me here, It will be greatly appreciated.
I am Using LV 8.2 on XP machine.
I am attaching the VI and two PDF files, In "MyReport w1000.pdf" The XY Graph is 1000 Pixels Wide. In "MyReport w2000.pdf" I made it 2000 Pixels wide, however the size of the image did not increase on the report. Also You can notice the difference in quality between the two reports.
To use my vi just size the graph to different sizes and run it, It will output to the default Printer. If you have a PDF writer set as default printer, It will save it to file.
If anyone can help, I thank you and wish you...
Good Luck!
Mache

I do not like Vivek's workaround. "Use HTML report" is not acceptable when the question is about Standard report. People may want to use Standard report and there is a reason it is called standard.
Anyway one solution is to size the image to most optimum size - as large as possible but retaining the graphical quality. This will still leave you with large white spaces around your graph object.
Second solution that I am using is to Put the graph object and any other elements that I want on my report on a Front panel of a VI. Size the objects and front panel and objects appropriately and then use Print Panel to Printer method to Print the whole VI front panel. In my app. This VI which mimics the report is called from my app and is called Print Preview. There is even a Vi that allows you to choose the printer. http://zone.ni.com/devzone/cda/epd/p/id/1327
I am attaching a Sample Report and Code Snippet to look at.
Good Luck!
Mache
Attachments:
Labview Document.pdf ‏21 KB
Print Code.jpg ‏30 KB

Using crystal reports to generate invoices

Post Author: samme
CA Forum: General
I'm writing a report for a client who wants to print multiple invoices using crystal reports. The invoice needs to sort in date order, one date and information associated with that date on each page. Each page has a subtotal since multiple items/services are linked ot one date. The last page of the invoice needs to have the total and should at the bottom of the page with the last subtotal. Not onlastrecord does not work because if the user prints multiple invoices, crystal doesn't see the "last record" until the last record of the last invoice.
The client wants the normal invoice information on the first page of the invoice: Company Logo, Customer Address, Company Info, Invoice #, Date, etc. as well as the column headers - quantity, unit of measure, price, etc.
On all other pages of the invoice, the client wants, the company logo, the invoice # and the column headers.
I have the report grouped by invoice number and then by a date formula. I cannot seem to get where I need to be with this invoice and have been working on it for some time. Can anyone give me some direction please.....
Thanks in advance!

On Sat, 15 Mar 2003 16:46:48 GMT, "Bill Bradley"
<[email protected]> wrote:
>I know. We thought that the Report Builder would be the way to go,
since
>ART didn't do too much for us. You guys poorly document it, and,
show no
>examples of using it to build a report. In addition, it'd be nice if
>SOMEONE would come up with a list of what tables show what. While
Novell
>may have a detailed list of things in the ZFD docs, it's pretty much
so
>detailed and complex that, it's next to useless. I've resorted to
doing
>huge dumps of things to a csv, then, using CR or Excel to generate
some kind
>of report.
>
>The whole process is not as easy as it should be, seeing that we paid
money
>to get a reporting vehicle.
>
>As comparison, SMS isn't any easier, but, there's more documentation
on it,
>so, when you're forced to roll your own report, it's a clearer
path...
I do understand, I'm not a programmer either :-(
the company who wrote report builder is Digital Metaphors, they have a
very good
training application and additional detailed information of how to
write
reports.
The CIM schema is I agree Cr** (well not easy) and without the detail
that
Novell provide it doesn't work.
I hope that a friend of mine is going to provide the compromise that
you and I
are looking for. Namely the ability to create the SQL queries that
ART can
make, with a simple report system. Keep an eye on caledonia.net for
an
announcement for ART4 (Derived from but unrelated to Salford
Software's
product) :-)
Tim
No Direct e-Mail Please!
Tim Heywood
Independent Consultant
Scotland
Novell Support Connection SYSOP
In theory, practice and theory are the same,
In practice they are different!

Printing PDF documents using FOP

Hi,
I seem to be getting the following error when printing to PDF using FOP:
report error:
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1186
ORA-12571: TNS:packet writer failure
I've set up PDF printing by following the (FOP) instructions in the following link:
http://www.oracle.com/technology/products/database/application_express/html/configure_printing.html
I've verified that my OC4J container and the jsp page apex_fop.jsp is running as it should as I can get PDF documents back if I call the jsp page outside of APEX (by sending in my own template and xml request parameters).
I've also verified that I do hit the apex_fop.jsp page when trying to print from within the APEX application. The problem is that the two parameters template and xml are both null when trying to print PDF from APEX.
It appears as though APEX is not sending in the template and xml request parameters.
My test case is to create a simply report query in shared components, use a generic layout, select the pdf option and click on Test Report. The result is the error shown above.
Any ideas? I know I'm close!
btw, I'm using 10g and APEX 3.1
Sanjeev

thanks Dimitri ..
I have progress... I went back and reconfig'd my oc4j, since Ihad donethat a long time ago.
Now I am getting the 500 Internal Server Error
Servlet eror: ... The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.
The application.log give me a dump ...
09/01/20 18:55:29.515 10.1.3.4.0 Started
09/01/20 18:55:29.718 fop: 10.1.3.4.0 Started
09/01/20 19:00:45.906 fop: Servlet error
oracle.xml.parser.v2.XMLParseException: Start of root element expected.
at oracle.xml.parser.v2.XMLError.flushErrors1(XMLError.java:320)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:341)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:303)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:320)
at oracle.xml.xslt.XSLProcessor.newXSLStylesheet(XSLProcessor.java:713)
at oracle.xml.xslt.XSLStylesheet.<init>(XSLStylesheet.java:321)
at oracle.xml.parser.v2.XSLStylesheet.<init>(XSLStylesheet.java:114)
at apex_fop._jspService(_apex__fop.java:71)
at com.orionserver[Oracle Containers for J2EE 10g (10.1.3.4.0) ].http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:724)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:414)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher
.java:713)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher
.java:370)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler
.java:871)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler
.java:453)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler
.java:221)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:29)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:879)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor
.java:303)
at java.lang.Thread.run(Thread.java:619)
Not sure what to make of this, but it does give the xact same error each time.
For what it's worth, I can successfully call a test page per Marc Sewtz's blog, so conceptually something is working, which is progress. I'll keep at it, but suggestions are welcome. Thanks for the direction.
Karen

Printing labels

I would like to print labels while using contacts in icloud, but can't figure it out. My mac can not use icloud since it is old and my address book won't sync with my contacts in icloud. What can I do to print labels?

AFAIK there is no facility to print labels from iCloud.com.

Document sum field in the standard report j_1af205

Hi experts,
Am using standard report J_1Af205 to display the daily vat report.
Here am facing the issue in Document sum.
The amount displayed here is 4.154,63 but the correct amount is 4.154,61.
Kindly guide me to solve this.
Thanks and Regards,
Raja.

Hi Prasad,
Happy to hear from you!
I would like to know mostly which field will be used for document sum and that field is from which table in the standard report J_1AF205.
With Thanks,
Raja.

Printing labels in using standard report

Similar Messages

Maybe you are looking for