Printing takes too much space!
Hi,
I need to print a JTable's contents. This JTable has about 10 columns and about 500 rows. I print the column header in each page, and as many rows fits in a page until it is done. I separate each row with a line.
Now, this takes about 10 MB in the Windows spooler, which also make the printing slow too.
How can I do to reduce the quantity of memory it takes to print?
Thanks in advance,
Gabriel
In general, in JDK 1.2 printer engine not compare to speed even with JDK 1.1 - all fonts are conwerted into shapes (maybe this is not true for jdk1.3+ for some set of fonts - but by sources of JDK1.2 this is it) this aproach caused even moderate amount of text, produce huge amount of shapes. So, if performance is the key for you application - try to play with rasterisation options or take look at non standart printing engines and on JDK 1.4 it is still beta but printing systeme take serious step ahead.
If you dont statisfy java printing at all - try to extend com.sun.awt.windows.WPrinterJob - this is not violate any Sun's right but strongly not recomended.
Similar Messages
-
TM backup takes too much space
I restored the boot disk (Macintosh HD) from TM's last backup.
The first new backup takes too much space on your external drive!
Is it true?
Macintosh HD:
Capacity: 250.66 GB
Available: 130.01 GB
Message was edited by: tamiasThank you, I understand.
I have 3 partitions and I just restored the system partition, the other two were normal.
Macintosh HD:
Capacity: 250.66 GB
Available: 131.05 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Work:
Capacity: 374.11 GB
Available: 160.36 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Work
Extra:
Capacity: 73.3 GB
Available: 31.64 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s4
Mount Point: /Volumes/Extra
I must have three times to recover the system partition.
I'm not sure that the drive for 1 year of operation is out of order. During the day the computer works fine, but every morning after wake up,
when disc is cold ,
and after 2 - 3 minutes go to freezing all apps. It seems that does not see the HDD.
After a forced shutdown and restart the system sometimes can boot normally and without error in the file system, but often does not load.
After several attempts to boot the system it is still loaded, but disk utility shows :
2009-02-04 13:46:25 +0800: Verifying volume “Macintosh HD”
Starting verification tool: 2009-02-04 13:46:25 +0800
2009-02-04 13:47:53 +0800:
2009-02-04 13:47:53 +0800: Performing live verification.
2009-02-04 13:47:53 +0800: Checking Journaled HFS Plus volume.
2009-02-04 13:47:53 +0800: Checking Extents Overflow file.
2009-02-04 13:47:53 +0800: Checking Catalog file.
2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: Incorrect block count for file indexr3_db
2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: (It should be 2080 instead of 2264)
2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: Incorrect block count for file indexr3_repo
2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: (It should be 8932 instead of 9180)
2009-02-04 13:47:53 +0800: Checking multi-linked files.
2009-02-04 13:47:53 +0800: Checking Catalog hierarchy.
2009-02-04 13:47:53 +0800: Checking Extended Attributes file.
2009-02-04 13:47:53 +0800: Checking volume bitmap.
2009-02-04 13:47:53 +0800: Checking volume information.
2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: The volume Macintosh HD needs to be repaired.
Repair can not restore the system partition. I restore the Macintosh HD from last backup and it works well deep into the night!
Maybe temperature sensor does not work, or is a hard drive?
Thank you, I understand.
I have 3 partitions and I just restored the system partition, the other two were normal.
Macintosh HD:
Capacity: 250.66 GB
Available: 131.05 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s2
Mount Point: /
Work:
Capacity: 374.11 GB
Available: 160.36 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Work
Extra:
Capacity: 73.3 GB
Available: 31.64 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk0s4
Mount Point: /Volumes/Extra
I must have three times to recover the system partition.
I'm not sure that the drive for 1 year of operation is out of order. During the day the computer works fine, but every morning after wake up,
when disc is cold ,
and after 2 - 3 minutes go to freezing all apps. It seems that does not see the HDD.
After a forced shutdown and restart the system sometimes can boot normally and without error in the file system, but often does not load.
After several attempts to boot the system it is still loaded, but disk utility shows :
2009-02-04 13:46:25 +0800: Verifying volume “Macintosh HD”
Starting verification tool: 2009-02-04 13:46:25 +0800
2009-02-04 13:47:53 +0800:
2009-02-04 13:47:53 +0800: Performing live verification.
2009-02-04 13:47:53 +0800: Checking Journaled HFS Plus volume.
2009-02-04 13:47:53 +0800: Checking Extents Overflow file.
2009-02-04 13:47:53 +0800: Checking Catalog file.
2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: Incorrect block count for file indexr3_db
2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: (It should be 2080 instead of 2264)
2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: Incorrect block count for file indexr3_repo
2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: (It should be 8932 instead of 9180)
2009-02-04 13:47:53 +0800: Checking multi-linked files.
2009-02-04 13:47:53 +0800: Checking Catalog hierarchy.
2009-02-04 13:47:53 +0800: Checking Extended Attributes file.
2009-02-04 13:47:53 +0800: Checking volume bitmap.
2009-02-04 13:47:53 +0800: Checking volume information.
2009-02-04 13:47:53 +0800: 2009-02-04 13:47:53 +0800: The volume Macintosh HD needs to be repaired.
Repair can not restore the system partition. I restore the Macintosh HD from last backup and it works well deep into the night!
Maybe temperature sensor does not work, or is a hard drive?
WDC WD7500AAKS
Total Capacity : 698.6 GB (750,156,374,016 Bytes)
Message was edited by: tamias -
Firmware takes too much space any way to reduce it?
when i updated the firmware i noticed i had less Mb in the 515 player is there any updated firmware that takes less space?
why is there only 241Mb free if its a 256Mb storage thing? Tnx in advanced for ur answerI have never used any of MSI's MP3 players, but do they show up in my computer? If they do right click on the drive and go to properties. Down at the bottom it will show the capacity. As an example my 128MB USB flash drive show 130,019,328 bytes, but that equals 123MB. What does yours show?
Also without any music on there how much space is used according to the property page?
Good Luck
Jeremy -
Ipad 3th gen photo sync problem take too much space / wrong color
I am so happy after i got my 3th gen ipad i start sync 7k+ photo off my computer here problem i got and play phone tag with techsupport until now i still have this problems i wonder if anyone counter those and got tip to solve it.
1. photo size in computer and ipad not match.
my computer show 5 photo take 6mg
i try a lot photo show in computer 386mg show in itune capacity 14.5gb i check in ipad do some + n - it take around 6.6gb
i resize photo to so small it come out same problem
2. photo color show not correct.
most of my photo sync to my ipad show in green or purple color.
I find out that any photo not in sRGB and do not have iccc color problem will have this problem i can be fix by convert it to sRGB and add iccc profile but it should not be this way ..
the problem just with photo app that come with ipad, i test with adobe photo express it does the same problem color go all jack up.
as now big big problem is can't seem to get photo sync correctly without 1 problem or other .. with 32Gb hdd i can't even get all photo that show 15gb in pc
system
win 7 home 64bit with latest itune 64bit
ipad 3th gen 32gb with at&t 4glteI'm running iOS 5.1 on my iPhone4 and my new iPad3. But I never saw this color effect on my iPhone3G or iPod2G as well. I did sync some slideshows as well, but that is done on a Mac, not a Windows PC.
What are the settings on your camera when you shoot the photos? Is the sRGB profile embedded by the camera? Any RAW formated pictures involved? -
Bookmark toolbar takes too muck space
Here is screenshot demonstraiting the problem:
[http://wstaw.org/m/2012/07/17/snapshot2.png Screenshot]
Main Toolbar is disabled
Bookmark toolbar contains a few folders and located at the top row along with the navigation buttons and page tabs.
The problem is bookmark panel takes too much space (it is too width) - lots of free space is unused.It never occurred to me to put the bookmarks on the tab bar. They don't seem to auto-size correctly there. (On other bars, you can re-fit the bookmarks using: View > Toolbars > Customize ''or'' right-click blank area of tab bar or navigation toolbar > Customize, then just clicking Done.)
There are some methods for applying style rules to the Firefox UI that might help in this case. For example, you might be able to specify a maximum width for the bookmarks part of the bar. For example:
<br>#TabsToolbar #personal-bookmarks, #TabsToolbar #PlacesToolbar {max-width:350px !important;}
To apply such a rule, you can use the Stylish extension or the userChrome.css file (as described in other threads, but I'm short of time to search them up at the moment). -
I was copying files to my time capsule when it crashed when it was almost finished. Now I am stuck with a light grey folder I can not delete. I would´t care if it wasn´t for the fact the folder is 1 TB size and takes up too much space. I have tried turning on and of Hiding Files in Finder and what not with no success. So, how do I delete this folder. Remember, I am not extremely familiar with technical terms.
I recommend you erase the TC.. it is the easiest and fastest solution.
In Airport utility open the disk tab and select erase.. choose quick erase.. it will take less than 1min.
Start again but copy files in small amounts. -
Bookmark Toolbar bookmarks have icons & take up too much space.
Firefox 4 beta 3 added icons to the Bookmark Toolbar, i.e. folder icons next to folder drop-downs, and mini-icons for links. While they're pretty, they take up too much space. Beta 2 didn't look like this.
How can I get rid of them?Not on OS X.<br />
It is probably the first Firefox version that will have icons on the Bookmarks Toolbar if you get them by default.<br />
In previous Firefox versions you need a special theme or code in userChrome to accomplish that.<br />
Now you will need code in userChrome.css if you want to suppress those icons.
Add code to [http://kb.mozillazine.org/UserChrome.css|userChrome.css] below the @namespace line.<br />
See http://kb.mozillazine.org/Editing_configuration#How_to_edit_configuration_files<br />
<pre><nowiki>@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
#personal-bookmarks .toolbarbutton-icon {
display:none !important;
</nowiki></pre> -
On my bookmarks toolbar, each bookmark has the associated webpage icon next to it. I would like to remove those icons, as they take up too much space.
ThanksThe icons, if you are familiar with them or they are obvious, take up less space than the words. You can abbreviate the names down to next to nothing or even nothing.
To save space and help organization you can group bookmarks into folders on your Bookmarks toolbar. -
HT1386 How can you stop the iPod from syncing photos ot it? It takes up too much space!!!!!
I just got an iPod and am setting things up, but I don't want it to sync my photos from my computer to the iPod as it takes up too much space. How do I stop it from syncing the photos?
See here: iOS and iPod: Syncing photos using iTunes
B-rock -
Upgraded to iPhoto '11, info tray takes up too much space?
Is there a way of resizing or moving the info tray from the side of screen to the bottom like '09 version?
Mostly interested in minimal view to see date, size of photo taken. Screen size on 13.3" so info bar takes up too much space.No. That feature is hard coded into the app. Send a feature request to Apple via http://www.apple.com/feedback/iphoto.html. The Command+i key combination can quickly open and close the Info tray to get it out of your way.
OT -
I have a whole bunch of CDs that I would like to import into iTunes. If I do that, would the songs still reside on my PC (which would take up too much space), or is there a way to get them "into the Cloud"? Thanks so much
Sign up to iTunes Match, though I'd consider investing in more storage. If space is a problem now then you're probably not backing up your existing media and content, which you should most certainly do.
tt2 -
I allocated too much space on the Windows side when using bootcamp and want to take some space back for the Mac side is there any easy way to do this?
Purchase and use Paragon Camp Tune
-
White MacBook takes too much time to boot up
Hi there.
I got the topcase(keyboard) of my MacBook repaired. (White MacBook 2006) and after that it takes nearly 7 up to 10 seconds after pressing the power button that I first see apple logo and it boots up.
I'm not sure but seems like that detecting the hardwares take too much time .
any solution?
PS: I'm running Snow Leopard(10.6.2)macbig wrote:
OK, 32 seconds is not good. I don't think it has anything to do with a keyboard repair. You need to try a little maintenance: Reset Pram - http://docs.info.apple.com/article.html?artnum=2238
Repair Permissions - http://support.apple.com/kb/HT1452
Run Disk Utility >applications>utilities>disk utilities>verify disk
How much free space do you have on your HD: Right click on HD icon and select "get info" in the drop down menu (if you don't have right click capabilities, highlight your HD icon, go file in the Apple menu, and select "get info" in the drop down menu. Let us know your results.
Yes PRAM was the the problem, I've already tried it from this thread http://discussions.apple.com/thread.jspa?threadID=2303507&tstart=0
by the way thank you . -
T400 takes too much time to start or shutdown
I got a lenovo thinkpad T400, everything seems to be fine but lot of issues.
1. It takes too much time to start or shutdown (I purchased 2GB turbo memory along with the system for $50, but no use).My system is slower than 2.2 GHz(mine is 2.53GHz)
2.Fingerprint Reader: When I tried to login using my fingerprint reader it gives an error message "computer is locked only authorized user can login", when we need to type in Password every time, why Finger print reader is used ?
Connectivity: All laptops around can see all networks but not mine, my system couldn't see any networks. Why ?
4. System strucks suddenly staying irresponsible for while.!!!!!!!!!!!
When I tried to talk to CSR, they instructed to format my system using the CD's which they are going to send.When I tried to do so; an error message occurred when I inserted second CD ,that "please insert suitable/matchable(don't remember exactly) CD.
I have other question; the CD's sent by lenovo are not AUTO PLAYABLE ?what if you press your blue thinkvantage button during startup? does it take you to the recovery partition?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft -
How do I get my iTouch to manually manage my music? I selected manually manage, yet every time I hook my iTouch to my computer, it attempts to sync and load my entire library. I do not want the entire library as it takes up too much space and I don't want all of those songs on my iTouch. What am I missing? What else can I do?
Oops, sorry, I think you probably already did what I suggested (turning off auto synch).
I have the same question - how to synch, say, just one playlist.
There is an option to synch only things that are checked. But everything (in every playlist and item, is checked and there doesn't appear to be a box to "uncheck all", nor can you check each playlist individually.
Maybe you are looking for
-
Cisco ASA 5505 Configurations. Help... Beyond Frustrated
Hello All, I'm fairly new to Cisco products and Network management in general. At my place of employment, I was hired as an IT Tech- Repair and Building computers, most aspects of Physical networking, and software refresh/upgrades as well as solving
-
[WebLogic Server 11g 10.3.3] Cannot Lookup CommonJ WorkManager ?
Hi, I am currently working on an application and going to use the Weblogic's CommonJ WorkManager; I tried the example in http://download.oracle.com/docs/cd/E14571_01/web.1111/e13733/toc.htm ; however I got an error javax.naming.ServiceUnavailableExce
-
Lookup value not getting populated...
I am using following xml code (copy.asmx > method CopyIntoItems). Per Microsoft http://msdn.microsoft.com/en-us/library/websvccopy.copy.copyintoitems(v=office.14).aspx I should be able to update lookup fields value as well because Lookup list is on t
-
Hi all, I'm having unix scripts for file validation.How and where to call this Unix scripts in ODI?Please be in steps. Advance thanks Suresh
-
How do I get a refund for 3.0 my computer has not installed it on my ipod yet, and apple refuses to update it for it, so how do I get a refund back? I also went to a apple store, they said I had to email them