Printing through J1IV automatically goes to spool

Hi Experts,
I am trying to print excise invoice through 'J1IV' (output type ZEXC, copy of JEXC). But, when I press the print button after selecting the invoice, the output automatically goes to spool. Is there any configuration we need to maintain to get the print output immediately, or any suitable SAP note available that will display a print pop-up dialog when one clicks on print.
PS. I have already checked the output type configuration, and default values in my user data. Maintenance is as desired
Thanks in advance,
Birendra

I am surprised to see, if I make the default output device in my user data blank, then this gets printed automatically.
However, this will hamper print output/s for other transactions, where the user will have to key in device name every time. Else, before taking a print from J1IV, this has to be made blank, and re-maintained once the print is taken. This cannot be my solution, because this would increase maintenance activity.
Waiting for Your valuable inputs,
Birendra

Similar Messages

Printing going to spool request

Hi
I tried to take print out for my excise invoice through (J1IV), It always going to spool request and not to printer which i have specified.
I checked with the settings in application V1 jexc condition type, it is set with print immediate.
Rgds
Srini

Go to SU01 and Check in Defaults tab Whether Default Printer is assigned and Output Immediately Option is Marked.
If you know Spool Request Number go to System / Services / Output Control Or SP01 and Here you can take print out.
Regards,
Ashok

Adobe form is going to Spool directly want a print preview

HI Experts,
I have created a class where I am calling a standard Material document print form WOST_WSGM_MATDOC_PDF but it is directly going to spool.
NOTE : I am calling this class method in one of my POWL Feeder class which is linked with standard GR print application and I want it to be previewed for user to save.
Please refer the code below.
DATA iv_funcname TYPE funcname.
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
    EXPORTING
      i_name              = 'WOST_WSGM_MATDOC_PDF'"gc_mat_doc_form_name
    IMPORTING
      e_funcname          = iv_funcname .
DATA iv_outputparams TYPE sfpoutputparams.
CALL FUNCTION 'FP_JOB_OPEN'
    CHANGING
      ie_outputparams = iv_outputparams
    EXCEPTIONS
      cancel          = 1
      usage_error     = 2
      system_error    = 3
      internal_error = 4
      OTHERS          = 5.
IF sy-subrc <> 0.
Implement suitable error handling here
ENDIF.
DATA fp_docparams TYPE sfpdocparams.
DATA fp_formoutput TYPE fpformoutput.
Now call the generated function module
CALL FUNCTION iv_funcname
    EXPORTING
      /1bcdwb/docparams = fp_docparams
      mat_doc_header     = es_mkpf
      doc_type_txt       = es_t003t
      vendor_data        = es_lfa1
      plant_data         = es_t001w
      move_plant_data    = es_t001w_move_plant
      mat_doc_item_tab   = et_mseg
      mat_doc_printgrgi = et_printgrgi
    IMPORTING
      /1bcdwb/formoutput = fp_formoutput
    EXCEPTIONS
      usage_error        = 1
      system_error       = 2
      internal_error     = 3
      OTHERS             = 4.
IF sy-subrc <> 0.
    CALL FUNCTION 'FP_GET_LAST_ADS_ERRSTR'
      IMPORTING
        e_adserrstr = ls_adserrstr.
ENDIF.
Close spool job
CALL FUNCTION 'FP_JOB_CLOSE'
    EXCEPTIONS
      usage_error    = 1
      system_error   = 2
      internal_error = 3
      OTHERS         = 4.
When I am running this class individual then I am getting the print preview but when I am running it through portal by calling it in the feeder class then It is going directly to SPOOL request.

try passing PREVIEW field "X" in FP_JOB_OPEN.
Uma

Unable to send spool request to printer through BSP

Hi Experts,
We have an application build on BSP and provided a button called print in the application. When I press print, in our client requirement, an adobe with details should create a spool as well it should print the document automatically.
Currently we some how managed to create a spool after pressing print but spool request is not going print automatically, its showing status as waiting with following error message
"Frontend unavailable"
Please help me out
Thanks in advance
Regards,
Sridhar

Hi,
this will not work!
If you print local, the GUI starts a local printing program. The browser is not able to start local programs, because of the restictions of Browsers.
To use Networkprinter should work.
Best regards
Renald

The PO was printed straight away without going through Release Strategy.

Hello,
Purchase order was raised in March for over Rs 1,000,000/- and went through the Release Strategy for printing.
The value of this order was changed today - about Rs 7,000/- was added in the purchase order.
The Purchase Order was printed straight away without going through Release Strategy,
In a customization we have maintained the Release strategy for the Purchase order
Please provide the solution on this issue.
Regards
Sarin
Edited by: sarin toms on Nov 26, 2008 1:57 PM

Dear,
Check at....OLME-->PO->Release Procedure->Configure Release procedure for PO> Release Indicator--> Pl. Check In Changebility of Release Procedure after release...here you have to give the option " 4".....and percentage of changebility also you have to take care...
Apart from that...in OLME--> Messages--> Message output---> Message determination...you have to fine tune your message type for Change mode...
Changeability 4 and percentage 0 will reset the release ONLY when the value of the PO increases. Any other change including decrease in value will not reset the release.
You can use the release user exit. If the PO is in change mode and Save option is selected, then increase the value in the user exit (This does not increase the PO value actually, just fools the release strategy into thinking that the value has increased).
Try with changeability 6 instead of 4. 4 will not reset the strategy if the PO is outputted (printed, emailed, etc)
Please refer the note 662993 and 365604
Regards,
R.Brahmankar

Acrobat CS3 won't print through XServe print server

Acrobat CS3 won't print through our XServe print server when connected by AppleTalk. Everything else prints fine. You can print the same .pdf with AppleTalk through Preview. And you can print with Acrobat through any other protocol but AppleTalk. The job spools, looks like it's going through but never reaches it's destination. We have 19 printers so it's not a single printer being cranky, and 35 Macs so it's not just a single Mac. All our users are on Active Directory and all are on the same subnet and VLAN.

Hello Scott,
If you look at the cups error log on the Xserve, does it give any clues as to why the Acrobat spool file is failing? Hopefully there is some indication as to which process is failing and why.
We're not using AppleTalk on our Xserve. All printer connections are set via LPR so I cannot offer any advice based on experience.
PaHu

HPLJ3055 won't print through HPxb3000, but will print if directly connected to dv9000.

HPLJ3055 won't print through HPxb3000, but will print if directly connected to dv9000.

Hey there @pepsitruck
I understand you cannot print from your desktop however, you can print from your laptop.
Could you please run the Print and Scan Doctor again and let me know the results or post a screen image of the results?
This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
You can also try manually stopping and restarting the print spooler and try printing from Notepad afterwards.
1. Click Start
2. Type "Services" in the search field.
3. Open SERVICES
4. At the bottom, click "Extended View"
5. Search for Print Spooler
6. Right-click it and choose Properties
7. Select as Automatic in the drop down box, close the Window
8. Right click on Print Spooler and choose "Stop", wait until it stops and then right click again and "Start".
9. Close out of Services and try your print again.
When you get to your response, please include which version of Windows you're running please.
Which Windows Operating System am I running?
Thank you,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Can't print through Time Capsule using Windows-operating computers

I've just bought a time capsule 500GB and it's working fine. It backups my macbook every hour and I can easily print whatever file I want through my Canon iP1800 series, which is connect to WAN port of my time capsule.
However, I have others 2 notebooks running windows, and I can't print from them wirelessly. I've installed the airport utility and Bonjour in both computers using the CD that came with my time capsule and I followed these instructions of an old topic here (_but it didn't work out_):
“1. Make sure the printer is recognized by the base station.
2. Select 'Add a new printer' in Windows
3. Select 'Local Printer' in the dialog box (auto detect and install
should be off), click next.
4. Choose 'Create a new port' and "Standard TCP/IP Port'. Click next.
5. For the printer IP address, enter the address of the base station 10.0.1.1. The port name will be filled automatically. Click next.
6. For the device type, choose 'Hewlet Packard Jet Direct', then click Finish.
Choose your printer from the list and follow the rest of the prompts to install and configure the driver.”
Do someone have any idea to tell me what's happening? How can I fix this problem and have Mac and Windows laptops printing through my time capsule?
Thanks

When you installed bonjour did the Bonjour Print Wizard appear on your desktop? Or in the program menu?
http://support.apple.com/kb/HT3052?viewlocale=en_US
In my personal experience Bonjour sometimes doesn't install properly and doesn't appear on either the desktop or program menu, particularly if it is installed at the same time as another piece of apple software. Each of the times this happened I removed bonjour, using Windows Setup:Add/Remove programs, and then downloaded it again individually.
If you have the same experience as me you'll then be asked if you want to install a shortcut to the printer wizard. The wizard has done the trick for me. I've not yet had to resort to the rather more complicated "add new printer" route.
Message was edited by: puzzlebobble

How to print two-sided automatically in Adobe Reader 10.1.2?

Hello, when I want to print two-sided with my printer I select this option:
And my printer does it automatically, I do not have to reload the paper.
However, in the new version of Adobe Reader, after selecting that option this one is automatically checked:
And I have to reload the paper manually:
Can the problem be solved? This did not happen in previous versions.
The printer is an HP P1606dn and I am using Adobe Reader 10.1.2. Sorry about the screen captures in spanish.
Regards

Hi, Shatik
Thanks for replying.
The DFS shares are mapped as a network drive. This is done just once using a batch file that uses the persistent switch. No roaming profiles, no username\application data path.
Since posting this I can now access PDF's, but many of our staff are now unable to scroll through an entire pdf without Adobe Reader hanging. Again, removing the checkmark in the protected mode option allows full scrolling of a pdf.
Disabling/enabling antivirus real-time scanning makes no difference.

Why does my PDF look so CRAPPY when I print through acrobat???

I have been having troubles with exporting a PDF from an Indesign file.. when I printed the exported PDF from acrobat, text was printing out very pixelated. I was exporting the file in indesign as a press quality pdf. The text looked fine when I viewed it in acrobat and zoomed in, but when I printed it out it looked very pixelated and not as black as it had when I had printed the file directly from indesign.
so this is what I've figured it out so far... I was exporting to PDF in indesign then opening it in adobe arobat pro and printing from there... for some reason when I went into my advanced print settings in acrobat, it was set to "print as image: 100 dpi." I changed it and it printed out better but not perfect. To double check it was adobe that was causing the issue, I opened and printed the pdf through mac preview. This looked perfect - - exactly like it did when I printed through INDD.
So my questions are, 1> WHY does it automatically printing as an image 100 dpi in adobe? and 2> how can I change this setting so when my client opens it up, they dont have to mess with any of the print settings to get it to look how it's supposed to? Is this a setting I can change when I save the file? I want to make sure it prints out correctly because one of the fonts used is ultralight and can look very very light if printed incorrecty. It looks perfect when I print through preview, but even printing as an image in 600 dpi through acrobat pro, the ultralight font looks lighter and more faded than it should (and than it does in the preview and INDD printed files). If i unselect the "print as image" checkbox, the ultralight text looks better but still not perfect. So that would make my second question >> WHY is the print quality worse when I print through adobe, and how can I remedy this? Any ideas??? Any help much appreciated!
**using acrobat pro 9.4.6 on mac osx 10.6.8

The PDF file itself does not control the "print as image" preference, which should always be turned OFF unless there's a specific need to rasterize the entire page, and is turned off by default in all Acrobat and Adobe Reader installations.
What's the filetype for the ultralight font and what export setting* are you using in ID? If you're exporting to earlier than PDF1.7, OpenType fonts will be converted and may experience some small changes in shape if their hint definitions aren't done right.
*As a side note, bear in mind that InDesign does not use any part of Acrobat when exporting PDFs, so questions specific to that stage in the process should be posted to the InDesign forums.

Trying to connect 2nd printer through Ethernet Port of AEX b/g

Hello all, Hello (maybe) Duane,
I do have a 2nd Airport Express b/g on our home network, and have a normal laser printer running as a wireless bonjour printer through that 2nd AEX, which is set up as a remote base station. I do have the Ethernet port free on that AEX, and want to connect a Brother 4040cn network ready color laser printer through the Ethernet port of this base station and use it as a bonjour printer? wirelessly... The AEX is set up as a remote base station to the main base station using WDS... I read a lot that the ethernet port only works when this station is in WDS mode - it is, but I still can't get it to work...
I talked to a guy at the Apple Store and he told me it should work, and that I somehow have to configure the Ethernet port of the AEX as a bridge so that could work.... ? It is not a supported solution (as expected...) so I tried to find that, but I am not able to work it out.
I can see the printer using the brother software, it shows me the status of the printer correctly, but I cannot get any printouts. The printing windows shows the printer, even lets me pick it as a bonjour printer, sends it off to the printer, but nothing arrives at the printer... I can use the web based printer management utility, which directly connects to the using the IP address, and can send stuff that is printed out, but i cannot get it working.
Hope that makes sense - anyone out there able to help?
Ningaloo

Hello,
If you wanted to setup a wireless network, you could look at some Wireless Ethernet USB adapters (will work just like the AirPort):
http://www.afterthemac.com/
Understand that the "AirPort" is just Apple's fancy name for Standard WiFi Networking. It's not anything special. Just Apple's implementation.
So, any WiFi Ethernet Adapter is going to be compatible with Apple's Airport network.
If you want to use the standard USB to Ethernet adapters, then you could look to see if you can find a suitable driver that will either enable your adapter (the one you just purchased) to work, or perhaps find an adapter that has a 3rd-party driver and then purchase that one. The following website lists Mac OS drivers that will enable "Windows-Only" adapters to work:
http://www.sustworks.com/site/newsusbethernet.html
The problem there, is that most USB to Ethernet (not wireless) adapters come only with Windows drivers. So, this website provides information and support to make those devices with with Mac OS X.
Otherwise, I have not found a pre-packaged USB to Wired Ethernet device that comes with Mac drivers.
But, the first website lists lots of USB to Wireless Ethernet adapters that come with Mac Drivers.
I hope this helps.
Let us know if you have other questions.
P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question.

Cheque printing through down payment F-48

Hi All
Can anyone tell me how can i print cheque after posting Down payment to vendor.
Details
Am posting down payment using F-47 and F-48 But clist is asking after executing this system has to print the cheque automatically.
Reply will be appreciated with full points
Thanks in advance
Sneha

Hi,
if u make down payment request through f-47 then run f110. Through F110, system print cheque.
Directly payment through f-48 then use t-code FBZ5 for cheque printing.
Regards,
Kalpik

Problem while printing through citrix

Dear Gurus ,
We are facing the problem during printing through citrix .
When we print locally without using citrix were able to get the proper print as it displayed in the spool .
But When we try to take the printout of document having say 12 colum , only 10 colums r coming asthe print out .
Please suggest as the views on this issue are valuable
Thanks in advance .
Chirag Kohli .

Hi
I am facing same problem
Please let me know if you get any solution
Thanks
Rakesh Patel
[email protected]

HP Officejet 6700 All in one - no longer able to print double sided automatically

My partner recently installed the updates for our PC. Since then, I have not been given the option of printing double sided automatically. Please help.

Hi @BBPT ,
Thank you for taking the time out of your day to ask that question on the HP Forums today!
You are saying that you are not getting the option to do double sided printing since your partner updated the printer software.
I understand you may be frustrated with this but, there is no way that the option is gone. It has just be relocated in the print prompt that is all. I encourage you to check settings and go through all the options when you choose to print. It is there. If you take screenshots and post them on this thread I will be able to show you were to go.
Let me know how I can help you. Have a great day!
I worked for HP.

Sharing a printer through MacPro to a Macbook Laptop?

How do I share my local printer through my MacPro to my MacBook? It is connected directly to my 2009 MacPro through an Ethernet cable and I want to be able to share it wirelessly to my MacBook Laptop, without a separate router. Given the connectivity and sharing abilities between Macs I am sure there is a way, but cannot figure it out or find the answer for the life of me.
Is this possible? If so, how would I go about setting it up?

You will need some sort of wireless router in order for this to work properly. However, you can try the following:
1. Turn on Printer Sharing in Sharing preferences on the MP.
2. Turn on your MP's wireless card (if you don't have one this won't work.)
3. Be sure you have the same printer driver installed on both computers.
4. Open Print & Fax on the MB and click the [+] button to add a printer.
5. When the Printer Setup Utility window opens you should see the printer listed in the Bonjour window (be sure to click on the Default icon in the toolbar.) It should appear as a "shared" printer.
6. Click on the printer then wait to see if the printer driver is "discovered" automatically. If not then locate the driver in the Print Using drop down menu and select it. Click on the Add button.
7. Test.
If this doesn't work (and it might not) then you will need to try turning on Internet Sharing in the MP's Sharing preferences. Share the Ethernet port to the Airport port (Airport card must be turned on.)
If this still doesn't work then you need to get yourself a wired/wireless router for your local network. If you already have one then connect the printer to one of the Ethernet ports on the router. This is by far the best way to do it.

Printing through J1IV automatically goes to spool

Similar Messages

Maybe you are looking for