Printing with BufferedImage and Text Quality

I am using PrinterJob to print text/graphics.
In my paint method, if we paint directly on the graphics handle using Graphics2D methods, the text quality is very good.
Our application has to manage a lot of data, and to handle the callabcks for the same page, we are painting to a BufferedImage, and then drawing the BufferedImage unto the graphics handle on the subsequent calls. The overhead to draw the page is significant, and this give us much better performance.
The PROBLEM IS, the quality of the text using the bufferedImage is like draft quality test, not the high resolution text we get when we paint directly on the supplied handle using the native drawing emthods every time.
Any idea how we can buffer the page image, and retain the text quality ?
In the paint we do:
m_Image = ((Graphics2D)pg).getDeviceConfiguration().createCompatibleImage(m_wPage,m_hPage);
m_Graphics = (Graphics2D) m_Image.getGraphics();

Culd u share the fix if u found one

Similar Messages

Flash and audio and text quality & Documentation/Manuals

Like a donut i posted in the wrong bit so here are the links
to my previous questions rather than duplicating them:
Documentation
/ Manuals
Flash
and audio and text quality
Apologies and thanks

There is no polite way to say this: You need training to
learn how to use Captivate to create learning objects for a LMS. It
doesn't need to be a "long" training period, but you are trying to
shortcut ALL training and begin at the end. I advise you learn to
use Captivate as a generator of learning objects (LO) for the LMS.
You seem to be thinking you can to use it as a "shell" for your
Flash output and it just isn't a Flash plug-in ... it is a
self-standing and sometimes complicated - but usually easy to learn
- learning tool in its own right (by "easy to learn" I don't mean
overnight, in any case).
Reasons why include the fact that Flash SWFs are vector based
while Captivate uses bitmapped graphics. Audio is handled entirely
differently on the two. Captivate's communication with the LMS is
not - I think - going to pass on scoring from the movie-in-a-movie
approach you are trying to use. And on and on.
Sorry I don't have more encouraging news for you. Good luck,
michelle.

Need to improve graphics and text quality

I'm looking for a tutorial or any document that will teach me how to improve graphics and text quality in Motion. Quality is extremely poor. With same settings, graphics and text quality in FCP is far better. Why?

The quality problems when using Motion titles in FCP usually result from a discrepancy in the Field Dominance/Field Order settings between the FCP timeline and the Motion project.
See if this post helps:
http://discussions.apple.com/click.jspa?searchID=-1&messageID=13075996
Patrick

I'm trying to share to Media Browser a 20 minute still slide show with music and text. I have tried several times to save at 1080 HD, but just before it's finished, a message box pops up saying "File already open with write permission." What's this mean?

I'm trying to finalize/share to Media Browser a 20 minute still slide show with music and text. I'd like to finalize it 1080 hd and have tried several times, but just before it's finished, a message box pops up saying it can't be done because "File already open with with write permission." What does this mean? All files are closed; this iMovie project is the only thing open. Does it mean one of the song files from iTunes? And should I just settle for saving it as a "large" file, which is what I'm trying right now?
Thanks,
Jamie

Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occours only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
See also this post
https://discussions.apple.com/thread/4434104?tstart=0
Yours Bengt W

HT4356 How can I print a greyscale/fast document from my iPad wireless printer. It will print in color and high quality but want black and white

How can I print a greyscale/black and white document from my iPad wireless printer???
IT will print in COLOR and high quality print but would like to conserve ink (Esp. Coloured )
is there a way to reconfigure settings either on my iPad or the printer ??? Cannot find a setting
when u select print on the ipad it dos not allow you to change your settings before you print

There is no setting for this. You can request it here:
http://www.apple.com/feedback/

Pdf files print with horizontal and vertical lines

All of a sudden, today, when I print pdf files, they print with horizontal and vertical lines. I thaught it was the computer or printer. So I printed from another computer on the network, and printed to a different printer with the same result. It is not just that one pdf file either, I have tried multiple files. HELP. Does anyone have any ideas?

It is not clear how you are creating the files. It appears that they were created by Distiller from PS files that were created in some way. I also noted that you are using AA8.1.0. You may want to try to update (do all the updates in order) as a possible fix. It may be in the creation process also. Several packages will split large graphics into parts and create the image. I think this is a characteristic of OFFICE 2007 (docx) files - but I am not sure yet. Tell us how you created the files - step by step, including the scan.
If you have the original documents, why not simply print to the Adobe PDF printer. The result would be smaller and a lot cleaner.

Pdf (with graphics and text) in the email body

When I place an pdf (with graphics and text) in the body of my email using Mac Mail my recipient sees them as attachments only. I am trying to find a way of presenting a formatted email with graphics that will appear the same way to all recipients, but a pdf frequently ends up being an attachment instead of staying in the body. The pdf file doesn’t seem to always show up in the body as created. Is there a better way to accomplish this?

You have no control over how your email maybe rendered by other email servers and client side software.
Attachment Tamer may give you a few more options but it does not guaranty the end result.

Can anyone recommend an alternative software programme to Pages? I have an OS X 10.7.5 macbook pro, so I am unable to get it. I want a programme that I can create docs with pictures and text on, invitations, posters etc. Many thanks in advance-..

Can anyone recommend an alternative software programme to Pages? I have an OS X 10.7.5 macbook pro, so I am unable to get it. I want a programme that I can create docs with pictures and text on, invitations, posters etc. Many thanks in advance…..

LibreOffice

Trouble Printing with CS4 and Epson

I wish to print a 13x19 photo on my Epson Photo Stylus R3000. After entering all the info correctly with paper size, type, quality, etc I get a print with a one inch blank border on the top and bottom. I called Epson and they said it was not their problem, it must be something with Adobe. I am using Photoshop CS4 and Windows 7. Help, please. Doro

So, I found this little piece of info on Epson's site, the question doesn't quite match our problem, but the answer (you would think) would fix us...
Q: I don’t see my printer driver on the Epson Macintosh Snow Leopard Support page. Where can I find a Mac OS 10.6.x driver for my product?
A: Try the following:
Rosetta needs to be installed in Snow Leopard. If necessary, install Rosetta.
Go to Drivers & Support, select your product category, then select your product name.
Select Drivers & Downloads, then select Macintosh Operating Systems from the drop-down list and click Go.
Download the Macintosh 10.5.x drivers for your product.
Note: If there are no Macintosh OS X 10.5.x drivers available for your product, download and install the Macintosh OS X 10.4.x drivers and the Common Updater software for your product.
Follow the on screen instructions to finish the driver installation.
I followed the instructions to the letter.... no results, I still don't see the driver in the drop-down list of available Printer Drivers!

Printing with Aperture and HP B9100

I am new to Aperture. I just purchased the new 24" iMac and have installed Aperture and a new HP B9100 Pro Printer. I have been making test prints directly from Aperture with photos taken on a Nikon D80. None of the prints have come out anywhere near close to how good things look on my monitor. The prints are darker and lack the vividness and detail I see on my screen.
I got better prints from iPhoto and my Canon MP780.
Any suggestions? I apologize for being so green about this stuff.
Thanks.
Roger
24" iMac Mac OS X (10.4.8)
24" iMac Mac OS X (10.4.8)

I have the HP D7160 (uses six inks). I had the same problem, until I spent countless hours testing different parameters.
I had problems with Aperture printing too muddy/dark until I did the following:
On an HP Photosmart D7160:
In Aperture, I have the "system management" as my Color Sync preference. Printer gamma set to 1.25 Black comp "on"
In my printer dialog, there is a dropdown menu when you select "print". Under the printer presets, I select "Paper type/quality". In this dropdown, there is a selection for Paper: Color:- I select "Color Sync" (not the printer selected "ColorSmart/RGB")
I also go to the "Color Options" tab and decrease my magenta output to -5.
I saved this as a "HP D7160" preset, so whenever I print, it automatically changes these for me.
Works like a charm now, after a lot of trial and error.

Want to send a email with images and text in the body of email in iOS

In iOS, we have written a code to send an email, with embedded images and text in the body of the email ( not attachment) using mail composer. It works well with iOS devices like iPhone and iPad, but does not work in window based OS. Can anybody help. The code is

Thanks James !, do you have an idea how to find the window resource which I belive will be included in our appllication pack.
In above I have missed to copy the code,below is the code. This might help you to help me.
NSMutableString *imgContent = [[[NSMutableString alloc] initWithString:@"<html><body>"] retain];
UIImage *imageData = [UIImage imageNamed:@"Midhun.png"];
NSData *imageDataInBase64 = [NSData dataWithData:UIImagePNGRepresentation(imageData)];
NSString *base64String = [imageDataInBase64 base64EncodedString];
[imgContent appendString:[NSString stringWithFormat:@"<p><b><img src='data:image/png;base64,%@'></b></p>",base64String]];
[imgContent appendString:@"</body></html>"];
MFMailComposeViewController *emailWin = [[MFMailComposeViewController alloc] init];
[emailWin setMessageBody:imgContent isHTML:YES];

Share printer with XP and Vista

I have an HP psc 2110xi connected to a PC running XP. This PC is connected (hardwired) to a Linksys wireless router. Another PC running Vista is connected to the wireless network. I am trying to share the printer with the Vista PC. Is this possible??????I fear it is not but await confirmation from any guru willing to commit him/her self.........

hello,
yes, it is possible since your host computer is the XP. make sure the firewall is turned off. try to ping the computer first with each other to make sure that the computers are communicating well with each other.
go to printers and faxes
right click on the printer driver and click Sharing.
put a check mark on Share this printer.
take note of the share name.
then from your vista computer type \\ xp ip address.
for example, \\192.168.1.100
the printers and faxes window of the XP will show up.
right click on the driver and click Connect.
try to print.
keep me informed please..

Pin names and numbers do not print with black and white printer setup option

Multisim V12
Printer HP LaserJet 1320
File -> Print Options -> Print Sheet Setup, check In black/white, OK
Then
File -> Print Preview, shows all elements of the drawing in black white
Then select Print and the drawing prints without pin names and pin numbers.
The same procedure with the black/white unchecked previews in color and then prints all circuit elements

Hi HiZTrace,
I used Multisim 12 with the same configuration and printed with a HP LaserJet 4250, but it seemed to be working well for me. There could be some incompatibility issue with your printer driver. A workaround you can try is to install a PDF Converter and print the file in color, then print the generated PDF file in black and white. There are many PDF Converters available, for example, CutePDF Writer (free)
Sorry for the inconvenience.
Derek Z.
National Instruments

HP 6940 suddenly printing with lines and red hue

Hello,
I was printing photos tonight with my 6940 and suddenly the photos started coming out with the first half (left sides) printed correctly, and the right half has a red hue and striated lines. I thought the black cartridge might be out, so I replaced it and the photos are coming out the same. I've just replaced the color cartridge a few weeks ago, so it is not empty. Any suggestions?
I tried printing 5 photos, and all came out the same way - left side is printed correctly, right side is ruined.
Right-click here and choose "Save As" to download a high res photo of the photos as they are coming out of the printer.
-Gina

Hi CrazySaguaro,
It appears as if your colour cartridge is out of ink. If this is the case you should be able to see this in your ink gauge through the driver tool box.
Here is steps how to check this
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00575972&lc=en&cc=us&dlc=&product=467980
it is located approx half way down the page
Please let me know what you find out.
Although I am an HP employee, I am speaking for myself and not for HP

Problem to print with iPhoto and epson stylus photo RX620

I asked a question about the print with Iphoto. Larry gave some explainations but it still doesn't work. I can change the reglages with Safari, with Mail but not with Iphoto. So when I try to print photos, the reglage is standard and the result is bad. I would like to change the reglage, if i use glassy photo paper. With my PC, I have no problem to print with window or picassa. Thanks for your answer.

First I have no idea in the world what "reglage" is
But what ever printer specific options are available are supplied by the manafacturer's print driver and these are available on the last print window
LN

Printing with BufferedImage and Text Quality

Similar Messages

Maybe you are looking for