Printing WWI reports for an Accident using tcode CBIH102

I have to write a RFC to print a wwi report for an accident. I've identified FM CVEA_RDOS_CREATE_BY_EHS as the function module that will trigger the printing.
FM CVEA_RDOS_CREATE_BY_EHS contains a table parameter X_DDO_TAB_TYPE which contains the table fields values, class characteristics values for values fields specified in WWI template and will be used by the WWI generation server to create the report.
I'm trying to identify the function module that extracts the contents of table parameter X_DDO_TAB_TYPE from the WWI template..
If any info is available that would save me a lot of debugging time.

Form L_VARIANTS_PRINT or L_REPORTS_PRINT in FG C1G2

Similar Messages

Interactive Reports for Marketing Campaigns using HANA

Dear Experts,
We are Implementing Interactive Reports for Marketing Campaigns using HANA Hence, I request you all to help with the Config Steps / any documents that help.
Your Help is really appreciated.
Thanks In advance
Satish

David,
There are several drawbacks with the standard functionality that you will encounter:
- SAPconnect only supports HTTP url posting or RFC destination setup (which means you need a third party server program)
- The mail forms do not impose a limitation on the length of messages
- Target groups do not check if the person has a mobile number.
If you look at SMS gateway providers they normally allow use via web service or SMPP. If you plan on doing "bulk" campaigns where you will generate multi-thousand messages a month then you need to use one of these options. SMPP is a binary protocol that is way too complicated for a business application to implement. So web services is your best bet.
If we used mostly standard CRM functionaliy we would do the following for SMS:
- Use the segment builder to handle our target groups
- Use the personalized mail functionality
- Use the open channel exits for segment execution to handle the communication to SMS gateway.
Now keep in mind that for SMS campaigns this is going to be cubersome, and not going to provide all the mobile marketing functionality you need. It still appears that even for CRM 52/2007 that mobile marketing is not really fully addressed in the solution with several major gaps.
We ended up going down a custom route, because the segment builder was not-user friendly and unstable in CRM 40 and the mail form technology did not meet our needs for sending messages and creating template based scenarios. We still make use of the CRM business partner master for the distribution.
If you have any further questions on doing SMS campaigns with CRM, please let me know. This is one area where I have spent some extensive research. If you are looking for SMS gateway providers in the US, I can also provide some names based on our previous research.
Thank you,
Stephen

Project Report for One Project Using Excel

Hi,
Is is possible to create a report for one project using excel?
I want to create a pdp with an Excel Viewer web part and have the following tabs with data specific to the one project.
1. Cover
2. Issues
3. Risks
4. Deliverables
I tried passing the ProjUid to an Excel doc via the Excel Query Filter Web Part and was able to filter the Issues lists only but don't know if its possible to filter out the other tabs by using the same paramater. Is this possible?
I have not looked at Odata but was wondering if it was possible to pass a paramater to the odata query and still have the spreadsheet work in a web view in SharePoint?

Hi,
I'd say that as far as you promote the Proj UID field as a filter in all sheets of your Excel workbook, using the Excel
Query Filter Web Part should work fine. But testing it should be easy, since you already did half of the work.
See excellent article from Andrew on this topic:
http://azlav.umtblog.com/2012/12/05/filtering-excel-webparts-in-office-365-part-2/
http://azlav.umtblog.com/2012/07/03/creating-a-project-resource-list-in-a-pdp/
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Implement workflow process for material reservation using tcode IW32

Hi
How can I implement workflow process for material reservation using tcode IW32
- PM order.
Thanks,
Amos

Hi;
Have been able to find the solution to create the IDoc MRESCR after entering a reservation?
I am in the same situation and I do not see the IDoc output in the BD87.
It would be nice if you share the solution.
Thanks in advance

How to add new tab after reason for rejection tab using tcode va01

Hello,
how to add new tab after reason for rejection tab using tcode va01.

Hi,
You can check this link...
Hope it will be helpful to you.
[https://forums.sdn.sap.com/click.jspa?searchID=23016273&messageID=6825861]
[http://www.sapdevelopment.co.uk/enhance/fexits.htm]
-Maharshi
Edited by: Maharshi Vyas on Mar 3, 2009 12:45 PM

Payment advice for multiple vendor using tcode F110

Hi all
I am facing problem while printing payment advice program for Multiple vendors using transaction F110. If I passed single or multiple vendor , I am getting only single vendor payment advice details ( if I passed more than one vendor also) .I need solution for multiple vendors .
Tcode : F110
Program : RFFOD__U .
How to print multiple vendor for payment advice details.
pls provide the solution for this..
waiting for Reply.

I have used different program RFFOD__S. It was working fine.

CRVS2010 Beta - Problems with printing Crystal Reports for VS 2010

Good afternoon,
We have the following problem, we used the version of Crystal Reports that came integrated with visual studio for several years. But we are migrating to the version of Visual Studio 2010, and we are using the version of Crystal Reports for this same version, running on screen is correct, and run all the reports, but in print there is a failure we could not solve. Our customers use printers dot matrix as the "Epson LX300 +", but when you print the report leaves the impression defective in the previous version of Visual Studio 2005 "The impression is quite clear, we have attempted to overcome this problem with the options of PrintMode with activex and pdf in the CrystalReportViewer, and RenderingDPI option with multiple values. Obviously when using other types of printers such as laser or inkjet printing is perfect, but due to cost our customers use the printers mentioned. The server where the application is Windows server 2008 and client computers are windows xp, windows 7, windows vista. As network hardware and printers are working properly, and from other applications and from the other server with versions of Crystal Reports If anyone knows how to solve this problem I would like to receive support and ideas.
Thanks
Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
Edited by: Ludek Uher on Oct 11, 2010 3:42 PM

I have a question about printing reports. We are using VS2008 and the CR reportviewer with printmode = ActiveX. Many of our users absolutely hate the number of steps they must go through and the time it takes to print a Crystal Report when printmode = PDF. In our environment several times per day, we need to produce hard copies of reports for legal reasons. Making the users first render the report, then had it off to Adobe to print simply takes too much time which is why we are using the ActiveX print control.
We recently started looking at VS2010 and discovered the issue with the unbundling of Crystal Reports. We have not downloaded CR for VS2010 yet.
My question is this: for VS2010, what happened to the ActiveX print control? I read somewhere that it was going to become some WPF-type thing but there weren't many details about that. So when a user clicks on the print button in the Crystal Report Viewer intended for VS2010, what can they expect? Can they still print straight to a printer (is there something that gives them this capabitliy like the Active X print control did?), or has that capability been deprecated and they have to go through PDF? Thanks in advance for any information you can give me.

How Can I print my report through character mode using DOS, very very urgent

Hi all
I would like to print my reports instead of from windows based, I want to print through DOS mode. While giving dos mode printouts report builder is hanging and comming out. Any help will be appreciated.
Thanks
Reddy

Hi Reddy,
Here is the solution.
At Dos\> ORACLE_HOME\BIN\RWRUN60 <followed by the report name and desired arguments >
srini

How add new tab after reason for rejection tab using tcode va01

Hello,
How to add new tab after Reason for Rejection tab using tranzaction code VA01.
pls suggest solution.

I don't think you can add a tab after reason for rejection tab. There are custom tab, which you can use for your convenient, given by SAP. You can look into the below details:
Program : SAPMV45A
Screen: 8459(Item) and 8309(Header).
Kuntal.

Auto print out report for java application

Hi, Now i'm using eclipse 3.2 to develop a java application and using crystal report to create report.I would like to directly printing out the report from the java application.what the installer or plugin i need?What the setting i need to set? Can you give me the sample coding to directly print out the report from java application by passing parameter?Thanks,Hui Bee

There is a Consulting Solution called BOInterface that Business Objects Global Services sells and that helps you to achieve what you describe very easily.
A description is <a href="http://www.mnsoft.org/bointerface0.0.html">here</a>.
Particularly, see the <a href="http://www.mnsoft.org/boxinterfacedocs/com/bo/boxinterface/boreport/scheduler/BOReportSchedulerPrinter.html">BOReportSchedulerPrinter</a>. BOInterface comes with a complete example on scheduling to printer; that example can even itself be scheduled.
Contact me via direct email for more information if this is interesting for you.
HTH,
M
Matthias Nott - Business Objects
Service Line Leader Products EMEA
[email protected]

Issue in Selection Screen of ABAP report after executing it using TCode

Hi,
I have one Z program having a selection screen for it. One selection variable is non editable for the users (has default value) whereas user can enter the value in other selection variable.
To make the first variable non editable, I have used the following code.
INITIALIZATION.
LOOP AT SCREEN.
    IF screen-name = 'P_USER'.
      screen-input = 0.
      MODIFY SCREEN.
    ENDIF.
ENDLOOP.
Now when I execute this program from SE38, it works fine. But when I execute it using a Tcode (assigned in SE93), the first variable also become editable for users.
How can I keep the first variable non editable even after executing the program using a Tcode?
Regards,
Yogesh

Hi,
It seems you create a Transaction type: Dialog transaction.
Delete current transaction and create one with Transaction type: Report transaction (radio button in row 2nd)
regards,

ALV report for 5 Grids using Objects and Method

I have few questions in ALV 5Grids ,could you please correct me in the following program logic...
Using this program logic i am able to generate the five Grids and able to populate Header details from VBAK into Grid1,If you click in the Grid 1 and it is populating item details in Grid2 from VBAP,parallally populating the customer data in Grid5 from KNA1.
Now the pending issue is ,
if you click in the Grid2 then we should populate the shipping details in Grid3 and
if you click in the Grid3 then we should populate the billing details in Grid4.
Program Logic;
REPORT ZAREPAS20.
Tables : vbak,vbap,likp,lips,vbrk,vbrp,kna1.
DATA : OK_CODE LIKE SY-UCOMM,
 G_CONTAINER TYPE SCRFNAME VALUE 'BCALV7_GRID_DEMO_0100_VASU',
 DOCKING TYPE REF TO CL_GUI_DOCKING_CONTAINER,
 SPLITTER_1 TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
 SPLITTER_2 TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
 splitter_3 TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
 CELL_TOP1 TYPE REF TO CL_GUI_CONTAINER,
 CELL_BOTTOM1 TYPE REF TO CL_GUI_CONTAINER,
 CELL_TOP2 TYPE REF TO CL_GUI_CONTAINER,
 CELL_BOTTOM2 TYPE REF TO CL_GUI_CONTAINER,
 CELL_LEFT TYPE REF TO CL_GUI_CONTAINER,
 CELL_middle TYPE REF TO CL_GUI_CONTAINER,
 CELL_RIGHT TYPE REF TO CL_GUI_CONTAINER,
 GRID1 TYPE REF TO CL_GUI_ALV_GRID,
 GRID2 TYPE REF TO CL_GUI_ALV_GRID,
 GRID3 TYPE REF TO CL_GUI_ALV_GRID,
 GRID4 TYPE REF TO CL_GUI_ALV_GRID,
 GRID5 TYPE REF TO CL_GUI_ALV_GRID.
DATA : GT_VBAK TYPE STANDARD TABLE OF VBAK,
 GT_VBAP TYPE STANDARD TABLE OF VBAP,
 GT_LIKP TYPE STANDARD TABLE OF likp,
 GT_LIPS TYPE STANDARD TABLE OF lips,
 GT_VBRK TYPE STANDARD TABLE OF vbrk,
 GT_VBRP TYPE STANDARD TABLE OF vbrp,
 GT_KNA1 TYPE STANDARD TABLE OF kna1.
DATA:begin of itab1 occurs 0,
 vbeln type likp-VBELN,
 erzet type likp-ERZET,
 lfart type likp-LFART,
 posnr type lips-POSNR,
 END OF ITAB1.
DATA:begin of itab2 occurs 0,
 vbeln like vbrk-vbeln,
 posnr like vbrk-fktyp,
 fkart like vbrk-fkart,
 fklmg like vbrp-fklmg,
 end of itab2.
*selection screen for selecting range of values
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE text-001.
select-options: S_vbeln for VBAK-vbeln.
selection-screen end of block b1.
 CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
 CLASS-METHODS:
 handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
 IMPORTING
 e_row
 e_column
 es_row_no
 sender. " sending control, i.e. ALV grid that raised event
ENDCLASS. "lcl_eventhandler DEFINITION
 CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD HANDLE_DOUBLE_CLICK.
*DEFINE LOCAL DATA.
DATA : itab_vbak type VBAK,
 itab_vbap type VBAP,
 itab_likp type likp,
 itab_lips type lips,
 itab_vbrk type vbrk,
 itab_vbrp type vbrp,
 itab_kna1 type kna1.
*DISTINGUISH ACCORDING TO SENDING GRID INSTANCE
CASE SENDER.
WHEN GRID1.
 READ TABLE gt_VBAK INTO itab_vbak INDEX e_row-index.
 CHECK ( itab_vbak-vbeln IS NOT INITIAL ).
 CALL METHOD GRID1->set_current_cell_via_id
 EXPORTING
 is_ROW_ID =
 is_COLUMN_ID =
 is_row_no = es_row_no.
 Triggers PAI of the dynpro with the specified ok-code
 CALL METHOD cl_gui_cfw=>set_new_ok_code( 'ORDER_DETAILS' ).
WHEN GRID2.
 READ TABLE gt_VBAP INTO itab_vbap INDEX e_row-index.
 CHECK ( itab_vbap-vbeln IS NOT INITIAL ).
 CALL METHOD GRID2->set_current_cell_via_id
 EXPORTING
 is_ROW_ID =
 is_COLUMN_ID =
 is_row_no = es_row_no.
 Triggers PAI of the dynpro with the specified ok-code
 CALL METHOD cl_gui_cfw=>set_new_ok_code( 'ORDER_DETAILS' ).
WHEN GRID3.
 READ TABLE gt_LIPS INTO itab_LIPS INDEX e_row-index.
 CHECK ( itab_lips-vgbel IS NOT INITIAL ).
 CALL METHOD GRID3->set_current_cell_via_id
 EXPORTING
 is_ROW_ID =
 is_COLUMN_ID =
 is_row_no = es_row_no.
 Triggers PAI of the dynpro with the specified ok-code
 CALL METHOD cl_gui_cfw=>set_new_ok_code( 'DELIVERY_DETAILS' ).
WHEN GRID4.
 READ TABLE gt_VBRP INTO itab_VBRP INDEX e_row-index.
 CHECK ( itab_vbrp-vgbel IS NOT INITIAL ).
 CALL METHOD GRID4->set_current_cell_via_id
 EXPORTING
 is_ROW_ID =
 is_COLUMN_ID =
 is_row_no = es_row_no.
 Triggers PAI of the dynpro with the specified ok-code
 CALL METHOD cl_gui_cfw=>set_new_ok_code( 'BILLING_DETAILS' ).
WHEN GRID5.
 READ TABLE gt_KNA1 INTO itab_KNA1 INDEX e_row-index.
 CHECK ( itab_kna1-kunnr IS NOT INITIAL ).
 SET PARAMETER ID 'KUN' FIELD itab_KNA1-KUNNR.
 CALL TRANSACTION 'MM02' AND SKIP FIRST SCREEN.
 WHEN OTHERS.
 RETURN.
 ENDCASE.
endmethod.
endclass. "lcl_eventhandler IMPLEMENTATION
start-of-selection.
*write :/ 'FEDEX INT''''L' .
SELECT * FROM vbak INTO TABLE gt_VBAK
where vbeln IN S_VBELN.
creating docking container
create object docking
 exporting
 parent = cl_gui_container=>screen0
 ratio = 90
exceptions
 others = 6.
if sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Create splitter container
CREATE OBJECT splitter_1
 EXPORTING
 parent = docking
 rows = 1
 columns = 3
 NO_AUTODEF_PROGID_DYNNR =
 NAME =
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 OTHERS = 3.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Get cell container
CALL METHOD splitter_1->get_container
 EXPORTING
 row = 1
 column = 1
 RECEIVING
 container = cell_left.
CALL METHOD splitter_1->get_container
 EXPORTING
 row = 1
 column = 2
 RECEIVING
 container = cell_middle.
CALL METHOD splitter_1->get_container
 EXPORTING
 row = 1
 column = 3
 RECEIVING
 container = cell_right.
Create 2nd splitter container
CREATE OBJECT splitter_2
EXPORTING
 parent = cell_left
 rows = 2
 columns = 1
 NO_AUTODEF_PROGID_DYNNR =
 NAME =
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 OTHERS = 3.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Get cell container
CALL METHOD splitter_2->get_container
 EXPORTING
 row = 1
 column = 1
 RECEIVING
 container = cell_top1.
CALL METHOD splitter_2->get_container
 EXPORTING
 row = 2
 column = 1
 RECEIVING
 container = cell_bottom1.
Create 3rd splitter container
CREATE OBJECT splitter_3
 EXPORTING
 parent = cell_middle
 rows = 2
 columns = 1
 NO_AUTODEF_PROGID_DYNNR =
 NAME =
 EXCEPTIONS
 cntl_error = 1
 cntl_system_error = 2
 OTHERS = 3.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Get cell container
CALL METHOD splitter_3->get_container
 EXPORTING
 row = 1
 column = 1
 RECEIVING
 container = cell_top2.
CALL METHOD splitter_3->get_container
 EXPORTING
 row = 2
 column = 1
 RECEIVING
 container = cell_bottom2.
Create ALV grids
CREATE OBJECT grid1
 EXPORTING
 i_parent = cell_top1
 EXCEPTIONS
 OTHERS = 5.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT grid2
 EXPORTING
 i_parent = cell_bottom1
 EXCEPTIONS
 OTHERS = 5.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT grid3
 EXPORTING
 i_parent = cell_top2
 EXCEPTIONS
 OTHERS = 5.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT grid4
 EXPORTING
 i_parent = cell_bottom2
 EXCEPTIONS
 OTHERS = 5.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT grid5
 EXPORTING
 i_parent = cell_right
 EXCEPTIONS
 OTHERS = 5.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Set event handler
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid1.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid2.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid3.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid4.
SET HANDLER: lcl_eventhandler=>handle_double_click FOR grid5.
Display data
CALL METHOD grid1->set_table_for_first_display
 EXPORTING
 i_structure_name = 'VBAK'
 CHANGING
 it_outtab = gt_VBAK
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH: gt_vbap.
CALL METHOD grid2->set_table_for_first_display
 EXPORTING
 i_structure_name = 'VBAP'
 CHANGING
 it_outtab = gt_VBAP " empty !!!
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH: gt_LIPS.
CALL METHOD grid3->set_table_for_first_display
 EXPORTING
 i_structure_name = 'LIPS'
 CHANGING
 it_outtab = gt_LIPS " empty !!!
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH: gt_VBRP.
CALL METHOD grid4->set_table_for_first_display
 EXPORTING
 i_structure_name = 'VBRP'
 CHANGING
 it_outtab = gt_VBRP " empty !!!
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH: gt_KNA1.
CALL METHOD grid5->set_table_for_first_display
 EXPORTING
 i_structure_name = 'KNA1'
 CHANGING
 it_outtab = gt_KNA1 " empty !!!
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Link the docking container to the target dynpro
CALL METHOD docking->link
 EXPORTING
 repid = syst-repid
 dynnr = '0100'
 CONTAINER =
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
NOTE: dynpro does not contain any elements (ok_code -> GD_OKCODE)
CALL SCREEN '0100'.
Flow logic of dynpro:
*PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
*PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
end-of-selection.
*& Module STATUS_0100 OUTPUT
 text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
SET TITLEBAR 'xxx'.
Refresh display of detail ALV list
CALL METHOD grid2->refresh_table_display
 EXPORTING
 IS_STABLE =
 I_SOFT_REFRESH =
 EXCEPTIONS
 OTHERS = 2.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Refresh display of detail ALV list
CALL METHOD grid3->refresh_table_display
 EXPORTING
 IS_STABLE =
 I_SOFT_REFRESH =
 EXCEPTIONS
 OTHERS = 2.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Refresh display of detail ALV list
CALL METHOD grid4->refresh_table_display
 EXPORTING
 IS_STABLE =
 I_SOFT_REFRESH =
 EXCEPTIONS
 OTHERS = 2.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Refresh display of detail ALV list
CALL METHOD grid5->refresh_table_display
 EXPORTING
 IS_STABLE =
 I_SOFT_REFRESH =
 EXCEPTIONS
 OTHERS = 2.
IF sy-subrc eq 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
 text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK' OR
 'EXIT' OR
 'CANCEL'.
 SET SCREEN 0.LEAVE SCREEN.
USER HAS PUSHED BUTTON "DISPLAY OREDERS"
 WHEN 'ORDER_DETAILS'.
 PERFORM ORDER_SHOW_DETAILS.
 when 'DELIVERY_DETAILS'.
 PERFORM DELIVERY_SHOW_DETAILS.
 WHEN 'BILLING_DETAILS'.
 PERFORM BILLING_SHOW_DETAILS.
 WHEN OTHERS.
ENDCASE.
CLEAR : OK_CODE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form ORDER_SHOW_DETAILS
 text
--> p1 text
<-- p2 text
FORM order_show_details .
define local data
DATA:
 ld_row TYPE i,
 itab_VBAK TYPE VBAK.
CALL METHOD grid1->get_current_cell
 IMPORTING
 e_row = ld_row.
READ TABLE gt_VBAK INTO itab_VBAK INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT * FROM KNA1 INTO TABLE gt_KNA1
 WHERE KUNNR = itab_VBAK-KUNNR.
SELECT * FROM VBAP INTO TABLE gt_VBAP
 WHERE VBELN = ITAB_VBAK-VBELN.
*REFRESH: gt_LIPS.
ENDFORM. " ORDER_SHOW_DETAILS
*& Form DELIVERY_SHOW_DETAILS
 text
--> p1 text
<-- p2 text
FORM DELIVERY_SHOW_DETAILS .
define local data
DATA:
 ld_row TYPE i,
 itab_VBAP TYPE VBAP.
CALL METHOD grid1->get_current_cell
 IMPORTING
 e_row = ld_row.
READ TABLE gt_VBAP INTO itab_VBAP INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT LIKPVBELN LIKPERZET LIKPLFART LIPSVBELN
 INTO CORRESPONDING FIELDS OF TABLE ITAB1
 FROM ( LIKP INNER JOIN LIPS ON LIKPVBELN = LIPSVBELN )
 WHERE LIKP~VBELN IN S_VBELN.
*REFRESH: gt_LIPS.
ENDFORM. " DELIVERY_SHOW_DETAILS
*& Form BILLING_SHOW_DETAILS
 text
--> p1 text
<-- p2 text
FORM BILLING_SHOW_DETAILS .
define local data
DATA:
 ld_row TYPE i,
 itab_LIPS TYPE LIPS.
CALL METHOD grid1->get_current_cell
 IMPORTING
 e_row = ld_row.
READ TABLE gt_LIPS INTO itab_LIPS INDEX ld_row.
CHECK ( syst-subrc = 0 ).
SELECT VBRKVBELN VBRKFKTYP VBRKFKART VBRPFKLMG
 INTO CORRESPONDING FIELDS OF TABLE ITAB2
 FROM ( VBRK INNER JOIN VBRP ON VBRKVBELN = VBRPVBELN )
 WHERE VBRK~VBELN IN S_VBELN.
ENDFORM. " BILLING_SHOW_DETAILS

Hi,
ALV means ABAP List Viewer. Most convenient way to use it is through reuse library (cf.
transaction se83) available from release 4.6 of SAP R/3.
ALV is available in two modes: list and grid. List mode is good old list processing with
standard functionnalities, and grid mode is using a new OCX object displaying grids.
Classical reports needs more coding to set the horizontal and vertical lines.we need to adjust
the lines manually.Even interactive also takes lot of code.
ALV reports reduces the code when compared to classical reports.we use function modules to
generate the output.
that r REUSE_ALV_LIST_DISPLAY,REUSE_ALV_GRID_DISPLAY,REUSE_ALV_HIERSEQ_LIST_DISPLAY etc..
the following threads will give some examples of the functions which you are expecting
Header
regarding function module
hide ALV field
Simply Display selection parameter values in the ALV OUTPUT
Drag and drop in a report
https://www.sdn.sap
Reprots
http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you
use - ABAP Objects calls or simple function modules.

Print in foreground for 4 alv using splitter

hi All,
I have created a program which displays 4 different alvs on a single screen .
I have used one container and 4 splitters to display the alv.
after the program is executed ,there is a button (print) through which all 4 alvs
should be sent to a spool.
and that spool needs to be printed.
i am unable to implement the above requirement.
i tried passing print parameter in all the 4 alvs but then also
one the 1st alv prints .
i need to print all the 4 alvs

Hi Pallavi,
Rather splitting the single screen into 4 , create 4 custom containers and then fron one print you can get all the data of the four ALV data.
For reference you can go through the example.
Hi,
first place three CUSTOM CONTROLLERS in one screen layout.
try this code.
DATA: O_CONT1 TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
       O_CONT2 TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
       O_CONT3 TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
DATA: O_GRID1 TYPE REF TO CL_GUI_ALV_GRID,
       O_GRID2 TYPE REF TO CL_GUI_ALV_GRID,
       O_GRID3 TYPE REF TO CL_GUI_ALV_GRID.
DATA: IT_VBRK LIKE VBRK OCCURS 1 WITH HEADER LINE,
       IT_VBRP LIKE VBRP OCCURS 1 WITH HEADER LINE.
PARAMETERS: P_VBELN LIKE VBRK-VBELN.
START-OF-SELECTION.
   PERFORM GET_DATA.
   SET SCREEN 100.
*&      Form GET_DATA
*       text
FORM GET_DATA .
      SELECT *
            FROM VBRK
            INTO TABLE IT_VBRK
            WHERE VBELN = P_VBELN.
   SELECT *
     FROM VBRP
     INTO TABLE IT_VBRP
     WHERE VBELN = P_VBELN.
ENDFORM.                    " GET_DATA
*&      Module STATUS_0100 OUTPUT
*       text
MODULE STATUS_0100 OUTPUT.
   SET PF-STATUS 'MENU'.
   PERFORM SHOW_GRIDS.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE USER_COMMAND_0100 INPUT.
   CASE SY-UCOMM.
     WHEN 'BACK'.
       LEAVE PROGRAM.
   ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Form SHOW_GRIDS
*       text
FORM SHOW_GRIDS .
   IF O_CONT1 IS INITIAL.
     CREATE OBJECT O_CONT1
       EXPORTING
         CONTAINER_NAME              = 'HEAD_CONT'.
     CREATE OBJECT O_CONT2
       EXPORTING
         CONTAINER_NAME              = 'ITEM_CONT'.
     CREATE OBJECT O_CONT3
        EXPORTING
          CONTAINER_NAME              = 'CUS'.
     CREATE OBJECT O_GRID1
       EXPORTING
         I_PARENT          = O_CONT1.
     CREATE OBJECT O_GRID2
       EXPORTING
         I_PARENT          = O_CONT2.
     CREATE OBJECT O_GRID3
       EXPORTING
         I_PARENT          = O_CONT3.
*--SHOW GRIDS
     CALL METHOD O_GRID1->SET_TABLE_FOR_FIRST_DISPLAY
       EXPORTING
         I_STRUCTURE_NAME = 'VBRK'
       CHANGING
         IT_OUTTAB        = IT_VBRK[].
     CALL METHOD O_GRID2->SET_TABLE_FOR_FIRST_DISPLAY
       EXPORTING
         I_STRUCTURE_NAME = 'VBRP'
       CHANGING
         IT_OUTTAB        = IT_VBRP[].
     CALL METHOD O_GRID3->SET_TABLE_FOR_FIRST_DISPLAY
       EXPORTING
         I_STRUCTURE_NAME = 'VBRP'
       CHANGING
         IT_OUTTAB        = IT_VBRP[].
   ENDIF.
ENDFORM.
Thanks,
Seshadri.

Report for equipment hierarchy using IH03

In IH03 what is the significance of the fields display as graphic and Bom Application and Bom group?
Edited by: Pallavi Kakoti on Jul 19, 2011 8:43 AM

Click "As Graphic" if you want to display equipment in graphical hierarchy.
BOM Application is used to display BOMs of specific application area in the equipment hierarchy report .If you choose "INST" as BOM application then only plant maintenance BOMs will be display in the equipment hierarchy,
BOMs can be defined for different application areas like plant maintenance ,production,costing etc
Regards,
Tehsin

Installing a printer color management for my mac using cc

Am having trouble printing, I am told I have no color management programme for my mac. What do I download?

You don't download anything. This is a configuration thing. Start by reading this and then take it from there using the links provided and an expanded web search:
My colors look different outside Photoshop. | Mylenium's Error Code Database
My printed colors look wrong. | Mylenium's Error Code Database
Mylenium

Printing WWI reports for an Accident using tcode CBIH102

Similar Messages

Maybe you are looking for