Priority of the components.

I m tryingto make a game program. firs i added panel1 to frame,then i added 2 small moving panels (panel2,panel3)to panel1 . when panel 2 is in front of panel3, when i click a part of panel3 iwant it all to be apperared. i m looking for a code like panel3.priority.....; how can i do this
thanks .
Edited by: errorist on Oct 25, 2008 8:53 AM

I am a bit confused about exactly what you are trying to do. I think that you might want to use CardLayout to help swap panels, but I'm not too sure.
A great resource that has helped me and will probably help you is an article entitled [How To Ask Questions The Smart Way|http://www.catb.org/~esr/faqs/smart-questions.html] . It will tell you how to formulate your questions so that the folks here will be better able to answer them. Good luck.

Similar Messages

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work. The QuickTime components necessary to view, edit, import and export various types of films are not installed. The components included in the iMovie installer. R

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.

Dear all,
I have trouble to connect em console to database instance. My database is 11.2.0.3 and before this I did the patching from version 11.2.0.1, and now i cannot get fully functionality of em console.
error is:
Enterprise Manager is not able to connect to the database instance. The state of the components are listed below.
It shows that agent is connected, database and listener is up.
I did recreation, dropping and recreating with emca, but no success.
Did anyone have similar problems with em console?
Regards,

You need to first of all, Connect to the Database as SYSDBA (because your were not connected), then start the database (because it is not started).
If you already used the username and password in the command prompt and you are sure that the database is already stared, then you need to set the ORACLE_SID before you open SQLPlus. This is because if SQLPlus does not know the SID you are connecting to, it simply thinks it is not up or has no service hence the message "Connected to an idle instance".

How to print the components in scrollpane

hi there,
can anyone tell me how to print the scrollpane components, i mean the headers & the main view of the component. i've a scrollpane with the following code and i want to print the components:
JScrollPane pane = new JScrollPane(aTextPane);
pane.setRowHeaderView(aLineNumberComponent);my requirement is i've a editor & lineno component as textpanes and added to scrollpane & when asked to print it should print the lineno component which resides in scrollpane's row header & the editor textpane which is the main view in the scrollpane. how can i achieve this?
i'd would appreciate any suggestions & codes given.
thanx in advance.

After adding/removing components to/from a panel try:
panel.revalidate();
panel.repaint() // sometimes this is also needed, I'm
not sure whyI'm not certain, but I think that panel.revalidate() implicitly calls repaint() only if something actually changed in the layout. If nothing changed, it sees no reason to repaint; hence, if something changed in appearance but not in layout, you have to repaint it yourself.
Or something like that. I'm no expert. ;)

How can I disable all the components in a JPanel?

I want to disable all the components( button, text field ) in a JPanel. I know I can search the panel and disable each of its children component recursively. Is there a better way to do this?

I want to disable all the components( button, text field ) in a JPanel.You haven't defined what you mean by "disable".
If you mean you want the component to be repainted in its disabled state, then you would need to set the property of each individual component to disable, which would imply some kind of recursion.
If you just want to prevent components from receiving key events and mouse events, then you can use a glass pane or maybe a panel with an overlay layout that contains a non-opaque panel that intercepts all events.

What are the components I need to install on my apps server

Hello All,
Our Oracle DB 10.1.0.3.0 is installed on Linux Server.
Oracle 10g Developer Site is installed on windows XP.
I have upgraded form & reports form earlier version 6.0..
Now I need to install Oracle Application Server on windows 2003 (x86) 32 bit.
I never done this b4.
My question is that ,
what are the components I need to install on my apps server to run Forms & Reports?
I am installing apps server on one machine.
But when I read documentation they said its better to install on two machine.
Regards,
Diana

Yes,
I'm sorry to tell you but for forms and reports (BI) you need to install almost everything, you need to install an infrastructure as first components, and then a midtier for AS with Business Intelligence option, in this second component you can chose to install Reports, forms, OCJ4, Portal, any other component you need or you thik you will need in the future.
You can install both in one Server if you don't have resources for 2 or 3 thinking on load balance. It works fine for me in one server but my operation is not too big.
Carlos

How to change the components of the planned order? (FM or BAPI)

I need to change the storage(LGORT) in the components.
I found only MD_PLDORD_CHANGE_COMP_ITEMS, but could not get the correct result.
Has anyone used this FM to change the components of the planned order?
Can you please tell how to use it. Or advise an alternative solution.

Hi Anton,
There's a BAPI to change planned orders - BAPI_PLANNEDORDER_CHANGE, but it allows to change only header data.
Therefore you'll have to go a bit longer, and use a couple of other BAPIs:
First read the order that you want to change - BAPI_PLANNEDORDER_GET_DETAIL
Second, create a new planned order with the changed data, based on the read planned order - BAPI_PLANNEDORDER_CREATE.
Third, delete the old planned order - BAPI_PLANNEDORDER_DELETE.
Regards,
Mario

How do i get the components when a new window opens from the main window?

In a given application, i am able to get the list of components for the main window. When an event happens in the main window, now a new window opens here how do i get the components for this newly opened window?

getContentPane().getComponents() can be used, only if i know that new class name thats been poped up when the event happens to that main window....
Is there anyway in runtime to know that new class name & fetch the event...

How to change the components in a visible JPanel?

How to change the components in a visible JPanel?
Is there any way to change the components in a JPanel while it is already visible in a JFrame? I tried the na�ve approach of removing the components and adding new ones, but the effect is not the expected.
For now I'm opening new frames with newly created panels.

After adding/removing components to/from a panel try:
panel.revalidate();
panel.repaint() // sometimes this is also needed, I'm
not sure whyI'm not certain, but I think that panel.revalidate() implicitly calls repaint() only if something actually changed in the layout. If nothing changed, it sees no reason to repaint; hence, if something changed in appearance but not in layout, you have to repaint it yourself.
Or something like that. I'm no expert. ;)

Use MF60 for split the components needs in a horizon of several days

Hi to all,
I'm working in my Industry to migrate the SAP system from a Repetitive mode to a Discrete one, and trying to launch the use of KanBan and MF60 usage, I'm not doing fine.
I want to launch MF60 usage, through the bases of using it to distribute the need of components reserve in a Process Order (or several) in a daily frequency.
I know it is possible to use the pull-list to propose only the replenishment quantity to be used in a time horizon given, for all Process Orders that uses "these" components.
I ask for guidelines, as I don't know if I need to start building Kan Ban signals through PK transactions, or if I need to reconfigure some Material Master Views, as for the moment I'm not able to split the need as it is only proposing me the overall need of the order, even though I have already upload Resources, Master Recipes and Schedules to obtain a distribution in the Process Order lifetime.
From what I know, the desire view to work on is the MF60 "Staging type: WM release order parts".
I'll appreciate any information, or documentation you can share
Regards,
David P

Hi Almeida and thanks for the response.
I'll try to explain myself in a practical way.
Now that it has being upload the Master Data in terms of resources and master recipes to work on a SAP Discrete mode, then I am working on the replenishment of components of the BOM's that are "signed" at the Process Order creation.
My current situation in an example will be: If I create a Process Order for a 7-day duration, it makes the components reserves for the total, nevertheless I want to configure "somewhere"-"somehow" in SAP to be able to use the MF60 transaction to distribute the needs in a given horizon.
With the scenario I have now, if I run the MF60 transaction for "that" order, no matter the horizon, it propose me the replenishment of the total need of the components minus the product already consumed. And even more, I only can run the MF60 with the "SLoc Level" view, and I have notice the distribution I need should be viewed under the "WM RelOrd. Parts" which is giving me a blank data result.
What will be my desire usage of the MF60, is to use it to propose me the needed components inside the given horizon, so if I give a 1-day horizon, and expect to get the components quantity for that day.
I hope, my issue is more clear now
Thanks
David P

Why do we need a Self Reference "me" to use the components of a class

Hi
I am not clear why do we need a self reference variable "me" to call the components of its own class? when it can be accessed directly as in the following examples?
In my first example below i can call the method display_name directly without creating a reference object or instance of the class within the class.
In the second example i am using the self refernce Write me->name to access the component of a class.
My question is why do we need "me" when i can use the components directly as shown in my first example.
CLASS egocentric DEFINITION.
PUBLIC SECTION.
    DATA:
     name(10) TYPE c READ-ONLY.
    METHODS set_name.
    METHODS display_name.
ENDCLASS.                    "egocentric DEFINITION
*       CLASS egocentric IMPLEMENTATION
CLASS egocentric IMPLEMENTATION.
METHOD set_name.
    MOVE 'Abap Objects' TO name.
    CALL method display_name.
ENDMETHOD.                    "write_name
METHOD display_name.
    write: name.
ENDMETHOD.                    "display_name
ENDCLASS.                    "egocentric IMPLEMENTATION
*Global Data
DATA oref TYPE REF TO egocentric.
START-OF-SELECTION.
CREATE OBJECT oref.
CALL METHOD oref->set_name.
CLASS egocentric DEFINITION.
        PUBLIC SECTION.
            DATA:
             name(10) TYPE c VALUE u2018Instructoru2019
READ-ONLY.
             METHODS write_name.
ENDCLASS.
CLASS egocentric IMPLEMENTATION.
        METHOD write_name.
            WRITE me->name.
        ENDMETHOD.
ENDCLASS.
*Global Data
DATA oref TYPE REF TO egocentric.
START-OF-SELECTION.
        CREATE OBJECT oref.
        CALL METHOD oref->write_name.

You can go WIKI and search with ABAP Objects.
Or do the same in 'advanced search' and select a search area. You are bound to find something.
Or this link perhaps:
[abap objects|http://help.sap.com/saphelp_nw70/helpdata/EN/ce/b518b6513611d194a50000e8353423/content.htm]

?-multiple screens transparent able to see all the components in all screen

iam developing a ui , in that i have to place multiple panels or multiple containers over the content pane where as every container should be transparent , and i should able to see all the component in all the containers in the top container , help me.

i want all the components in all the panels should be viewed on the top panel , i dont know whether to use card layout or different pane , suggest me I thought bbritta already suggested a [url http://java.sun.com/docs/books/tutorial/uiswing/components/layeredpane.html]LayeredPane. Did you investigate this?

ITunes Can't Be Installed Nor The Components Can't Be Uninstalled

iTunes Can't Be Installed Nor The Components Can't Be Uninstalled
I was trying to update my iTunes to the latest when I accidentally plugged off the computer. I switched on the computer back to check the iTunes, it says to re-install the iTunes whenever I click it, so I tried re-installing it (Both iTunes and Quicktime), but I'm having a hard time, it says (click the screenshot I made) all the time:
http://www.flickr.com/photos/62071999@N07/8366121669/in/photostream
Whenever I click retry, it doesn't do anything, so I had no choice but to cancel it.
http://www.flickr.com/photos/62071999@N07/8367188546/in/photostream
This suddenly appears when I click cancel.
http://www.flickr.com/photos/62071999@N07/8367188554/in/photostream
Was interrupted.
I saw alot of cases like this and had a successful ending, I tried what everyone is saying, but neither of it didn't work.
I tried repairing the Apple Mobile Device Support, here's what it says:
http://www.flickr.com/photos/62071999@N07/8367188486/in/photostream
http://www.flickr.com/photos/62071999@N07/8367188344/in/photostream
I uninstall it using the control panel but didn't work, instead I use the Ccleaner to fix the registry (I can't really see any files that are related to apple) and to uninstall it and it did was removed from the list but the files are still there.
I read in http://support.apple.com/kb/HT1923 that all programs should be uninstalled.
1. iTunes
2. QuickTime
3. Apple Software Update (Successfully Uninstalled)
4. Apple Mobile Device Support (Successfully Uninstalled but the files can't be removed)
5. Bonjour (Successfully Uninstalled but the files can't be removed)
6. Apple Application Support (iTunes 9 or later)
I already did uninstall listed above, but I still see their folders on my computer/program files. Whenever I try to delete it. it says:
http://www.flickr.com/photos/62071999@N07/8366121503/in/photostream
Bonjour (I opened all task manager's tab, never did saw any sign of these files, like it's plugin and so on)
http://www.flickr.com/photos/62071999@N07/8366121411/in/photostream
Apple Application Support (Which only contains Appleversions.dll)
Please help! I don't even know what to do unless I'll reformat my computer but I don't want to do that, I tried lots of things for my iTunes to work, none of them seemed to help me. I can't use my iPhone / iPad / iPod with musics and videos, it's just so boring without entertainment.
(Step-By-Step)
Thanks in advance!

I had the same problem this weekend. The iphone 4s needed Itunes10.5 to sync to her Asus Windows 7 Laptop. When I tried to download from the Apple website I got the error that the windows installer was missings files or something like that. I uninstalled itunes and tried again but that didn't work. Then I redownloaded itunes 10.3 just to have a working version in case I gave up. Then I found site that suggested I update Windows by going through the start menu and while doing that I found an update Apple itunes file.
Goto Start and type Widows Update in the seach window. Click on check for updates (I already was current with all updates but I suggest you download the updates if there are some available.
Goto start and this time just type update in the search window. Look for the Apple itunes update link and click on it. It found there were updates for itunes 10.5, Quick time, Safari, and Icloud. I checked all the updates except for Safari, since we don't use it (yet).
The install started then seemed to stall at one spot for ~3min but then completed successfully. I open itunes and had her synced with Outlook Contact, Email, Calender, and Notes in 5 minutes. I did already configure Outlook by going to tools and Trust Center.
I hope this works.

Show Error string for all the components in a form at a time

How do I show all the error strings for all the components in the form when the submit button is clicked?

This code answers your question:
<?xml version="1.0"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:Script>
    <![CDATA[
      import mx.events.ValidationResultEvent;
      import mx.validators.ZipCodeValidator;
      import flash.events.MouseEvent;
      public var v:ZipCodeValidator = new ZipCodeValidator();
      public var vResult:ValidationResultEvent;
      public function performValidation():void {
        v.domain = "US or Canada";
        v.listener=myZip;
        vResult = v.validate(myZip.text);
        if (vResult.type==ValidationResultEvent.INVALID) {
          myZip.dispatchEvent(new MouseEvent(MouseEvent.MOUSE_OUT));
          myZip.dispatchEvent(new MouseEvent(MouseEvent.MOUSE_OVER));
    ]]>
</mx:Script>
<mx:TextInput id="myZip"/>
<mx:Button label="Submit" click="performValidation();"/>
</mx:Application>
If this post answers your question or helps, please mark it as such. Thanks!
http://www.stardustsystems.com
http://www.stardustsystems.com/blog
Adobe Flex Development and Support Services

How I can erase the components that I have created in a content area?

hello. Somebody knows how I can erase the components that I have created in a content area. I have created an area of content and the archives, categorias or perspective that I generate not let erase. The same it happens to me to the forms, reports and other components created under a certain application

goto portal navigator --> content areas --> next to the content area --> click Edit Properties --> Items tab --> last button on the page is Purge..
this should take care of it

Priority of the components.

Similar Messages

Maybe you are looking for