Prob in entering custom wagetype in IT0008 and IT2010

I have created a custom wage type 9b01. It is supposed to be calculated based on the no of hrs entered for an employee and the amt should be calculated automatically.
I am successfully able to do that by entering this wage type in infotype 2010(and entering no of hrs) for an employee.
Now the problem is instead of entering it in infotype 2010 i want to enter it in basic pay IT0008 along with MB10. But in IT0008 , we are asked to enter the amt directly which I cant enter for 9b01(since it is to be calculated during payroll run automatically based on no of hrs).
Another reason why i want to enter it in IT008 instead of IT2010 is that in IT2010 it allows me to enter only 1 wagetype for an employee. In case if i have 2 custome wagetypes , i am not able to use IT2010 (since it doesnt provide me with the table control for entering wage type unlike IT0008)
THANKS

Hi Amber,
Concerned as to why you would want this wage type in IT0008-Basic Pay?  That infotype should contain the amount or pay rate the individual receives every pay day.  If you have an number of hours that will change each pay date, then you want to use IT2010 as you are or IT0015-Additional Payments.  Numbers can be entered into IT0015 and depending on how the wage type is configured and the payroll calculations set-up, you can achieve the same result of the payment for those hours entered.  Unless this number was fixed for every pay period, I would not recommend using IT0008.
Paul

Similar Messages

  • On and iPad how to Allow User To Enter Custom Text  (Dropdown only) Enables users to enter a value other than the ones in the list.

    On an iPad, how do I :
    Allow User To Enter Custom Text
    (Dropdown only) Enables users to enter a value other than the ones in the list.'?

    Are you using the built-in Currency option under the Format tab? If so,
    what you're describing should not happen.

  • ICSS_B2C Customer relogin problem "Enter a valid user id and password".

    Hi Gurus,
    In ICSS_B2C, I have login problem with the userid and password that i have created. I have maintained all necessary settings in XCM, reference user etc.,
    I have configured icss_b2c Admin with value "CRM_SU01UserID" for component usertype in http: //server:port/icss_b2c/admin/xcm/init.do.
    UserID is getting saved but when i try to relogin with the same, I am getting the message ""Enter a valid user id and password".
    I tried with alias, su01i
    Guide me Where all I can check to solve this?
    Thanks and points will be rewarded.
    urgent
    Srinivas.

    Hi
    The User Id that you have created, must have been assigned to a BP in the tcode BP and role BUP005.
    Goto the BP and check the Internet User tab
    The user name that you are suppose to use is the one mentioned in the Internet User field in the Logon data dataset.
    Hope this helps
    Regards
    Rekha Dadwal

  • Problem in copying wagetype into IT0008 using Dynamic Action for IT0015

    Hi All,
    My requirement is based on the Number/ Unit the user enters on the IT0015 screen in the PA30 transaction ,I have created a dynamicaction that will fetch the corresponding wage type from a table T511K and display the screen of IT0008 where the BEGDA would be the Date of Origin of IT0015 and a new record should be added to the already existing wagetypes of IT0008.
    I have already created the dynamic action and the BEGDA is getting correctly fetched from the IT0015's Date of Origin. However, I am in doubt as to how to add the corresponding wage type from table T511K in the already existing wagetypes of IT0008. Please help me. Points would be rewarded.
    If possible could you please provide the code for it.
    Regards,
    Rahul Agrawal.

    Rahul  Technically speaking this can be achieved by any way but would like to share you the nature of wage types which comes in IT0015 and IT008 completely differs functionally along with Respective infotypes Ie The wage types in 15 will be a irregular wage type and in IT0008 Regular wage type and IT0015 have Time constraint 2 and IT0008 have TC 1
    So would like you to check once with your functinal before going to the development

  • How do I enter an event in Calendar and repeat it every 3rd day

    How do I enter an event in Calendar and repeat it every 3rd day

    Hello PatrickMaryAnn,
    Thanks for the question, and welcome to Apple Support Communities.
    When editing or creating an event, choose Repeat > Custom… - then choose "Daily" and enter Every 3 days.
    Calendar: Update or delete an event
    http://support.apple.com/kb/PH11509
    Thanks,
    Matt M.

  • DropDown List issue in saving user entered custom value to dropdown : WDJ

    Hi Experts,
    I have a dropdown list that is say prepopulated with 2 values, by clicking "allow custom entry" I can enable the user to type in a value if he doesnt want to choose from existing options.
    I am trying to add the user entered value to the dropdown list by using the "addItem()" script appropriately.
    Issue is that though the new value is getting saved, once the users saves and closes the form, opens again and adds a new user entered value then this new value overwrites the previously entered custom value.
    I see that the user entered value doesnt get bound to the dropdown.
    I have bound this dropdown field to an appropriate web dynpro java context attribute.
    Please provide any solutions if known!
    I am using NWDS 7.0.14, ALD 7.1 and Reader 8.1
    Thanks,
    Lisha

    Closing the post.

  • Customer Clearing Process - Partial and Residual

    Hi Gurus,
    Appreciate if you can please help me in understanding customer clearing process in case of partial and residual payment. And how will it have impact on AR Aging.
    If we post customer invoice for $1000 and there is a payment of $600. Now if we use residual payment option, system should show $400 line with aging according to original invoice. But i cant see that if i go to FBL5N.
    Please tell me how it works,
    Thanks

    Hi,
    During the partial payment the new document gets created.
    You can do one thing go to table BSAD and in the invoice reference (REBZG) field enter the original document number and execute.
    You will get the residual document number (AUGBL). Check whether you are getting this document number in agewise report.
    Hope your issue has been resolved else revert.
    Regards,
    Tejas

  • FSCM - NO Enter customer contact/Telephone icon in UDM_supervisor/Worklist

    Hi All,
    Subj : FSCM - Enter customer contact or telephone  icon in  Worklist (UDM_supervisor)  screen.
    Sometimes when i go into my worklist and process receivables of any customer, i could not see "Telephone" icon or "Enter Customer Contact" icon (is NOT displayed or MISSING from the screen).
    This is happening occasionally, not always.
    We searched for OSS notes, but no avail.
    This is a production issue. timely help is greatly appreciated.

    Hello
    This thread seems old so may be it has a solution. I am experiencing a similar issue.
    We are not synchronizing contact persons from customer master to business partners. We will create the contact persons in business partners locally. I created a contact person in business partner master data screen and assigned a relation with a customer.  But then it does not get populated in the 'Get Contact person- Contact person in Coll mngt' pop-up window'
    Any thoughts on why this would happen.

  • Enter Customer Invoice

    Hello,
    can anyone explain to me what is the main difference between enter incoming invoice MIRO and enter customer invoice F-22. pros & cons ?
    and what I need to set up to be able use F-22.
    I know that this is probably a very brod question, but any hint will be appreciate.
    thank you
    D.

    Hello,
    MIRO is vendor invoice through MM (Equivalents are F-43 or FB60 from FI side)
    F-22 is customer invoice
    Pre-requisites
    Customer Creation
    Number ranges
    Document Types
    Regards,
    Ravi

  • Entering Customs Declaration after GR

    Where in configuration are the options on the "Customs Processing - Import/Export" screen set for dropdown values within the "Enter Customs Declaration after GR" menu? Depending on which FTO I have selected, different options are available under this menu. In some FTOs, such as one representing the U.S., there are no options available. What configuration do I need to make in order to make entering Customs Declarations after GR available for these FTOs?

    Please don't take this the wrong way, but you really would not want GTS to accommodate any SAP processes that are not best practice.  You should define your customs valuation as part of your SD pricing procedures, typically using the statistical value (GRWR).  This value would be calculated at sales order time and then copy (or get repriced) to the billing document.  This is how SAP "hopes" you deal with valuing free-of-charge shipments.
    I do understand that we can't all follow best practice, but when you don't the answer is always the same:  implement custom code to support your deviation from SAP best practice.  In this case, you would have find a way to force changes made to an existing billing document to its associated customs declaration in GTS.  I'm pretty sure there is no BADI for billing document changes (like there is for sales order and delivery changes).
    Also, you would not "cancel" the proforma document in SAP to have it regenerate, but you would "complete" it.  This will delete the associated customs declaration in GTS.

  • How to create customer material information(vd51) and what is it's use

    how to create customer material information(vd51) and what is it's use.
       does it will work even in mm module also??
      my requirement is such that...
    my sap code is 235
    where as customer will give purchaase order on code 536.when i am entering this 536 code  in my system,automatically sytem should propse my sap code of 235.subsequently my inventory should reduce.

    Hi,
    the transaction for maintaining the customer material inforecord is VD51.Data on a material defined for one specific customer is stored in the customer material information records.
    Features:
    During order entry, items can be entered by specifying the material number used by the customer. You also enter a customer material number in the order view of the sales order. You can then use both material numbers during the order entry, the material number your company uses or the one defined by the customer, because the system can carry out allocation automatically.
    If you maintain the plant in the customer material info record, the system will give priority for the plant maintained in the CMIR in the order.
    Prase

  • How to enter customer specific material description

    Tried MM02 - basic data for Language EN, but then all customers with language EN get this description.
    Tried MM02 - Sales Text but then all customers created in this salesorganization get this description.
    Would like to enter customer specific material description. Unfortunately VD52 is limited to 35 characters, need about 80 characters.
    Regards Andy

    Thanks RAF,
    I noticed I needed to use the button addtional text as well in VD52, though this is limited to 72 characters and not unlimited. Now I'm facing the issue that the commercial invoice is not printing all characters defined in this field, so probably have the layout increase field length.
    Thanks for the help.
    If there is another solution to define a Customer specific materail description then mentioned above I would like to know.
    Regards Andy

  • How to enter customer budget in ECC customer master record.

    Dear all,
    How to enter customer potential sales values in customer master record - XD01.
    We are into retail sector having 10 different merchandise categories. our management want to enter customer potential sales for all 10 categories in customer master record itself.
    with the help of these potential sales field values we want to take a ALV report to compare sales against to potential sales for each category.
    Please suggest us to find out the right solution for this requirement. Your suggestions will be highly appreciated.
    Thank you
    Raghu ram.

    Thanks RAF,
    I noticed I needed to use the button addtional text as well in VD52, though this is limited to 72 characters and not unlimited. Now I'm facing the issue that the commercial invoice is not printing all characters defined in this field, so probably have the layout increase field length.
    Thanks for the help.
    If there is another solution to define a Customer specific materail description then mentioned above I would like to know.
    Regards Andy

  • Purchased software download card for Adobe photoshopelements13 and adobepremiereelements13 at my campus bookstore on Friday morning Oct 31.  Went through the process of entering product/serial numbers etc. and became "verified".  Downloaded the product (~

    Purchased software download card for Adobe photoshopelements13 and adobepremiereelements13 at my campus bookstore on Friday morning Oct 31.  Went through the process of entering product/serial numbers etc. and became "verified".  Downloaded the product (~2 hours in time), the proceeded to install.  At this - THIS point I was "told" I needed the 64 bit version (I have a 64 bit Lenovo T431s laptop).  My patience wearing thin... I returned to the Adobe site from which I had done everything to this point.  NOTHING with regard to a choice of 32 or 64 bit!  Looked closely at the info that came with the download card... again, nothing regarding 32 or 64 bit option.  Outlined this matter to Identit-e customer service... they said I need to contact Adobe.  Adobe site does not make it easy to do that.  Anyone have a solution and/or a suggestion?

    You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    Adobe Photoshop Elements 13 Direct Download Links, Premiere too | ProDesignTools

  • Customer Statement with opening and closing balances

    Dear Forum,
    The users want to generate the Customer Statement with opening and closing balances like the traditional one. The statement now generated gives the list of all open items as on date, but the users want the statement with opening balances as on the date of the begining of the range specified and the closing balance at the end of the period for which the statement is generated. Is there a way to generate the same from the system.
    Thanks for the help.
    Regards,

    Hi,
    SPRO> Financial Accounting (New) > Accounts Receivable and Accounts Payable > Customer Accounts > Line Items > Correspondence > Make and Check Settings for Correspondence
    You can use the program RFKORD10 with correspondance type SAP06 for your company code
    This program prints account statements and open items lists for customers and vendors in letter form. For account statements, all postings between two key dates, as well as the opening and closing balance, are listed.
    Regards,
    Gaurav

Maybe you are looking for