Probelm of displaying alv fields in Spool display

In report using alv grid,
i am able to see all columns in normal output displauy
but in spool display some last columns are not displaying,
so what could be the problem?
Edited by: samdup on Apr 9, 2010 1:51 PM

In your print spool, check the spool no. you want to print.
Then click on the small print button (Shift F1 - print with changed parameters).
At the bottom of the pop up screen, under spool request, you may need to adjust your Format to view more columns. Mine is currently set to X_65_200 and it just depends on what print devices you have set up. You can give this a try to see it helps or not.
Good luck,
Cindy

Similar Messages

Decimal Value display in ALV Field display

Hi Expert,
I need to dispaly one ALV Field "Routine Work Hour" value up to 2 decimal place in ALV output i.e if value is 2.5 then it should display as 2.50.The field which refers to this is ISMNW and the database table is AFRU.Now if this value is maintained in MINUTE unit, then code converts into HOUR unit and correctly outputs to ALV output up to 2 decimal after i changed the field decimal lenght.But for the value which is mainatined in HOUR unit, it correctlty populated into the final internal table upto 2 decimal and this table data while passing into FM " REUSE_GRID_DISPLAY" it only outputs upto 2 deciamal value for the value which is maintained as MINUTE unit in database table AFRU in ALV output, but for other value(Which are maintained in HOUR unit in table AFRU) it still shows 1 decimal length.But the internal table correctly populates these values up to 2 decimal for all unit of work(MINUTE/HOUR) while passing though this above FM.
Please advise where i need to look into.
Thanks

hi,
pass these parameters to fieldcatlog.
e.g.
Fcat-ref_fieldname = 'ISMNW'.
fcat-ref_tabname = 'AFRU'.
fcat-decimalsout = 2.
Hope this will help you.
Regards,
Vijay

ALV grids to spool

Hi All,
I am working on ALV's .I have 3 ALV grids in one screen . I want to send these 3 alv grids to spool.
I am running this in back ground.I am using classes to display the LAV grids.
Is it possiable to display the 3 ALV grids to spool.
Thanks,
Swapna.

Hi,
In the structure to be passed to the parameter u201Cis_printu201D of the method u201Cset_table_for_first_displayu201D.
The print output of the field u201CPRNTLSTINF--> ALV control: Do not print list informationu201D is not visible in the print preview of the ALV Grid. If you create a spool request first, you can check the final list layout in transaction SP01.

1000 CHARACTER TEXT IN ALV FIELD

Hi Experts,
I have a String type variable containing 1000 character text that I am passing in a field on ALV. But ALV field can display on 132 characters. So now my requirement is that when a user double clicks on that field... then a popup or a screen appears where the user can read the entire text of that field.
I have tried some FMs (like POPUP_TO_CONFIRM, POPUP_TO_INFORM, POPUP_DISPLAY_TEXT etc...), but all have length restriction.
Please suggest if there is any FM to get the entire 1000 character text on a popup.... OR if there is any other way to do this...
Thanks in advance
Regards,
Ashish Goyal

I am using this code provided by you, facing error : Field "OB_GUI_DIALOGBOX_CONTAINER" is unknown. It is neither in one of   the specified tables nor defined by a "DATA" statement.
Please take a look and suggest.
Using REUSE ALV GRID to display ALV.
   TYPES: BEGIN OF tp_text_x .
TYPES: tdname      TYPE thead-tdname ,
       tdobject    TYPE thead-tdobject ,
       tdid        TYPE thead-tdid ,
       tdspras     TYPE thead-tdspras ,
       tdtxtlines TYPE thead-tdtxtlines .
TYPES: tdline      TYPE tline-tdline ,
       it_tline    TYPE tline_tab .
TYPES: END OF tp_text_x .
CLASS cl_event_reciever DEFINITION DEFERRED.
DATA v_event_reciever TYPE REF TO cl_event_reciever.
CLASS cl_event_receiver DEFINITION .
PRIVATE SECTION.
    METHODS: close
             FOR EVENT close OF cl_gui_dialogbox_container
             IMPORTING sender.
    METHODS: init_container .
    METHODS: display_textedit
             IMPORTING value(st_text_x) TYPE tp_text_x .
ENDCLASS .                    "cl_event_receiver DEFINITION
CLASS cl_event_receiver IMPLEMENTATION.
METHOD close .
    CALL METHOD sender->set_visible
      EXPORTING
        visible = abap_false.
ENDMETHOD .                    "handle_close
METHOD init_container .
*    DATA: ob_gui_dialogbox_container TYPE REF TO cl_gui_dialogbox_container.
    IF ob_gui_dialogbox_container IS NOT INITIAL .
*    IF EDITOR_CONTAINER IS NOT INITIAL .
      me->close( EXPORTING sender = ob_gui_dialogbox_container ) .   " EDITOR_CONTAINER ).
    ENDIF .
    CREATE OBJECT ob_gui_dialogbox_container
      EXPORTING
        parent   = cl_gui_container=>screen0
        top      = 40
        left     = 200
        lifetime = cntl_lifetime_dynpro
        width    = 600
        height   = 100.
ENDMETHOD.                    "init_container
METHOD display_textedit .
    me->init_container( ) .
    DATA: ob_gui_textedit TYPE REF TO cl_gui_textedit .
*    DATA: ob_gui_dialogbox_container TYPE REF TO cl_gui_dialogbox_container.
    CREATE OBJECT ob_gui_textedit
      EXPORTING
        parent = ob_gui_dialogbox_container.
    CALL METHOD ob_gui_textedit->set_readonly_mode
      EXPORTING
        readonly_mode = cl_gui_textedit=>true.
    DATA: it_tdline TYPE TABLE OF tdline .
    DATA: st_tdline LIKE LINE OF it_tdline .
    FIELD-SYMBOLS: <st_tline> LIKE LINE OF st_text_x-it_tline .
    LOOP AT st_text_x-it_tline ASSIGNING <st_tline> .
      APPEND <st_tline>-tdline TO it_tdline .
    ENDLOOP .
    CALL METHOD ob_gui_textedit->set_text_as_stream
      EXPORTING
        text = it_tdline.
ENDMETHOD.                    "display_textedit
ENDCLASS .                    "cl_event_receiver IMPLEMENTATION
INITIALIZATION.
CREATE OBJECT v_event_reciever.
DATA: ob_gui_dialogbox_container TYPE REF TO cl_gui_dialogbox_container.
CREATE OBJECT ob_gui_dialogbox_container.
START-OF-SELECTION.
v_event_reciever->display_textedit( EXPORTING st_text_x = <st_alv_data_1>-text_1 ) .

Hi, i have doubt in alv field cat log

1)In alv field cat preparation (i dont want to display for one particular field in output screen) can u pls send me the code.
2)in field cat for a particular field i want to display in different color for that can u send me code.
3)code for (DOUBLE CLICK) event.
for the can u send me a code
Regards,
Nagesh

Hi Nagesh,
I think you have posted your question in the wrong forum, this forum is for education related topics only. Please review the existing forums and re-post it to the appropriate one.
Regards,
Simon

ALV field, max length?

Hello all,
When entering data on the screen into the ALV, field VALID will allow only 128 characters. But the field has 255 characters.
Is the max field lenth in an ALV 128 characters?
The fieldcat has these values for field VALID:
DATATYPE        char
INTLEN               255
DD_OUTLEN     255
The Layout has just 2 fields populated, ZEBRA and GRID_TITLE.
Here is the bits of code I'm using.
DATA: w_container TYPE scrfname VALUE 'ZCONTAINER1',
      w_grid TYPE REF TO cl_gui_alv_grid,
       w_custom_container TYPE REF TO cl_gui_custom_container.
DATA: i_alv TYPE TABLE OF zalv_zfxxu004. " ALV table - displayed
DATA: w_outtab TYPE zalv_zfxxu004.           " ALV table row
*zalv_zfxxu004 is a structure with the following fields.
*AUFNR CHAR     12
*BUKRS CHAR     4
*KTEXT CHAR     40
*VALID CHAR     255
           Create an instance of the container displayed on screen 100
CREATE OBJECT w_custom_container
         EXPORTING container_name = w_container.
           Create an instance of the grid displayed in the container
CREATE OBJECT w_grid
         EXPORTING i_parent = w_custom_container.
CALL METHOD w_grid->set_table_for_first_display
    EXPORTING
      i_bypassing_buffer   = 'X'
      is_layout            = l_layout
      it_toolbar_excluding = lt_exclude
    CHANGING
      it_fieldcatalog      = il_fieldcat
      it_outtab            = il_outtab.
Any thoughts?
Thanks
Bruce

Hello,
Check SAP note 857823.
This is the standard system behavior and cannot be changed.
Regards,
David

Regarding ALV Field Catalogue

Hi ,
Checked in the forum for this issue. => Not a wise plan to hoodwink the Moderators.
Could not find any.Guide me.
SAY i have a table CRICKET with 2 fields
1) PLAYER
2) SCORE
Records are say::
PLAYER    SCORE
SACHIN     50
RAHUL      40
SEHWAG 100
In Selection Screen, i have a field PLAYER.
a)If user enters value SACHIN in field PLAYER..
output shd be:
SACHIN
50
b)If user enters value SACHIN,RAHUL,SEHWAG in Selection screen,
output shd be
SACHIN     RAHUL   SEHWAG
50             40             100
Mean to say dynamically creating the fields based on inputs entered by user.
In ALV field catalog there is option NO_OUT ='X' to hide the fields.
But not able to get how to compare with values entered by user.
Edited by: kishan P on Oct 5, 2010 2:38 PM

Hi manju
suppose you have a table(itab) in which you have all the data related to player and the score.
before displaying the data to ALV apply the condition like:
fetch score from DBTABLE into table itab where player in s_player.
where s_player is your select option.
and then pass your ITAB to ALV.
i hope it will work.
Thanks
Lalit Gupta

Error in updating ALV field catalog in selection tool for Planning Book

Hi ,
I am Implementing BADI '/SAPAPO/SDP_SELECTOR' to upload Custom Fields Data in Planning Book Selection Window under APO Location Product. These Custom Fields are maintained in Custom Table.So from Table whatever Custom Fields are availabe all the fields needs to be available in for selection. Once selection is done the same data to be uploaded into Planning Book.
This BADI is working Fine upto 4 fields but if any extra fields are added in the table 'Error in updating ALV field catalog in selection tool' error Pop Up is coming. Here i am using Folloowing Methods
1). INIT_OBJECT_LIST
2). F4
3). LOC_PROD_VALUE_LIST
Please help on the same if u have any idea or clue.
Thanks.

Hi Srinivas!
Where did you get your implementation from?
It would be nice if you could debug your code!
For the F4 method, have you seen this note?
Note 544904 - Sample source code f.BAdI /SAPAPO/SDP_SELECTOR ('F4'method)
Also check this note. It contains selection modifications in the BAdI:
Note 376902 - SDP selector: Basis corrections for BADI
I do not know your release and support package in your SCM, but you can find a lot of notes related to this BAdI.
Thank you!
Will
SCM Support Consultant

Error in updating ALV field catalog in selection

Dear all,
I'm trying to use the standard transaction /SAPAPO/TSKEYFMAIN in order to check the TS values.
After filling the selection variant, the system shows the following error:
'Error in updating ALV field catalog in selection'
Could you please provide me with further details about the error? What could be the possible solution to avoid it?
Many thanks,
SM

Hi Marius,
thanks for your answer.
I would like to use the /SAPAPO/TSKEYFMAIN transaction to check massively the values in the time series KFs and not just the consistency of them.
So do you know any other transaction to do it or do you have an idea about the error of /SAPAPO/TSKEYFMAIN?
Thanks for your help!
SM

Error in ALV : Field Does not exists in Output table .

Hi All,
In my ALV report, program get dumped and showing error when i tried to put a col named Distribution channel ion the alv.
I have put the Distribution cannel field in the IT_FInal table , but still getting folwong errors :
Error : Field Symbol is not been assigned.
As Instructed i have passed I_INTERFACE_CHECK = 'X'.
By this i am getting detail error that :
Field Distribution channel does not exists in Output table & Heading for List is missing .
But i have maintained the distribition channel in IT_Final table
Please suggest wheather we have to define dis channel in any other place.
Thanks in advance.
Can any one help me regrarding this.
Thanks in advance.

Hello,
You have to populate the same in the fieldcatalog as well, i think you have not maintained this field there.
BR,
Suhas
PS: Also make it a point to follow-up on your previous post: [Error in ALV : Field Symbol not been assigned.|Error in ALV : Field Symbol not been assigned.]

Alv field with f4 help without using class

Hi,
Can any one give me a program of "Alv field with f4 help without using class".
Thanking you in advance.

hi
<b>Linking F4 Help to Fields</b>
For the last section, we will deal with linking F4 help to fields. It is easy. As usual, define, implement and register the event onf4 at proper places in your code. For F4 help, you must register the fields whose F4 request will trigger the onf4 event. For this you must prepare a table of type LVC_T_F4 and register this table using the method register_f4_for_fields. While preparing table you must include a line for each field which will trigger F4 event. For each field in the structure;
􀂾 Pass the fieldname to FIELDNAME
􀂾 Set REGISTER to make the field registered,
􀂾 Set GETBEFORE to provide field content transport before F4 in editable mode
􀂾 Set CHNGEAFTER to make the data changed after F4 in editable mode.
DATA: lt_f4 TYPE lvc_t_f4 WITH HEADER LINE .
lt_f4-fieldname = 'PRICE'.
lt_f4-register = 'X' .
lt_f4-getbefore = 'X' .
APPEND lt_f4 .
CALL METHOD gr_alvgrid->register_f4_for_fields
EXPORTING
it_f4 = lt_f4[] .
Preparing table for the fields to be registered to trigger F4 event
METHOD handle_on_f4 .
PERFORM f4_help USING e_fieldname es_row_no .
er_event_data->m_event_handled = 'X' .
ENDMETHOD .
A sample onf4 method implementation
Again, we set the attribute er_event_data->m_event_handled to prevent further processing of standard F4 help.
regards
Ravish
<b>
reward if useful</b>

Exception while creating f4 help for editable alv field

     hi experts
i have created search help for editable alv field by following link
http://scn.sap.com/docs/DOC-39832
But i m getting an exception : Field symbol has not yet been assigned.
exception area code
   read table <tab1> into <ls_wa> index i_row_id.
    assign component m_cl_variant->ms_layout-stylefname
           of structure <ls_wa> to <l_field>.
    read table <l_field> into ls_style
            with table key fieldname = is_col_id-fieldname.
    if sy-subrc eq 0.
      if ls_style-style o mc_style_enabled.
        ready_for_input = 1.
        exit.
      elseif ls_style-style o mc_style_disabled.
        ready_for_input = 0.
        exit.
      endif.
first read statement is giving sy-subrc =4.
PS: exception from method..:IS_READY_FOR_INPUT
kindly help

Hello Ankush,
read table <tab1> ASSIGNING <ls_wa> index i_row_id.
IF <ls_wa> IS ASSIGNED.
    assign component m_cl_variant->ms_layout-stylefname
           of structure <ls_wa> to <l_field>.
    read table <l_field> into ls_style
            with table key fieldname = is_col_id-fieldname.
    if sy-subrc eq 0.
      if ls_style-style o mc_style_enabled.
        ready_for_input = 1.
        exit.
      elseif ls_style-style o mc_style_disabled.
        ready_for_input = 0.
        exit.
      endif.
ENDIF.
Regards,
TP

New ALV field is not displaying

Hi
I have added the currency field in the existing ALV report.
The final internal table having the currency field and it has value. Curreny field is not displaying in output. Pls help
Below is my ALV code for currency.
PERFORM FILL_FIELDCAT USING
'WAERS' SPACE SPACE 'CURRENCY' 'CURRENCY' 'CURRENCY'.
READ TABLE GIT_FIELDCAT INTO LX_FIELDCAT
          WITH KEY FIELDNAME = 'WAERS' .
LX_FIELDCAT-OUTPUTLEN = 5.
LX_FIELDCAT-JUST       = 'L'.
MODIFY GIT_FIELDCAT FROM LX_FIELDCAT INDEX SY-TABIX.
FORM FILL_FIELDCAT USING    P_FIELDNAME
                            P_NO_OUT
                            P_DO_SUM
                            P_SELTEXT_S
                            P_SELTEXT_M
                            P_SELTEXT_L.                    "#EC *
DATA: LX_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
CLEAR LX_FIELDCAT.
LX_FIELDCAT-TABNAME    = 'GIT_LIST'.
LX_FIELDCAT-FIELDNAME = P_FIELDNAME.
LX_FIELDCAT-NO_OUT     = P_NO_OUT.
LX_FIELDCAT-DO_SUM     = P_DO_SUM.
LX_FIELDCAT-SELTEXT_S = P_SELTEXT_S.
LX_FIELDCAT-SELTEXT_M = P_SELTEXT_M.
LX_FIELDCAT-SELTEXT_L = P_SELTEXT_L.
APPEND LX_FIELDCAT TO GIT_FIELDCAT.
ENDFORM.                               " FILL_FIELDCAT

You have to [maintain maintenance dialog|http://help.sap.com/SAPHELP_NWPI71/helpdata/EN/a7/513484407a11d1893b0000e8323c4f/frameset.htm] as described in the link.
Regards,
Raymond

Alv field no display

Hi All,
I am displaying a list using alv hierarchy report and I dont want the fields at the item level to diplay. I am using the fieldcat-tech = 'X' for this. Its working butthe allignment of the fields is getting disturbed. How can it be displayed properly. One more issue is how can i display a value in the list as a delete icon if the value of the field is 'X'. I know there is a icon field in field cat ..I dont know how to get that particular icon in place. Could somebody please help.
Thanks,
Kiran.

HI.
Pls use ALV grid if you dont want item level.
alv hierarchy report for when we need header and line item .
refer this porg
BCALV_TEST_HIERSEQ_LIST
BCALV_TEST_HIERSEQ_LIST_EVENTS
Reward all helpfull answers.
Regards.
Jay

To display variable date in the ALV field header

HI all,
I have an ALV list and one of the field headers is "Total received till 14.03.2008".
Now the date field here is variable. it is being fetched from an internal table and displayed in thee field header of an ALV list.
cud y'all pls tell me how to display this variable date.
thanx,
pk

Hi,
Just have a look on the following code,i hope this is enough to
meet your requirement.
type-pools: slis.
data: x_fieldcat type slis_fieldcat_alv,
      it_fieldcat type slis_t_fieldcat_alv,
      l_layout type slis_layout_alv,
      x_events type slis_alv_event,
      it_events type slis_t_event.
data: begin of itab occurs 0,
      vbeln like vbak-vbeln,
      posnr like vbap-posnr,
      male type i,
      female type i,
     end of itab.
select vbeln
       posnr
       from vbap
       up to 20 rows
       into table itab.
x_fieldcat-fieldname = 'VBELN'.
x_fieldcat-seltext_l = 'VBELN'.
x_fieldcat-tabname = 'ITAB'.
x_fieldcat-col_pos = 1.
append x_fieldcat to it_fieldcat.
clear x_fieldcat.
x_fieldcat-fieldname = 'POSNR'.
x_fieldcat-seltext_l = 'POSNR'.
x_fieldcat-tabname = 'ITAB'.
x_fieldcat-col_pos = 2.
append x_fieldcat to it_fieldcat.
clear x_fieldcat.
x_fieldcat-fieldname = 'MALE'.
x_fieldcat-seltext_l = 'MALE'.
x_fieldcat-tabname = 'ITAB'.
x_fieldcat-col_pos = 3.
append x_fieldcat to it_fieldcat.
clear x_fieldcat.
x_fieldcat-fieldname = 'FEMALE'.
x_fieldcat-seltext_l = 'FEMALE'.
x_fieldcat-tabname = 'ITAB'.
x_fieldcat-col_pos = 3.
append x_fieldcat to it_fieldcat.
clear x_fieldcat.
x_events-name = slis_ev_top_of_page.
x_events-form = 'TOP_OF_PAGE'.
append x_events to it_events.
clear x_events .
l_layout-no_colhead = 'X'.
call function 'REUSE_ALV_LIST_DISPLAY'
exporting
    i_callback_program       = sy-repid
    is_layout                = l_layout
    it_fieldcat              = it_fieldcat
    it_events                = it_events
tables
    t_outtab                 = itab
exceptions
    program_error            = 1
    others                   = 2.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
          with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
form top_of_page.
*-To display the headers for main list
    format color col_heading.
        write: / sy-uline(103).
    write: /   sy-vline,
          (8) ' ' ,
               sy-vline,
          (8) ' ' ,
               sy-vline,
          (27) '***'(015) centered,
               sy-vline.
    write: /   sy-vline,
          (8) 'VBELN'(013) ,
               sy-vline,
          (8) 'POSNR'(014) ,
               sy-vline,
          (8) 'MALE'(016) ,
               sy-vline,
           (5) 'FMALE'(017) ,
           (10) sy-datum,
               sy-vline.
    format color off.
endform.
Reward points,if it is useful.
Thanks,
Chandu.

Probelm of displaying alv fields in Spool display

Similar Messages

Maybe you are looking for